Double screen problems

Currently, I have a Samsung SyncMaster943NW computer screen as my main screen and have also to connect the computer to my Samsung series 6 TV via an HDMI cable. My computer has rail mode dual display NVIDIA GeForce 8200. When implementing both screen show the same image and work properly as desired, however whenever the computer is turned off and rebooted time black screen appear and the computer is unusable until the secondary monitor is unplugged and restarted the computer. No one knows why this is happening and how it can be corrected please advide thanks

Hello

·         By secondary monitor are you referring to the HDMI connection?

Have you tried upgrading to the latest version of the NVIDIA drivers?

I suggest you to update to the latest graphics card NVidia drivers and see if the problem is resolved.

http://www.nvidia.com/page/home.html

How to manage devices in Windows XP

http://support.Microsoft.com/kb/283658

I suggest you upgrade to Windows Vista or Windows 7, because these operating systems have better support for dual monitors.

http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

Tags: Windows

Similar Questions

  • View performance 5.1 with double screen problems.

    Hardware version 8 esxi 5.0.0 updated 1 and vmware agent and his client to version 5.1 with a monitor everything is fine, but with 2 keyboard lock sporadically and performance for video is incompatible with some severe lag spikes.   If we remove the second monitor, its all back to normal.      It's linked clones and win7 desktop computers.

    If you can, try with a v7 hw machine, saw some problems that could to point to beeing v8 hw problem reported.

    In any case, you should contact VMware support and report it to so we can fix it if it's a bug.

    Linjo

  • Tecra M3 - screen problem double

    I have a Tecra M3 with the NVidia drivers installed (using those newer section pilots) and when I activate the option double screen he sets the screen of the laptop as the main screen and opens to all applications on the main screen. I can't change the primary but I put the windows task bar to the second screen, but applications seem to open on the main screen always and even when you move to the second screen, that they should remember where they were last open but they do not seem to. On my old Tecra S1 with ATI, the detected laptop external monitor drivers and the set as primary and then opened the Tools toolbar and on the correct screen applications.

    Does anyone know how to get the screens work properly.

    Barrie.

    Hello

    I have Tecra S3 and I tested it today and I am very surprised how many opportunities are there to use the device and an external monitor.

    I put t know if you're using Replicator port, but in my case, I put external monitor as primary and portable display as windows extended desktop.

    I have connected monitor to my Tecra (without Port Replicator)
    Using the key combination FN + F5 chose the external display only
    Go to display properties and choose display 2 and activate the option windows extended desktop

    Every time if the device starts the beginning and the newspaper in the window will be displayed on the external screen. I hope that's what you want, or maybe that I n t you understood right.

    Good bye

  • Problem with 5.2 and computer ThinClient view double screen

    Hello

    When I try to use the double screen with Windows 7, PCoIP Protocol and a computer ThinClient Fiju FUTRO S900 (3.8.0) it doesn't.

    The office is just mirrored between the two screen but it is impossible to extend the desktop. I can't change the display settings in Windows and as much as I know there is no GPO that prevent to do.

    When I connect to this virtual machine with View Windows Client it works.

    Any help?

    Thanks in advance.

    OI!

    I found the solution.

    Setting the screen must be configurerd on the display of the computer ThinClient S900 preference.

  • Cannot select a native resolution when double screening

    Hello
    Here are the basics. Laptop is a HP Pavilion DV2480se running Vista Home premium 64-bit w / SP2. I have a Samsung Syncmaster 2243 NW LCD screen attached via a VGA cable.

    Since I got the screen (4 months) I was able to double screen with the laptop screen running at its default value of 1280 by 800 pixels and LCD 1680 x 1050 screen (it is wanted to display resolution) by adjusting the parameters via the display settings and/or the NVIDIA Control Panel. I do always disconnect the LCD screen of the portable computer and reconnect without problem. Today, if I plugged it upward and the screen LCD looked funny and when I went to set the resolution in the display settings I can not select 1680 x 1050, nor in the NVIDIA Control Panel. I tried to unplug and reconnect the cable, restart, reinstall the driver, allowing the extra modes on the monitor etc and nothing allows me to get the mode 1680 x 1050.

    I tried to connect to another screen but have the same problem with it.

    Can someone provide advice.

    Hello

    Check with support from Nividia and their forums might be a known issue.

    NVIDIA - drivers - DO NOT USE THE SCANNER she finds often versions older - information entered in manually
    http://www.nvidia.com/download/index.aspx?lang=en-us

    NVIDIA - Support
    http://www.nvidia.com/page/support.html

    NVIDIA communities (forums)
    http://www.nvidia.com/object/nvidia_zones.html

    You may have to go back to an older driver. Strange that you found has been manually
    older than you. Wonder if the Windows updates or something else installed one
    incorrect driver. Rob - bicycle - Mark Twain said it is good.

  • IPhone screen problems 5

    I have an iphone 5 with screen problems.  When the phone turns first of all, I can't drag the screen to enter my security code.  The screen is blank.  It will take several times before it stand for a long time, just enter the code.  I also have problems with the original key.  I downloaded the virtual home key, and I'm sure now.  However, when the screen is blank, I use the key home, which does not always, to get it back again.  It's very frustrating.  I'm 1.8 GB for use available, my capacity is 12.5 GB so I don't think that's all. I use the cloud for storage of photos, etc.

    Hello. Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • Re: Qosmio G30 and green screen problem

    Dear friends

    I thing is interesting for any owner of Qosmio to look at this:

    http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/comment-page-4/#comment-130784

    http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/

    My Qosmio G30 is already dead, I got an estimate from the official service, to repair my qosmio costs nearly 600 pounds. Is a design flaw. Go on the internet.

    Interesting links! Thank you.
    I have to say then I must be lucky. My Qosmio G30 (German model) works well and without any problems

  • Double screen Enquiry

    I have a Compaq Desktop model number: SG3-250UK and glancing to the establishment as a double screen, search on the web, but had no luck trying to find one, I am sure they must be available, can anyone help?

    philiom wrote:

    I have a Compaq Desktop model number: SG3-250UK and glancing to the establishment as a double screen, search on the web, but had no luck trying to find one, I am sure they must be available, can anyone help?

    The only upgrade to the video that you can install is a PCI Express x 1 video card with two video.  The card must be a low-profile PCI Express x 1 video card (with 512 MB or less VRAM) that there is no PCI Express x 16 slots on the motherboard. For a card with VRAM than an upgrade of the power supply must be considered as your original power supply is only 180W. Who does not have capacity to a level that will attract a lot of current.

    Best regards
    ERICO

  • On the Satellite 1800-921 black screen problem

    Hello
    My satellite 1800-921 has started to give me a black screen after I turn it on. It loads well, go to the desktop and then the screen turns white and I can't make it respond. We can just distinguish the dialogs on the screen so I don't know if it is a screen problem or things I see on the screen are just ghosts...
    It's a bit worrying!
    Does anyone else have this problem? So far, it seems to happen when I turn it on. Usually, I have to turn it off and reboot to get it back and then it works very well.
    Thank you
    Nancy :)

    Hello

    to the old series, it may be that the FL inverter is broken or damaged the tupe of backlight. In both cases, you can see the screen but without backlight!

    To differi if it is a hard - or software error, you should start the laptop and ESC immediately to enter the BIOS. Then the machine must be running half an hour in the BIOS. When the rupture occurred it is quite sure that some hardware is broken. Otherwise, it is a software based and a restore with recovery CD Toshiba should solve the problem!

    Goodbye, TOK

  • Computer screen problem after you download the update from Microsoft Windows

    My computer screen appear stained in colors like "shattered windshield appearance" after download Microsoft window update for the hardware called, ATI Technologies, Inc. - Video - ATI MOBILITY RADEON 7000 IGP. I downloaded this after my computer recovered from a serious error (according to the message) that push me to send an error report. He advised me to download the update custom as indicated above.

    Later, I noticed the screen problem. Can someone help me please on this issue?

    Can you please reduce the OS to an earlier time using System Restore tool and check if this problem has disappeared?

  • Satellite A210 PSAFGC - Bios Update to get rid of the white screen problem

    I also have the white screen problem and I would like to update my bios to version 1.30, it came with.
    The problem I have is that I have a number of room A210 model PSAFGC.
    Support bulletin 98082422 for the update of the Bios does not have my room exactly number and I can not find something for my model.
    The 2 updates are at 1.70 and 1.90. I read the text of these two, and they seem quite different.
    Don't know what to do. Here is the info of the bulletin.

    Resolution:

    Update the BIOS of the computer to resolve this problem, by clicking on the link in the following list for your computer model.

    -Satellite A210 / A215, Ref. PSAFGU: BIOS version 1.70
    -Satellite A210 / A215, Ref. PSAEGU and PSAELU: BIOS version 1.90
    -Satellite Pro A210 / A215, Ref. PSAFHU: BIOS version 1.70
    -Satellite P200D / P205D, Ref. PSPBLU and PSPBQU: BIOS version 1.40

    REF. of the computer it is printed on a label on the underside of the case.

    Any help?

    Hello

    The Satellite * A210 PSAFGC * series seems to be a Toshiba * Canadian * series and I would recommend checking the Canadian driver Toshiba page if you want to download the compatible BIOS for your laptop.

    Here is the link to the page:
    http://support.Toshiba.ca/support/download/ln_bymodel.asp

    Best regards

  • t5570e double screen RDP?

    Working for a client where I set up a server 2008R2 in RDS mode.  Bought 2 t5570e due to one of the users who need both screens.

    The user one screen, it's obvious: Configure an rdp session at startup; When they turn on the morning, the default standard user connects, starts the rdp session, the user connects as themselves, bingo: Office full win7.  Simple.

    Two screens, but... not so simple.

    So: how to set up the double screen of rdp on the thin client? Do I need a dual video card display in the server?

    Well... that was easy. :-)

    mstsc.exe/span

    Fact. :-)

  • Blue and black screen problem

    I have the blue and black screen problem. I want to format my C drive, but he said no, that you can not format this drive. I know that I have Virus problem also and I want to format anyway. Please help me.

    Thank you

    Hello

    ·         What operating system do you use?

    ·         You get the error message?

    ·         You are able to boot to the desktop?

    Method 1:

    I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

     

     

    Method 2:

     

    Why my screen is black when I start Windows 7?

    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

     

     

    Method 3:

    Resolve stop (blue screen) error in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  • TouchSmart IQ506 touch screen problem

    Our company has recently obtained a TouchSmart IQ506 with Windows Vista 64 bit and everything works fine. We did a cool, been reformatting in the network and ran all the updates and others. As you may, or may not, know, the IQ506 isn't a VGA port to install a second monitor or to connect to a projector, so that to use the TouchSmart mirroring an image to the projector, we bought 2.0 of StarTech USB to VGA Display Adapter. I installed the drivers and got work and mirroring the image properly, however, now I'm having a problem with the touch screen.

    The touch screen responds when I touch it, but that the pointer is emptied all the way to the right. Mouse follows my pen up and down with me, but it does not come to the left. It's as if the screen is only read the coordinates there where I touch, and coordinates x are blocked all the way to the right.

    The touchscreen was working perfectly fine until I installed the graphics card driver and software for the VGA display adapter to work. The keyboard and the mouse works fine, everything is perfect except for this touch screen problem. I'm 99% sure it's a software problem, and I wanted to know if there is a known issue, or if anyone else has had this kind of problem. I guess this is the software for the VGA graphics card and I was wondering if this is the case, what I can do for the TouchSmart can support a second screen bypassing screen touch, or any other, problems of alternatives.

    Sorry in advance if there is already a topic on this issue, I went thorugh the forums and can't find anything about it.

    RasterBlaster thanks for your comment.

    I wanted to try something before your steps and I seemed to have solved the problem.

    The problem is that the nvidia card driver was not cooperating with startech to the VGA graphic card driver. I uninstalled the nvidia card driver and all this work and am now able to see on both screens.

    I know I'm going to miss some qualities of video, but from now on, everything works and I think it's what is best. I will try to reinstall the graphics driver, but right now, the problem is resolved. Thank you.

  • T500, double screen, Windows Server 2008 R2

    Hello

    Been looking around, but has not found the solution yet, and I hope that the answer is not NO!

    I have a dual boot of installation, one with W7 with Win2008 Server R2 SP1.

    Under W7, double screen works fine.

    Under Win Server, it shows only the monitor to the laptop, I tried to hook up a monitor to the port-D, VGA, both at the time and one in a tower. Start with VGA connected, start with D-port plugged.

    nothing...

    None of those trial showed Windows I got a second monitor.

    Tried watching pilots, they clam to be up-to-date, tried to install Presentation Director, as I thought, this is not installable on Win server.

    I have the sometihg mist?

    Thanks in advance, if it works, No 4 laptop computer sales will be happy!

    Alexander

    PS: Sorry for the bad English, not my native language

    Finally got hold of 2 laptops, we worked so I grad info on drivers.

    Necessary the Mobile Intel (r) 4 series Express Chipset Family

    Here is the zip file with the installation program:

    http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=20602&ProdId=2991&lang=eng

    Extracted, run, restart, worked, made my day!

    Alex

Maybe you are looking for