double configuration map
Hi guys, I have a Mac Pro 2008 8 core 2.8ghz 32 gb of ram running a 1 to RAID 0 El Captian a 2600XT (APPLE) and a HD5870 (not APPLE). My question is how do these cards function? I want a double configuration monitor, but I also want the start screen, so I can trouble shoot. If I put a tft one card and the other tft to another, how will it happen? Photoshop will run better on the screen with the best card? Sorry, but used to SLi in windows. Any help or advice on this would be very useful.
Thank you
Steve
Only one card flashed Mac will display a splash screen. Looks like the HD5870 is not a card flashed to Mac.
Some functions/effects in Photoshop can use a graphics card for the treatment and thus accelerate this function.
The 2600XT is not supported I think and by the following
https://forums.Adobe.com/thread/1052185
the HD5670 won't help much if any in CS4 and later versions
2600 XT can support two monitors by itself
Tags: Mac
Similar Questions
-
If the title says it all. I'm trying to set up two monitors on my HP EliteDesk 800 G1 SFF. Here is my configuration:
1. first monitor (Acer B223W) lights DisplayPort and displays things normally.
2. second monitor (HP LP2065) is on the VGA port.
The problem is that my second port monitor never gets a signal from the machine and going to sleep mode. Connect the second monitor changes my main screen at a desk empty (no icons, no taskbar, just a plain painted paper), which I believe means it tries to use my VGA monitor as main display.
However, the VGA monitor never seems to show anything. I spent my main screen on the first monitor successfully too, but is not all about him either.
Dear customer,
Welcome to the HP consumer's Support Forum!
Please try and update the video driver following, chipset and BIOS:
Intel Graphics Driver (64-bit) (International):
Intel Chipset drivers:
BIOS:
In case the problem persists, please exchange the monitor and VGA cables cables once and check.
Try and clear CMOS by following the steps below:
1. turn off the computer and unplug the power cord from the power outlet.
2. remove the access panel.
3. on the system board, hold down the CMOS button for 5 seconds.
4. replace the chassis access panel and reconnect the power cord.
5 turn on the computer and let it boot.Hope this helps, for other queries in response to the post and feel free to join us again.
* Click on the star of CONGRATULATIONS on the left to say thank you *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
GR1
Although I am an employee of HP, I speak for myself and not for HP -
Double configuration band WRT320N
I bought the WRT320N so that I could use dual band to separate my traffic g wireless of my Wireless N traffic to avoid that the g's dragging down the speed of traffic n. However my router uses one or the other. Is it possible to configure the router to provide two bands at the same time? Thank you
Lol the WRT320N is a single radio. It is not simultaneous dual-band/dual radio. You can use the 2.4 GHz band or 5 GHz range, but not both at the same time.
-
T43 w / Port Rep II - double configuration external monitor
Hello
I have a T43 with ATI chipset. I'm running it in a configuration with dual monitor with the laptop LCD and an external monitor connected to the docking station. I would use 2 external monitors via the docking station DVI and VGA connectors, but I can not understand how to get the system to pass the laptop LCD with DVI. Is this possible? If so, how?
I am running XP.
Many thanks for any help!
Fred
go into your bios, select vga + dvi + internal display.
-
How to configure map physical NETWORK on the trunk on an ESXi Server
I have a Server Setup ESXi and I want to be able to have virtual machines in different VLANS. I have set up my Cisco port to the trunk. I can't find where I put the physical NETWORK adapter on my ESXi on the trunk. Is this possible in the ESXi? Once I have set up on the side of Cisco, I lose connectivity to the virtual computer because the NIC ESXi is not trunking.
There are a few things that you must be aware. If your vlan native is not network management vlan that you will need to label the management network to the vlan in ESXi. You attach VLAN to trade. The management network is essentially a GROUP of ports in order to entrust a vlan, you will have to go to configuration-> network-> and click Properties to the vSwitch i.e. on the management network. Usually vSwitch0. In there, you can then click on the network of Managment and edit and assign a vlan.
In addition, if you want to have multiple attached networks to some VLAN different, you'll need create a portgroup to each of them and assign a vlan to each.
SID Smith
-
-
Double configuration band EA6500 with network gateway
I recently bought the EA6500 to replace an old router. I went through the Setup process and were able to connect all the currencies I wanted to-PC, printers, televisions, games, phones and tablets. They have all see and connect to the INternet through the router. My problem - they do not see each other. When I pull the network on my PC it sees only the router and the Internet. When I look at the list of devices on the Smart Wi - Fi, all devices are there. My ISP is Cox Cable, my laptops are a Lenovo on Windows 7 and an ASUS on Windows 10.
Should what settings I change my PC sees the printer?
Thanks for your help.
By chance the guest network is enabled? If yes maybe printers connected to it. Disable the network of comments and see if printers turn off linr. Or look at the printers and see if they are on the same subnet. All on the same network should be with an ip of 192.168.1.x address only the last set of numbers must be different.
-
Double configuration monitor - looking for an optimal Solution
HP Compaq DC5850 Small Form Factor PC Professional
Windows XP
Computer - 1 VGA port
1 DVI - D port
Monitor current- 1 HDMI port
1 VGA port
If I buy a second monitor LG LED 35 23M going to work: if I plug the first monitor into the VGA of the computer port and port VGA display using a VGA cable. Then I plug the second monitor into the port on the computer's DVI - D and HDMI port on the monitor using a DVI - D cable with HDMI adapter?
Technical reference guide:
You can use two ports, you should test if a dvi - d to hdmi connection will work.
Sometimes a source dvi-d does support hdmi - if you already have a monitor, just test it.
HTH
C.
-
Double configuration monitor - only a monitor displays the login screen 2nd monitor is black
Hello, I searched Hi and low and starts to believe that it is just not possible from messages of others. But since the last time this question has been posted in 2011, I'm hoping that there was a resolution.
How can I get my secondary monitor to show an image (any image would be great), while my computer is locked or simply putting in operation and reached the login screen. Currently my secondary monitor shows just a black screen. I do not want my screen to extend completely on two monitors (mosaic on nvidia video card) because when I do, my taskbar spans also the length of the two screens. I like to use click once on my programs, rather than cluttering up my desktop with icons and you install vertically between the two monitors. I am unable to do otherwise. Please let me know if anyone knows how to do this. Thank you
Hello
Please contact Microsoft Community.
I suggest you follow the steps mentioned and see if it helps:
Method 1:
Duplicate the display settings and check if you can view the screen saver in the monitor extended as well.
To change your display settings
1. open the screen resolution by clicking on the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
2. click on the dropdown next to several screens, click on duplicate these appear, and then click OK.
The option appears only when Windows detects multiple displays, more than one monitor connected to your PC.
Note:
o If you don't see an option named multiple displays in your display settings, then Windows isn't detecting a second monitor plugged into your desktop computer. Or else, it does not detect an external monitor plugged into your laptop. When Windows detects this monitor, it will appear in the drop-down list next to the screen. If you do not see that what listed there, try click on Detect.
o ensure that the monitor you want to extend your desktop to is turned on and plugged into the video port appropriate to your computer. You may also need to select the correct source labeled on the controls of your monitor to ensure that the monitor is using the correct video port. For more information, consult the manual of your monitor or go to the manufacturer's Web site.
For more information, see the following link:
Move windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors
Method 2:
I suggest you to check the display resolution value for both monitors. Make sure that the resolution of the screen is the same on each display.
For more information, see: get the best display on your monitor
http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor
I hope this helps. Let us know the result.
-
32 x 1 double switch configuration PXI-2527 and TB-2627
Looking for configuration of the PXI-2527 at double 32 x 1 using a TB-2627 terminal block. Under the OR rocking support for topology multiplexer NI PXI/SMU-2527 1 double wire 32 × 1 -.
(link - http://zone.ni.com/reference/en-XX/help/375472C-01/switch/2527_dual_1-wire_32x1_mux/) it displays the names of software for different PIN numbers. I don't care actually on this subject because I use the Terminal Board, but what worries me is that the diagrams represent Ch0-Ch31 connection com0 + and Ch32-Ch64 to com1 + and there is NO mention of com0 - or com1. However, the NI TB-2627 installation instructions, table 4 shows the mapping Terminal double 32 x 1 1 - Wire topology. In this map, IT lists a software name and the name of Terminal for com0 - and com1-.
My question is, if com0 and com1 - are not listed in the manual switch why are the listed in the TB-2627 manul and what is it in this configuration?
Thanks for your time.
In the Setup instructions for the double configuration 32 x 1 TB-2627, she mentions Com0 - and Com1 - as a reference to inform the user what pin connects to since this same module can be used with other topologies. It is unnecessary for the topology of 32 x 1 information double since the switch card does not use these channels for this particular topology. Information is available for your reference, but does not neet to be connected to anything.
Please let me know if any of this is unclear.
Kyle K.
-
Double room Nexus 2348UPQ / Max ports for vPC links
Hi people,
Cisco Nexus 2348UPQ has 24 to 10 GB uplink interfaces. Supposedly on the distribution layer, we have a pair of Cisco Nexus 5548UP, how many ports we can group about 2348 for vPC for double-homing links.
Thank you very much!!!
Hi Chris,
Using an Extender of fabric with a Cisco Nexus 5000 and 6000 Series Switch Cisco Nexus
-If you decide to use the drop cable instead of the 40 G uplinks, please note the following limitation:
The 2348TQ of Cisco Nexus and Nexus 2348UPQ FEX, if a port channel is used to connect a switch parent with a tissue Expander device, the port channels can have up to 8 ports.
Nexus 2348 FEX devices have a total of 6 * 40 Gigabit Ethernet uplink ports to the parent switch. If these are used with native port of 40G uplinks on a switch of parent, there is no limitation. 6 ports can be used in a hosted configuration only hosted or double. You can also use 40 Gigabit Ethernet uplink ports on the extensor of N2348 fabric with 10 Gigabit Ethernet ports on the switch to parent when it is used with the appropriate wiring. A maximum of 8 ports can be added to the string of port between the parent switch and the fabric Extender. If it's a double hosted configuration, VPC for the extensor of fabric, only 4 ports per switch are allowed in the channel of the port.
Cisco Nexus 5600 series NX - OS Layer 2 switching Configuration Guide, version 7.x - configuration of the fabric Extender
-SFP support and cables are listed in the Cisco Nexus 2300 platform fabric Extender card (http://www.cisco.com/c/en/us/products/collateral/switches/nexus-2000-series-fabric-extenders/datasheet-c78-731663.html).
I'd be suspicious of this bug;
https://Tools.Cisco.com/bugsearch/bug/CSCuu88175/?reffering_site=dumpcr
"If it's a double configuration hosted, vpc for fex, that only 4 ports per switch are permitted in the Port-Channel"
HTH,
Qiese Sa'di
-
If you use LDAP attributes to map users to a specific group on the SAA is it necessary for group lock if I want a user to connect to a single group? I use the Cisco-Group Policy attribute to map an LDAP attribute = an employee service e.g. sales, marketing, research, etc..
Kind regards
Charles
No, if you already configure map LDAP attribute, then there is no need to configure Group locking because map LDAP attribute will automatically map the user to the specific group policy you have created through mapping.
Hope that answers your question.
-
My Windows 7 (64 Ulti.) breaks down to watch video online or playing games online.
My Windows 7 (Ultimate 64), m9058n, Pavilion Elite HP, seems to have serious problems. Whenever I'm playing games such as (TF2/steam games) or try and watch videos/flash things online, it appears to hang. What is happening is the monitor turns off, then the round ends. Just browse web pages or by looking at the Office does not this at all. No idea what this could be. Supposedly, my drivers are up to date, please help! Thanks in advance!
Info:
------------------
Information System
------------------
Time of this report: 21/11/2009, 20:11:57
Computer name: HAYDON-PC
Operating system: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
Language: English (regional setting: English)
System manufacturer: HP-Pavilion
System model: GN693AA-ABA m9058n
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: AMD Athlon (TM) 64 X 2 Dual Core Processor 6000 + (2 CPUs), ~3.0GHz
Memory: 3072 MB RAM
Available OS memory: 3070MB RAM
Page file: 1011MB used, 5127 MB of available space
Windows Dir: C:\Windows
DirectX version: DirectX 11
DX setup parameters: not found
DPI setting: Using System DPI
System DPI setting: 96 DPI (100%)
DWM DPI Scaling: disabled
DxDiag Version: 6.01.7600.16385 32 bit Unicode------------
DxDiag Notes
------------
Display 1 tab: No problems found.
Sound tab 1: No problems found.
2 Audio tab: No problems found.
3 Audio tab: No problems found.
Input tab: no problems found.--------------------
DirectX Debug levels
--------------------
Direct3D: 0/4 (detail)
DirectDraw: 0/4 (detail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (detail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (detail)---------------
Display devices
---------------
Card name: NVIDIA GeForce 8400 GS
Manufacturer: NVIDIA
Track type: GeForce 8400 GS
DAC type: Integrated RAMDAC
The device key: Enum\PCI\VEN_10DE & DEV_0422 & SUBSYS_050A1043 & REV_A1
Memory display: 1523 MB
Dedicated memory: 243 MB
Shared memory: 1279 MB
Current mode: 1440 x 900 (32 bit) (60 Hz)
Name of the monitor: generic Non - PnP monitor
Monitor model: unknown
Monitor-Id:
Native mode: unknown
Output type: HD15
Driver name: nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um
The driver file version: 8.15.0011.8627 (English)
Driver version: 8.15.11.8627
DDI version: 10
: Model WDDM 1.1 driver
Driver attributes: Final retail
Driver Date/size: 26/06/2009-21:01, 9476608 bytes
WHQL Logo would be: n/a
WHQL Date stamp: n/a
The instrument identifier: {D7B71E3E-4762-11CF-4052-012501C2C535}
Vendor ID: 0x10DE
Device ID: 0 x 0422
SubSys ID: 0x050A1043
Revision ID: 0x00A1
Strong name of the driver: oem8.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section005:8.15.11.8627:pci\ven_10de&dev_0422&subsys_050a1043
The driver rating: 00E60001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C
Deinterlace caps: {6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
D3d9 Overlay: support
DXVA-HD: support
DDraw status: enabled
D3D status: enabled
AGP status: enabled-------------
Sound Devices
-------------
Description: Speakers (Realtek High Definition Audio)
Default audio playback: Yes
Default voice playback: Yes
Hardware ID: HDAUDIO\FUNC_01 & VEN_10EC & DEV_0888 & SUBSYS_103C2A58 & REV_1001
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver name: RTKVHD64.sys
Driver version: 6.00.0001.5910 (English)
Driver attributes: Final retail
WHQL Logo would be: n/a
Date and size: 2009-08-04 09:50:58, 1973792 bytes
Other files:
Driver provider: Realtek Semiconductor Corp.
HW Accel level: basic
Cap flags: 0xF1F
Min/Max sample rate: 100, 200000
Mix beef static/Strm HW: 1, 0
Static/Strm HW 3D steers: 0, 0
HW memory: 0
Management of the voice: No.
Listen/Src/EAX (TM) 2.0: No, no
Listen/Src/I3DL2 (TM): No, no
Sensaura (TM) ZoomFX (tm): No.Description: Realtek HDMI Output (Realtek High Definition Audio)
Default audio playback: No.
Default voice playback: no
Hardware ID: HDAUDIO\FUNC_01 & VEN_10EC & DEV_0888 & SUBSYS_103C2A58 & REV_1001
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver name: RTKVHD64.sys
Driver version: 6.00.0001.5910 (English)
Driver attributes: Final retail
WHQL Logo would be: n/a
Date and size: 2009-08-04 09:50:58, 1973792 bytes
Other files:
Driver provider: Realtek Semiconductor Corp.
HW Accel level: basic
Cap flags: 0xF1F
Min/Max sample rate: 100, 200000
Mix beef static/Strm HW: 1, 0
Static/Strm HW 3D steers: 0, 0
HW memory: 0
Management of the voice: No.
Listen/Src/EAX (TM) 2.0: No, no
Listen/Src/I3DL2 (TM): No, no
Sensaura (TM) ZoomFX (tm): No.Description: Realtek Digital Output (Realtek High Definition Audio)
Default audio playback: No.
Default voice playback: no
Hardware ID: HDAUDIO\FUNC_01 & VEN_10EC & DEV_0888 & SUBSYS_103C2A58 & REV_1001
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver name: RTKVHD64.sys
Driver version: 6.00.0001.5910 (English)
Driver attributes: Final retail
WHQL Logo would be: n/a
Date and size: 2009-08-04 09:50:58, 1973792 bytes
Other files:
Driver provider: Realtek Semiconductor Corp.
HW Accel level: basic
Cap flags: 0xF1F
Min/Max sample rate: 100, 200000
Mix beef static/Strm HW: 1, 0
Static/Strm HW 3D steers: 0, 0
HW memory: 0
Management of the voice: No.
Listen/Src/EAX (TM) 2.0: No, no
Listen/Src/I3DL2 (TM): No, no
Sensaura (TM) ZoomFX (tm): No.---------------------
Sound Capture devices
---------------------
-------------------
DirectInput devices
-------------------
Device name: mouse
Joint: 1
Controller ID: n/a
Vendor/product ID: n/a
FF driver: n/aDevice name: keyboard
Joint: 1
Controller ID: n/a
Vendor/product ID: n/a
FF driver: n/aDevice name: Microsoft eHome infrared transceiver
Joint: 1
Controller ID: 0 x 0
Suppliers of products/ID: 0x045E, 0x006D
FF driver: n/aDevice name: Microsoft eHome infrared transceiver
Joint: 1
Controller ID: 0 x 0
Suppliers of products/ID: 0x045E, 0x006D
FF driver: n/aDevice name: Microsoft eHome infrared transceiver
Joint: 1
Controller ID: 0 x 0
Suppliers of products/ID: 0x045E, 0x006D
FF driver: n/aDevice name: Microsoft eHome infrared transceiver
Joint: 1
Controller ID: 0 x 0
Suppliers of products/ID: 0x045E, 0x006D
FF driver: n/aDevice name: USB receiver
Joint: 1
Controller ID: 0 x 0
Suppliers of products/ID: 0x046D, 0xC525
FF driver: n/aDevice name: USB receiver
Joint: 1
Controller ID: 0 x 0
Suppliers of products/ID: 0x046D, 0xC525
FF driver: n/aDevice name: USB receiver
Joint: 1
Controller ID: 0 x 0
Suppliers of products/ID: 0x046D, 0xC525
FF driver: n/aDevice name: USB multimedia keyboard
Joint: 1
Controller ID: 0 x 0
Suppliers of products/ID: 0x046E, 0 x 5542
FF driver: n/aDevice name: USB multimedia keyboard
Joint: 1
Controller ID: 0 x 0
Suppliers of products/ID: 0x046E, 0 x 5542
FF driver: n/aDevice name: USB multimedia keyboard
Joint: 1
Controller ID: 0 x 0
Suppliers of products/ID: 0x046E, 0 x 5542
FF driver: n/aPoll w / Interrupt: No.
-----------
USB devices
-----------
+ USB root hub
| Suppliers of products/ID: 0x10DE, 0x03F1
| Matching Device ID: usb\root_hub
| Service: usbhub----------------
Gameport devices
----------------------------
PS/2 devices
------------
+ Microsoft eHome Remote control keyboard
| Matching device ID: hid\irdevicev2 & col05
| Service: kbdhid
|
+ Keyboard MCIR Microsoft eHome
| Matching device ID: hid\irdevicev2 & col06
| Service: kbdhid
|
+ Microsoft eHome MCIR 109 keyboard
| Matching device ID: hid\irdevicev2 & col07
| Service: kbdhid
|
+ Keyboard HID device
| Suppliers of products/ID: 0x046E, 0 x 5542
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ Server terminal keyboard driver
| Matching Device ID: root\rdp_kbd
| High filters: kbdclass
| Service: TermDD
|
+ HID-compliant mouse
| Matching Device ID: hid_device_system_mouse
| Service: me
|
+ HID-compliant mouse
| Suppliers of products/ID: 0x046D, 0xC525
| Matching Device ID: hid_device_system_mouse
| Service: me
|
+ Terminal Server mouse driver
| Matching Device ID: root\rdp_mou
| High filters: mouclass
| Service: TermDD------------------------
Disk & CD-ROM/DVD-ROM readers
------------------------
Drive: C:
Free space: 260.0 GB
Total space: 305,2 GB
File system: NTFS
Model: ST332082 0AS SCSI Disk DeviceDrive: D:
Model: TSSTcorp TS-H653L SCSI CdRom Device CD/DVGW
Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7600.16385 (in English), 0 bytes--------------
System devices
--------------
Name: ViXS PureTV-U 48B 0 (NTSC/ATSC Combo)
Device ID: PCI\VEN_1745 & DEV_2100 & SUBSYS_48B01043 & REV_00\4 & 2F5C931B & 0 & 0058
Pilot: s/oName: Standard enhanced PCI to USB Host Controller
Device ID: PCI\VEN_10DE & DEV_03F2 & SUBSYS_2A58103C & REV_A3\3 & 2411E6FE & 1 & 11
Pilot: s/oName: Bridge PCI to PCI standard PCI
Device ID: PCI\VEN_10DE & DEV_03E8 & SUBSYS_2A58103C & REV_A2\3 & 2411E6FE & 1 & 48
Pilot: s/oName: Modem-Build CX11256
Device ID: PCI\VEN_14F1 & DEV_2F20 & SUBSYS_200C14F1 & REV_00\4 & 289C41FE & 0 & 5020
Pilot: s/oName: OpenHCD Standard USB host controller
Device ID: PCI\VEN_10DE & DEV_03F1 & SUBSYS_2A58103C & REV_A3\3 & 2411E6FE & 1 & 10
Pilot: s/oName: PCI standard ISA bridge
Device ID: PCI\VEN_10DE & DEV_03E0 & SUBSYS_2A58103C & REV_A2\3 & 2411E6FE & 1 & 08
Pilot: s/oName: Compatible OHCI 1394 LSI host controller
Device ID: PCI\VEN_11C1 & DEV_5811 & SUBSYS_2A58103C & REV_70\4 & 289C41FE & 0 & 2820
Pilot: s/oName: High Definition Audio Controller
Device ID: PCI\VEN_10DE & DEV_03F0 & SUBSYS_2A58103C & REV_A2\3 & 2411E6FE & 1 & 28
Pilot: s/oName: AMD Setup various
Device ID: PCI\VEN_1022 & DEV_1103 & SUBSYS_00000000 & REV_00\3 & 2411E6FE & 1 & C3
Pilot: s/oName: NVIDIA GeForce 8400 GS
Device ID: PCI\VEN_10DE & DEV_0422 & SUBSYS_050A1043 & REV_A1\4 & 85B141D & 0 & 0048
Pilot: s/oName: NVIDIA nForce Networking Controller
Device ID: PCI\VEN_10DE & DEV_03EF & SUBSYS_2A58103C & REV_A2\3 & 2411E6FE & 1 & 38
Pilot: s/oName: Configuration of the HyperTransport (MC) and DRAM AMD tracking Mode
Device ID: PCI\VEN_1022 & DEV_1102 & SUBSYS_00000000 & REV_00\3 & 2411E6FE & 1 C2
Pilot: s/oName: NVIDIA nForce Serial ATA Controller
Device ID: PCI\VEN_10DE & DEV_03F6 & SUBSYS_2A58103C & REV_A2\3 & 2411E6FE & 1 & 41
Pilot: s/oName: Standard double channel PCI IDE Controller
Device ID: PCI\VEN_10DE & DEV_03EC & SUBSYS_2A58103C & REV_A2\3 & 2411E6FE & 1 & 30
Pilot: s/oName: AMD Configuration map address
Device ID: PCI\VEN_1022 & DEV_1101 & SUBSYS_00000000 & REV_00\3 & 2411E6FE & 1 & C1
Pilot: s/oName: NVIDIA nForce Serial ATA Controller
Device ID: PCI\VEN_10DE & DEV_03F6 & SUBSYS_2A58103C & REV_A2\3 & 2411E6FE & 1 & 40
Pilot: s/oName: NVIDIA nForce PCI System Management
Device ID: PCI\VEN_10DE & DEV_03EB & SUBSYS_2A58103C & REV_A2\3 & 2411E6FE & 1 & 09
Pilot: s/oName: AMD HyperTransport (MC) Configuration
Device ID: PCI\VEN_1022 & DEV_1100 & SUBSYS_00000000 & REV_00\3 & 2411E6FE & 1 & C0
Pilot: s/oName: PCI standard RAM controller
Device ID: PCI\VEN_10DE & DEV_03F5 & SUBSYS_2A58103C & REV_A2\3 & 2411E6FE & 1 & 0
Pilot: s/oName: PCI standard RAM controller
Device ID: PCI\VEN_10DE & DEV_03EA & SUBSYS_2A58103C & REV_A1\3 & 2411E6FE & 1 & 00
Pilot: s/oName: Bridge PCI to PCI standard PCI
Device ID: PCI\VEN_10DE & DEV_03F3 & SUBSYS_2A58103C & REV_A1\3 & 2411E6FE & 1 & 20
Pilot: s/oName: Bridge PCI to PCI standard PCI
Device ID: PCI\VEN_10DE & DEV_03E9 & SUBSYS_2A58103C & REV_A2\3 & 2411E6FE & 1 & 58
Pilot: s/o------------------
DirectShow filters
------------------DirectShow filters:
WMAudio Decoder DMO, 0 x 00800800, 1, 1, WMADMOD. DLL, 6.01.7600.16385
WMAPro over S/PDIF DMO, 0 x 00600800, 1, 1, WMADMOD. DLL, 6.01.7600.16385
WMSpeech Decoder DMO, 0 x 00600800, 1, 1, WMSPDMOD. DLL, 6.01.7600.16385
MP3 DMO, 0 x 00600800, 1, 1, mp3dmod.dll, 6.01.7600.16385 decoder
Mpeg4s decoder DMO, 0 x 00800001, 1, 1, mp4sdecd.dll, 6.01.7600.16385
Decoder WMV DMO, 0 x 00600800, 1 screen, 1, wmvsdecd.dll, 6.01.7600.16385
Decoder DMO WMVideo, 0 x 00800001, 1, 1, wmvdecod.dll, 6.01.7600.16385
Mpeg43 decoder DMO, 0 x 00800001, 1, 1, mp43decd.dll, 6.01.7600.16385
MPEG4 Decoder DMO, 0 x 00800001, 1, 1, mpg4decd.dll, 6.01.7600.16385
DV Muxer, 0x00400000, 0, 0, qdv.dll, 6.06.7600.16385
Converter, 0 x 00400001, 1, 1, quartz.dll, 6.06.7600.16385 color space
Reader, 0x00400000, 0, 0, qasf.dll, WM ASF 12.00.7600.16385
Filter, 0 x 00200000, 0, 1, wmpsrcwp.dll, 12.00.7600.16385 screenshot
AVI Splitter, 0 x 00600000, 1, 1, quartz.dll, 6.06.7600.16385
VGA 16 color Ditherer, 0 x 00400000, 1, 1, quartz.dll, 6.06.7600.16385
SBE2MediaTypeProfile, 0 x 00200000, 0, 0, SBE.dll, 6.06.7600.16385
Microsoft DTV - DVD video Decoder, 0x005fffff, 2, 4, msmpeg2vdec.dll, 6.01.7140.0000
AC3 parser Filter, 0 x 00600000, 1, 1, mpg2splt.ax, 6.06.7600.16385
StreamBufferSink, 0 x 00200000, 0, 0, sbe.dll, 6.06.7600.16385
MJPEG Decompressor, 0 x 00600000, 1, 1, quartz.dll, 6.06.7600.16385
MPEG-I Stream Splitter, 0 x 00600000, 1, 2, quartz.dll, 6.06.7600.16385
Parser, 0 x 00400000, 1, 1, quartz.dll, 6.06.7600.16385 SAMI (CC)
The IST Codec, 0 x 00600000, 1, 4, VBICodec.ax, 6.06.7600.16385
MPEG-2 Splitter, 0x005fffff, 1, 0, mpg2splt.ax, 6.06.7600.16385
Filter, 0 x 00200000, 2, 5, cca.dll, 6.06.7600.16385 analysis of closed captioning
SBE2FileScan, 0 x 00200000, 0, 0, SBE.dll, 6.06.7600.16385
Microsoft MPEG-2 video encoding, 0 x 00200000, 1, 1, msmpeg2enc.dll, 6.01.7600.16385
Renderer, 0 x 00800001, 1, 0, quartz.dll, 6.06.7600.16385 Script command internal
MPEG Audio Decoder, 0 x 03680001, 1, 1, quartz.dll, 6.06.7600.16385
DV Splitter, 0 x 00600000, 1, 2, qdv.dll, 6.06.7600.16385
Video Mixing Renderer 9 0 x 00200000, 1, 0, quartz.dll, 6.06.7600.16385
Microsoft MPEG - 2 encode, 0 x 00200000, 2, 1, msmpeg2enc.dll, 6.01.7600.16385
ACM Wrapper, 0 x 00600000, 1, 1, quartz.dll, 6.06.7600.16385
Video Renderer, 0 x 00800001, 1, 0, quartz.dll, 6.06.7600.16385
Video stream MPEG - 2 Analyzer, 0 x 00200000, 0, 0, sbe.dll, 6.06.7600.16385
Line 21 Decoder, 0 x 00600000, 1, 1, qdvd.dll, 6.06.7600.16385
Port video Manager, 0 x 00600000, 2, 1, quartz.dll, 6.06.7600.16385
Video Renderer, 0x00400000, 1, 0, quartz.dll, 6.06.7600.16385
Decoder, 0 x 00200000 VPS, 0, 0, WSTPager.ax, 6.06.7600.16385
Writer, 0x00400000, 0, 0, qasf.dll, WM ASF 12.00.7600.16385
Allocator, 0 x 00600000, 1, 1, vbisurf.ax, 6.01.7600.16385 Surface of VBI
File writer, 00200000 x 0, 1, 0, qcap.dll, 6.06.7600.16385
iTV Sink, 0 x 00600000, 1, 0, itvdata.dll, 6.06.7600.16385 data
iTV to Capture data filter 0 x 00600000, 1, 1, itvdata.dll, 6.06.7600.16385
DVD Navigator, 0 x 00200000, 0, 3, qdvd.dll, 6.06.7600.16385
Mixer2, 0 x 00200000, 1, 1, qdvd.dll, 6.06.7600.16385 overlay
AVI Draw, 0 x 00600064, 9, 1, quartz.dll, 6.06.7600.16385
RDP DShow Redirection Filter, 0xffffffff, 1, 0, DShowRdpFilter.dll,
Microsoft MPEG-2 Audio Encoder, 0 x 00200000, 1, 1, msmpeg2enc.dll, 6.01.7600.16385
Pager, 0 x 00200000, 1, 1, WSTPager.ax, 6.06.7600.16385 WST
MPEG2 demux, 0 x 00600000, 1, 1, mpg2splt.ax, 6.06.7600.16385
Decoder, 0 x 00800000, 1, 1, qdv.dll, 6.06.7600.16385 DV video
SampleGrabber, 0 x 00200000, 1, 1, qedit.dll, 6.06.7600.16385
Renderer, 00200000 x 0, 1, 0, qedit.dll, 6.06.7600.16385 null
Tables, 0x005fffff, 1, 0, mpeg2data.ax, 6.06.7600.16385 and MPEG - 2 Sections
Microsoft AC3 Encoder, 0 x 00200000, 1, 1, msac3enc.dll, 6.01.7600.16385
StreamBufferSource, 0 x 00200000, 0, 0, sbe.dll, 6.06.7600.16385
Smart Tee, 0 x 00200000, 1, 2, qcap.dll, 6.06.7600.16385
Mix, 0 x 00200000, 0, 0, qdvd.dll, 6.06.7600.16385 overlay
AVI Decompressor, 0 x 00600000, 1, 1, quartz.dll, 6.06.7600.16385
Source, 0 x 00400000, 0, 2, quartz.dll, 6.06.7600.16385 AVI/WAV file
Parser, 0 x 00400000, 1, 1, quartz.dll, 6.06.7600.16385 wave
Parser, 0 x 00400000, 1, 1, quartz.dll, 6.06.7600.16385 noon
Multi-fichier Parser, 0 x 00400000, 1, 1, quartz.dll, 6.06.7600.16385
File stream renderer, 0x00400000, 1, 1, quartz.dll, 6.06.7600.16385
Microsoft DTV - DVD Audio Decoder, 0x005fffff, 1, 1, msmpeg2adec.dll, 6.01.7140.0000
StreamBufferSink2, 0 x 00200000, 0, 0, sbe.dll, 6.06.7600.16385
AVI Mux, 00200000 x 0, 1, 0, qcap.dll, 6.06.7600.16385
Line 21 decoder 2, 0 x 00600002, 1, 1, quartz.dll, 6.06.7600.16385
File Source (Async.), 0 x 00400000, 0, 1, quartz.dll, 6.06.7600.16385
File Source (URL), 0 x 00400000, 0, 1, quartz.dll, 6.06.7600.16385
Infinite pin Tee Filter, 0 x 00200000, 1, 1, qcap.dll, 6.06.7600.16385
Renderer, 00200000 x 0, 1, 0, evr.dll, 6.01.7600.16385 improved video
BDA MPEG2 Transport Information Filter, 0 x 00200000, 2, 0, psisrndr.ax, 6.06.7600.16385
Decoder, 0 x 40000001, 1, 1, quartz.dll, 6.06.7600.16385 MPEG videoWDM Streaming Tee/Splitter devices:
Converter, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7600.16385 tee/sink - to the-wellsWDM Streaming encoder devices:
ViXS PureTV Encoder, 0 x 00200000, 2, 4, ksproxy.ax, 6.01.7600.16385WDM streaming data transformations:
ViXS Transcoder, 0 x 00200000, 2, 1, ksproxy.ax, 6.01.7600.16385Video compressors:
WMVideo8 encoder DMO, 0 x 00600800, 1, 1, wmvxencd.dll, 6.01.7600.16385
WMVideo9 encoder DMO, 0 x 00600800, 1, 1, wmvencod.dll, 6.01.7600.16385
Encoder 9 MSScreen DMO, 0 x 00600800, 1, 1, wmvsencd.dll, 6.01.7600.16385
Encode, 0 x 00200000, 0, 0, qdv.dll, 6.06.7600.16385 DV video
MJPEG Compressor, 0 x 00200000, 0, 0, quartz.dll, 6.06.7600.16385
Cinepak Codec by Radius, 0 x 00200000, 1, 1, qcap.dll, 6.06.7600.16385
Intel IYUV codec, 0 x 00200000, 1, 1, qcap.dll, 6.06.7600.16385
Intel IYUV codec, 0 x 00200000, 1, 1, qcap.dll, 6.06.7600.16385
Microsoft RLE, 0 x 00200000, 1, 1, qcap.dll, 6.06.7600.16385
Microsoft Video 1, 0 x 00200000, 1, 1, qcap.dll, 6.06.7600.16385Audio compressors:
WM Encoder DMO speech, 0 00600800, 1, 1, x WMSPDMOE. DLL, 6.01.7600.16385
WMAudio encoder DMO, 0 x 00600800, 1, 1, WMADMOE. DLL, 6.01.7600.16385
IMA ADPCM, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16385
PCM, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16385
Microsoft ADPCM, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16385
GSM 6.10, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16385
CCITT A - Law, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16385
CCITT u - Law, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16385
MPEG Layer-3, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16385Audio Capture sources:
ViXS PureTV Analog Audio Capture, 0 x 00200000, 0, 1, ksproxy.ax, 6.01.7600.16385PBDA CP filters:
PBDA DTFilter, 0 x 00600000, 1, 1, CPFilters.dll, 6.06.7600.16385
ETFilter, 0 x 00200000 PBDA, 0, 0, CPFilters.dll, 6.06.7600.16385
PTFilter, 0 x 00200000 PBDA, 0, 0, CPFilters.dll, 6.06.7600.16385Midi converters:
Default MidiOut Device, 0 x 00800000, 1, 0, quartz.dll, 6.06.7600.16385
Synth, 00200000 x 0, 1, 0, quartz.dll, 6.06.7600.16385 Microsoft GS WavetableWDM Streaming Capture devices:
0 x 00000000, 0, 0,
0 x 00000000, 0, 0,
0 x 00000000, 0, 0,
ViXS PureTV Capture, 0 x 00200000, 2, 5, ksproxy.ax, 6.01.7600.16385
ViXS PureTV analog video Capture, 0 00200000, 2, 2, x ksproxy.ax, 6.01.7600.16385WDM Streaming making devices:
Realtek HD Audio output, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7600.16385
Realtek HD Audio rear output, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7600.16385
HDA Realtek HDMI Out, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7600.16385
Realtek HDA SPDIF Out, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7600.16385BDA Source filters:
ViXS PureTV DVBC/ATSC Tuner, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7600.16385BDA network providers:
Provider, 0 x 00200000, 0, 1, MSDvbNP.ax, 6.06.7600.16385 Microsoft ATSC network
DVBC Microsoft Network Provider, 0 x 00200000, 0, 1, MSDvbNP.ax, 6.06.7600.16385
Provider, 0 x 00200000, 0, 1, MSDvbNP.ax, network 6.06.7600.16385 Microsoft DVBS
Provider, 0 x 00200000, 0, 1, MSDvbNP.ax, 6.06.7600.16385 network Microsoft t
Microsoft Network Provider, 0 x 00200000, 0, 1, MSNP.ax, 6.06.7600.16385WDM Streaming Multiplexer devices:
ViXS PureTV Encoder, 0 x 00200000, 2, 4, ksproxy.ax, 6.01.7600.16385Video Capture sources:
ViXS PureTV Capture, 0 x 00200000, 2, 5, ksproxy.ax, 6.01.7600.16385
ViXS PureTV analog video Capture, 0 00200000, 2, 2, x ksproxy.ax, 6.01.7600.16385Multiple instances Codecs VBI Capable:
The IST Codec, 0 x 00600000, 1, 4, VBICodec.ax, 6.06.7600.16385BDA Transport Information converters:
BDA MPEG2 Transport Information Filter 0 x 00600000, 2, 0, psisrndr.ax, 6.06.7600.16385
Tables, 0 x 00600000, 1, 0, mpeg2data.ax, 6.06.7600.16385 and MPEG - 2 SectionsWDM Streaming TV Tuners:
ViXS PureTV analog TV Tuner, 0 x 00200000, 0, 2, kstvtune.ax, 6.01.7600.16385WDM Streaming crossbars:
ViXS PureTV Crossbar, 0 x 00200000, 5, 2, ksxbar.ax, 6.01.7600.16385WDM TV Audio streaming:
ViXS PureTV TV Audio, 0 x 00200000, 1, 1, ksxbar.ax, 6.01.7600.16385CP/CA BDA filters:
Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7600.16385
Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7600.16385
PTFilter, 0 x 00200000, 0, 0, EncDec.dll, 6.06.7600.16385
XDS Codec, 0 x 00200000, 0, 0, EncDec.dll, 6.06.7600.16385WDM Streaming transformations of the Communication:
Converter, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7600.16385 tee/sink - to the-wellsAudio converters:
Speakers (Realtek High Definiti, 00200000 x 0, 1, 0, quartz.dll, 6.06.7600.16385)
DirectSound Device, 0 x 00800000, 1, 0, quartz.dll, default 6.06.7600.16385
Default WaveOut Device, 0 x 00200000, 1, 0, quartz.dll, 6.06.7600.16385
DirectSound: Realtek Digital Output (Realtek High definition Audio), 0 x 00200000, 1, 0, quartz.dll, 6.06.7600.16385
DirectSound: Realtek HDMI Output (Realtek High definition Audio), 0 x 00200000, 1, 0, quartz.dll, 6.06.7600.16385
DirectSound: Speakers (Realtek High definition Audio), 0 x 00200000, 1, 0, quartz.dll, 6.06.7600.16385
Realtek Digital Output (Realtek, 00200000 x 0, 1, 0, quartz.dll, 6.06.7600.16385)
Realtek HDMI Output (Realtek Hi, 00200000 x 0, 1, 0, quartz.dll, 6.06.7600.16385)BDA receiver components:
ViXS PureTV Digital TV Receiver, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7600.16385---------------
EVR power information
---------------
Current value: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (quality)
Quality indicators: 2576
Activated:
Limitation of the force
That allow half deinterlace
Allow the scaling
Decode power usage: 100
Balanced flags: 1424
Activated:
Limitation of the force
Allow batch processing
Force half deinterlace
Force the scaling
Decode power usage: 50
PowerFlags: 1424
Activated:
Limitation of the force
Allow batch processing
Force half deinterlace
Force the scaling
Decode power usage: 0Check to see if the same thing happens to the boot minimum selective startup
Also disable or uninstall the security software and check.
-
WAP371 connection drops after 24 hours
I recently started to test a WAP371 with the work of firmware 1.0.1.5 of a to POE injector. I'm having a problem with a Sony Vaio laptop that uses a double Strip map 7620N Intel that seems to work correctly 24 hours then starts to lose connection every few minutes.
The access point is configured to use a RADIUS server works on Windows Server 2008 SP2 (Small Business Server to be exact).
The journal of the WAP371 begins to show the following message:
STA deauthed reason BSSID 1: unspecified reason
I tried a few different drives for the Vaio. We also have a WAP321 on a different floor that do not exhibit the same problem.
Everyone knows about similar problems?
I thank you for your patience and gives us a second chance. I thought about this case when I heard that they had released the new firmware and I was wondering if you were aware.
If you don't mind please mark this thread as a response while others can know that your issue has been resolved.
Eric Moyers
.:|:.:|:. CISCO | Cisco technical support | Wireless and monitoring subject matter Expert -
Unable to phase 1 estabislt of site to site VPN
Hi Experts,
Site-B(router)---Modem---Internet---Site-A(router)
I am trying to create a VPN Site-to-stie Ipsec between cisco2900 & cisco 861 and here is the scenario. Please find attached file connectivity diagram.
The issue is there is a modem provided by the ISP on Site-B and 861 cisco router is connected to that modem and the connection is given through RJ11 and there is no available on Site-B router ADSL port.
Based on the above mentioned scenario here is the config
Site b: -.
crypto ISAKMP policy 1
BA 3des
md5 hash
preshared authentication
Group 2ISAKMP crypto key CITDENjan2014 address 80.227.xx.xx
Crypto ipsec transform-set ETH-Dxb-esp-3des esp-md5-hmac
tunnel modecrypto map 1 VPN ipsec-isakmp
the value of 80.227.xx.xx peer
game of transformation-ETH-to-Dxb
match address 110FA 4 interface
IP 192.168.1.254 255.255.255.0
VPN crypto cardIP route 0.0.0.0 0.0.0.0 192.168.1.1
IP access-list ext 110
ip permit 192.168.1.0 0.0.0.255 192.168.10.0 0.0.0.255Screenshots of good will find ADSL modem for the information below
Double configuration on the LAN interface of the ADSL modem with ip address
I did port forwarding on the modem, although I did not port forwarding before I'm not sure whether it is correct or not.
Site-one router Config: -.
crypto ISAKMP policy 1
BA 3des
md5 hash
preshared authentication
Group 2ISAKMP crypto key CITDENjan2014 address 197.156.xx.xx
Crypto ipsec transform-set Dxb ETH esp-3des esp-md5-hmac
tunnel modemap-Dxb-Nigeria 20 ipsec-isakmp crypto
the value of 197.156.xx.xx peer
game of transformation-Dxb-to-ETH
match address 120interface GigabitEthernet0/1
IP address 80.227.xx.xx 255.255.255.252
card crypto Dxb-to-NigeriaIP route 0.0.0.0 0.0.0.0 GigabitEthernet0/1
access-list 120 permit ip 192.168.10.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 101 deny ip 192.168.10.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 101 permit ip 192.168.10.0 0.0.0.255 anyIP nat inside source map route SDM_RMAP_1 interface GigabitEthernet0/1 overload
allowed SDM_RMAP_1 1 route map
corresponds to the IP 101Connects to router B-Site: -.
* 13:02:06.735 Apr 16: ISAKMP (0): packet received 80.227.xx.xx dport 500 sport 1 Global (N) SA NEWS
* 13:02:06.735 Apr 16: ISAKMP: created a struct peer 80.227.xx.xx, peer port 1
* 13:02:06.735 Apr 16: ISAKMP: new position created post = 0x886B0310 peer_handle = 0x8000001D
* 13:02:06.735 Apr 16: ISAKMP: lock struct 0x886B0310, refcount 1 to peer crypto_isakmp_process_block
* 13:02:06.735 Apr 16: ISAKMP: 500 local port, remote port 1
* 13:02:06.735 Apr 16: ISAKMP: find a dup her to the tree during the isadb_insert his 88776 A 88 = call BVA
* 13:02:06.735 Apr 16: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
* 13:02:06.735 Apr 16: ISAKMP: (0): former State = new State IKE_READY = IKE_R_MM1* 16 Apr 13:02:06.735: ISAKMP: (0): treatment ITS payload. Message ID = 0
* 16 Apr 13:02:06.735: ISAKMP: (0): load useful vendor id of treatment
* 16 Apr 13:02:06.735: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
* 13:02:06.735 Apr 16: ISAKMP (0): provider ID is NAT - T RFC 3947
* Apr 16
ETH - CIT # 13:02:06.735: ISAKMP: (0): load useful vendor id of treatment
* 16 Apr 13:02:06.735: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 245
* 13:02:06.739 Apr 16: ISAKMP (0): provider ID is NAT - T v7
* 16 Apr 13:02:06.739: ISAKMP: (0): load useful vendor id of treatment
* 16 Apr 13:02:06.739: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 157
* 16 Apr 13:02:06.739: ISAKMP: (0): provider ID is NAT - T v3
* 16 Apr 13:02:06.739: ISAKMP: (0): load useful vendor id of treatment
* 16 Apr 13:02:06.739: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
* 16 Apr 13:02:06.739: ISAKMP: (0): provider ID is NAT - T v2
* 13:02:06.739 Apr 16: ISAKMP: (0): pair found pre-shared key matching 80.227.xx.xx
* 16 Apr 13:02:06.739: ISAKMP: (0): pre-shared key local found
* 13:02:06.739 Apr 16: ISAKMP: analysis of the profiles for xauth...
* 13:02:06.739 Apr 16: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 1
* 13:02:06.739 Apr 16: ISAKMP: 3DES-CBC encryption
* 13:02:06.739 Apr 16: ISAKMP: MD5 hash
* 13:02:06.739 Apr 16: ISAKMP: group by default 2
* 13:02:06.739 Apr 16: ISAKMP: pre-shared key auth
* 13:02:06.739 Apr 16: ISAKMP: type of life in seconds
* 13:02:06.739 Apr 16: ISAKMP: life (IPV) 0 x 0 0 x 1 0 x 51 0x80
* 13:02:06.739 Apr 16: ISAKMP: (0): atts are acceptable. Next payload is 0
* 13:02:06.739 Apr 16: ISAKMP: (0): Acceptable atts: real life: 0
* 13:02:06.739 Apr 16: ISAKMP: (0): Acceptable atts:life: 0
* 13:02:06.739 Apr 16: ISAKMP: (0): fill atts in his vpi_length:4
* 13:02:06.739 Apr 16: ISAKMP: (0): fill atts in his life_in_seconds:86400
* 13:02:06.739 Apr 16: ISAKMP: (0): return real life: 86400
* 13:02:06.739 Apr 16: ISAKMP: (0): timer life Started: 86400.* 16 Apr 13:02:06.739: ISAKMP: (0): load useful vendor id of treatment
* 16 Apr 13:02:06.739: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
* 13:02:06.739 Apr 16: ISAKMP (0): provider ID is NAT - T RFC 3947
* 16 Apr 13:02:06.739: ISAKMP: (0): load useful vendor id of treatment
* 16 Apr 13:02:06.739: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 245
* 13:02:06.739 Apr 16: ISAKMP (0): provider ID is NAT - T v7
* 16 Apr 13:02:06.739: ISAKMP: (0): load useful vendor id of treatment
* 16 Apr 13:02:06.739: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 157
* 16 Apr 13:02:06.739: ISAKMP: (0): provider ID is NAT - T v3
* 16 Apr 13:02:06.739: ISAKMP: (0): load useful vendor id of treatment
* 16 Apr 13:02:06.739: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
* 16 Apr 13:02:06.739: ISAKMP: (0): provider ID is NAT - T v2
* 13:02:06.739 Apr 16: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
* 13:02:06.739 Apr 16: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM1* 16 Apr 13:02:06.739: ISAKMP: (0): built of NAT - T of the seller-rfc3947 ID
* 16 Apr 13:02:06.739: ISAKMP: (0): 80.227.xx.xx my_port 500 peer_port 1 (R) package is sent MM_SA_SETUP
* 13:02:06.739 Apr 16: ISAKMP: (0): sending a packet IPv4 IKE.
* 13:02:06.739 Apr 16: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
* 13:02:06.739 Apr 16: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM2* 13:02:06.995 Apr 16: ISAKMP (0): packet received 80.227.xx.xx dport 500 sport 1 Global (R) MM_SA_SETUP
* 13:02:06.995 Apr 16: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
* 13:02:06.999 Apr 16: ISAKMP: (0): former State = new State IKE_R_MM2 = IKE_R_MM3* 16 Apr 13:02:06.999: ISAKMP: (0): processing KE payload. Message ID = 0
* 16 Apr 13:02:07.027: ISAKMP: (0): processing NONCE payload. Message ID = 0
* 13:02:07.027 Apr 16: ISAKMP: (0): pair found pre-shared key matching 80.227.xx.xx
* 16 Apr 13:02:07.027: ISAKMP: (2028): load useful vendor id of treatment
* 16 Apr 13:02:07.027: ISAKMP: (2028): provider ID is DPD
* 16 Apr 13:02:07.027: ISAKMP: (2028): load useful vendor id of treatment
* 16 Apr 13:02:07.027: ISAKMP: (2028): addressing another box of IOS!
* 16 Apr 13:02:07.027: ISAKMP: (2028): load useful vendor id of treatment
* 16 Apr 13:02:07.027: ISAKMP: (2028): provider ID seems the unit/DPD but major incompatibility of 241
* 16 Apr 13:02:07.027: ISAKMP: (2028): provider ID is XAUTH
* 13:02:07.027 Apr 16: ISAKMP: receives the payload type 20
* 13:02:07.027 Apr 16: ISAKMP (2028): NAT found, both nodes inside the NAT
* 13:02:07.027 Apr 16: ISAKMP: receives the payload type 20
* 13:02:07.027 Apr 16: ISAKMP (2028): NAT found, both nodes inside the NAT
* 13:02:07.027 Apr 16: ISAKMP: (2028): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
* 13:02:07.027 Apr 16: ISAKMP: (2028): former State = new State IKE_R_MM3 = IKE_R_MM3* 16 Apr 13:02:07.027: ISAKMP: (2028): 80.227.xx.xx my_port 500 peer_port 1 (R) package is sent MM_KEY_EXCH
* 13:02:07.027 Apr 16: ISAKMP: (2028): sending a packet IPv4 IKE.
* 13:02:07.027 Apr 16: ISAKMP: (2028): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
* 13:02:07.027 Apr 16: ISAKMP: (2028): former State = new State IKE_R_MM3 = IKE_R_MM4ETH - CIT #.
ETH - CIT #.
* 16 Apr 13:02:17.027: ISAKMP: (2028): transmit phase 1 MM_KEY_EXCH...
* 13:02:17.027 Apr 16: ISAKMP (2028): increment the count of errors on his, try 1 5: retransmit the phase 1
* 16 Apr 13:02:17.027: ISAKMP: (2028): transmit phase 1 MM_KEY_EXCH
* 16 Apr 13:02:17.027: ISAKMP: (2028): 80.227.xx.xx my_port 500 peer_port 1 (R) package is sent MM_KEY_EXCH
* 13:02:17.027 Apr 16: ISAKMP: (2028): sending a packet IPv4 IKE.Connects to the router Site-one: -.
* 13:15:28.109 Apr 16: ISAKMP (1263): packet received dport 500 sport Global 500 (I) MM_KEY_EXCH 197.156.xx.xx
* 16 Apr 13:15:28.109: ISAKMP: (1263): package of phase 1 is a duplicate of a previous package.
* 16 Apr 13:15:28.109: ISAKMP: (1263): retransmission due to phase 1 of retransmission
* 16 Apr 13:15:28.609: ISAKMP: (1263): transmit phase 1 MM_KEY_EXCH...
* 13:15:28.609 Apr 16: ISAKMP (1263): increment the count of errors on his, try 4 out 5: retransmit the phase 1
* 16 Apr 13:15:28.609: ISAKMP: (1263): transmit phase 1 MM_KEY_EXCH
* 16 Apr 13:15:28.609: ISAKMP: (1263): package 197.156.xx.xx my_port 4500 peer_port 4500 (I) sending MM_KEY_EXCH
* 13:15:28.609 Apr 16: ISAKMP: (1263): sending a packet IPv4 IKE.
DXB - CIT #.
* 13:15:38.109 Apr 16: ISAKMP (1263): packet received dport 500 sport Global 500 (I) MM_KEY_EXCH 197.156.xx.xx
* 16 Apr 13:15:38.109: ISAKMP: (1263): package of phase 1 is a duplicate of a previous package.
* 16 Apr 13:15:38.109: ISAKMP: (1263): retransmission due to phase 1 of retransmission
* 16 Apr 13:15:38.609: ISAKMP: (1263): transmit phase 1 MM_KEY_EXCH...
* 13:15:38.609 Apr 16: ISAKMP (1263): increment the count of errors on his, try 5 of 5: retransmit the phase 1
* 16 Apr 13:15:38.609: ISAKMP: (1263): transmit phase 1 MM_KEY_EXCH
* 16 Apr 13:15:38.609: ISAKMP: (1263): package 197.156.xx.xx my_port 4500 peer_port 4500 (I) sending MM_KEY_EXCH
* 13:15:38.609 Apr 16: ISAKMP: (1263): sending a packet IPv4 IKE.
DXB - CIT #.
* 13:15:47.593 Apr 16: ISAKMP: set new node 0 to QM_IDLE
* 13:15:47.593 Apr 16: ISAKMP: (1263): SA is still budding. Attached new request ipsec. (local 80.227.xx.xx, remote 197.156.xx.xx)
* 13:15:47.593 Apr 16: ISAKMP: error during the processing of HIS application: failed to initialize SA
* 13:15:47.593 Apr 16: ISAKMP: error while processing message KMI 0, error 2.
* 16 Apr 13:15:48.609: ISAKMP: (1263): transmit phase 1 MM_KEY_EXCH...
* 13:15:48.609 Apr 16: ISAKMP: (1263): peer does not paranoid KeepAlive.* 13:15:48.609 Apr 16: ISAKMP: (1263): removal of reason ITS status of 'Death by retransmission P1' (I) MM_KEY_EXCH (197.156.xx.xx peer)
* 13:15:48.609 Apr 16: ISAKMP: (1263): removal of reason ITS status of 'Death by retransmission P1' (I) MM_KEY_EXCH (197.156.xx.xx peer)
* 13:15:48.609 Apr 16: ISAKMP: Unlocking counterpart struct 0x23193AD4 for isadb_mark_sa_deleted(), count 0
* 13:15:48.609 Apr 16: ISAKMP: delete peer node by peer_reap for 197.156.xx.xx: 23193AD4
DXB - CIT #.
DXB - CIT #.
* 13:15:48.609 Apr 16: ISAKMP: (1263): error suppression node 1134682361 FALSE reason 'IKE deleted.
* 13:15:48.609 Apr 16: ISAKMP: (1263): error suppression node 680913363 FALSE reason 'IKE deleted.
* 13:15:48.609 Apr 16: ISAKMP: (1263): error suppression node 1740991762 FALSE reason 'IKE deleted.
* 13:15:48.609 Apr 16: ISAKMP: (1263): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
* 13:15:48.609 Apr 16: ISAKMP: (1263): former State = new State IKE_I_MM5 = IKE_DEST_SADXB - CIT #.
DXB - CIT #shoc cry
DXB - CIT #sho isa scream his
IPv4 Crypto ISAKMP Security Association
DST CBC conn-State id
197.156.XX.XX 80.227.xx.xx MM_NO_STATE 1263 ACTIVE (deleted)IPv6 Crypto ISAKMP Security Association
* 16 Apr 13:16:17.593: IPSEC (key_engine): request timer shot: count = 2,.
local (identity) = 80.227.xx.xx:0, distance = 197.156.xx.xx:0,
local_proxy = 192.168.10.0/255.255.255.0/256/0,
remote_proxy = 192.168.1.0/255.255.255.0/256/0
* 16 Apr 13:16:17.609: IPSEC (sa_request):,.
(Eng. msg key.) Local OUTGOING = 80.227.xx.xx:500, distance = 197.156.xx.xx:500,
local_proxy = 192.168.10.0/255.255.255.0/256/0,
remote_proxy = 192.168.1.0/255.255.255.0/256/0,
Protocol = ESP, transform = esp-3des esp-md5-hmac (Tunnel),
lifedur = 3600 s and KB 4608000,
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 0
* 16 Apr 13:16:17.609: ISAKMP: (0): profile of THE request is (NULL)
* 13:16:17.609 Apr 16: ISAKMP: created a struct peer 197.156.xx.xx, peer port 500
* 13:16:17.609 Apr 16: ISAKMP: new created position = 0x23193AD4 peer_handle = 0 x 80001862
* 13:16:17.609 Apr 16: ISAKMP: lock struct 0x23193AD4, refcount 1 to peer isakmp_initiator
* 13:16:17.609 Apr 16: ISAKMP: 500 local port, remote port 500
* 13:16:17.609 Apr 16: ISAKMP: set new node 0 to QM_IDLE
* 13:16:17.609 Apr 16: ISAKMP: find a dup her to the tree during the isadb_insert his 270A2FD0 = call BVA
* 13:16:17.609 Apr 16: ISAKMP: (0): cannot start aggressive mode, try the main mode.
* 13:16:17.609 Apr 16: ISAKMP: (0): pair found pre-shared key matching 197.156.xx.xx
* 16 Apr 13:16:17.609: ISAKMP: (0): built of NAT - T of the seller-rfc3947 ID
* 16 Apr 13:16:17.609: ISAKMP: (0): built the seller-07 ID NAT - t
* 16 Apr 13:16:17.609: ISAKMP: (0): built of NAT - T of the seller-03 ID
* 16 Apr 13:16:17.609: ISAKMP: (0): built the seller-02 ID NAT - t
* 13:16:17.609 Apr 16: ISAKMP: (0): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
* 13:16:17.609 Apr 16: ISAKMP: (0): former State = new State IKE_READY = IKE_I_MM1* 16 Apr 13:16:17.609: ISAKMP: (0): Beginner Main Mode Exchange
* 16 Apr 13:16:17.609: ISAKMP: (0): package 197.156.xx.xx my_port 500 peer_port 500 (I) sending MM_NO_STATE
* 13:16:17.609 Apr 16: ISAKMP: (0): sending a packet IPv4 IKE.
* 13:16:17.865 Apr 16: ISAKMP (0): packet received dport 500 sport Global 500 (I) MM_NO_STATE 197.156.xx.xx
* 13:16:17.865 Apr 16: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
* 13:16:17.865 Apr 16: ISAKMP: (0): former State = new State IKE_I_MM1 = IKE_I_MM2* 16 Apr 13:16:17.865: ISAKMP: (0): treatment ITS payload. Message ID = 0
* 16 Apr 13:16:17.869: ISAKMP: (0): load useful vendor id of treatment
* 16 Apr 13:16:17.869: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
* 13:16:17.869 Apr 16: ISAKMP (0): provider ID is NAT - T RFC 3947
* 13:16:17.869 Apr 16: ISAKMP: (0): pair found pre-shared key matching 197.156.xx.xx
* 16 Apr 13:16:17.869: ISAKMP: (0): pre-shared key local found
* 13:16:17.869 Apr 16: ISAKMP: analysis of the profiles for xauth... ciscocp-ike-profile-1
* 16 Apr 13:16:17.869: ISAKMP: (0): pre-shared xauth authentication
* 13:16:17.869 Apr 16: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 1
* 13:16:17.869 Apr 16: ISAKMP: 3DES-CBC encryption
* 13:16:17.869 Apr 16: ISAKMP: MD5 hash
* 13:16:17.869 Apr 16: ISAKMP: group by default 2
* 13:16:17.869 Apr 16: ISAKMP: pre-shared key auth
* 13:16:17.869 Apr 16: ISAKMP: type of life in seconds
* 13:16:17.869 Apr 16: ISAKMP: life (IPV) 0 x 0 0 x 1 0 x 51 0x80
* 13:16:17.869 Apr 16: ISAKMP: (0): atts are acceptable. Next payload is 0
* 13:16:17.869 Apr 16: ISAKMP: (0): Acceptable atts: real life: 0
* 13:16:17.869 Apr 16: ISAKMP: (0): Acceptable atts:life: 0
* 13:16:17.869 Apr 16: ISAKMP: (0): fill atts in his vpi_length:4
* 13:16:17.869 Apr 16: ISAKMP: (0): fill atts in his life_in_seconds:86400
* 13:16:17.869 Apr 16: ISAKMP: (0): return real life: 86400
* 13:16:17.869 Apr 16: ISAKMP: (0): timer life Started: 86400.* 16 Apr 13:16:17.869: ISAKMP: (0): load useful vendor id of treatment
* 16 Apr 13:16:17.869: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
* 13:16:17.869 Apr 16: ISAKMP (0): provider ID is NAT - T RFC 3947
* 13:16:17.869 Apr 16: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
* 13:16:17.869 Apr 16: ISAKMP: (0): former State = new State IKE_I_MM2 = IKE_I_MM2* 16 Apr 13:16:17.869: ISAKMP: (0): package 197.156.xx.xx my_port 500 peer_port 500 (I) sending MM_SA_SETUP
* 13:16:17.869 Apr 16: ISAKMP: (0): sending a packet IPv4 IKE.
* 13:16:17.869 Apr 16: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
* 13:16:17.869 Apr 16: ISAKMP: (0): former State = new State IKE_I_MM2 = IKE_I_MM3* 13:16:18.157 Apr 16: ISAKMP (0): packet received dport 500 sport Global 500 (I) MM_SA_SETUP 197.156.xx.xx
* 13:16:18.157 Apr 16: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
* 13:16:18.157 Apr 16: ISAKMP: (0): former State = new State IKE_I_MM3 = IKE_I_MM4* 16 Apr 13:16:18.157: ISAKMP: (0): processing KE payload. Message ID = 0
* 16 Apr 13:16:18.181: ISAKMP: (0): processing NONCE payload. Message ID = 0
* 13:16:18.181 Apr 16: ISAKMP: (0): pair found pre-shared key matching 197.156.xx.xx
* 16 Apr 13:16:18.181: ISAKMP: (1264): load useful vendor id of treatment
* 16 Apr 13:16:18.181: ISAKMP: (1264): provider ID is the unit
* 16 Apr 13:16:18.181: ISAKMP: (1264): load useful vendor id of treatment
* 16 Apr 13:16:18.181: ISAKMP: (1264): provider ID is DPD
* 16 Apr 13:16:18.181: ISAKMP: (1264): load useful vendor id of treatment
* 16 Apr 13:16:18.185: ISAKMP: (1264): addressing another box of IOS!
* 13:16:18.185 Apr 16: ISAKMP: receives the payload type 20
* 13:16:18.185 Apr 16: ISAKMP (1264): NAT found, both nodes inside the NAT
* 13:16:18.185 Apr 16: ISAKMP: receives the payload type 20
* 13:16:18.185 Apr 16: ISAKMP (1264): NAT found, both nodes inside the NAT
* 13:16:18.185 Apr 16: ISAKMP: (1264): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
* 13:16:18.185 Apr 16: ISAKMP: (1264): former State = new State IKE_I_MM4 = IKE_I_MM4* 13:16:18.185 Apr 16: ISAKMP: (1264): send initial contact
* 13:16:18.185 Apr 16: ISAKMP: (1264): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
* 13:16:18.185 Apr 16: ISAKMP (1264): payload ID
next payload: 8
type: 1
address: 80.227.xx.xx
Protocol: 17
Port: 0
Length: 12
* 13:16:18.185 Apr 16: ISAKMP: (1264): the total payload length: 12
* 16 Apr 13:16:18.185: ISAKMP: (1264): package 197.156.xx.xx my_port 4500 peer_port 4500 (I) sending MM_KEY_EXCH
* 13:16:18.185 Apr 16: ISAKMP: (1264): sending a packet IPv4 IKE.
* 13:16:18.185 Apr 16: ISAKMP: (1264): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
* 13:16:18.185 Apr 16: ISAKMP: (1264): former State = new State IKE_I_MM4 = IKE_I_MM5DXB - CIT #.
* 13:16:28.157 Apr 16: ISAKMP (1264): packet received dport 500 sport Global 500 (I) MM_KEY_EXCH 197.156.xx.xx
* 16 Apr 13:16:28.157: ISAKMP: (1264): package of phase 1 is a duplicate of a previous package.
* 16 Apr 13:16:28.157: ISAKMP: (1264): retransmission due to phase 1 of retransmission
* 16 Apr 13:16:28.657: ISAKMP: (1264): transmit phase 1 MM_KEY_EXCH...
* 13:16:28.657 Apr 16: ISAKMP (1264): increment the count of errors on his, try 1 5: retransmit the phase 1
* 16 Apr 13:16:28.657: ISAKMP: (1264): transmit phase 1 MM_KEY_EXCH
* 16 Apr 13:16:28.657: ISAKMP: (1264): package 197.156.xx.xx my_port 4500 peer_port 4500 (I) sending MM_KEY_EXCH
DXB - CIT #.
* 13:16:28.657 Apr 16: ISAKMP: (1264): sending a packet IPv4 IKE.
DXB - CIT #.
DXB - CIT #.
DXB - CIT #.
DXB - CIT #.
DXB - CIT #.
DXB - CIT #.
DXB - CIT #u all
All possible debugging has been disabled
DXB - CIT #.
DXB - CIT #.
* 13:16:38.157 Apr 16: ISAKMP (1264): packet received dport 500 sport Global 500 (I) MM_KEY_EXCH 197.156.xx.xx
* 16 Apr 13:16:38.157: ISAKMP: (1264): package of phase 1 is a duplicate of a previous package.
* 16 Apr 13:16:38.157: ISAKMP: (1264): retransmission due to phase 1 of retransmission
* 13:16:38.609 Apr 16: ISAKMP: (1263): purge the node 1134682361
* 13:16:38.609 Apr 16: ISAKMP: (1263): purge the node 680913363
* 13:16:38.609 Apr 16: ISAKMP: (1263): purge the node 1740991762
* 16 Apr 13:16:38.657: ISAKMP: (1264): transmit phase 1 MM_KEY_EXCH...
* 13:16:38.657 Apr 16: ISAKMP (1264): increment the count of errors on his, try 2 of 5: retransmit the phase 1
DXB - CIT #.
DXB - CIT #.
DXB - CIT #.
DXB - CIT #.
* 16 Apr 13:16:38.657: ISAKMP: (1264): transmit phase 1 MM_KEY_EXCH
* 16 Apr 13:16:38.657: ISAKMP: (1264): package 197.156.xx.xx my_port 4500 peer_port 4500 (I) sending MM_KEY_EXCH
* 13:16:38.657 Apr 16: ISAKMP: (1264): sending a packet IPv4 IKE.Hello
your configuration looks correct. I was wondering that nat work very well, because I do not see ip nat inside and ip nat outside configured on A router.
Please chceck whether ESP (50) is permitted (probably VPN passthrough) modem and also try to allow UDP 4500 (IPSEC NAT - T).
Best regards
Jan
-
I try to open port 21 on the router 831 for access to the FTP server. I added the two lines of fllowing.
access-list 10 permit 171.16.5.2
list of port 21 ftp port-map IP 10
But can telnet it. When the double configuration controls, I don't have 'list ip port-map ftp port 21 10' line. I added it again without error, but the line is not displayed. Here is the configuration. Any suggestions?
version 12.3
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime show-timezone msec
Log service timestamps datetime localtime show-timezone msec
encryption password service
sequence numbers service
!
hostname ciscodmz
!
Security of authentication failure rate 3 log
Passwords security min-length 6
logging buffered debugging 51200
recording console critical
enable secret 5 $1$ o0ko$ hXk18FTwq076pCcnKY0LY1
!
username privilege 15 password 7 ciscodmz 00071A1507545A545C
America/Regina-6 timezone clock
No aaa new-model
IP subnet zero
no ip source route
synwait-time of tcp IP 10
IP domain name cisco.com
IP-server names 4.2.2.1
DHCP excluded-address IP 172.16.5.1 172.16.5.5
!
IP dhcp pool sdm-pool1
network 172.16.5.0 255.255.255.0
router by default - 172.16.5.1
!
!
no ip bootp Server
IP cef
audit of IP notify Journal
Max-events of po verification IP 100
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
No ftp server enable write
!
!
!
!
!
!
!
interface Ethernet0
Description FW_INSIDE, ETH - LAN$ $$
172.16.5.1 IP address 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
route IP cache flow
No cdp enable
!
interface Ethernet1
Description $FW_OUTSIDE$ $$ of ETH - WAN
IP 68.17.43.208 255.255.255.224
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
route IP cache flow
automatic duplex
No cdp enable
!
interface FastEthernet1
no ip address
automatic duplex
automatic speed
!
interface FastEthernet2
no ip address
automatic duplex
automatic speed
!
interface FastEthernet3
no ip address
automatic duplex
automatic speed
!
interface FastEthernet4
no ip address
automatic duplex
automatic speed
!
the IP nat inside source 1 interface Ethernet1 overload list
IP classless
IP route 0.0.0.0 0.0.0.0 68.17.43.193 permanent
IP http server
local IP http authentication
IP http secure server
!
recording of debug trap
record 172.16.5.1
access-list 1 permit 172.16.5.0 0.0.0.255
access-list 10 permit 172.16.5.2
not run cdp
allowed SDM_RMAP_1 1 route map
corresponds to the IP 120
!
connection of the banner ^ CCCAuthorized access only!
Unplug IMMEDIATELY if you are not an authorized user. ^ C
!
Line con 0
local connection
no activation of the modem
telnet output transport
line to 0
local connection
telnet output transport
line vty 0 4
privilege level 15
local connection
!
max-task-time 5000 Planner
Scheduler interval 500
!
end
ciscodmz #.
Yes if this is what you want to do and then the term you used and the command you used (ip port-card) are not correct.
If you want that the FTP entering the router to a public IP address to pass to a private IP address of the router, so I think that a static NAT translation would be the solution you need.
HTH
Rick
Maybe you are looking for
-
What is the compatible adapter for the HDR - CX 220?
I want to buy a power adapter for the my Camcorder HDR-CX220. I thought I bought the right compatible adapter AC-L200, but it doesn't work? Have I the right adapter and received a defective charger or I have the wrong adapter for my camcorder? Thank
-
What is the best format to select then copy music from a cd to itunes
I copy my cd collection into iTunes. What is the best format that should be selected for the best quality of music? Thank you.
-
HP printer to one pc to another
Windows 8 (p6 233o PC) I had Windows 8, that my wife uses. So I bought another. I had an another windows 8 for myseft. It is a printer (Hp Officejet 4500 G510n-z). I would like to know how I can put this printer on my pc. What do I need to do.
-
It was produced for about 1 month without no reason that I can find.
-
Please help my blackberry Z10 goes out frequently and only turns on if his charger on and with that being said, I discovered the battery to be always above average level... Please help I dunno what to do now and I bought it on sale at the shop of the