Dongle not found in Device Manager

Similar Questions

• No sound. Audio device not found in Device Manager.

  Original title: where no sound is

  I can't install audiodrivers for msi ms-7267 VER: 5.0 mainboar. I had tried to unistal and install again, but he can not yet found on legacy manages the window.

  What should do? I have no sound?

  Best regards, Modestas

  Hello

  Step 1: Run Microsoft fix it. This automatically the diagnosis and repair of problems with devices when Device Manager does not detect your hardware, audio, USB, or other devices, or when your devices are disabled or does not.

  Click on this link to run the fix it: http://support.microsoft.com/mats/hardware_device_problems/en-us

  See also: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-sound-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/sound-cards-frequently-asked-questions

• Inspiron 1545 Webcam not found in Device Manager

  My integrated Webcam has a message "Please plug in a supported device."  I have updated all imaging software but could not suddenly a video call in Skype.  When I went to the Device Manager, I found that the Wedcam is more listed.  As my computer is now out of warranty, I can't contact Dell support on how to troubleshoot or fix the problem.

  I sweep Dell issues & received a message there is no webcam installed.  In recent months I have last access to the webcam so I don't know when the last, this has worked but was not serious in August 2013.

  Anyone know how to solve the problem?  The only advice locally was the technology will have to send them out to diagnose the problem & could not give an estimate of the cost.  When this computer crashed EXACTLY 1 week after the expiry of the extended warranty & $299, I spent with Dell to replace the hard drive in October 2012, I will not buy another guarantee.  The cost related to repair in time for 90 days & then Dell wanted me to take an another $299 for an extention of the year.  Third party repairs have been made and the computer had to be shipped back twice before it worked correctly.

  Any help is appreciated!

  Nancy

  Hi Nancy,.

  Consult the following link which has steps to solve the problem:

  http://Dell.to/18tJTi2

  If the webcam is not dectected in the Device Manager, we need to replace the webcam.

  If the problem persists, run the diagnostics on the webcam.

  http://Dell.to/15eT5VI

  Under the component select camera and click Run diagnostics.

  As the warranty has expired, you will need to contact our team of warranty repairs has expired which can provide information on the price of parts and replacement: http://dell.to/14UCPMK (for customers in the United States).

  Waiting for your answer!

• Treo 800w not found in Device Manager and does not connect to ActiveSync

  I just got my Treo 800w and I have ActiveSync it once.  After that, I had a lot of trouble trying to get activesync to say that it was connected to the computer.  After doing some research on Google and help forums looking around, I discovered that the Treo should appear in my device manager when you are connected to the computer.  I went to my device manager and of course, it wasn't there.  After a lot of time trying to make it work, I found that the best thing to do is remove the battery and plug it in again.  Then the computer will find again.

  However, I also learned what was causing my problem and I don't know if it's a windows or a problem of palm, but it is a question.  If you connect a Treo 800w on a WinXP (I don't have Vista so I don't know if this problem exists) and even if you touch it connected the power button on all Windows POPs a message saying a USB device has malfunctioned and will cease to recognize the device.  I then told my wife (the main user of the Treo) to never touch the power button and even less the Treo at all while it is plugged into the computer.

  If this question has already been posted... I'm sorry that I'm not looking for it...

  If you read my entire post it says I already found the solution.  Try all the things you listed didn't work for my problem.  I write only because I believe that it is a bug/problem with palm or windows and the device.  Take the battery, put the battery back in, and reconnect the unit is the only thing that works.

  I also tried to uninstall ActiveSync, reboot, install ActiveSync and the battery... it works too, but it's much faster to just remove the battery then put it back and reconnect the device.

  To answer your other question on ActiveSync Yes, I've got 4.5.

  Message is about: Treo 800w (Sprint)

• Satellite A500-17 x - wifi does not work - not found in Device Manager

  Hi people,

  I need help please.

  My wireless adapter does not work.
  It worked perfectly until I connected to a wired connection in a hotel I was staying in and since then I can not connect to my wireless router.

  I tried restoring the tosystem several times to old dates, but it has not solved the problem. When I restart the computer laptop and go into devices and printers, I thought that the computer needs to be troubleshooted.

  The program runs and try to install the driver for the Wlan but returns with errors. Namely, windows could not load the driver or can verify the digital signature.

  There is also no icon in the network for lan wlan connections only. When I use the radar in connectivity doctor tells me that the WiFi network is disabled but I can't understand how to activate it.

  When I start in safe mode and go to Device Manager I see the wireless network adapter, but when I try to install the driver I leave safe mode and restart. I did and then the WiFi network is displayed in the Device Manager but when I try to load the driver, I thought that the driver is updated and then the adapter disappears from the Device Manager.

  I'm so frustrated at this point and I'm very close to a full erase and start over.

  I also tried to reload and load the default configuration settings in the installation program, but didn't make any difference.

  My laptop is a Satellite A500-17 x with windows 7 64 bit.
  The WiFi network is Realtek RTL8192E Wireless Lan 802.11 PCI - ENIC

  Hello

  Go to BIOS (press F2) and set it to default settings.
  Save the changes and restart the device.
  Then try to reinstall the WLan driver again.

  If that does not help, download the most recent and updated BIOS to BIOS first day.
  Then, restart the device and try reinstalling the Wlan driver.

  Last but not least you could test the WLan feature on laptop running with factory settings current (after using the Toshiba Recovery)

  PS: in order to use the WiFi network you must use the FN + F8 key combination and must turn on the WLan (in front of the laptop) switch to position.

• Re: Tecra M11 - 15W - Parallel Port LPT1, not found in Device Manager

  Hello

  I have Tecra M11 with PA3680E-1PRP Docking Station. BIOS Version 2.9.

  Problem is, I want to use the Parallel Port LPT 1, but in anchorage additive dosent device manager there.

  Thanks much for the tips

  Hey Buddy,

  What device is connected to the LPT1 port? Usually if you connect a device to LPT port and you turn on you will be asked for drivers. AFAIK the LPT device drivers must be installed before connect you.

  Several years ago I also used LPT connection for my printer but one day it didn't work. The problem was only a defective cable. I replaced it with a new one, and then the connection to the printer has been recognized again correctly! :)

• Connect a camera, camera not found in Device Manager? -Updated!

  I've had problems with my camera for a few months now. Yesterday, I got fed up and took off all my files and reset the computer. When I open the camera it worked for about a second, then come back onscreen "connect a camera". I use an ASUS Q200E with a built-in webcam. Given that I have restored the laptop, I was using windows 8, and when I tried to install updates before installing 8.1, which took an hour or two, they failed.

  When you go to the ASUS site I can't find a driver of webcam 8 windows (or 8.1). I tried for hours to find a.

  Told me the troubleshooting of hardware and devices that "material changes may not have been detected.

  I followed the steps for the option in the BIOS, but when I got to the stage where I had to find the configuration of the system, it was not there.

  Any help would be greatly appreciated, I'm getting very frustrated with all these questions about a freshly delivered to zero laptop.

  UPDATE: I installed all available updates finally. When I open the camera app, I was able to use the webcam and take a picture of me. However, when I moved my computer on my lap the webcam has stopped working and I had returned to the page "connect a camera".

  Is this a hardware problem?

  Hi EmmaAyubi,

  While the webcam is running for a few seconds, it stops working when the laptop is moved, there is a possible connectivity problem. Please, contact the ASUS technical support and see if they can help you with this.

  http://VIP.ASUS.com/Forum

• Webcam does not appear in Device Manager

  I have a model of portable pavilion G62-233NR windows 7 64-bit, with a built-in webcam.  YouC'm software was bundled with it and worked.  Now the webcam is not found by one of the video programs AE Skype, Youcam... etc...

  I also noticed that the webcam does not appear in Device Manager. I tell me that I have to reinstall a driver for it but do not know what driver to install. HP has the following availble drivers for my model but which?  If one of the pilots was labeled "webcam", the task would be easy. I hope because the driver is missing in Device Manager that has installed a driver will set missing cam... I'm worried because I don't see a driver named "webcam" in the list... but what else could the problem, how can I get the driver installed, if that's the problem.

  Hello world

  I have windows 7, in the balk suggestion you type cmd

  then you have a suggestion, then you must right-click of the mouse and select administrator. otherwise, you will not be of addministrator and you can not make the order.

  Greetz

  Steve

• not found boot device. Please install a drive of system.hard of operation (3FO) past all the hard drive test

  not found boot device. Please install a drive of system.hard of operation (3FO) passed all the test drive I get this message after the recovery disc 1 stops at 36% and tells me to put in disk 2, I just discovered that my grandson was trying to help me by resetting my computer from factory settings off he thinks about 27% complete , it is only 8 and just trying to help this computer is only a few weeks was a Christmas gift its my fault for complaing about windows 8, can someone help me please thanks in advance

  I solved this problem myself thanks all syudents there to post what you've tried I went to bios and disabled the startup enabled legacey mode sucure tried to go to the Boot Manager it was my boot devices tried to use recovery disc recived the same message I have reset to factory settings and was able to reinstall windows normally

• CD/dvd drive is not listed in Device Manager

  my laptop is a hp pavillion entertainment pc dv6605us, running windows vista. the cd/dvd drive is not read / write any CD and it is not listed in Device Manager. I tried to fix this problem by using the microsoft fixit tool, but I'm still having the same problem. I checked the system registry and found no upperfilters and lowerfilters.
  Please, how can I solve this problem?

  Hello

  Step 1: Please do all the same underneath if you did some before as it is often the total process
  which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista
  After starting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows controllers USB 8 not on the Device Manager list

  Bus controllers series not on the Device Manager list. USB ports not working do not. I tried equipment difficulty and said could not find drivers for multifunction device clicked on fix not found the drivers for it. could use a little help with that.

  USB windows 8

  Hello

  Sounds like hardware and you cannot resolve hardware with the software. Check with the system
  Manufacturer of support, their books online, the diagnosis and ask in their forums (if
  There are). Or check with a real computer store (one who does on its own in-store service
  This brand and model of laptop).

  Remember that you can not resolve hardware with the software.

  =====================================================

  Troubleshooting you can try:

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Windows key + X (or right click in the lower left corner) - (Admin) command prompt

  C:\Windows\System32\ >

  At the prompt, type in SFC/scannow above
  (There is a space between C and /)

  How to run the command "SFC/scannow" at startup or in Windows 8
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  -----

  Then run CheckDisk (chkfdsk/f/r)

  File (formerly Windows Explorer)

  Right click on drive C: - Properties - tab tools - error checking - Check

  Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8/8.1
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are identical (and
  Windows 8/8.1)
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ------------------------------------------------------------------------------------------------

  Install USB 3.0 and other USB devices
  http://Windows.Microsoft.com/en-us/Windows-8/install-USB-3-USB-devices

  Hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Set up your PC - configure your devices
  http://Windows.Microsoft.com/en-us/Windows-8/set-up-devices#1TC=T1

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ===================================================

  If necessary:

  Try to do a "Refresh you PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8/8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8/8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Pavilion Notebook 15-p204na: not found boot device

  I get the folowwing message:

  Not found boot device

  Please install an operating system on your hard drive

  hard drive (3F0)

  I did a restore default BIOS, but it did not work.

  @Ram14: see is something in the linked thread help: ' Hard Disk - BootDevice (3F0) not found "error - HP Support Forum's - 2443931

• Satellite C660d-102 Wlan does not appear in Device Manager - which driver?

  My Satellite C660d-102 wlan network adapter does not work it is not displayed in Device Manager...
  Which driver should be used to solve the problem?

  I am using Windows 7 64 bit on it...
  Tried my level best to install the wifi adapter...

  Please help: (...)

  Hello

  Laptop seems to support the Realtek RTL8188CE WLan card.
  You have the Realtek Wlan driver that you can download here.
  http://APS2.toshiba-tro.de/WLAN/

• Tecra 9100: sound card is not listed in Device Manager

  Hello
  I have a toshiba laptop 9100 that does not show me the sound card in Device Manager.

  I recently changed the laptop bobdy and uses a disk hard work that work very well with my old laptop which also has the same model and the sound used to work properly with this one. but since I changed my laptop, the sound just does not.

  I also tried to install all the latest drivers that I am running windows xp sp2, and there are drivers available who have a difficulty for this os. But when I try and install the drivers it always ends with a message warning "drivers are not installed.

  I tried to see if there is another way in which I can configure my sound, but it simply doesn't.

  Help, please!

  thanx

  Peppy

  [Edited by: admin August 6 05 08:52]

  Hello peppy

  If the sound card is not listed in Device Manager, the explanation is very simple. The card its doesn't exist for the operating system. Either card defective or not connected properly.

  Contact the Service partner and let check the device. Sorry, but in this case I put t see another solution.

  BR

• The screen message: not found boot device

  I get the following message on my HP Pavilion dv5-1200: "not found boot device. Please install an operating system on your hard drive. Hard drive (3FO) '. Can anyone advise, please.

  I give it a go without having too much hope that it will work. Once again thanks a lot or your valuable support.
  Rabia