Dosen mouse not respons on Satellite Pro M75

Similar Questions

• CD/DVD-RW Drive does not write on Satellite Pro M75

  Hello

  Im having problems burning CD and DVD on the drive. I have some media in itunes (which i baught! also I have made a backup of the original!) and I want to put on a disc, so I make a new playlist as usual, then I put the disc in and then click on "Burn to CD" so I do... it burns a song, but she then said that there is an error. Also when I try to burn a video I have made through DIVx and happens to 1% and an error occurs. screwing of the disks.

  Also when I try and format the DVD - RW with Sonic DLA thing - it gets to 5% and then it says: 'cannot continue because of the General faliour' which is also very annoying also.

  What should I do? What is the hardware or software.

  Thank you

  Joly

  Hello

  is this error happening since you have this computer or from a specific point. Would be interesting when the problem started, maybe some software is defective drive and causes this error you have.

  Please give some detailed comments and describe what you were doing in recent times with the machine and the fact that you have installed a software or something else.

  Would appreciate some comments.

  Welcome them

• Satellite Pro M75 with Vista: Mat * a UJ - 841 S cannot save

  Hello world. I installed windows vista on my Satellite Pro M75 and everything seems to work fine except the DVD player. It reads CDs and DVDs fine, but when I try to record a DVD it gives me an error message that the media is not empty or a general error message that it can't sign up.

  I have tried many programs, Nero 7, Sonic, Slysoft, even the windows bult in the program but nothing works. I also tried various DVD-R and DVD + R but no luck. Someone knows something?

  Thank you.

  Hi Mike

  It sounds a bit to the lens of the player is not able to recognize and write to the media.
  But let's try some common procedures

  Please check if the Sonic and DLA has been installed on the laptop. If so, remove it and only burning apps like Nero.

  Also, try to remove the upper and lower registry filter:
  -Start the registry editor

  -Did the UpperFilters value under the following key in the registry:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -On the Edit menu, click on remove and then click OK

  -Did the LowerFilters value under the same registry key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -On the Edit menu, click on remove and then click OK

  -After you have deleted the restart your computer

  Good luck buddy

• Function keys do not work on satellite Pro R50 - B

  Hello

  I've owned only my laptop a few months now and have not been able to find why my "key service" do not work

  If anyone has had this problem and how can I fixed that

  Thank you

  Dave

  Posted by david radish
  

  Hello

  I've owned only my laptop a few months now and have not been able to find why my "key service" do not work

  If anyone has had this problem and how can I fixed that

  Thank you

  Dave

  I have a satellite Pro R50 - B preloaded with Win 7 Pro.
  On the bottom row of the keyboard the second key to the left is a FN key.
  Press and hold the FN button active the function keys on the top row.
  I think that's how its supposed to work.
  If you cannot use the function keys, it could be linked to the FN key.
  Regs
  Nev

• Signal not detected on Satellite Pro 6100 wireless

  I have two laptops Satellite Pro 6100, two of them are configured to automatically connect to our local wireless router which they both started.
  A computer is used by myself by my wife; bookmarks, email accounts and so on are different on every computer/hard drive.

  I have problems with one of the computers (mine) - the usual problem with multispindle connectors on the video boards and feeding, then I tried to use "his" computer with 'ma' machine's hard drive.

  His machine does not recognize our LAN with my hard drive installed. He came up with a new network found, but not a wireless network. Also, with this machine and my hard drive installed, can't the machine to search for wireless LANs, the icon does not appear. The switch is turned on for wireless signals and it works very well with his hard drive in it. The network is protected, and the two machines have the same id in them for connection which work fine in the original engine.

  I don't really understand this condition. Something in the bios? Something on my hard drive that is not recognized by the computer? the wrong phase of the Moon?
  Suggestions how to trouble shoot and fix this?

  Both machines are XP Pro on them, latest updates.

  Hello

  Also AFAIK, Satellite Pro 6100 was equipped with different Wlan cards so if use different HDD with different driver then the Wlan card could not be detected by Windows XP.

  Check if the wireless adapter is listed in the Device Manager and recognized correctly.

• Upgrade can not display drivers - Satellite Pro U200-10J

  Hi all

  I recently received a Satellite Pro U200, which I am very satisfied so far.

  My current display drivers are the 7.14.10.1147 of the 945GM Express chipset Intel. The new drivers that have been added to the drivers on the Toshiba site list 17 and are the 7.14.10.1227. Unfortunately, they install! I get a message just after the initialization of configuration that these drivers are not the most appropriate for this laptop and it closed facility. When I try to update the Device Manager, it simply tells me that I already have the latest drivers for my machine.

  Please notify; p

  Hello

  Before you start installing the new driver remove the old. You can do this in the properties of the device in Device Manager.

  I did it with my Vista preinstalled Satellite A200 (also with the Intel graphics card).

• Windows 8 to 8.1 upgrade is not possible on Satellite Pro C850-1MX

  Hello Forum users,.

  Sorry for my bad English. I'll try my best ;-)

  I'm trying to upgrade Windows 8.0 8.1 on a Satellite Pro C850-1MX.

  Before that I removed:
  -Realtek Audio Driver
  -Realtek WLAN Driver
  -Bluetooth filter Driverpackage
  -Toshiba Health Monitor

  I also checked the notebook with the update of the Windows Advisor 8 / attend.

  Whenever I try the update is installed, the computer restarts and says while the previous version is restored because the update failed (0xC1900101 & 0 x 30018).

  I tried to restore the laptop to factory (using the recovery partition), deleted the drivers, tried again. Same failure.

  Where is the problem?
  Someone at - it an idea?
  I Don t know what to do then.

  Thank you!!

  Thiemo

  Hello

  Upgrade the win 8 to 8.1 win, to follow some step by step instructions:
  This can be found here: [how update of Windows 8 for Windows 8.1 | http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/]

  Note: after installing Windows 8.1 drivers Toshiba and tools needs to be updated in the correct order.
  The Win 8.1 driver installation instruction can be found on the page of the Toshiba UE driver you laptop model section.

• Not detected in satellite pro 6000 integrated wireless card

  Hello

  my company has two satellite pro 6000 with wifi built-in.
  I'm sure that when we have received laptops led wifi turn properly when the wifi switch is activated.
  Since we had no wifi, never bothered us check.
  Now, it seems that the card is not detected, it does not appear in Device Manager.
  Runing xp SP2.

  Fred

  Hi Fred

  Y at - it the same problem with two laptops?

  Have you tried to start the Hardware Wizard? If the card is there it will be shown, and if the card will not be detected that it is possible that this card has been removed.

  Check it out.

• Cooling fan does not work on Satellite Pro A300

  Hello world

  I was asked by a friend to repair their Satellite Pro A300, because their CPU cooling fan had stopped working even during the start of the POST and the laptop could overheat and shutdown. So I thought it might one of three things:
  # Fan is obstructed by dust or dirt
  # Rolling fan failed
  # Fan power cable was loose

  So I disassembled the laptop and cleaned the fan/radiator with compressed air and check the connection of the supply, which was solid, but this does not solve the problem, so I replaced the fan and the heatsink with another that I knew worked from the same model laptop that had a motherboard fault due to the bug of password to start random bios (out of warranty) but still no joy.

  I'm starting to believe that the fan was perfectly fine rather motherboards temperature of the processor or the sensors that control the activation of the fan has failed.
  Am I correct in thinking that it is essentially, irreparable without specialized tools and my friend will be content themselves to turn the system off each hourish or is there something else I forget?

  Thanks for any help.

  Hello

  I m not a technician, but for me, looks like the fan connector is working properly if you already replaced the fan and therefore, it would be necessary to replace the motherboard

  That s all I can say about it having a look for second mainboard or laptop where you can get a motherboard cheap. Maybe it works. :)

• Ulead DVD Movie Writer was not preinstalled on Satellite Pro A200 (PSAE7E)

  Ulead DVD MovieWriter for TOSHIBA was not preinstalled in my Toshiba Satellite Pro A200 (PSAE7E) as it was stated in the technical data.
  Where can I get (download) a copy of this program.

  You are right, I found a few pages on the Satellite Pro A200 model nr. : PSAE7E and Ulead DVD MovieWriter for TOSHIBA must be preinstalled.

  Did you check all folders on the HARD drive for this application?
  Have you tried to reinstall the OS from the recovery CD Toshiba delivered?

  Please do because the restore CD contains the Win OS, drivers and additional software like Ulead DVD MovieWriter.

  Concerning

• Bluetooth is not recognized on Satellite Pro A100

  I have a Satellite Pro A100 828 running Win XP Pro.

  He is supposed to have integrated bluetooth but when I install the bluetooth stack, a message appears saying peripheral usb has malfunctioned and is not recognized by windows.

  In Device Manager, it is listed as an unknown device.
  I tried different versions of the bluetooth stack, but the same message still appears.

  Is there a software fix for this or does this mean that my hardware is defective? Would be grateful for any advice.

  Thank you.

  Hello

  where downloaded battery Bluetooth? And another question: do you have bluetooth never work properly? It would be interesting.
  Try another might be to download a Linux Live-CD and to check if the problem is perhaps more a hardware related issue.

  So, if you need an alternative download source then try this address:

  http://209.167.114.38/support/download/ln_byModel.asp

  Greetings

• USB devices not seen on Satellite Pro A60

  Hello

  I'm having a problem with my laptop Satellite Pro A60 running Windows XP Home: it is simply not to see all devices at all. Devices (USB, fan keys) are to be supplied with electricity, but I can find no trace of them on the computer anywhere. It is even not complain that they are not recognized - it's as if they were not there. I've uninstalled and reinstalled the drivers of hub USB root/controllers, but that has not helped.

  It is the latest in a string a glitches that can be helpful to know: a few weeks ago, the ATI Mobility Radeon 7000 IGP suddenly caused windows crash at boot time. I could just sort the problem by updating the bios and reinstall the ATI drivers (all toshiba). It is not of course the relevance, but after the bios update I also improved the 6 F-secure antivirus software. XX to 7.01.

  Usually, I try to get as much as I can by reading these forums but I'm not a guru of computing and on this one, I'm out of ideas - because Windows is not identify any fault, I don't even know what to look for on google... Someone has an idea?

  Thank you very much

  Philippe

  Hmm, you said that you have already reinstalled the drivers of USB controllers/root hub.

  But maybe you should try to make this again as a result of this procedure;
  -Disconnect all USB devices
  -go to the Device Manager and change the view to display hidden devices.
  -Open the tree of the USB controller and remove all controllers.
  -Restart the computer and wait until the OS has installed everything again.
  -Then plug the USB devices to the USB ports for laptop

  If this does not help, it would be desirable to recover the laptop with the Toshiba Recovery CD supplied.

  Good luck

• Can not start my Satellite Pro A10

  I have a Toshiba laptop Satellite Pro A10. When he tries to start windows, it comes up with the "We apologize for the inconvenience, but windows did not start successfully" etc. I tried all the options for example

  Start:
  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last known good configuration
  etc.

  None of the options works. All I get is a flow of information about drivers and it then hangs. The last driver in the list is:

  multi (0) disk (0) partition (1) \WINDOWS\System32\Drive rs\Mup.sys

  I can't clear the checkpoint.

  Unfortunately, I can't find the disc that came with the laptop, so I'm well and truly stuck.

  Any suggestions?

  See you soon

  HI Leon,

  It is quite normal that there is a list of drivers displayed when you try to boot into 'safe' mode However, if initialization fails, obviously there is a problem with your operating system and your only options are to try to fix the problem by using the recovery console (you will need to boot from a CD of original Microsoft installation), or you can restore the original Toshiba CD recovery full operating system.
  A third possibility would be to start with a utility such as Norton Ghost or Acronis image backup/restore and restore a backup previously taken by an external device.

  The simplest option is to restore from a backup that is already taken, but if you don't then you would be better restore from the recovery CD Toshiba you can get at any Toshiba authorized Service partner.

  Kind regards

• After replacemant keyboard keys do not work on Satellite Pro L100

  Hello

  I have problems replacing my laptop to a Toshiba Satellite Pro L100 keyboard. I adapted my laptop with a keyboard replacement brand new, it is detected by windows. But when I press any button, nothing happens.

  It was the same problem with my previous keyboard. There is nothing broken inside the laptop or the clip that I can tell. But I can't understand why it does not work since I installed the keyboard properly.

  My computer detects only external keyboards (when I connect it to a USB keyboard). I checked the BIOS and the keyboard is turned on.

  Did someone knows what I could or should do? Please help me, thank you.

  Hello

  Sorry, he says, but it's not easy to say why the keyboard does not especially the dysfunction of the keyboard is related to the hardware problem laptop

  But I wonder why you did not contact the maintainer authorized Toshiba?
  To my knowledge, the satellite Pro L100 is not an oldie and security must be still valid and each replacement repair or part of the laptop should be done for free.
  Then why have you tried to replace the keyboard by yourself?

  I recommend to ask the guy to service to help immediately

• Function keys do not work on Satellite Pro 6100

  Hello

  I have a Toshiba Satellite Pro 6100 running on Windows XP SP2.
  I had a slight problem with the shortcut keyboard/function keys. When I press the FN + F5 (display output) nothing happens.
  [edit]
  I fixed the wireless FN + F8 combination now. The FN + F5 again will not work. I installed the common modules and wireless hotkey utility
  [/ Edit]
  I installed the shortened program from Toshiba, but that won't help.

  Anyone have a tip or something?

  Greetings

  Post edited by: boinkie

  Hello

  Please install Toshiba Hotkey for 1.00.01.00 - 02 worm. display devices and test the combination of keys FN + F5 again.