Doubts on the leaves of the platform supported between Tuxedo 12 c and OTMQ
Tuxedo team, Hi!
I was looking at the leaves of the platform supported on Tuxedo and OTMQ and I'm having a doubt as some point. In Tuxedo 12 platform leaves, it is said that RH Enterprise Linux is supported up to version 6.3, as indicated on the link below:
http://docs.Oracle.com/CD/E35855_01/Tuxedo/docs12c/install/inspds.html#wp1476309
Regarding the OTMQ, I expect the same platform supported, but discovered that it only supports RH Linux at 5.6, as indicated on the link below:
http://docs.Oracle.com/CD/E35855_01/otmq/docs12c/install/inspds.html
Is this good? What are the limits of the OTMQ on a RH 6.x?
Thank you
brunno Attorre
Hi Bruno.
OTMQ 12 c is currently supported by HR 5.6. There has been discussions of the approval process on later versions of RH Linux. Please contact Oracle support to save your application and let us know what version of Linux RH you are interested. Thank you
Deepak Goel
Oracle Tuxedo product management
Tags: Fusion Middleware
Similar Questions
-
Original title: cannot establish a network connection
Very well, a computer can connect to the internet. Another computer using the same modem cable and fixed connection of the router (for example using the port adapter, not wireless) Wireless does not connect. I suspect that there are has some settings somewhere that are not correct. Can you tell me how to understand where is the problem?
Messages on the icon alternate between "Acquiring network address" and "unplugged network cable. When I run troubleshooting this is what I get:Diagnosis of IP Configuration
Invalid IP address
Info
Zero (0.0.0.0) detected IP address
action
Auto repair: renew the IP address
action
Release the current IP address...
action
Successfully published the current IP address
action
Renew the IP address...
error
Error to renew the IP address: the semaphore timeout period has expired.
Info
AutoNet address detected: 169.254.225.103
action
Auto repair: reset the network connection
action
Disabling the network card
action
Activation of the card network
Info
Successfully activated network adapter
Info
Zero (0.0.0.0) detected IP address
action
Repair Manual: Reboot modem
Info
AutoNet address detected: 169.254.225.103
action
Auto repair: renew the IP address
action
Release the current IP address...
action
Successfully published the current IP address
action
Renew the IP address...
error
Error to renew the IP address: the semaphore timeout period has expired.
Info
AutoNet address detected: 169.254.225.103
Info
Redirect the user to support call
WinSock status
Info
All base service provider entries are present in the Winsock Catalog.
Info
Winsock Service providers strings are valid.
Info
Entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.
Info
Entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.
Info
Entry provider RSVP UDP Service Provider managed the loopback communication test.
Info
Entry provider RSVP TCP Service Provider passed the loopback communication test.
Info
Connectivity is valid for all Winsock service providers.
Diagnosis of network adapter
Network location detection
Info
Using the Internet connection at home
Identification of network adapter
Info
Network connection: name = Local 2, Device network connection = Intel(r) 82562V-2 10/100 Network Connection, MediaType = LAN, type = LAN
Info
Ethernet connection selected
State of the network adapter
Info
The network connection status: connected
HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivity
warn
FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
warn
HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
warn
HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
warn
HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
warn
FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
warn
HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
error
Could not make an HTTP connection.
error
Could not make an HTTPS connection.
error
Could not make an FTP connection.
I found the problem (s), even if I am always left with a few questions.
During this process, I have disabled the firewall, but that did not help. However, I noticed 'tweaks' accessed via the tab 'Advanced' in 'Microsoft Firewall' which looked like, they must be checked in order to access the internet. I checked these and reintroduced the firewall. After I got things working, I unchecked them and things still worked so I obviously don't understand what these parameters.
The solution:
(1) I have to go straight from the modem cable to the computer. I can't have a cable modem, router wireless, computer, even if using hard wire, and even if this same configuration works with another computer. Also, I can't use a cable length to go from modem to the computer. So, it seems to have had a problem of cable length. Power problem? Only connected to this computer devices are the mouse, the keyboard and the Ethernet. Would not this be fixed with an upgrade of the power supply? Or is it due to the quality of the Ethernet hardware on the motherboard? It's a Dell Vostro 200.
(2) in back and forth between configurations while following the problem, you must think to unplug the modem to reset between each configuration. You may have stumbled upon the solution, otherwise he's not shot. Also, I unplugged the cable from the modem when you reset data cable - do not know if it was necessary. I wanted to limit the degrees of freedom that I had a lot, as it was.
-
What is the main difference between VMware vSphere 4 and VMware Infrastructure 3
Hello friends,
What is the main difference between VMware vSphere 4 and VMware Infrastructure 3?
Kind regards
Mustafa Rashid
Take a look at the following documents, there are so many out there:
http://communities.VMware.com/community/VMTN/vSphere (there is a new features pdf doc)
http://blogs.VMware.com/VMTN/vmware_infrastructure_3/
http://www.VMware.com/products/vSphere/small-business/features.html
http://www.yellow-bricks.com/2009/04/21/vSphere-linkage/
Here twopages which shows some of the different features and takes what licenses are supported which: http://www.vmware.com/products/vsphere/buy/editions_comparison.html and http://www.vmware.com/products/vi/buy.html
Yet once if you just browse some of these links, you will get everything you are looking for and the wait is the product GA will tomorrow so look on release notes, etc.
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
If you find this information useful, please give points to "correct" or "useful".
-
In the latest version of MF, there is a missing button, who was in the previous version: between backward/forward buttons and the bar hits there was little flash, who showed a few recent pages I just went through. How can I restore it?
If you mean the drop marker so you can always get history buttons front and rear, if necessary by left clicking and for a second, or by right-clicking on them.
If you want to continue the brand drop there too there is that Extension to https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
Also the abbreviation for Firefox is Fx
-
I am trying to download Windows Live, but I get the message that I need to update platform for Windows Vista (KB971644)
I need to find a download site for this update, all I get is a run around using different sites but no download.It must be downloaded by Windows Update. Service Pack 2 must be installed as a prerequisite.
Look at the history of update for updates failed which can block it.
There are four parts of the update of the platform, each with a separate download. Follow the link for your version of Vista in the following articles:
-
The B326HK supports HDCP on all or part of its connections? Which? All are supported HDCP version 2.2? I read on Internet websites many dealers some version of it is taken in charge on DVI, but no comment on HDMI, DisplayPort and Mini DisplayPort. In conflict with these sites, product specification for the Acer online store reports that HDCP is not supported. (http://us-store.acer.com/b326hk-ymjdpphz-monitor) I want to be able to read encrypted Blu - ray discs (and later, if possible, 4 K Blu - ray disc) for my desktop computer through the display via HDMI, DisplayPort or Mini DisplayPort.
cyclicgraph,
Other research shows that all the digital inputs may support HDCP, so DVI, HDMI/MHL, miniDP and DP.
-
The main difference between T400 (2765 - 32G) and T500 (2243 - 64G)
Hi, someone can describe the main differences between these 2 lenovo GST. I choose between these two. Any advice would be beneficial. Kenneth
The t400 you watch is CCFL and the T500 is LED backlite, I noticed the LED screens are a little more usable and need to improve your battery a little.
2 additional questions:
1 read the info product how can I determine who has the ccfl compared to the led... I tried but have not found.
2. I also have a t400 6474-wnp is similar to 2765 - 32 g?
THX kenneth
-
What is the main differences between version 6.5 and 11 for essabes?
Hi all
Can someone list me the differences between the version 6.4 essabase and 11 for essabe?
Thank you
HariASO
If you want differences, have a presentation tool that will tell you the difference of 9.3 from:-https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1092114.1
If not check the documentation for the new feature Articles:-https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1092114.1See you soon
John
http://John-Goodwin.blogspot.com/ -
Hallo,
I use the following system:
- OR PXI-1044 with controller NI PXI-8109
- OR PXI-2564 switch module to turn on the monitor of my test device
- Data acquisition multifunction NI PXI-6259 to measure the signal that responded to the questionnaire jump
The two cards are the same - PXI trigger bus. For both, PXI-2564 and PXI-6259 I use DAQmx to set the reading and writing of the channels.
Now, I want to measure the time between the digital output, my unit turns and the analog input, which measures the response of my system.
I can't do work by myself, please help me!
I thank Ludwig.
Hi Ludwig,.
If you can't give us any VI we have difficulties with to help you.
Because I Donat knowledge how your program is mounted it is not easy to know where you should enter signals.
Here's a question similar to yours:
http://forums.NI.com/T5/LabVIEW/best-way-to-measure-time/TD-p/178704
and 2 external links:
http://www.ehow.com/how_8698983_measure-time-LabVIEW.html
http://objectmix.com/LabVIEW/385152-how-can-i-use-LabVIEW-measure-time-between-analog-pulses.html
-
Why my network maps in Vista see the a switch between a laptop computer and a router?
Theres no physical spend there? Why doesn't it appear on the other laptop that is running vista also? What is a switch? Can I get rid of him? It just says: switch I can't get any other information.
Hello
It can be generated by 3rd party Firewall like Norton 360 (combinations of security).
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
-
Well Im trying to download Windows Live Essentials, basically just the Messenger because MSN gave me problems and I had to keep re - install, now it says I need the update of the platform. I checked Windows Update and looked for anything that involved in the update of the platform and found nothing. So I'm quite confused, can someone help me?
The update of the Vista platform consists of four updates KB971512, KB97513, KB971514 and KB960362.
http://support.Microsoft.com/kb/971644
It should be installed through Windows Update.
-
Original title: I get a box indicating the dell support center has stopped working and microsoft has closed the program in order to seek a solution, then nothing happens, and the box comes up again and again?
I get a box on screen telling me that the dell Center support has stopped working, and microsoft has completed the program to check the solution
It happens every 5 minutes but never comes up with a solution
Hello
Refer to this article and follow the steps to help solve this problem.
Dell Support Center has stopped working error appears
http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=427832 -
The update of Windows 8 for Vista and XP is gone! Why it has been deleted
The update of Windows 8 for Vista and XP is gone! Why it has been deleted
Moved to install Vista, upgrade, and activate Forum.
http://Support2.Microsoft.com/GP/lifewinfaq
7. What is the policy of the policy of Support for Windows 8.1?
Windows 8.1 is part of the same strategy of life cycle of Windows 8 and reaches the end of the main Support on 9 January 2018 and phase end of Support extended on 10 January 2023. With availability General Windows 8.1, customers on Windows 8 2 years, until January 12, 2016, to move to Windows 8.1 to be taken in charge.
See you soon.
-
Original title: unable to play any DVD
"Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.
I tried to update all the drivers but the problem persists
Hi Neil,
1. have you made any hardware changes or software on the computer before this problem?
2. what version of windows Media Player do you use?
You can follow this link & check if the problem persists.
Windows Media Player Error Message help
Reference: How to troubleshoot issues that occur when you play a DVD in Windows XP?Hope the helps of information.
Please post back and we do know. -
Hello, thanks for reading and helping me.
I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional. The DVD worked a few days ago, but all of a sudden, I get the following error message:
"Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.
I did a lot of research of these forums and on the ' net. Here are the suggested steps I tried without success:
- I tried VLC player. This works. However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
- I tried several DVD for years over the last decade. These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
- I uninstalled my Shark 007 codec
- I tried other codecs (K-Lite)
- I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
- I tried to uninstall Nero 9
- I tried to use the Windows 7 troubleshooting options:
- > Reading and burning CD, DVD and Blu - ray (no problem)
- > Windows Media Player DVD (no problem)
- > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
- A system restore to a time when the DVD was working did not resolve the issue
- The different links in Microsoft, I found in this forum about this problem do not seem to be useful. There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
- I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
- I assured that the latest firmware is installed directly from the manufacturer's website.
- I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
- I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.
I would be very grateful if a Microsoft technology could chime. Thanks for your help!
MY COMPUTER:
DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
Graphics card: XFX ATI Radeon 5850 Black
Motherboard: Gigabyte GA-X58A-UD3R
Processor: Intel i7-920-Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case
Hello
Try this free program:
http://www.DVDFab.com/passkey-Lite.htm
Carlos
Maybe you are looking for
-
Where can I find the firefox_21.exe?
I'm tired of trying to get an extension which is my coming roboform toolbar I want firefox_21.exe, so I can release this version stub22 unwanted desktop firefox! My email address is: (Email removed by mod)
-
Quick Launch for the DV6-1230us buttons do not work
The QLB for volume control and mute on dv6-1230us running Windows 7 do not work. I installed the sp48159 driver, but it was no problem.
-
<; Closed >; Moto Android E 5.0 L
When Android Rollout for motorcycle L E (XT1022) in India?
-
Import a dvr great ms movie maker
I try to import a large file of DVR MS in Movie Maker, the file is 9.21 Go. The system is Windows XP 2002, when I try to drag the file across it won't spend. When I try to import the file it does not, even though I have selected the correct folder an
-
Why not the Acer Empowering Technology for the launch of Windows Vista Home Premium SP2?
Hello! I have Windows Vista Home Premium SP2 in an Acer Aspire 5920 G I installed Acer Empowering Technology, but the program does not start and a message that a problem caused the program to close and Windows will advise you if a solution is found.