Double screen with two VGA monitors (model Inspiron 620)

Similar Questions

• SX2210T-touch screen with two monitors feature

  Solution found by the user ES128 for touch dual monitor.
  I've just set up a configuration of dual monitor with a SX2210T and a ST2220T on Windows 7. I got the touch features work correctly on both. As a first step, affecting either translated the entry only on the primary (the one that has been in primary school at the time), but after playing around with the settings I got work like I wanted. I tried several things, but I think that the right thing to do is go in the settings of the Tablet PC from the Control Panel window and press the Setup button next to "configure your pen and touch poster» There you will be asked to each touch screen and you're done. 2-point multitouch works on each monitor, but not both simultaneously. At one point, I went that one would be regarded as primary, and which caused the hand on a single monitor to take account of the other and vice versa. Following the same steps above again not straightened it.

  Screen touch troubleshooting.
  * Disconnect the 2nd monitor of the PC. Restart the PC so that it only displays one monitor in Device Manager. Depending on your operating system, do the following: -.
  SX2210T Driver (Windows 7 only)
  SX2210T-Touch Application
  SX2210T-Touch Cam
  SX2210T facial recognition Application (no not necessary, only if you want)
  * Test the touch screen on the single monitor feature.

  I've just set up a configuration of dual monitor with a SX2210T and a ST2220T on Windows 7. I got the touch features work correctly on both. As a first step, affecting either translated the entry only on the primary (the one that has been in primary school at the time), but after playing around with the settings I got work like I wanted. I tried several things, but I think that the right thing to do is go in the settings of the Tablet PC from the Control Panel window and press the Setup button next to "configure your pen and touch poster» There you will be asked to each touch screen and you're done. 2-point multitouch works on each monitor, but not both simultaneously. At one point, I went that one would be regarded as primary, and which caused the hand on a single monitor to take account of the other and vice versa. Following the same steps above again not straightened it.

  I have the 2220 sort of setting before the 2210 so it seems I have a gigantic version of the laptop Acer Iconia with two screens.

• Connect two VGA monitors to HP p6774y

  I have two old HP screen flat monitors with connections VGA I'm trying to connect to my new HP p6774y.  The office has only a single blue VGA connection in the back. I hooked a monitior to the VGA port and it works very well.  How can I connect the other?

  Unfortunately, you won't be able to connect your second vga monitor to the pc. The second video port on this motherboard is a DVI - D port. DVI - D provides only a digital signal which does not work with your analog VGA monitor.

  DVI - I to VGA adapters are available because DVI - I includes an analog signal, but also a digital signal.

  Apparently, DVI - D to VGA converters are available, but I'm not sure how that they work.

  If you want a second vga monitor on your pc, you will need to install a second vga graphics card, if you have an available housing.

  Some information about dvi connections are available here.

• Windows 7 does not start with TV VGA monitor

  Basic information: Dell Inspiron 530 desktop, CPU Intel, 2 Gig RAM, Windows 7, using the integrated video.

  I bought a TV with a VGA input and tried to use it as a monitor.  The computer was running when I connected the VGA to TV.  The computer recognizes the TV, game screen resolution, etc..  After that I turned the computer off and tried to restart it, it wouldn't start.  There is no video output.  If I connect to a VGA monitor, it came out, and then I can connect to the TV.  TV manufacturer was no help.  Why my computer will not recognize the TV to start?

  Thank you.

  Elder salvation,

  Thanks for the reply.

  The computer is not designed for Windows 7 and Dell does not have the drivers for the computer with Windows 7.

  Basically you can not get drivers for this pc.

  You can try to visit the Intel Web and automatic detection tool and cehck Intel if it can help you to get the drivers.

  http://www.Intel.com/p/en_US/support/detect

  Additional information: Please check for optional updates and install all updates for the computer.

  Hope this helps and please let us know the status.

• Satellite A200 - black screen with two beeps

  Date: October 17, 2009

  I have Toshiba Satellite laptop computer * model A200 PSAFCA-01400J *. I am facing a problem of * completely black screen * (I can't see any image either). It happened twice more than the screen wouldn't turn on by moving the mouse or the touchpad. To turn on the screen I had to restart the computer. The screen worked well until it turns off again. Since it does not turn on even after I restarted my computer several times. I noticed that my * Windows vista home premium * load properly I can hear audio that indicates that I am ready to open a session. I also noticed the sound signal after slipping my finger on the sensor attesting that I connected successfully, but the screen remains black.

  When I turn on my computer, I noticed that it sounds two beeps, first beep is short and the second beep is relatively long. I tested the cover closing the cover switch and noticed that my computer goes into sleep mode and by opening the cover that Eve turns off and my computer turns on again; but the screen remains black. One of my friends suggested that the backlight of the screen inverter or the lid switch is defective. Can someone tell me what could be the problem and what do the two beep codes?

  Thank you

  Hi mate,

  Normally the beep codes at the start of average that it s something wrong with the hardware of your laptop. As Akuma said, maybe the graphics card or RAM must be replaced or other parts too.

  Have you already tried to connect an external monitor? You can see a picture on this subject?
  I don't know but maybe what he s m only internal something wrong with the monitor.

  In any case, I think you should contact a service provider for help. Technicians can check the laptop and fix it for you.

  Welcome them

• AMD Radeon 6450 with two DVI monitors

  just bought a new HP Pavilion p7qe with a graphics AMD Radeon 6450.  How 2 DVI monitors? I tried a digital dual link DVI, of no separator. I ordered a multi hub adapter, DP DVI 3 screen... who do not work.  Help!

  Hello

  The Radeon 6450 on your PC has three ports; DVI, HDMI, and VGA according to the configurator.  Please check this information.

  You can use a DVI cable to HDMI. www.pccables.com you can think of an adapter (DVI-HDMI).  I do not recommend adapters because they add more points of failure.

• W540 - display resolution double screen with cable DVI - D Dual Link

  I recently bought a W540 and connected to my Dell u3011 30 "monitor. I used the Dual Link cable DVI - D that came with the monitor and connected on my Dock Ultra. The maximum resolution I can get is 1920 x 1080? When I pass a display port cable I can achieve complete resolution of 2560 x 1600? Is there something I need to do to get the complete resolution of 2560 x 1600 with dual link DVI - D cable? I want to be able to connect 2 laptops to a normal screen and 1 entrance to port the screen so I need to be able to use the DVI cable on the 2nd machine while allowing resolution 2560 x 1600.

  Port DVI - D on the Ultradock is single link only.

  If you need DVI - D with double bond (i.e. 2560 x 1600) resolution, you need an active displayport to dual binding converter. StarTech makes, they should be about 80 USD or something in this region.

• View double screen with XP virtual

  I need to know how to set up a display with my virtual Windows XP dual monitor (the virtual XP runs on Windows 7 Professional 64 - bit).  Help, please!

  Using two monitors of the Windows XP Mode virtual machine?  I'm sorry, there is nothing built in Windows XP mode which can do.  The Windows XP virtual machine uses a very basic simulation software video card which does not have this capability, even if the Windows 7 machine has two monitors.

  You can move the entire window of the Windows XP Mode - Windows Virtual PC between monitors, but I don't think that's what you're asking.

  For a few other possibilities, please visit using Virtual PC with multiple monitors, kind of and several monitors with VMs via MaxiVista .  I don't know if they work with Windows 7 and the latest version of Windows Virtual PC, however.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Configuration of the Oracle Workflow with two DB monitor

  Hello
  I installed "Oracle Workflow Monitor" because I want to see the sequence of execution of the owb process. During installation I set the credentials (Worfklow schema, DB Hostname, Port number, Oracle Sid and password). Everything works fine, but if I want to change the DB host name (I installed the monitor with the credentials of my "TEST" machine and now I want to put it with the "PROD" machine identification information), what can I do?
  Is there a configuration file I can edit to make this 'change '?
  
  Thank you very much
  Luca

  Hi Luca,
  You must edit the file
  WF_MONITOR_HOME\Apache\modplsql\conf\dads.conf
  (Parameter PlsqlDatabaseConnectString)

  Kind regards
  Oleg

• Problem with 5.2 and computer ThinClient view double screen

  Hello

  When I try to use the double screen with Windows 7, PCoIP Protocol and a computer ThinClient Fiju FUTRO S900 (3.8.0) it doesn't.

  The office is just mirrored between the two screen but it is impossible to extend the desktop. I can't change the display settings in Windows and as much as I know there is no GPO that prevent to do.

  When I connect to this virtual machine with View Windows Client it works.

  Any help?

  Thanks in advance.

  OI!

  I found the solution.

  Setting the screen must be configurerd on the display of the computer ThinClient S900 preference.

• Reviews for dual graphics card system with Pavilion a6130n monitor?

  I am keen to implement a system of double screen with Pavilion a6130n running Windows XP.  I tried to use edge nVidia GeForce with nVidia 2nd card in the expansion slot.  Apparently embedded is not usable with another card in place.  My next thought is to connect two monitors on a nVidia graphics card (using the VGA and DVI ports (with adaptor if necessary)).  Will this work?  Can anyone suggest a suitable video card to accomplish?  Thank you very much!

  No problemo.  Don't forget to remove the video driver on board.  You are looking for a large heat sink if you go with a passively cooled GPU.  The 7200GS runs HOT (80 c) with heat sink base (no fan).  Practically all dual DVI out 7xxx, 8xxx and 9xxx will support two monitors.

  http://support.Microsoft.com/kb/307873

• Cannot select a native resolution when double screening

  Hello
  Here are the basics. Laptop is a HP Pavilion DV2480se running Vista Home premium 64-bit w / SP2. I have a Samsung Syncmaster 2243 NW LCD screen attached via a VGA cable.

  Since I got the screen (4 months) I was able to double screen with the laptop screen running at its default value of 1280 by 800 pixels and LCD 1680 x 1050 screen (it is wanted to display resolution) by adjusting the parameters via the display settings and/or the NVIDIA Control Panel. I do always disconnect the LCD screen of the portable computer and reconnect without problem. Today, if I plugged it upward and the screen LCD looked funny and when I went to set the resolution in the display settings I can not select 1680 x 1050, nor in the NVIDIA Control Panel. I tried to unplug and reconnect the cable, restart, reinstall the driver, allowing the extra modes on the monitor etc and nothing allows me to get the mode 1680 x 1050.

  I tried to connect to another screen but have the same problem with it.

  Can someone provide advice.

  Hello

  Check with support from Nividia and their forums might be a known issue.

  NVIDIA - drivers - DO NOT USE THE SCANNER she finds often versions older - information entered in manually
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA - Support
  http://www.nvidia.com/page/support.html

  NVIDIA communities (forums)
  http://www.nvidia.com/object/nvidia_zones.html

  You may have to go back to an older driver. Strange that you found has been manually
  older than you. Wonder if the Windows updates or something else installed one
  incorrect driver. Rob - bicycle - Mark Twain said it is good.

• Slide show full-screen with 2 photos

  Hello
  I would like to know how to create a slide show full-screen with two clikable photo inside, as this Web site: http://www.eturaweddings.com
  Thanks for your help

  David

  Hi David

  It would be a bit complicated if you must use a fullscreen, accordion and tooltip, or any other publication inside Accordion widget or you can use different pages to render a similar effect.

  Thus, for example

  -Insert the widget in full screen

  -Insert the Accordion with the width of the page (use the same image that is used for full screen)

  -Insert a ToolTip when the trigger would be half the size of target container and the installation program on the click of the mouse action (you set the trigger and target in the layers panel)

  Sorry, but that would be a workaround, I know a little long.

  Or you can create separate pages where you can use the widget in full screen for different pages using the same images.

  In addition, you can try to use slide shows in the library exchange Muse:

  http://Muse.Adobe.com/exchange

  Thank you

  Sanjit

• Cloning the hard drive on desktop PC Inspiron 620

  New Member, first post here, great resource.

  I work a friend with his desktop computer Dell Inspiron 620; 3.5 years.  The hard drive begins to run out, but computer still works fine right now.

  I ordered a recovery and support on the way via Dell out of warranty support in case the disc falls in catastrophic failure before we get to this.  But rather than use this recovery media, reload the operating system, drivers, all applications, customization, etc.  I'm thinking of 'cloning' of the current hard drive while the original hard drive is still operational.

  I have never cloned a drive before, but I understand that this would be the procedure. I buy a new identical replacement hard drive (found a 3.5 Sata 1 TB size) and also buy an external USB enclosure for the new disc, connect the new drive via a USB cable, start the cloning software, and then install the disc cloned when cloning is done in the computer?

  No disadvantage of 'cloning' vs reload the operating system?  Any recommendations of any free cloning software, I consider using?   Cloning especially appealed to me because it is a highly customized small business computer.  Get this computer to its current state the long way is certainly feasible, but I want to do the simplest possible.

  Thanks in advance for help people...

  Birchlake

  New Member, first post here, great resource.

  I work a friend with his desktop computer Dell Inspiron 620; 3.5 years.  The hard drive begins to run out, but computer still works fine right now.

  I ordered a recovery and support on the way via Dell out of warranty support in case the disc falls in catastrophic failure before we get to this.  But rather than use this recovery media, reload the operating system, drivers, all applications, customization, etc.  I'm thinking of 'cloning' of the current hard drive while the original hard drive is still operational.

  I have never cloned a drive before, but I understand that this would be the procedure. I buy a new identical replacement hard drive (found a 3.5 Sata 1 TB size) and also buy an external USB enclosure for the new disc, connect the new drive via a USB cable, start the cloning software, and then install the disc cloned when cloning is done in the computer?

  No disadvantage of 'cloning' vs reload the operating system?  Any recommendations of any free cloning software, I consider using?   Cloning especially appealed to me because it is a highly customized small business computer.  Get this computer to its current state the long way is certainly feasible, but I want to do the simplest possible.

  Thanks in advance for help people...

  Birchlake

  There is no need to buy an external enclosure, just install the drive to be cloned as secondary, all you need is a SATA data cable, there is a spare SATA power connector already within the chassis, for an additional HD.

  The simplest method I prefer is to clone the existing hard drive to the new, that will also transfer all applications and programs.

  You need an imaging utility, similar to True Image Home 2016.

  http://www.Acronis.com/homecomputing/products/TrueImage

  Acronis resize partitions transferred to match the size of the new hard drive.

  I also found the free version of AOMEI of Backupper to be excellent and have used it with great success with Windows 8.1 and 10

  http://www.backup-utility.com/free-backup-software.html

  Hard drive manufacturers, also have their own free cloning software available, but it can be used only with their hard drives.

  First, install the new drive as the secondary and the image of the main hard drive in it.

  Immediately after the cloning, shut down the system, switch the data cable [SATA port 0] to the new disk, making the new master hard drive and see if the system boots properly.

  Start the system with only the new hard drive connected.

  Be sure to leave the original drive disconnected, until the new hard drive is working to your satisfaction.

  Before cloning a hard drive, make sure that the existing drive has no corruption or virus on it, because they will be transferred to the new hard drive.

  As we already mentioned, it will take a second SATA data cable, there should be a spare connector to SATA power inside the housing.

  Bev.

• Color variation of Windows 7 on two screens despite the correspondence of the monitors, model, connection & settings

  I'm managing about 20 machines to windows 7 64 bit, but have noticed that, in each of them with two screens, there is a slight color variation (right monitor being darker and more colorful) between the two monitors despite the monitors of the same brand and model (workstation make & models vary).

  As a test I switched monitors and the problem remains.
  I also tested the type of connection cable / in case the fault is due to the difference between VGA/DVI but the prob persists indicating is not the screen, indicating that it is to the BONE (the denominator) as graphics cards vary also in the brand/model.
  would be very happy for any help you can offer
  Thank you

  Hello

  The question you have posted is better suited for the TechNet forums. You can post the question on the link below.
  http://social.technet.Microsoft.com/forums/en-us/categories/

  I hope this helps!