door-cartridges Officejet 6500 a

Similar Questions

• Firefox 3.6.10 allow me to choose a black cartridge only printing one my HP Officejet 6500 (not wireless).

  Selector only black cartridge is not active.

  The problem is your printer:

  Also, I have the OfficeJet 6500 and had the same problem. Black text was printing with a mixture of colored inks rather than black ink, resulting a gray, fuzzy text. I finally found a solution. In each application under Page Setup, there is an option called "Format for". Mine was created for "any printer". I changed that to "Officejet 6500 E709n [830E4A]" and now it prints black very well. I have a Mac running 10.4.11. I hope this helps.

• HP Officejet 6500 a Plus: black ink cartridge does not print

  I have a HP Officejet 6500 a and have an operating system of Windows 10 on a Dell Inspiron 15R.  The printer does not print any black ink. I have genuine HP cartridges and the black cartridge is about 75% full. It was working properly until this morning. I downloaded your troubleshooting and everything seems fine. I ran the program cleaning head several times, but I can't always get black ink on a page. The other colors are fine. After the second head cleaning, I got a very small black image, but head cleaning has resulted in no black ink. I made sure that the wind had been reached on the cartridge and this problem occurs with wireless and hard wired connections. Time before, it happened and when I replaced the cartridge, it worked. After reading some of the messages on the map, it seems not to be the solution. I also hesitate to throw a cartridge that is only 25% used. Can you help me?

  Hello @robertj138,

• OfficeJet 6500 has more - black print cartridge will not print - other colors will be printed

  OfficeJet 6500 has more the black cartridge will not print.  I put in a new cartridge, so it is there

  ink.  The printer works, because the other colors of printing.  It worked very well and when

  printing, black has slowed and now does not work.

  I called technical support.  Megan has been very helpful to me through the steps to

  clean the print head.  Unfortunately, the black cartridge still does not print.  I have

  has ordered a new printer, the 6700.  I appreciate the help of Megan and will be happy to

  have a new printer.

• OfficeJet 6500 new black cartridge installed, but print Brown (all colors) instead

  Hello

  I replaced the black cartridge in my OfficeJet 6500, and clicking on it.  (I triple checked it.)  However, when I try to print a document that is supposed to be any black ink, it prints in a Brown shade as if it is mix inks instead of using black-colored.   I printed a diagnostic page, cleaned and alignment of the heads of print and even restarted the computer and the printer.  Nothing helps!  I am still at work and I have documents that need to be printed!

  Do you have any suggestions?

  Thank you!

  What operating system do you have?  For Windows 7, you would go to start, devices and Printerss, right-click on the Officejet 6500 and then select Printing Preferences.  You can change the setting 'document Type' in the tab 'Features', then click on apply.

  The above will change the default value.  You can also change the print to a particular print job by selecting the print properties when you go to print.

  

• 6500 a Ofdficejet: my HP Officejet 6500 will not print black. The cartridge is full

  My printer prints black; the cartridge is full and recognized.  There seems to be a loose rubber around the print sensor ring

  Hey @PickDan,

  Welcome to the Forums of HP Support!

  I see that you have problems with the printing of the all-in-one printer Officejet 6500 a. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.

  If after the above, that you are unable to print correctly, the printer must be replaced. You can contact the HP Support by clicking this link and filling out the form below to see what options are available.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet 6500 has more cartridge sit properly.

  I just replaced all ink cartridges in my HP officejet 6500 has more.  The yellow cartridge is not slam into the cradle, as others do.  Therefore I get an error message saying that the 'cartridge is missing or damaged."   What should I do?

  My operating system is Windows xp.  We are wired and I don't know if we are 32 or 64 bit.

  Thank you.

  

  Hi I think you are talking about the transparent plastic glass that precedes, it was old design but we have removed the same part of the design, but it should continue to work.

  THS printer type media.

  You have a spare cartridge to try to install and see if it fits.

  If this is not the case please call HP support and they should be able to help furthur.

  Thanks for all your support

• "I have a hp officejet 6500 e709 - black ink does not print." I have replaced the ink cartridge...

  "I have a HP Officejet 6500 E709 - black ink does not print." I have replaced the ink cartridge... clean the print heads and contacts... and nothing seems to work. All other colours print fine. HELP ME PLEASE.

  Before you buy a new set of PHA, you could try following the instructions on this post for a more aggressive cleaning Interior http://h30434.www3.hp.com/t5/Other-Printing-Questions/Photosmart-Premium-c309a-Black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  Try this first and post back to tell how you got.

• HP OfficeJet 6500: Is the color cartridge to print in black?

  Hello

  I had a brother printer which required that there is ink in the color cartridges even if I only wanted to print in black.  Is the HP Officejet 6500 in the same way?  Is it necessary that it be ink cartridges color, even though I'm only printing in black ink only?

  Thank you

  Westin wrote:

  Is it necessary that it be ink cartridges color, even though I'm only printing in black ink only?

  Yes, he does. And it is only to prevent the nozzles of ink on the printheads of evaporation, resulting in poor print quality when you decide to print in color.

• OfficeJet 6500-E7709n - cartridge to reactivate 'chip' level of oversight

  OK, slap my wrist, I was a bad boy...

  I tried to refill the cartridges run out on my OfficeJet 6500 - and no end of trouble.  Yes I know.  Smart move Einstein!  One of the recommendations is to disable monitoring via the menu Preferences (#7) in the configuration of the chip ink level.

  I'm sure you can guess, that did not do diddle squat, so now I want to go out & get some genuine HP cartridges.  Before I install them, I want to cancel the mess I made and put things back as they were.

  Question: How can I enable this option on YOU?  After turning it off, option has completely disappeared in the Preferences menu.

  I tried a "Reset Defaults", but it does not work.  Is there a way to reactivate?  That, in the absence, is there a way, nuke (so to speak), the printer around the age of stone for what is it to its Out-Of-Box State?

  Thank you!

  Jim (J.R.)

  Update:

  I figured out !

  To do this, you must do a Reset of the NVRAM by performing the sequence of steps following:

  1. Turn the printer off using the power button on the front panel
  2. Using two fingers on one hand, press and hold the keys "6" and the "#" at the same time.
  3. With your other hand, press the power button to re - turn on the printer.
  4. Keep pushing on the # and 6 keys until the screen turns off and then turns on again to the top.  Then he will say "Semi NVRAM Reset" - at this time there, you can release the # and 6 keys.  This may take a minute or two.

  Once this is done, the printer will go through his routine of initial running "out-of-box" for printing.  In other words, it will attempt to reload the print heads by making several cleaning cycles and will work then a cycle of alignment.

  When you do that, you're done.

  I hope this helps.

  Jim (J.R.)

• HP Officejet 6500 E709n ink printing - black not printing

  I have a printer HP Officejet 6500 E709n and for some reason the black ink is not printing.  Color cartridges work fine.  I have even changed the black, cleaned cartridge and print head alignment, uninstalled and reinstalled the printer, but nothing solved the problem.  I was wondering if the color management profile has something to do with it.  Help, please!

  Thank you!

  mickicarter wrote:
  

  Tell me how to solve this problem.

  See the post here.

• OfficeJet 6500 will not print black

  Hello

  I have an Officejet 6500 AIO which allows to print any color over black. We have already replaced the black toner cartridge, ran an alignment (which failed), and 1st and 2nd printhead level cleaning, with no improvement made. I searched online HP even sells no more replacement for this model print heads, and those that I could find other suppliers cost half the price of a new printer.

  Anything else I can try before calling, she leaves and replace the whole unit?

  Thank you

  Dave

  If the suggestion of Print_Hint does not resolve the problem, you can try to soak the print head in warm water for a few minutes as described in this post.

• How to configure my Mac (OSX Lion) to receive faxes directly from my HP Officejet 6500 +.

  I have a Mac OS x Lion and a HP Officejet 6500 +. I would like to save incoming faxes directly to my computer, rather than having the 6500 to print them. I installed the driver of HP6500 on Mac: print and outgoing fax jobs. Using the configuration Print & Scan on Mac System Preferences, I can select the Officejet 6500 fax, click on "receive options" and turn on "receive faxes on this computer": I got him to answer after 1 ring and save faxes to an appropriate folder.

  The problem is that the incoming faxes even print directly on the 6500 and are not registered on the computer.

  I tried following the instructions on the manual for 6500 located here: http://h10032.www1.hp.com/ctg/Manual/c02519721.pdf but the indications on page 57 for the implementation using the HP tell me to select the "applications" icon in the toolbar and it isn't here.

  Any help would be appreciated, thanks.

  Well, this got me half way there, thank you.

  Once you have installed the software which recommends ShlomiL, then you must enable the option Archive digital as described, which won't be available unless the device is physically connected via a USB cable. Wireless is not an option. The value "Digital Fax archiving" 'Save to Folder' and then choose a folder that is accessible in writing-world. The folder must be specific for incoming and used faxes for anything else! The 'Notification of incoming Fax' value to what you want.

  Then go into the front panel of the 6500 and disable printing fax. (There is an option buried under "base set up the fax / Fax HP Digital")

  Finally, create an automator workflow that automatically prints any picture of new place in the folder of incoming faxes created there are two steps. Set it to print on a printer laserjet cheap rather than ink-jet 6500 ridiculously expensive. (Or skip this step if you're ok with not having a copy of incoming faxes).

  You can ignore the options useful and well-designed integrated on your Apple about "receive faxes on this computer". HP only plays nice with that.

  I still hate the HP, but at least now I didn't spend $35 for a new inkjet cartridge every two weeks.

• OfficeJet 6500 E709n series: analyse problems in the center of HP solutions and external application (Twain) since winning 10 year anniversary

  I use my all-in-one printer in a network.

  Scan with "ScanToPDF" wich is a solution of Twain.

  Since the aniversy win 10 updated

  -cannot use more ScanToPDF

  -scan with scanner HP Solution gives the same error:
  (Dutch)  Scan kan niet worden uitgevoerd omdat het HP-beeldbewerkingsappraat zich in een network is en wordt door een ander used programma of een andere computer. Try het later opnieuw.

  (translated) Cannot scan as scanner HP of network and is used another computer bij.

  Try again later. 8, [(0.18,-2147467259)]

  tried to fix it by manually forcing Windows updated my drivers (officejet 6500 E709n series). The driver was updated, but no result.

  Scanning with Windows fax and scan (do not use Twain AFAIK) works fine, but produces no PDF.

  Help!

  Hello @Jörg63, hope you are well!

  Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice.

  I understand that you are having problems after update to Win 10 of scanning to PDF. I would like to help.

  I'm afraid that HP Solution center may not work in the Windows 10 environment due to some compatibility problems.

  I suggest that you use HP Scan and capture request instead. Capture and scanning HP is a simple application that captures photos or documents to your computer's built-in camera or scanning HP device.  These images can be previewed, edited, saved, and shared to other applications as well.

  Go to http://hp.care/2bUVkrw to download and install the windows scanning and Capture app.

  Please let me know if that solves the problem, or if you need assistance

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Does everything except officejet 6500 still won't print black not - help!

  Hello

  HP Officejet 6500 E709a, purchased in June 2011, stopped printing in black ink one day last week.  Quickly, I ordered new ink and replace the cartridge.  When he wouldn't even print I started troubleshooting and followed all the steps.  After cleaning the print head, a few letters of a printed page, but no more than that.  This gave me hope so I ordered a new print head, which was installed today.  No improvement, so I replaced the color ink cartridges and reinstalled the black cartridge, which all appear to be properly ventilated.  Still no improvement. only a few shadows black letters.  It is by generating messages "alignment" or "ink system failure".  So now, I replaced all the ink cartridges and the print head.  It prints color but not black.

  Really, I love this printer and have had no problems in the past.  It's only a little over a year and I do not use it too.  I didn't do a new printer and now that I have invested $100 in ink and Geraldine Chief I would like it to work.  Help would be greatly appreciated!

  Thank you

  Marene

  Hi John, I was afraid of that... but thank you for your time and your advice. Marene