Doubt about YOKOGAWA OR1400 driver

Dear Sir.

We need to interface the CPU with YOKOGAWA OR1400 via a GPIB interface,

We are downloaded driver of OR,.

But we need to change the print (for example. Number of channels to be printed) using Labview.

Not found this option in the existing driver, how do I change the channels of print...

Thank you

Which; s driver not supported (and badly written). If the function does not exist, look up in the manual and just use a VISA write to send it.

Tags: NI Software

Similar Questions

  • Doubts about RAC infrastructure with a disk array

    Hello everyone,

    I am writing because we have a doubt about the correct infrastructure to implement RAC.

    Please, let me first explain the current design we use for storage Oracle DB. Currently, we are conducting multiple instances in multiple servers, all connected to a SAN disk storage array. As we know that it is a single point of failure so we have redundant controlfiles, archiveds and Orde in the table and in the internal drive of each server, in which case table has completely failed us 'just' need to recover cold backup nightly, applied hoops and Oder and everything is ok. This is possible because we have autonomous bodies and we can assume that this downtime of 1 hour.

    Now, we want to use these servers and implementing this table to a RAC solution and we know that this table is our only point of failure and wonder if it is possible to have a RAC multi-user solution (not AS a node) with controlfiles/archs/oder redundant internal drives. Is it possible to have each written full node RAC controlfiles/archs/oder in drives internal and applies these files systematically when the ASM filesystem used for CARS is restorations (i.e. with a softlink in an internal drive and using a single node)? Maybe the recommended solution is to have a second table to avoid this single point of failure?

    Thank you very much!

    CSSL wrote:

    Maybe the recommended solution is to have a second table to avoid this single point of failure?

    Fix. It is the right solution.

    In this case, you can also decide to simply use the distribution on both tables and mirror of the array1 array2 on table data using the ASM redundancy options.

    Keep in mind that the redundancy is also necessary for connectivity. If you need at least 2 switches to connect on two tables and two HBA ports on each server, 2 fibers running, one to each switch. You will need driver multichannel s/w on the server to deal with the multiple I/O paths for storing same lun.

    Similarly, you will need to repeat this step for your Interconnect. 2 private switches, 2 cards on each server which are pasted. Connect then these 2 network cards on the 2 switches, one NETWORK card per switch.

    Also, don't forget to spare parts. Spare switches (one for the storage and interconnection). Spare cables - fiber and everything that is used for the interconnection.

    Bottom line - not a cheap to have a redundancy solution. What we can do is to combine the layer of Protocol/connection of storage with the interconnection layer and run both on the same architecture. Oracle database machine and Exadata storage to servers. You can run your storage Protocol (e.g. PRSS) and your Protocol (TCP or RDS) interconnection on the same 40 GB Infiniband infrastructure.

    As well as 2 switches Infiniband are needed for redundancy, plus 1 spare. With each server running a dual port HCA and one cable for each of these 2 switches.

  • The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?

    The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?  Both units are of the same type and speed.  both are records hard internal seagate w double disc in the drives

    On Thu, 20 Sep 2012 14:41:30 + 0000, Stephen_403 wrote:

    The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?  Both units are of the same type and speed.  both are records hard internal seagate w double disc in the drives

    No, at least not by us.

    Open a hard drive for some reason any at all can be done in special
    laboratory as parameters. Something else will destroy the disk.

    There are companies trying to recover data from broken disks,
    and they are sometimes successful. And who knows, maybe they
    sometimes use methods such as what you describe.

    But if you plan to use such a company, know what they
    are all very expensive. It does not for most people.

    For the future, if you have files you want to be sure are not
    lost, make sure to have in place a backup procedure on a regular basis the
    external media player.

    Ken Blake, Microsoft MVP

  • I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

    I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

    See the following article:
     
    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

    Make sure your network connection is working and properly configured.

    You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
     
    In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
     
    1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
     
    2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
     
    3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
     
    4. Select "Network adapters" under common hardware types, and then click Next.
     
    5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
     
    6. click Next and follow the remaining instructions.

  • Doubts about licenses

    Hi all

    I have a few doubts about the price of licenses.

    I understand, I can deploy an APEX Server 11g XE free of charge, but what happens, if I want to install, a version no XE?

    Imagine a billing application, for 10 users, and I will assume that a Standard is sufficient. With the help of [this price list | http://www.oracle.com/us/corporate/pricing/technology-price-list-070617.pdf], how much exactly will cost?

    I understand I can get a license by user or server, or I have to license user and server too?

    Kind regards.

    Hello
    metric license is named plu user or license CPU (see the table of the core).

    for a quote, you can take a look in the oracle store or ask your dealer for an exact price oracle.

    concerning
    Peter

  • I have a doubt about the file .folio and publications

    Hello, I m new here.

    I want to start working with DPS, but I have a doubt about which version to buy.

    At the moment I have one customer just wants to publish a magazine, but my intention is to have more customers and publish more magazines.

    If I buy the unique edition of DPS, I read that I can publish a single file .folio. What it means? Each folio file represents a publication?

    Please, I need help to understand this before you purchase the software.

    Thank you very much

    Paul

    Here's a quick blog I wrote to compare the simple edition and

    multifolio apps:

    http://boblevine.us/Digital-Publishing-Suite-101-single-Edition-vs-multi-Folio-apps/

    Bob

  • Doubts about event handlers

    Hello

    I had some doubts about the event handlers in the IOM 11.1.1.5...

    (1) I want to use the same event handler for the message insert and update Post task... Can I use the same handler for this... If Yes, then how can I make...

    (2) can I create the single class of Plugin.xml and add all the jar files in IE single lib folder and zip them all together... If yes then what changes I need to do? Need only add that the plugin tags for different class in the plugin.xml file files? OR need to do something extra too...?

    (3) if I need to change something in any class handler... Is it need to unregister the plugin and register again...?
    If Yes... Is it need to delete the event handler using the weblogicDeleteMetadata command?

    (4) that we import the event handler of the path as event manager/db /... If we add all the evetn handler.xml files in this folder... As when importing weblogicImportMetadata called recursively all files in this folder... Now, if I need to change anything in one of the event handler class... so if import us from the same event manager/db folder... What to do... Create the copy of the eventhandlers? OR should I not add Eventhandler.xml files to class files, I made the changes...

    (5) given that I need to create emails on the creation of the user while recon and identification of email updated as a first name or surname updates... I had to use in the event handler.xml (entity-type = 'User' operation = "CRΘER") or something else...


    Help me clarify my doubts...

    Yes, on the update post you need to be check first if the first and last name change to update the mail electronic id, rather then calculation always email identification. So, you can check the path name are updated through the previous code.

    -Marie

  • Doubt about appsutil.zip in R12

    Hi all
    I have doubts about the application of rapid Clone on 12.1.3.I the latest patches have applied the fix using adpatch. After that, it must synchronize directories appsutil
    in RDBMS oracle home. I created appsutil.zip in the application layer and copied in the RDBMS oracle home. If I move the old appsutil to appsutil.old and extract appsutil.zip, the new appsutil directory should not constituted by the context file (I think). So, I have to run the automatic configuration based on the old cotextfile. Below, I have summarized the steps that I follow. Please check and correct me if I'm wrong.

    Copy appsutil.zip to $INST_TOP/admin/out of RDBMS oracle home
    CP $CONTEXT_FILE /tmp/mytest_vis.xml
    MV appsutil appsutil.orig
    unzip appsutil.zip
    Run autoconfig based on/tmp/mytest_vis.xml.


    Thank you
    Jay

    Jay,

    Is there a reason why do not use the old file context? What is the difference between the context file that will be generated by adbldxml.pl and the old file context?

    If there are updates in the application, it will be updated in the new xml file generated by adbldxml.sh, but he's not in the old file.

    So it is always best to run adbldxml.sh and autoconfig.

    Amulya

  • Satellite Pro A120-107: Question about upgrade HARD drive

    Hello world

    I have a 120-107 I am generally satisfied but the hard drive is too small and I think the upgrade in about 100 GB. What should I look for when buying? Any suggestions on the best drive to get? Any help would be greatly appreciated thanks

    Hello

    "you just have to take care, that you buy a Sata Drive in the"form factor"2.5". That's all.
    As I know, the biggest that drive was delivered with this machine was a 120 GB SATA drive.

    Regarding the manufacturer: do not hesitate to take all the manufacturers that you like. The best would be Toshiba at all ;)

    Welcome them

  • Need suggestion about the optical drive for Satellite 5100 503

    Hello
    I have a little trouble with CD-RW/DVD for Toshiba Satellite 5100 503 drive. He writes about 1/5 CD - r and only if I write< 400mb="" of="" data.="" i="" tried="" cleaning="" the="" lens="" -="" no="" help.="" tried="" both="" win="" xp="" writing="" software="" and="" nero="" -="" no="">
    Do you know if I can replace the drive for a DVD burner? And if yes - which model?

    Hi Piotr,

    You can replace your new CD burner with vurtually any DVD burner that is the same physical size, but you should make sure that the new Recorder has a set-up similar to your current drive configuration.

    In general, the reader will be configured as Master, Slave and Cable Select (Csel), by the manufacturer and must match the configuration of your current player. One of the tools of Nero will show you the current drive configuration.

    Unfortunately, most retailers do not show configuration and with slim-line readers, there is no DIP switch that allows you to change it.

    Kind regards

  • Question about the graphics driver

    Okay so just close a week ago my laptop (ASUS K55a) has decided to freeze on me while I look a a video on youtube (essentially what I normally do after obtaining of reception class at night). After that, however, I turn on my laptop after forcing him to stop and while the mouse was mobile, I couldn't click on anything whatsoever. Its as if it was running, it took, the incredibly long just at startup and when he did, loading everything and takes a lot of time.  (I rebooted once a couple and even started in safe mode, nothing seemed to work)

    So the next day I decide the best option here is to reformat because I really can't do anything else to my knowledge base. After reformatting all, it seems to work very well, but here's the problem: whenever I try to install the graphics driver updated on the computer I get this error:

    He had what appeared to be some kind of basic graphic driver, but after searching for the name of this driver, the solution was that this particular driver was related to corruption. (Also to try to get windows to update this basic driver, he would sit there for about 10 minutes then would proceed in a BSOD).

    -If I run dxdiag.exe it shows s/o under the view tab

    -Graphics Card allegedly inside: Intel HD Graphics 4000

    -J' tried installing the following but it says that my computer does not meet the minimum requirements:

    Intel® Graphics Media Accelerator Driver, Windows 7 * 64, Windows Vista * 64 (zip)

    Data sheet:

    If someone knows the question here please let me know if there is anything, I can do to solve this problem, thank you!

    We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

    WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

    If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
    You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
    If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)
    To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
    The procedure:
    * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
    * Zip up the copy (compress)
    * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.
    Link to find out how to download below.
    To ensure the minidumps are enabled:
    * Click Start, in the search box, type: sysdm.cpl, press ENTER.
    * On the Advanced tab, click Startup and recovery... Settings button.
    * Make sure that automatically restart is unchecked.
    * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
    * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.
    Please also run MSinfo32 and download the output as well.
    To run MSinfo32 please go to start > run > MSinfo32
    Go to 'file', 'save' and download the PDF is saved with the DMP
    System specs are extremely useful then please include everything you know.

    Blue screen view and that crashed are often wrong and should only be used in case of emergency...

    Troubleshooting of Windows/source here
    You can learn more about BSOD here
    You will learn how to test your memory ici
    An effective question gets help more quick read how here
    Pilot auditor-stalking a GIS behave driver here

  • Some doubts about the navigation in unifying

    Hi all

    I had a few questions about unifying navigation.

    Is it possible to move the admin mode user mode access level?

    I mean, if a particular feature as Manager of the shell I can only access from admin mode is it possible to provide access even in user mode?

    If so, how?

    My 2nd question of doubt is, currently, we can access company BPs level "Journal of society" or "Resource Manager" under shell 'Company Workspace'.

    Is it possible to move the "journal of the society" or "Resource Manager" in the folder? If yes how?

    I tried in "navigation user mode" to move the company BPs level at shell of the House, but I can't do it.

    To answer your questions:

    (1) User-Mode browser can have the user feature included. You cannot change the view mode Admin or move functions admin for user mode.

    (2) you cannot move these on the Home tab.

  • Question about updating the driver for the graphics card Intel HD on satellite C series

    This keeps coming up when I use the 2.5 Update utility driver Intel (r)

    "A custom computer manufacturer driver is installed on your computer.
    The Intel Driver Update utility is not able to update the driver. Install a generic Intel driver
    instead of the custom computer manufacturer driver may cause technical problems.
    Contact your computer manufacturer for the latest driver for your computer.

    Should I change "Driver from the computer manufacturer custom" for the generic last by (a "driver Intel) - https://downloadcenter.intel.com/

    I'm looking for the option that gives the best fps

    Intel HD Graphics Info:
    http://prntscr.com/b6ujgb
    System information:
    http://prntscr.com/b6ukbs

    I have to install the driver manually, with exe it will not work.

    http://www.Intel.com/content/www/us/...000005629.html

    1. Download the graphics driver ZIP file. Unzip the file to a designated location or folder.
    2. Open the Device Manager:
    3. For Windows 8 and 8.1 Windows: press the Windows and X keys simultaneously.
    4. For Windows 10: Right mouse click on the Windows Start icon
    5. Click Yes when you are prompted for permission to the user account control.
    6. Expand the display of the maps section.
    7. Right click on the entry of Intel® graphics and select Update driver software.
    8. Click Browse my computer for driver software.
    9. Click Browse and select the directory where the driver files.
    10. Click Next. Drivers are being installed.
    11. Restart the computer when you are prompted.
  • Satellite P200-1BA - questions about the HARD drive RAM upgrade

    There is a 2nd internal HARD drive Bay, but not a female connector. Can I install it? How?
    There are 2 slots for RAM, all together 2 GB. Is it possible to exit an and instead place a token 2 GB to 3 GB total or should I always double channel pair RAM?

    It is not possible to install the second HARD drive. The laptop box is universal for all models P200, but some of them are delivered with 2 drives hard HDD upgrade is not possible.

    With the RAM modules, you can do what you want. To be more precise, YES! You can remove a 1 GB module and put 2 GB RAM. Please just use high quality Rams and not some products without name at low cost.

  • Satellite P100-160: Question about upgrade HARD drive

    Hello

    I would replace the internal hard drive to a larger size, but I don't know who is compatible.
    Here is a link to dabs where they have 5 hard drives, but not sure if they will work.

    Would be nice to get some tips on this thanks.
    I have a Satellite P100-160 that currently has a 120 GB hard drive, it is not enough!

    http://www.dabs.com/ProductList.aspx?&NavigationKey=11154&NavigationKe y = 50540 & key = 40970000 & CategorySelectedId = 11154 & PageMode = 1

    Hello

    I downloaded the user manual for this laptop from the Toshiba page and it says that you can use the 160 GB HARD drive.
    I think that he n t be a problem to use a bigger like 200 HDD or 250 GB.

    Sat P100 supports a SATA HDD controller and you should therefore use the HARD drive 2.5 SATA.

    Concerning

Maybe you are looking for

  • All of a sudden cannot receive email in Thunderbird

    I have not received an e-mail from last night, so I logged on the server and of course, there is send it waiting for me, but Thunderbird is not downloading, or I get an error pop-up messages displayed. My wife takes place also Thunderbird and his e-m

  • Why is the recommendation "Do not set a public DNS server in TCP/IP from DC settings."

    Read best practices for DNS on DC and domain member client settings suggests that you should; Contact your ISP and get the DNS IPs validates them and he adds forwarders, do not set a public DNS server in the TCP/IP from DC parameters I just wanted to

  • Photosmart 7350 and Win 7

    I have a photosmart 7350 and Win 7 ultimate, I installed the other driver Deskjet 5550 by HP support, but still no joy. (this driver does not work on Vista)

  • Sysprep with the answer file

    I used sysprep/Imagex without problem.  You wanted to change the default profile, so I went to windows 7 in Audit mode.  I created an answer file.  After sysprep when the pc enters the installation program, I see an error message about could not find

  • Antivirus for Black Berry 9530 blackBerry Smartphones

    What about virus for BB 9530? How about internet security for BB 9530? How about Trojan, etc... for BB 9530? What can I do to protect my information? What can I do to protect my data? Kaspersky, doesn't have any product for BB. If someone could recom