Double clicking problem

Similar Questions

• After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  Is the name of an external drive or internal one?

• Problems with listbox - double click

  Hello community,

  I'm doing a program in which I'm building a dialog box by using the tab control and the user can double-click on one of the folders/files and this file must be read in the program and graphics need to be plotted.

  To do this, I use a Boolean control, if I activate it, I call a tab control with a ListBox in which I use the function of list folder to view all the files/folders in the directory I put. I was able to get the double click event to work and give me the correct path to play the file using the function "read from the spreadsheet. The part of the plot is now over, but I have problems when I try to run the program.

  The program was supposed to read the name of the cell that the user double click and only after that he reads the name I have change for a path access and then read. Which under its weight reads the file ListBox begins selected, as if I run the program once and double click on any file in the next run it will show the last selected file. The problem is that I am creating a node to invoke to reset the list box, but when I do this the program opens a dialog box to select the file to read.

  So what I need is to figure out how to do the program only runs after the user to double-click a cell, should not read the file already selected in previous executions. But I don't know what to do. Can you help me please?

  Thank you for your attention

  Lucas

  Faquim wrote:

  Well, I'm pretty new to Labview, barely a month to use it. As English is not my first language, so I do not understand some of the terms you used, like "cut upwards" or "conditions of competition" or how to clear indicators in the beginning of the program?

  ...

  The stacked sequence is to make actions happen in that order, that's how I learned. Local variables are also here because I don't know how to use the same variable twice or several times during a VI. Well, I'm still young enough for that.

  Well, you break the data flow by copying in indicators invisible only to re-read a nanosecond later. Indicators are for the user, not to store data. If you eliminate the structure of the sequence, you can wire things together directly. Data flow automatically determines the exact execution order. No required sequence.

  Faquim wrote:

  The stacked sequence is to make actions happen in that order, that's how I learned. Local variables are also here because I don't know how to use the same variable twice or several times during a VI. Well, I'm still young enough for that.

  indicators and variable local are NOT the 'variables', they are user interface elements.

  Joined a quick attempt at a code cleanup.

  All your operations of chain cable paths are still quite fragile. You should really exploited to the way datatypes. There are probably a few broken things because I can't test. However, it should give you some ideas.

• QUESTION OF THE WEEK... Expertise 101__File Type problem! (Xp SP3) _ question: when double clicking on a folder in the search engine database appears and no files appear.

  -problem happens after messing around with 'file types' in 'options folders' BUT the records may not configured properly to correct the open method by setting the 'file type' back to 'open' in the file types.

  QUESTION OF THE WEEK... Expertise 101

  History...

  I saw a tutorial online on how to change the icons of any file (text, folder, programs)
  In addition to the normal way to do it:

  The normal route was right - click folder, text, program or folder etc-> choose Properties > then choose Change icon

  The new way that I learned how to do that was - go to folder options in the control panel > choose the 'file types' tab > find folder icon, click on it > choose Advanced Options > then choose Change icon.

  The reason for me wanting to do other then the normal way is because I would like to point out that all RECORDS USE DIFFERENT TYPE of ICON RATHER THEN DEFAULT UGLY OF THAT folder BROWN ICON that windows XP USES

  the problem starts here... to (go into folder options in Control Panel > choose the 'file types' tab > find folder icon, click on it > choose Advanced Options > then choose Change icon.)

  Note that these are two icon files: the 'Change icon' button is available and highlighted on a launched the Advanced button, but not on the other...

  After messing around with New both of these icons of specific folder "Advanced settings" after closing and the application of the setting.

  What is happening now, it is that each folder I usually double-click thanks to my system all what happens is that the search method appears average while displaying no other files in the folder it self.

  I'm expieranced and you wrote the parameters passed to each "type of file"setting"for this purpose he adjusting back to the past and yet nothing happens...

  THE QUESTION IS >
  How to fix something like that

  &

  How do you get each folder in your system to view another icon rather than UGLY, LOW DOWN DIRTY DUNG COLORFUL FOLDER ICON DEFAULT.

  For the immediate problem:

  Doug Knox fix - http://www.dougknox.com/xp/scripts_desc/xp_folder_open.htm
  Search Companion starts if you double-click a folder or disk - http://windowsxp.mvps.org/searchwindow.htm
  For the desire to have different color records, you will need to use a third party software. Search on Wincustomize.com or similar sites that.
  MS - MVP - Elephant Boy computers - don't panic!

• Problems with the help of web camera, it shows it programs and on the desktop. But when I double click on it. It will go to the program do not know what to do. Help, please. Thank you.

  Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.

  Hello

  Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
  is supposed to work.

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• New window opening when the problem of double click even if I haven't changed in folder option but it not worked

  Dear sir\madam

  I am using the windows 7 every time I am double clicking in the drive and the folder open in the new window only. I even changed this option in the FOLDER AND SEARCH option, but it is futile his does not work. Friends by saying: it is a virus. Please help me solve this problem.

  Thanks and greetings

  AURÉLIE

  I am not sure, I've not had the problem myself, but a quick search found this - http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f

  Good reading and see if you think it's the same problem. If so and the choice of folder option certainly does not work for you, there are a few things to try to make up a batch file and it works from a simple sfc/scannow (I have not tried but it is marked as answer).

  It will be useful.

  If you suspect a virus, update your anti-virus software and run a full scan, then download, install, update and run a scan complete with (free) malwarebytes. Just run as free on demand, no need to check for any trial etc.

• problems with my mouse double click when it shouldn't be

  It is a rather strange problem, I'm going to, if anyone has had this problem. I have a user who gets a second click when it performs a normal left click. This happens not all the time, or about 30 percent of its results of clicks in a double click. I've done all I can think about, but nothing has worked. I've replaced the two (twice), the mouse and the keyboard (once), I slowed down the speed of the double click, I checked the settings of the mouse, nothing seems incorrect. It is an OptiPlex 3010 running W7 SP1 with all the critical updates taken. any suggestion would be appreciated. Thank you

  I have found this problem. Apparently the first time, I deleted the drivers and ran a reinstallation that it did not work properly. I tried again last night and he did run properly. Thanks for the reply but Osprey.

• How can I fix the problem of not being able to open files by double clicking with photoshop

  How can I fix the problem of not being able to open files with photoshop by double-clicking it in windows Explorer?

  This problem affects psd, jpg, and png files.  I get an error saying "the program can't start because adbeape.dll is missing on your computer.  I can open all these types of files in the menu 'open' in photoshop.  It is not a matter of them not having no not extensions.  I use windows 7.

  Thank you

  Thanks for the update.

  Just for test, could you please rename Photoshop.exe to Photoshop CC2015.exe location: C:\Program Files\Adobe\Adobe Photoshop CC2015

  then change the file association to the new renamed exe file and let us know if this helps or not.

• Problems detetecting Double click

  I am writing a game of solitaire.  The cards are Staples, buttonMode = true, mouseEnabled = true, doubleClick = true.

  I added event listeners for down, up, double_cliquez, click ON.

  I can't get the double click to work.  When I double click it is treated as a downward, upward, downstairs.

  I have problems because I need the idle state if I just want the card I need the event down.

  The PLACE that I use to release the drag.  But I can't get the double click event to never be recognized.

  I am using action script 3.

  Thanks for any help.

  You are welcome.

• Mouse problems. Double click to open things does not. Click to create a link in IE also does not work.

  When something can be simple click it to open it, it works. If there must be double clicked and then it doesn't. Also, the links in Internet Explorer work by clicking with the mouse. Am so frustrated. Tried every difficulty that I could find on the web & does not. Use a different mouse, reinstalled the drivers, nothing. Switched left button to be single click to open in settings - did not work. Have to use Tab to navigate something, so it is highlighted. Press "enter" and then it opens if this is the main screen, in a folder or in IE. Help... Please! Thank you.

  Leiden,

  In my view, there was a point he was working again properly. I suggest to do a System Restore and see if it helps
  See you soon ~!

• I have Adobe Photoshop elements 11 on my computer. I used a lot but recently my problem is that on the grid the photos show nothing... only an hourglass. If I double click on the photo then shows in its entirety. I did uninstall and reinstall the bu progr

  On the grid, my pictures show nothing that hourglasses! If I double click on an hourglass the slideshow perfectly in its entirety. It's very frustrating. I tried everything I could think and even uninstalling and reinstalling... still the same program; On a grid of photos imported, just a series of hourglasses!. I need help.

  catherinea7777 wrote:

  On the grid, my pictures show nothing that hourglasses! If I double click on an hourglass the slideshow perfectly in its entirety. It's very frustrating. I tried everything I could think and even uninstalling and reinstalling... still the same program; On a grid of photos imported, just a series of hourglasses!. I need help.

  See:

  Photoshop elements (PSE) knowledge base. : how the miniature correct hourglass (generic) in elements Organizer?

• Double-click the problem?

  Double-click event does not work to Datagrid? How can I solve it?

  Hi flex_kkm,

  You must enable fisrt doubleClickEnabled = "true" in the DataGrid control. Check the sample below:

  
  http://www.Adobe.com/2006/mxml"layout ="absolute">
  
    Import mx.controls.Alert;
  ]]>
  
  
   
     Test1
     price1
     album1
   
   
     test2
     price2
     album2
   
  
  
   
   
   
   
   
  
  

  If this post answers your question or assistance, please mark it as such.

  Thank you

  Jean Claude Chari

• double click on the flash button problem

  How to make a flash button to work on 1 click instead of double click

  It's only IE behavior due to changes, that Microsoft has made several
  years to their browser, on how Active Content (Flash, Quicktime
  etc)
  is managed, after losing a high-profile trial.

  http://blog.deconcept.com/2005/12/15/Internet-Explorer-Eolas-changes-and-the-Flash-plugin/

  Background:
  http://en.Wikipedia.org/wiki/Eolas

  See also
  http://www.Adobe.com/devnet/ActiveContent/

  If you are running Dreamweaver 8.0.2/CS3, the fix is already integrated to DW
  interface.

  Otherwise, try http://blog.deconcept.com/swfobject/

  Furthermore, if you want to use Flash for navigation, consider this-

  1. some people not having Flash installed - what are doing?
  2. the motors don't parse Flash links - your site will not be spidered
  3. the display of the devices and accessories functional don't parse links Flash - which users will be
  do?
  4 DW cannot maintain links within a Flash movie, so if you move or rename
  a file linked, will break your navigation - what will do you?

  It is generally a bad idea for these reasons...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "gsnservices" wrote in message
  News:ffbfuv$S7T$1@forums. Macromedia.com...
  > Yes, the button has a link that works, you just have to dbl click it. When
  > you first click you get a box around the button, click New, and need
  > you for the link

• A double click of files no longer works.

  As I installed Microsoft Office 2011 for Mac on my MacBook Pro, there are a lot of files that I can not open more using double click. I tried to change the double-click settings in the preferences panel, and by assigning a specific application for opening each type of problematic file using the button 'Open with' in the information panel, nothing happens.

  I also tried to restart the computer, and I fixed the permissions of the main HARD drive. None of this has worked.

  What is curious, it's only by double-clicking on a file actually seems to start the application. The application icon bounces for a while, as if she was trying to open. But after seconds of bouncing icon, the icon 'block' is displayed (do not know the exact name of this icon - it's this formidable multicolor spinning I speak). The application icon bounces for a minute or more with the projection of icon "hang" and then the application closes (without any message about some crash) or I use "Force quit" to close.

  At the present time, I have to open the app for files that don't work ( Word files .doc and .docx, Preview for .jpg, .tiff, .png, and .gif files, Safari or another web browser for .html and .url files) to make them work. It goes same for my photo files RAW (.pef), which won't open in Capture One Pro more when you use the double click.

  I have not tried other image far files

  It is, it prevents the newly installed applications to open as well. Today, I tried to open a demo app I downloaded a third party developer (i.e., not Apple), and its icon tossed around for a minute before he quit. I did not yet have the window with the message "you are about to open an app from a [...]', asking if I want to open the file or not.

  Everyone knows about this problem? More important, nobody knows how to fix?

  Any advice would be appreciated. Thank you.

  I tried to find some more information on the issue throughout the day, looking in the forums, websites, etc. I couldn't find anything on this issue.

  I was about to give up, but I decided to reboot once more, just to see if it would change anything. Seems the restart was once again the key to success. Perhaps refreshing memory has been the key to solve the problem.

  Detective Conan, I hope.

• Dictionary by double clicking on a word in the text don't work at IOS 10

  Since yesterday I installed IOS10 in my iPad Pro, when I read an e-book and I double click on a Word, there is no option. I closed the application and he straightened, closed the iPad and turned back on and the problem persists. In iBooks, the screen looks like not sensitive at all. Little help? Thank you.

  I never did the path of double click. I always slightly pressed a Word to select it, which then pulls up the menu (looks like they changed the definition to look it up). It works for you? By slightly pressing on one word as you would if you start to highlight a line and then let go as soon as the Magnifier window appears?