Double track scanning with the help of Deskjet 3520
Hi all
I just bought an all-in-one Deskjet 3520 Pinter. Far so good except that I can't figure out how to scan multiple pages into 1 PDF document. I found a guide who said there was a button to add pages on the left side of the screen preview of the scan, but it doesn't seem to be there!
I am running Windows XP. And help greatly appreciated
Scanning from the printer should actually encourage not to all other pages...
Scanning multiple pages can be done via the software itself.
Open the printer software, or scanning HP and then scan a Document or Photo.
Select PDF, check the resolution is 300 dpi or less and preview it is checked, and then click Scan.
change pages, and then click the Plus sign button to scan additional pages.
Once you're done save the analytical work and it must be registered on a single PDF file.
Shlomi
Tags: HP Printers
Similar Questions
-
Problems with the help of Deskjet 3745 on home network 2-PC
I have an old PC running Windows XP SP3 and a new one running Windows 7, but only one printer. The network that connects the PC is on an ADSL router with its own external Iomega network drive with a USB port.
To make the printer can be used on two computers,
- I initially plugged on the Iomega USB port. But the port was effectively a 1-way connection, so I couldn't preview before printing to see which form/profile of the printer used. So I put discarded and...
- revenue to the printer connected to a PC all the time and share it on the network. But two different PCs drivers needed which would not talk among themselves, and the establishment would simply not work.
- Finally, I went back to the simple method of the printer on the USB port of any PC, sure I needed it for us. Worked well for a while until the WINDOWS 7
- Print preview has begun showing empty images (but print correctly).
- print-queue doesn't have to face the cancelled documents.
I had help of Deskjet Support to address this issue, which even reinstall the drivers on two PCs - several times! But I'm still left unresolved 3 problems with Win 7 donations.
Has anyone encountered a similar situation and found a satisfactory solution to work?
Try the following: connect the printer to the XP computer and set the machine XP to share it on the network. On the Windows 7 machine go devices and printers folder, add a printer, a local printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, and then click Windows Update, and then select (not Hewlett-Packard) HP Deskjet 3740 series (Bobo).
-
Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.
maryml wrote:
Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.
Press and hold on the text and wait for the copy/more pop up.
-
Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.
Hello
Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
is supposed to work.You will probably need to reload the drivers of the device and any camera control software.
Login as an administrator.
Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Is it posible to track people play that your app is saved with the help of bbm surveys.
Hello
Save with bbm on launch my application. There are statistics that I can look who will give me a sort of return to how many people my app was saved with the help of bbm surveys... find out how many people have my app diaplayed in the Apps of their bbm profile section...
Thank you
No, we don't currently offer reports with this information.
-
With the help of Club running on the Nike watch +.
Hello
This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?
As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?
Hello
You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:
- Contact Nike (support is available by phone and via social media):
- Nike + running Club to support:
More information:
https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8
-
How to change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4
With the help of Mac 'Pages '.
A typing mistake?
If it is and you mean Photos Date of Mac are modified by selecting the photos using the Image menu == > adjust the time and date of order and changes made to the metadata such as keywords, location, etc. are made by selecting the photos and find the info and registering metadata in the Info window
These are detailed in the help topics of pictures - a good place to look for help on the Photos
View and add information about the photos
You can view and add information about your photos. For example, you can see the date and time a photo was taken, the information about the camera that took the photo and badges that indicate the status of the photo. You can assign titles and captions to photos, add or change the location of the photos and change the date and time for them information. You can select multiple photos in an instant and add or change information about them all at once.
View and add information about the photos
To view or change information for the photos, you select one or more photos, and then open the information window.
- Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
- Add or change information: Change the following.
- Title: Enter a name in the title field.
- Description: In the Description field, type a caption.
- Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
- Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
- Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
- Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.
Show titles, other metadata and badges
Change the date and time of photo
You can change the date and time associated with a picture. You can do this if you are traveling to a location in another time zone, and your camera affect your dates photos and periods that are correct for your House, but not the place you visited.
- Select the photos you want to edit.
- Choose Image > adjust Date and time.
- Enter the date and time you want in the modified field.
- Click a time zone on the map, if necessary.
- Click on adjust.
-
Is it possible to delete a plot with the help of the mouse select the chart control?
For example, when I use the plot to draw thousands of lines on the chart control, I want to delete some of them, but there are thousands of generated plotHandle.
How can I get the plotHandle of the specific line on the chart control with the help of the mouse to select the option?
If I save the information from the lines, such as the plotHandle and the coordinates on a table or list, etc, I compare information lines for the plotHandle of the specific line.
Is it all a user-friendly way to remove a track selection on the chart control?I can't give you a reasonable way to solve this problem, since as you have already noted plot do not snappable plots.
A possible warkaround would be to replace the plot of individual instructions with a PlotXY matching with 2 bays 2 points each, which correspond to the x 1, x 2, y1, y2 parameters to plot. PlotXY plots are snappable, so you can enable this procedure select the plot and remove it.
-
With the help of HP printers in Windows 8
Windows 8 is the latest operating system produced by Microsoft, Inc. There are a few differences in the way that you access functions such as printing and scanning from older versions of Windows operating systems.
Whenever you install a printer in Windows 8, there are a few options to do: complete features in OS driver or driver from Windows Update. There are similarities between the various drivers, but not everything works the same.
However, HP has released a document with detailed instructions on the use of HP printers in Windows 8. The document can be found below:
With the help of HP printers in Windows 8
Good impression!
Hope this helps everyone!
-
Mac Double-sided printing with the new Adobe
With the help of Mac Lion 10.7.3 with Officejet Pro 8500 910 has tried both Safari and Firefox. With the help of Adobe 10.1.3.
Print document is http://www.bls.gov/news.release/pdf/laus.pdf
Have downloaded new drivers from HP (I think). Using the button at the bottom of page printer, print double-sided does not appear. There is no other way to print this document (unable to use drop-down menu to print or save file under).
Hello
It seems that there could be a problem with the specific PDF file.
During the preview of the file, I got a blank page so either Firefox and Safari on my PC and my Mac, but it seems well using CTRL + P to launch the print dialog box.
Otherwise, you can also try saiving the file to your desktop.
Open it with Adobe Reader and try to print to instead use the browser.
I could not see similar problems using Google Chrome, so it might worth a try as well.
It will be useful,
Shlomi
-
My AirPort Extreme end not implemented with the help of AirPort Utility
Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.
When I try to set up as a Wireless extender...
Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?
.. .it will not accomplish the synchronization upward with AirPort Utility.
Which version of AirPort Utility? If it's on your Mac... and you don't know what version you have...
Open AirPort Utility
Click the AirPort Utility menu in the upper left corner of the screen
Click on about AirPort Utility
Report on the version number you see here
You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?
-
With the help of old gear series noon on El Capitan
I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.
There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.
Someone at - it ideas, would like to get this Panel communicating effects via MIDI.
Thank you
Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!
-
With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?
Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.
If that's you then pictures will miss a lot for you.
If this isn't the case, then opening was probably overkill for your needs.
If you like the pictures then this is the way to go.
-
With the help of Mac 10.9.4
If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.
-
Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?
Would you like to share why you must do a clean install?
You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.
Computers that can be upgraded to use OS X Internet Recovery - Apple Support
PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.
Maybe you are looking for
-
How to use the synchronization recovery Code?
Hi, my name is Furkan. Sync deleted my membership. Recovery, I want to use my code. Where I write the recovery code? Thank you, cordially...
-
Yesterday, my homepage has changed - there is no normal firefox symbol with the little Fox hug th Earth. Just four color wheel, next to him "search results" then the field empty to enter in a search. Below that is an ad for a registry cleaner. It pre
-
PLEASE HELP ME UNLOCK MY COMPUTER!
I let a "FRIEND" use my Acer laptop one night and when I turned it on for the connection, I couldn't! I sign as a guest now and I can't download it, access files (N it is not) and now I get a lil pop up at the bottom right of my computer that tells m
-
This happens if I click on a file or a file that is already open. The opened file will blink in the taskbar, but does not open on the top of any page is currently on the screen. When I click on previously open programs bring them on top as usual. Ope
-
BlackBerry Smartphones SLOW BB Desktop Manager
I have about 6,000 names in my Outlook address book. When I sync, it seems that the Desktop Manager will back and back and back and forth between my laptop and 8900... MORE time than necessary. I tried to make the minimum settings, but there are stil