dotted frame

Similar Questions

• Troubleshooting the lack of table of contents level

  I'm under InDesign CS6. For some reason any my level 1 paragraph styles are not appearing in the table of contents (which looks pretty otherwise). I use Master Pages... one is the first Page of chapter. He uses the paragraph style "chapter titled new L1. I synced the book. I made sure whenever I use this Master Page that point to the same paragraph style. Each chapter is a new document. What Miss me?

  Here is the master page

  

  Here it is in use

  

  Here is how to generate the table of contents.

  

  Of course, you must override on the page of the document (and not the master page) in order for InDesign to 'see' the content in the frame as belonging to this page (and so put it in the table of contents). For example, if your position is on page 5, you must override the image on page 5 with command + shift (Mac) or Ctrl + Shift (Windows) and clicking on the image. The dotted frame will change to a solid frame on this page. Then go to your table of contents page, select the image containing the table of contents and in the menu layout and choose Update Table of contents. You need to replace the image on each page of the document where it contains the content that you want to appear in the table of contents.

• Dot net Frame work 2.0 SP2 and 3.5 Sp1 failed with error 0 x 80070643

  Can you please help me out with the solution for Dot net Frame work 2.0 SP2 and 3.5 Sp1 failures that occur frequently.

  We tried with the dotnet uninstall and update with the last, but still the questions are on the same machine when we have updated with the latest patches released from Microsoft.we use WSUS 3.0 to update patches from microsoft in desktop computers

  Error code : Installation failure: Windows failed to install the following update with error 0 x 80070643:

  Please help with a permanent solution.

  http://support.Microsoft.com/kb/976982

• Time-remapping creates white dots a frame before a transition.

  Hello.
  I made an animation with 2 scenes. I created a new composition with my finished animation where I activated the time remapping. In the last frame before the passage of the scene a scene two a lot of white dots appear on the screen. These points do not appear in the publication without the time remapping effect. I'll upload my AE file, so you can have a look.

  http://www.mediafire.com/download/nkdxqk5g9r7daq7/polygon.AEP
  Thanks in advance for the help.

  Ah... the look has the-Hollywood-fade. You can never forget the Immaculate appearance of this wonderful blend mode. Here's your culprit:

  

• Dotted line around the picture frame in the mode of statement of assets.

  In my state the active, I have the button set to open in a new window once above, on which it does. But when I go back to the page, there is a dotted line around the picture frame that doesn't go away. Any help would be greatly appreciated!

  

  Hello

  I believe that you use Firefox to view the site, as this happens only on firefox.

  This is a known problem on their end the selection to the item page remains when we go back to the page.

  Details can be found on this link:

  https://developer.Mozilla.org/en-us/docs/tools/Page_Inspector

  where it is mentioned that they would be taking off this Firefox 29 go.

  Muse we cannot control this, because it is a specific selection of the browser function.

  Thank you

  Sanjit

• How can I get rid of the dotted line on the right side of the frame enclosing

  Since I upgraded to CS5, I seem to have a broken dotted line along the right side of the frame enclosing the png logo that was created for my business.  It did not exist previously. I went back to my original back to the logo and it broke the line is in all versions now.

  When I use the work a single table of edge/dotted line is left to the far right, where it would have been the right vertical line of the bounding box. You can see in the image below on the right.  Its a slight white line but when printed on a banner for its stark white.  The line falls just above the last "A" in Alberta.

  

  I use Illustrator and Photoshop basics and but have trouble when I'm in the problems of this kind.

  Can someone help me understand why its there and how get rid of?

  I'd appreciate any help!

  
  Thank you.

  Probably not without more information.

  The logo is placed above the background color or is the part of the logo background color.

  Are they on the same layer is the effect applied to the logo. Say you that it is png, which program was author in and why is png?

  Tell us more.

• Can someone tell me why I have the blue dotted lines around some of my objects placed in a former InDesign file? The dashed lines are similar frontiers on the picture frames, but they do not print. They are just annoying. I thought that they might be link

  

  Or it can be a visible type of hyperlink hurried style.

• Black frame break in first / Inverted & Shifted frame SpeedGrade

  PROGRAM:

  First Pro CC (2015.3)

  Last updated: September 27, 2016

  INSTALLATION PROGRAM:

  Chronology of 1080 / RED EPIC images. R3D files.

  QUESTION:

  Black frame break in first / Inverted & Shifted frame SpeedGrade

  I have encountered this problem after changing the settings of the source (shifted the balance of whites around all clips in the timeline). While color correction through direct link to SpeedGrade. The video would play very well, but when I stopped the video that the chassis of the break would be inverted colors, shifted to off on the side. I turned back on then to first and these same clips would be just black when paused. The thing is that I changed the parameters of the source on all clips, but only some are struggling.

  SOLUTION ATTEMPTS:

  I tried to reset all the settings of source for each clip back to "as shot", but the problems remain.
  
  The only work around I could find, (after trying everything!) was a right click on the clip, by selecting "Render and replace...". "This seemed to be the solution until I exported the sequence and the project fails each time once he hit these clips of issue.

  Help, please!
  Leo

  That's what I called at the beginning of this.

  Adobe PrPro CC 2015.0/1/2 were versions of project PrPro 9.x file.

  However, rather than release the next major release as CC 2016, they did something that broke so MANY of their users and has not yet said what it was they were doing. It is... irritating?

  2015.3 and now 2015.4 are project files built on version 10.x of the software... a major version upgrade! ... and not only a minor or 'dot' upgraded because they seem to be.

  They has not not wanted to bring SpeedGrade long... and without announcement, out 2015.3 with no command 'Send to SpeedGrade' Direct Link or process. When people immediately started screaming on this subject, they finally announced they don't think their number, many people used SpeedGrade and seems not worth it to upgrade to the new version...

  And... we are all invited to back to back like Olde to ranking through export EDL SpeedGrade and two folders of the media on this EDL in Sg, or export a flattened the chronology of project to go to Speedgrade too... then of course, export of another SpeedGrade file and replace the track flattened on the timeline with the media graduated.

  Or export a XML file from PrPro and taking to say the determination, along with... still... two media files or file flattened chronology. Do a power of attorney to the export process again (not the clever internal proxy thing) could also help, by using a flat file support to proxy, then re - link that to the original in PrPro media to complete the round trip.

  That all sounds easy enough, right? ....

  Of course, the other option is to simply use the new workspace of color, with the Group of workspace Lumetri clever UI. Which is really very good and very capable, especially if you are using a control box remote as the tangent of ripple or small Palette blocks. Or... a tangent Panel Elements, really nice but rather in the cost. It is quite achievable through the mouse, but a lot spiffier... more intuitive and able to work more fine, with a control surface.

  Now he's advantages and disadvantages. For works of single clip or a few clips that need really not correspondence of accurate shooting, it is very easy, convenient & fast enough. If you really tight & decently fast shot correspondence between a couple hundred shots, or several secondary, uh... it's... possible... but rather slow, shall we say, than SpeedGrade. In addition to not having a button/process corresponding to the shooting as SpeedGrade, you don't have a real 2-top monitor situation either. You can make sort of a up-2 workspace by using a new job - the separate Panel and plopping monitors reference and reading about it, using the chronology of reading in the reference monitor to define who discovers and main sequence to set the monitor of the program to the item you try to classify and to match that in the reference monitor... or... not.

  For MANY more small, simple projects, the Lumetri Panel is very very good. In pretty rough tests today, I would say the secondary Panel in the Panel of PrPro Lumetri is actually better to pull a tight key than SpeedGrade 2015.1, the latest release of SpeedGrade. Not a lot, but... a little better.

  And you can "stack" Lumetri as of the 'effects' on a clip, to get more secondary or make different parts of the process in different stages... However, the full workspace not Lumetri works with the latest projection (bottom) Lumetri in the effect controls panel, so for instances "earlier" on a clip, you go in the PCE, spin to the bottom of Lumetri effects and use these settings. And... your surface outdoor spiffy won't work with everything, but the last of them either. Huh.

  To move, you can use adjustment layers stacked above the clip, simply go to the color workspace, use the controls there and always Lumetri not use your surface. And Lumetri Panel with your mouse or pentab.

  Order of procession always things, so don't forget... in the effect controls panel, things are top of the process down. Among the witnesses of Lumetri, which also means descendant. Treatment of tips in the Basic tab, then stuff in the Design tab and down.

  Now... also as mentioned in a previous post... There is a nice 3rd party tool/applet a user of SpeedGrade Austrian colleague, Patrick something or other, for about 9 Euro... open, navigate to a project file PrPro, as records and converts the file into changing a (one) character... you use this file in 2015.1 SpeedGrade who thinks it's a file link Direct 2015.2 and therefore correct... and after completing , the application may then re - convert the file 'up' by changing this 1 a character return if 2015.4 sees it as its own file again once and not an earlier version which has need to upgrade.

  Fast... easy.... and seems to work well, with a caveat... AfterEffects "comps" do not always, so if you have those who, rather than to make a model of dynamic links in PrPro, make a direct export of the AE and use the clip exported on the timeline in Prpro.

  I haven't handled files r3d via this of course, but... others have probably, like hundreds of downloads of that file would probably include some red media users. Then I guess it would work, and you are welcome to try a trial download and see if it works for you. I just worked on a project today using this process, btw.

  It is mentioned in this link... and there is a LOT of information about this and other things of the recent changes in the nets of ten or higher in this forum.

  Project of creation/Speedgrade conversion tool

  Neil

• File WMV loss of frames

  I loaded the WMV files that work fine in Windows Movie Maker. But the same files in 14 first are frequently gel on a frame and throw many following executives. The audio is fine and in sync with the images that are displayed. These are currently the only files in my project and thus the first loaded files. I am new to Adobe Premier so I guess I did something wrong. But what? This seems so basic.

  The f

  Thanks for the very useful troubleshooting information.

  In reading properties, a property flares, in other words, the video "mode = variable frame rate". Premiere Elements (many versions) does not fare well with video recorded with a variable frequency. The typical remedy is to file in the free program of brake in hand to get the H.264.mp4 with the version of constant frame rate, and then import them into Premiere Elements with Premiere Elements project ' add media/files and folders.

  In the video tab of the hand brake section, remember to set the frame rate to a value of 30, and dot the constant.

  If you need how with Handbrake for this purpose, please do not hesitate to let me know and I'll post screenshots if necessary. It's fast, easy and effective.

  https://handbrake.fr/

  Please update me on your progress as your schedule allows. For any question or need for clarification on this, feel free to ask.

  Thank you.

  RTA

  Add on... I need to get more information on my side video wmv3 codec... the handbrake conversion to take care of video compression, but also the issue of variable frame rate... allow us to see how that turns out I think that the differences between the video codec, wmv, wmv1, and al.

• bleeding and square frames

  Hello!  I hope that I can write my question clearly: my printer requires an inch 20 x 10.16 dotted with pouce.12 bleeding.  OK, got that.  I understand that bleeding is and what happens to the printer.  When I paint a box frame for a photo album on the page, I place it at the edge of the page and then make you the file of the image itself runs the purge, or should I put the box frame at the edge of the purge?  Let's say I want a series of photos of squares all the way through a spread to the edges of the page.  If I place the boxes in the frame all the way to the purge, do not appear images from both ends as rectangles in the final book?  Thanks for the tips!

  Jill

  In the case of the images square across the page, you must make the required number of square frames go just at the edge of the page, then expand the edges of the image (and the images in them) that touch the edge of the page in the purge.

• My dotted line is rendered with an outline of the box. How can I fix?

  Hello

  I am creating a dotted with the widget of simple line line - but a box really made its appearance in the last page (and more), as below:

  

  How can I adjust it only the dotted line appears? I don't see any option for this.

  Thank you very much
  Jeremy

  Check that the widget itself has not had a stroke applied.

  I also recommend that take you a look at my latest gadget that gives you total control over the borders of the frame.

  Better the frame borders Widget for Adobe Muse | Creative muse

  David

• Circular frame

  I work in a project of 1920 x 1080 in first 10 elements. Curious to know if there is a way to cut a circle for a clip plays in a circular frame. (with a black screen outside the circle)  Of course it would save a part of the image which I am fine with to try this idea.

  adobenewbie123

  How are you doing with your second look at the creation of your circle in the titration of 10 items first?

  Right now, you should have the circle created with space inside the circle for your movie.

  Now, the rest of the story.

  Title of your circle on the video Track 2

  Your video on the video 1 track

  But, no matter what you do, you will see the photograph of landscape, beyond the circle. Then...

  Go to change the header video/effects/keying effects and choose one of the caches to hang out in

  the video on the video 1 track. (Maybe start with the cover sixteen points.

  Principle of mast garbage... Everything in the cache points is visible, nothing outside of the transparent cache is not.

  Highlight / video selection on the video 1 track and take the Garbage Matte points and use them to set the video as a circle.

  

  Tips...

  To see these dots on the screen to settle in place, in the video properties, have 16 points

  Garbage Matte Panel selected (highlighted black see Panel).

  To make sure that you have chosen track (video on the video track 1), right click on the screen, select Select, and

  Make sure that you have selected the name of the video on the video 1 track.

  RTA

• Is it possible to export frames using ExtendScript yet?

  Hello. I need to do the same thing that frame 'export' of the button but via JavaScript (export just current image of the sequence as .tiff). I have not found any method of DOM for this. Is this possible?

  No. *

  * There is not a single call. You must create an output preset (file .epr) which makes the current sequence in a fixed format and set the working area of the sequence to include only the image you want. Once you have that, you can use app.encoder.encodeSequence () to generate your image.

  Feel free to write me directly with issues: b b b at adobe dot com.

• Buttons/code works do not systematically across frames/editing questions

  Hi all

  
  

  Total newbie here. I'm trying to produce something that really should be super simple but I must be missing some basics.

  
  

  I use Flash Professional CC, a html5 canvas, Mac OS 10.8.5

  
  

  I created 6 slides, I want users to be able to navigate. Home slide seems superior work. I created 5 buttons that go to the appropriate slide and stop using this code:

  
  

  
  

  this.gotoschool.addEventListener ("click", fl_ClickToGoToAndStopAtFrame_11.bind (this));

  
  

  function fl_ClickToGoToAndStopAtFrame_11()

  {

  this.gotoAndStop (2);

  }

  
  

  
  

  I created a back button, which gives it its own unique instance (back1) to the second slide (frame 1 - for some reason any code reading frame 1 0, frame 2 frame 1, etc) that sends users to the first slide using this code snippet:

  
  

  
  

  This.back1.addEventListener ("click", fl_ClickToGoToAndStopAtFrame_0.bind (this));

  
  

  function fl_ClickToGoToAndStopAtFrame_0()

  {

  this.gotoAndStop (0);

  }

  
  

  
  

  Then, I create another button on frame 3, (back.2) and added the same code snippet:

  
  

  
  

  This.back2.addEventListener ("click", fl_ClickToGoToAndStopAtFrame_0.bind (this));

  
  

  function fl_ClickToGoToAndStopAtFrame_0()

  {

  this.gotoAndStop (0);

  }

  
  

  
  

  However, when I saw or that you post, it is not even save it as a button, let alone date back to the first slide. I don't get the "pointy finger" cursor, it looks like a blank slide with no interactivity. No idea what I'm missing here? I tried to create a button and giving different instances on each image and using the same code snippet, but that don't seem to work either.

  
  

  
  

  
  

  Here's a screenshot of my calendar and the scene:

  
  

  

  
  

  Help, please!

  
  

  Oh, and while I have you here, I noticed also that some items moved during publication and I have no idea why or how avoid this. It's particularly frustrating because I spent much time aligning text and images when they come out unparalleled and it seems really unprofessional.

  
  

  Here is a screenshot, you'll see in the lower left corner, three text lines have changed and are not ' aligned with the corresponding colored dots. Compare that to the screenshot above scene. Also, you will see in the bottom right I had a yellow arrow next to the text 'back' (which I recently replaced it with a "<" symbol) which also misaligned when published.

  
  

  Any help is appreciated.

  
  

  Thank you! -Patrick

  

  Figured it out!

  I had ignored this warning in the output window:

  "Happy with the two Bitmaps and buttons can generate errors of local security in some browsers to run from the local file system."

  It turns out that this image in the left column, the WellSAT oragne button is a bitmap. Apparently, evenunrelated buttons do not work if there is somewhere a bitmap image in the same frame. I replaced the logo with the text and the buttons worked.

  I'm glad it works now, but it's quite frustrating to think I can't have both a bitmap image or a button on the same page. If anyone has any idea why this is the case and a solution, I would like to hear about it.

  Thank you

  Patrick

• Lack of blue frame, which shows around field when editing.

  Often, when the fields are close together, the blue frame that displays the field goes through selection nearby fields. I have often wished there was a way to disable this option.  Well, I got my wish. Now I see black dots around the field.  I don't know what I did or how to activate this feature.  Using LiveCycle 9.

  Hello:

  The feature is selected/off voltage using the:

  See the editor-online or

  Good luck!

  Stephen