Double TIS, a VPN works, and the other routes not

I have an ASA5505 and having everything-Connect configuration so that I can use my iPhone or iPad and get my internal IP of Cisco VC240 cameras as well as other devices on my network, but they are the main reason that I have configure the VPN.  It works like a champ and I don't have to change the settings of the iPhone/iPad app when I'm in the office or outside the office.

I've added since an additional service provider because of certain other services on my network.  I use the ASA track feature to follow the road to an access provider and if it fails, the other ISP resumes the connection.  I copied the orders for the 1st access provider, changed the names to the second ISP and placed orders in the SAA.  I can now connect through any connection or another ISP on the iPhone/iPad.  If I connect to my ISP later, I am connected but the ASA does not traffic to me.  My stats on the iPhone shows data sent, but no receipt.  I can not ping any device, to access my camera, etc.  But when I connect to another ISP, it works fine.

I didn't know if that's even possible with the ASA but assumed that it would be like most everything works, so it seems miss me probably a small order and it would work on either.

Anyone know if this is possible?  And if so, any idea what could cause one to work and the other does not work?

Advertisement

Hello Todd,

What about this entry:

NAT (inside, evertek) static local-network local-network destination source static Anyconnect client Anyconnect client

Running from sh I see that he is not exempt from nat.

Best regards

Eugene

Tags: Cisco Security

Similar Questions

  • My master password stopped working and the reset did not fix it.

    My master password had been working perfectly. All of a sudden it stopped working. It might have coincided with the installation of SP1 Win7. I have reset the password (although this will create a lot of work) and it still does not work. Loading Firefox ver 5 did not help either.

    Which also happens if you open the password manager?

    • Tools > Options > Security: passwords: "saved passwords" > "show passwords".
  • Remote control does not work, and the load does not appear on Apple TV

    Hello

    I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

    Apparently that was the case.   He seems to have just died.

    I did pay for more than two hours and it still does not appear under devices Apple TV.

    My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

    If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

    Any suggestions on how to fix this?

    A reset is complete? Restart... no change.

    Thank you

    Bob

    1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
    2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
    3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
    4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.
  • Windows Paint text installation will not work and the 'A' accentuates not when the cursor passes over it

    I just wanted to put some txt on photo paint open so imported the scanned picture and everything else works, but the ease to enter text. Move the cursor over the 'A' does not the highlight box around him upward and toolbars from view has the text one checked but dimmed down. Is the same for an empty document in the paint.

    Two ideas...

    (1) Vista paint text button does not work:
    Reach... View / Zoom / Custom / 100% / OK

    (2) I was wondering after leaving by clicking on the 'A '...
    What happens if you move the pointer over
    the picture and left click or drag to create a
    TextBox?

    The following links may be useful:

    Windows Vista-
    Open Paint
    http://Windows.Microsoft.com/en-us/Windows-Vista/open-Paint

    With the help of paint
    http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint

    Paint tools
    http://Windows.Microsoft.com/en-us/Windows-Vista/paint-tools

    How to rotate an Image using Microsoft Paint
    http://maximumpcguides.com/Windows-Vista/how-to-rotate-an-image-using-Microsoft-Paint/

    Microsoft Paint-
    How to add text to digital pictures in Vista
    http://www.ehow.com/how_5841367_add-text-digital-pictures-Vista.html#ixzz1lC2YSoS8http :// www.ehow.com/how_5841367_add-text-digital-pictures-vista.html

  • I have two sites of BC. We're working while the other is not.

    I designed thoughtcake5.businesscatalyst.com and macademia.businesscatalyst.com in Adobe Muse. ThoughtCake BC site appears in my browser, but 'the server is not found' for macadamia nuts. This had been the case for a few days.

    No explanation or help would be greatly appreciated!

    Thank you!

    Hi rgrtht,

    It seems that the system and the "macadamia" Secure site URL was not a record. I have since fixed this problem, and I can confirm that these URLS now solves your Business Catalyst site. If not, please clear your browser cache and try again.

    About thoughtcake5.businesscatalyst.com, I am unable to find a site that uses this URL. However, I can see other sites associated with your account and which have similar names that have no similar problems.

    See you soon.

  • What first or after effects updated and the other is not dynamic linking fails.

    If I update one of the programs but not both, the instant update of the related files will not occur.  Does anyone else have this problem?

    It happens sometimes... If you need to get the other program updated, which is often as simple as the signature of your CC desktop app & back in.

    Neil

  • Send all VPN traffic and the other end it blocks Internet

    Hello

    I wonder if I can get a RV042 VPN Tunnel to a RV082 and in the RV082 block all traffic on the internet that comes form the computers that are behind the RV042.

    Something like this:

    Remote PC-> RV042-> VPN-> RV082-> firewall RV082 (block internet traffic, allow intranet traffic)

    Thank you very much

    Oliver

    The scenario you describe should be doable with a pair of RV042 and RV082, where all traffic is transmitted by RV042 to RV082. What you need is to configure an access on RV082 rule to deny the RV042 subnet HTTP traffic to ALL (internet).

  • My CD-writer/DVD-rom does not work and the door does not open

    I tried Device Manager and that will not be the same work, I disabled the drive once I discovered it did not work.  I have a Compaq presario XP sp3 with Internet Exporer 8 is possible that I can go back to IE 7?

    I tried Device Manager and that will not be the same work, I disabled the drive once I discovered it did not work.  I have a Compaq presario XP sp3 with Internet Exporer 8 is possible that I can go back to IE 7?

    Hey Craftslady2011

    Read below how to open the cd with a paper clip tray

    http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

    How to uninstall ie8 at the link below

    http://support.Microsoft.com/kb/957700

    and reading this on cd XP problems

    This article explains how to solve common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps

    http://support.Microsoft.com/kb/321641

    Here is the vista forums

    for xp questions use the link below to the xp forums

    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

    Walter, the time zone traveller

  • Two identical servers and the other is not supported

    I have pretty old xseries336 with Intel Xeon 3.2 GHz server. During installation it is said that he needs CPU 64 bit with LAHF and SAHF support.

    I understand that, because it is very old CPU, and I heard that esxi 5.0 needs support VT - x, which does not have this CPU.

    However, I second the same server with the same processor and BIOS version on which I have installed ESXi 5.0 without any problem at all.

    I can confirm it works on Xseries336 with Intel Xeon 3.2 GHz. (also attached) Screenshot:

    http://ImageShack.us/f/820/esx5.jpg/

    Does anyone have any ideas as to what might or what might be the difference between two supposedly identical servers?

    janojan wrote:

    Is it possible to fix this?

    I just updated the system with UpdateXpress tool and still no luck.

    According to the update of the Intel specification, it is possible for the BIOS to provide a fix for this erratum.  However, I guess that UpdateXpress will have flashed the latest BIOS.  Unfortunately, there is no software workaround solution in ESXi 5.0 for this situation.

  • Sync does not work and the application does not start

    Anyone has this same problem. Reinstall AdobeCC startup app still have no reason.

    adobe.PNG

    Mac https://forums.adobe.com/message/5470608 spinning wheel

    -Similar to Windows https://forums.adobe.com/message/5853430

  • loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

    loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • the touchpad has stopped working and the slider completely gone

    Original title:

    Touchpad and cursor

    I have a Gateway NE 52209u with windows 8.  My touchpad worked fine, then all of a sudden the touchpad no longer works and the cursor disappears completely.

    I tried the fn and f6 keys but nothing helped, Please HELP!

    Hi Jacob

    Thanks for posting your question on Microsoft Community

    We understand your touchpad no longer works. We will be happy to help you with the problem.

    1. Since when you are confronted with the problem?
    2. You have a mouse connected to the computer?

    Problem may occur because of corrupted or obsolete touchpad drivers. I suggest you follow the troubleshooting methods listed below and check if that helps.

    Method 1: Run the hardware and the resolution of the problems of the unit.

    If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

    Follow the steps below:

    (a) press Windows + W together.

    (b) write the troubleshooting in the search box right top corner, and then press ENTER.

    (c) click the Troubleshooting tab

    (d) click on display all option on the top left corner.

    (e) select the options of the equipment and devices in the list.

    (f) click Next to run the tool material and device.

    Method 2: Update another pointing device driver.

    Follow the steps below:

    (a) press Windows + X key when you're at the office.
    (b) select the Device Manager.
    (c) find and double click on keyboard and another pointing device driver in the left to uninstall Panel
    (d) right click on the device, and then click Update driver software.
    (e) select the search option automatically update driver software.
    (f) restart your computer.

    If the problem persists, please try the following method.

    Method 3: Uninstall another pointing device driver.

    Follow the steps to uninstall the driver.

    (a) press Windows + X key when you're at the office.
    (b) select the Device Manager.

    (c) find and double click on keyboard and another pointing device driver in the left to uninstall Panel
    (d) right click on the device, then click on uninstall.
    (e) restart your computer.

    Check the updates of Windows for the latest driver updates.

    You can download the drivers for the latest drivers from the link given here and install it. Select the download tab and select the correct computer model number.

    http://us.gateway.com/GW/en/us/content/drivers-downloads

    You can also check for any error in the device for the keyboard Manager and the other pointing device driver and write us. Please follow the steps below to see.

    (a) press the Windows key + X Key on desktop.
    (b) select the Device Manager.
    (c) develop keyboard and other pointing device.
    (d) check if there is no error (! sign) or (?) Sign).

    Reply back with the results.

  • My office is half divided. One opaque side and the other clear help

    My Mac Mini desktop computer has suddenly split into two halves. One opaque side and the other clear help as if half of the screen is selected

    I just realized that control of the mission, the launching ramp and dashboard do not work (I can't call them upward)

  • I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image.

    Hello...

    I wonder if you can help me with a problem with my desktop OS X El Capitan 10.11.4 various...

    I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image. There is no disk in my hard drive... I try to download again, but still the same message...

    Help, please...

    Much thanks

    Lisa

    < re-titled by host >

    The actual message means you need to move the mounted image - the small icon that is displayed after you double-click the .dmg - and put it in the trash.

    Where do you see the message your computer?

  • I just upgraded my Firefox to version 9.0.1, I get multi-page opening now when I launch my browser. A page is my home page, another is welcome to Firefox, and the other is my LassPass. Can anyone tell my why this is happening?

    A page is my home page, another is welcome to Firefox, and the other is my LassPass. Can anyone tell my why this is happening?

    Create a new profile as a test to see if your profile is the source of the problems.

    See "basic troubleshooting: a new profile:

    There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

    If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

    See:

Maybe you are looking for