Double click on the photo (my photo) causes PC freeze with message "not responding" (scheduled for the windows fax and picture viewer)
WINDOWS XP
"This program is not responding...". »
I then have to click on the right upper window X two times to close the window. When it closes Finally, everything on the desktop disappears for about 3 seconds then reappears as if the PC restarted, but it does not actually restart.
My images, the other day, all open without this feeze/final issue. I don't have these problems when you use Windows XP Paint, Jasc Paint Shop, or Quicktime to open images, once set by default... Just does not work with Windows Picture and Fax Viewer more and all my photos are already defined (default) to open with Windows Picture and Fax Viewer - clicking Properties confirms this.
Also, if I right click on the individual image to 'open with' and manually choose 'open with' Windows Picture and Fax Viewer, it will then open and I can scroll all the following pictures an image in Windows Picture and Fax Viewer. "But I can't just click on an individual picture, otherwise, it will freeze just straight up. Difficulty It Center Microsoft could not automatically repair because the shimgvw.dll file already exists.
I used to always use Windows Picture and Fax Viewer with no such problems. I have not the slightest idea what happened... even though I was messing around with 1) Component Services > Security Com > permissions & launch Activate and Run permissions) 2 > Regedit > Edit > "Permissions" last week and changed "Registered Owner" in HKEY LOCAL MACHINE and some other stuff like that. Could permissions and changing names have caused this unexpected problem in Windows Picture and Fax Viewer? If so, the changes I made will not be changed back, then how can I fix a broken Windows Picture and Fax Viewer? And if these changes, last week, have nothing to do with this "opening images in the image Windows and Fax Viewer problem,' so what?
I did your suggestion before posting here. I saw the same solution as your addition, the interpreter, but it does not solve the problem because I already had the shimgvw.dll etc. in their proper place and my photos/images were not always open with Windows Picture and Fax Viewer the way I wanted them to open.
Since I got my photos all open as I wanted (as before) this way to use Windows Picture and Fax viewer:
Control Panel > Folder Options > File Types: I changed then each file/folder associated with 'images' to open with Windows Picture and Fax Viewer. I determined this by reading the details for each extension / the item highlighted. If the referenced details 'images', I then clicked on change and choose Windows Picture and Fax Viewer to open the extension.
I went through everything everyone who was not obvious that they are. I made a change: BMP, GIF, EMF, JFIF, JPE, JPEG, etc... I changed at least 12 (more than I thought it was).
Immediately after changing all of these types of files, I rebooted and Windows Picture and Fax Viewer was still working the way I wanted to (as before).
Tags: Windows
Similar Questions
-
How to open .tif files using the Windows fax and picture viewer
I have the file open options set to use the viewer photo and fax Windows, however, it is always opens the .tif file in a window of IE. In reading the other posts regarding this problem, I think it may be a number of MIME, but nobody published how to fix this. Can someone send please how to change the MIME type so I can open the files in the right way. I REALLY appreciate it.
Windows XP SP3 with all updates and IE8.Thanks in advance,EricOriginal title: how IE8 to open a .tif file by using the Windows fax and picture viewer?Hello
I suggest that allows you to remove any CLSIDS listed under location:
HKEY_CLASSES_ROOT Type\image/tiff
Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows.
I hope this helps.
-
can't rotate pictures in the windows fax and picture viewer
I can't rotate my JPEG images in Windows Picture and Fax Viewer, I tried a number of different solutions, but none worked. Whenever I try to rotate an image saved on my memory stick it freezes. I also unchecked read-only and it reacts always not also tried using this command "" REGSVR32 SHIMGVW. "." DLL' reacts always do not. Please help thanks
When I copied a photo on my desk, it was easy to turn. I also tried another USB port, but it does not work. I tried system restore which did not work.
Copy all of the USB drive.
Format.
Copy everything back.
What is then?
-
Upward at the top where you put in the web site that you are looking so that it stores. I double click on the yellow star and it gives me an option to remove this site. However I can't do something just because it is not delete it.
Hi SKennedy1311,
There are several ways you can remove sites the location bar AutoComplete drop-down. It is probably easier for you to see than to explain. Take a look at the Awesome Bar - find your Firefox bookmarks, history, and the tabs in the address bar. This article will give you all the information you need.
Hope this helps!
-
whenever I try to use the windows fax and scan, I have this message:
whenever I try to use windows fax and scan, I have this message: Windows fax and scan cannot access your documents folder. Please, make sure that windows fax and scan can access this folder. How I do that?
Hi Mohamed
Thanks for your posting in the Microsoft community
You can check if you have my documents in C:\Users\ (username) \My documents correct location.
If the problem persists, you can deactivate and then activate Windows Fax and consolidated expansion of print and Document services from the windows on or off check and option features if this solves the problem.You will need to disable the function, and then click OK. Now open Windows Fax and Scanand check. Yet once activate the Windows Fax and Scan and check if you experience the same problem.
See the link below to display the window for the deactivation and activation windows fax and scan under Print and Document services and check option.
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-offOR
delete the file and create a directory named "Fax" to
c:\users\rich\Documents\ with subfolders called "Drafts", "Inbox", and
"Personal cover pages. You click Windows Fax and ScanIt will work
-
How can I get the Windows Fax and Scan program to scan mutiple page to a file rather than to each page into a separate file?
You don't, so use the scanning software provided by your device manufacturer, assuming that you have installed the unknown device with their installation cd or the download direct the full version of this site to the
-
What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?
What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?
Original title: Windows Fax and Scan
What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?
A piece of hardware called a Fax Modem, installed in or connected to your computer with the appropriate device drivers from the manufacturer of the device, you have installed in or connected to your computer. And a telephone line.
-
Uninstall the windows fax and scan
I was playing around with the scanning and fax for windows... I don't have a landline in this House... now, I can't find how to uninstall windows fax and scan... the constant noise, 'status of fax and scan audit' is a pain. How can I remove this work programme... Only, I use a cell phone and have a wireless (Wild Blue) connected to this computer system.
Go to the control panel and select programs and features.
On the left side, select Enable Windows features turn on or off
Scroll down to printing and Document services.
Select the sign more to develop.
Remove the control from Windows FAX and Scan.
Click OK.
That should do it.
-
remove 1 fax number from outlook to use the Windows fax and scan
I recently bought a new computer with Windows 7 operating system. I try to use Windows Fax and Scan to send a fax using my Outlook address book fax numbers. When I enter the phone number in Outlook it shows as (281) 555-1212. However, it converts the number of + 1 for each entry, regardless of how I implemented the rules of numbering or not. Then when I try to fax, I don't need + 1 to dial numbers, only the area code and the number. I can't do the 1 = go away. If I dial the number directly in the Fax Wizard, and then it composes correctly, but when pulling starting from Outlook address book that's messed up.
Basically, I don't have the + 1 to dial local numbers. Only the 10 digits. When I get a fax in Outlook number, it automatically formats it with the front 1. I found an article online that said that if I put a comma before the number to 10 digits, it forces the computer to dial only the numbers that I entered. It works fine when I do that, then my problem is solved. Thanks for responding.
-
When I double click the bookmark (star) button a window still down so I can change the bookmark or place it in the folder I want. Now, after the last update of FF13 (June 2012), I can click once and the page is a bookmark in the "home" folder, but when I double click nothing happens. (1) I restarted FF, did not help 2) I rebooted the computer, did not help.
You just click on the star once if the star is high already turned on to indicate that a site is bookmarked. Normally, you would click once to bookmark the current site, then click once, if you want to change the new bookmark. If you double-click and you open and close the pop-up edition.
After you enable hardware acceleration can cause problem with edit op - up doesn't work does not correctly, so in case of problems, you can disable hardware acceleration.
-
my windows vista OS does not have the windows fax and scan program
It does not seem that I have the fax of the window and he analyzes the program on my OS (Vista);
Hello
Vista home versions have included fax software
for this you need business or ultimate or business
you need 3rd party fax software if you have Vista Edition Home Basic or home premium
try to snappy fax:
-
Hello
I am writing a batch file to install applications in Windows (from 7 to 10).
However, I saw a strange (and altogether not expected) result of windows 8 to 10:
When I run the application in an admin profile by clicking twice in the .bat, it runs correctly, realize the instaler and run,
When I am in normal user and click with the right but "run as Administrator" it work properly as well
However when I am in admin profile and use the right-click > "Run as Administrator", the batch does not call .exe called in batch files.
When I run the .exe file straighway (on the .bat) that it works properly in the 3 ways (described previously)
Why is it for? How can I solve it? (I wish this works well in all 3 to bat as the .exe comum).
Thank you very much
Caroline
Hi Carolina,.
Thanks for posting in the Microsoft Community.
In view of the information provided by you, we ask you to return the request to the MSDN support team, because they are able to help you in this regard.
https://social.msdn.Microsoft.com/forums/en-us/home
Please let us know if you need any other help.
Thank you.
-
Windows fax and scan only saves the first page
When I use the windows fax and scan pages to analyze. You can get an overview of all the multiple pages scanned, but what emailing or save you then cannot see the first page.
Hello
If you're using a scanner with a charger of documents and Windows Fax and Scan, you can scan multiple pages into a single file of scanning to the TIFF (.tif) file format. For more information, see:
Scan a document or photo with Windows Fax and Scan
http://Windows.Microsoft.com/en-us/Windows7/scan-a-document-or-photo-with-Windows-fax-and-scanIf you use Windows Fax and Scan and a flat bed scanner, you can scan multiple images to separate files probably. Not all scanners flat have this ability, so you may need to contact the manufacturer of the scanner to get a driver so that your scanner flat may offer this option.
Reference:
Scanning: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/scanning-frequently-asked-questionsKind regards
Afzal Taher
Microsoft technical support engineer -
Help with registration of the PDF when using Windows Fax and Scan
When I use the Windows Fax and Scan, I'm trying to scan a document and then save it as a PDF file. What happens is when I save it, it opens Adope Photo Shop and will not let me save it as a PDF. How can I scan a document and then save it as a PDF in Windows 7.0?
If you have Word 2007 or later, you can scan it, then save it as a PDF. Works fine for me. I have a Canon LIDE 100 scanner, I bought for $50, which will also scan directly to PDF.
I hope this helps. Good luck.
-
Having just upgraded Windows 8.1 for Windows 10, my (old) version of Photo 5 elements crashes with a message "not responding" have double click on the jpg file. He always loaded the image at the point Windows 8.1.
Any ideas?
davids62398138 wrote:
Having just upgraded Windows 8.1 for Windows 10, my (old) version of Photo 5 elements crashes with a message "not responding" have double click on the jpg file. He always loaded the image at the point Windows 8.1.
Any ideas?
It was reported many problems with older versions of PSE and WIN10.
Can you open PSE from office or from the list of programs on the start menu?
Maybe you are looking for
-
Why replacement iPhones limited warranty period
In what circumstances is an iPhone provided with less than 12 months guarantee please.
-
My password is not be accepted by trying to download Garmin Express on my MacBook Pro.
-
Satellite M200 - wireless XP driver does not work
Hello I downgrade to Windows XP to my laptop Toshiba Satellite M200 coz Vista was slow, but now my wireless drivers do not work.I tried many drivers but the result is the same. Please suggest a solution. Thank you very much.
-
Hello! Something very strange is happening with my laptop (dv6-3060ee). Up to this day at noon, everything worked well, including the wireless network. So, I set my computer to Hibernate and came to the House of my parents. As I turn it on and try to
-
How to repair discs of original withoout Windwos Vista OS?
Original title: Vista repair without disc My mother has a laptop that she got from pc world. Windows vista was preinstalled, and it has not received the disk. The computer has just developed a problem and ask the computer to put the vista disc to try