Down 3 of my screen is empty

Similar Questions

• Satellite P100-347 screen is empty

  Hello

  I have the laptop above for about two years, running Windows XP. Recently, and with increasing frequency, the screen is empty. It remains illuminated and the laptop still works, with his work.

  I have eliminated I thought initially cause overheating. He responded to be switched off and left for a while. But now he does after being down for about 30 minutes. Does not appear to be linked to any particular process that I can identify. None of the new programs installed. Run all my virus protection and it seems clear there.

  Any ideas?

  Shost

  Hmm maybe there something wrong with the graphics chip?
  Have you tried to update the graphics driver from the Toshiba page?
  You use the latest version of the BIOS for this model of laptop computer?

  Please check these two updates and check if the parts are updated!

  Sorry for this universal advice, but these are strange and it s still very difficult to say what might cause such problems

  Good luck

• Satellite A300-08W: sometimes screen is empty

  Hello world.

  I'm sure it's a model 08W, he the PM45 chipset and intel processor T9400 and Toshiba support person said it was a model 08W although there do not know the full details of it.

  Problem is every time (not all the time), I let the PC, sometimes the screen turns off (almost black, just lighter I think) and seems to be in standby mode, and it is located in power options advanced when the PC is plugged in which it is, but when I click on the mouse or any other button on the PC the screen remains empty. Nothing happens. A voice began to speak when I hit a button after pressing all the keys, trying to get something to work but does not load windws to its previous state, I shut down the computer manually.

  Happens also when I close the lid on the PC, but when I opened the cover to the top of the screen seems to be black rather than just a minute touch more light than black, as this is when the screen is opened, is the only small difference.

  This computer was once before the PC had bad sectors the HD and HD has been replaced with Vista reloaded but this continues to be. Also I just remembered that some gel applications such as for example, or the other day, my external sound card did not close, seems to be when iam trying to get out of the programs, I can always use other programs or explore other browsers but when the program crashes I can't closed it anyway, either via the Task Manager or by closing the program down throiugh the program itself.

  If I try and shut down the computer through the start bar Windows Vista never stops on its off State, it's just seems to remain at some point through the stop, do not know if there are different points... I have to manually shut down the PC.

  I have windows Vista Home Edition, if you need any other information please let me know, but I think that's all...

  Lee.

  Hello

  > Problem is every time (not all the time), I let the PC, sometimes the screen turns off (almost black, just lighter I think) and seems to be in standby mode, and it is located in power options advanced when the PC is plugged in which it is, but when I click on the mouse or any other button on the PC the screen remains empty. Nothing happens.

  I put t know if you tried to update some parts but I recommend strongly the update the BIOS and the driver display both parties should be placed on the European driver Toshiba and of many such cases, these updates help page

  Check it & good luck!

• the preferences screen is empty

  On Firefox for Mac 41.01.1, the preferences screen is empty for most of the tabs: Applications, privacy, security, synchronization and advanced. Research in the preferences and general tabs seem to work normally. I upgraded to 10.11 of the OS, but I have had this problem since the previous version of Firefox at 10.10.

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an addon intrudes here...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• iPad - I forgot to turn off my screen before cleaning, and now the police is so great that I can't narrow it down to access the screen.

  iPad - I forgot to turn off my screen before cleaning, and now the police is so great that I can't narrow it down to access the screen.

  James,

  Double-tap the screen with three fingers and then go to settings > general > accessibility >... put the Zoom wide.

  

• I use an IPhone 5. My screen is empty. White color. Calls from if composed of a different number, but cannot respond. What can I do to fix this?

  I use an IPhone 5. My screen is empty. White color. Calls from if composed of a different number, but cannot respond. What can I do to fix this?

  Have you tried to reset the device? Keep holding the home and power buttons at the same time and continue to hold until the Apple appears (compared to 30 seconds - really). If you see the Apple, the reset is progressing and the Slide to Unlock screen will display shortly.

  See you soon,.

  GB

• Equium A300D - after updating the BIOS screen is empty

  Hi, I did a bios update on my Equium A300D-PSAK2E and its bricks of my laptop! When it restarts after update screen is empty!

  Is there a a sort of way to launch a recovery of bios by pressing certain keys on the power on the image of the bios on a USB?

  Kind regards

  Dan

  Hi Dan,.

  Unfortunately I think that there is nothing you can do if the BIOS update gone wrong... In this case the ROM module must be reflashed to an authorized service because guys have special tools to do this process delicate reflash.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

• Re: TV TOSHIBA 26EL800A - TV is on, but the screen remains empty

  Hi all

  I have a Toshiba TV 26EL800A purchased in May of this year. Tried to turn on the TV using the remote control mode standby (red light) to on (green light) that has the remote control - the screen remains empty (as there is no power) and after a few seconds the light changes again red - standby again.

  Tried this using the keys on the TV as well and the same thing (have checked batteries for remote control, checked PowerPoint (my dvd player works the same record 2 and it works) but don't know what else is causing the screen lights?)

  Any suggestions?

  I put t really know if you can find the solution here on the computer systems forum.
  What you can try is to unplug TV, leave for a while and check again.

  If the same thing will happen again and again I recommend to contact your local dealer and ask for help or contact the provider of Toshiba directly.

• Satellite P30 - 133 - internal screen is empty

  Hello everyone.

  I have a satellite P30-133 with a white screen, everything works fine.

  When I plug it into my computer screen but the laptop screen remains empty, any ideas?

  Thanks in advance. Steve.

  Hello!

  Press FN + F5 to switch between monitors.
  Check if you have the same problem on startup and in the BIOS.

  In the worst cases, you should go to a local ASP. Technicians must check your parts for laptop and trade if it of necessary.

  Good bye

• Regulation the screen showing empty in iphone 5 s

  My settings > General > regulatory screen showing empty (check screenshot below) is there someone tell me why it's like that

  

  It may be a bug or something like that. Try restarting/resetting your phone. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• When the phone wakes up or after a call home screen is empty

  This has happened for a while, but I have yet to see discussed here. When I finish a phone call or wake up my phone or quit an application, the home screen is empty except for my wallpaper. All of my icons, including the row House, will be gone. Sometimes for a few seconds, sometimes it would stay that way until I did a battery pull. I found a way to fight against it, but that gets boring. The way to counter, it is by sliding upward on the screen to bring up the options of 3 profile, which brings usually return to normal. Any ideas? Thanks in advance.

  This looks like some serious lag for me. You can try to install an application cache cleaner and see if things improve. I use the Cache Cleaner by Jova. It seems to work pretty well. Whenever my phone seems to be taking it's sweet time to do the things that I just use Cache Cleaner and the phone speeds up immediately. I hope this helps.

• I'm trying to re - install windows xp. I get regarding the selection of CD/DVD to install (enter), then I press any (I have not pressed a key any), screen is empty, and that's all.

  My first attempt seemed to work although I don't not re-install all the drivers at this time here.  When I then turned on computer, I got a white screen.  I took advice and tried to install xp again.  I get regarding the selection of CD/DVD to install (enter), then I press any (I have not pressed a key any), screen is empty, and that's all.

  Hello

  It seems that this computer is not able to detect the drive. Use the steps described in the article mentioned below to clean the disk, and then try to install XP.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  If you are able to boot to the desktop without inserting the disc, please perform a flat installation.

  How to perform a flat Installation of Flat copy CD to hard drive:
  http://support.Microsoft.com/kb/294727

• I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remained blank.__How can I go back to single screen? __

  I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remains blank.
  How can I go back to single screen?

  Hi Bilipino,

  You have more than one display card? Try to connect your monitor to the another card and see if you can get the display.

  Reference: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/monitors.mspx

  I hope this helps...

• Intermittently, he goes down with a black screen provides the following information: Boot from CD

  I have a Dell Inspiron 530 running with Windows Vista.  Intermittently, he falls down with a black screen provides the following information:

  Boot from CD

  Client MAC addr: 00 ID 09 88 CE 06

  GUID FFFFFFFF FFFF FFFF FFFF FFFFFFFFFFFF DHCP *.

  PXE - E53: no boot file received

  PXE - M0F leaving Intel Boot Agent

  No available boot device - retype press to try

  To the point where I have indicated the asterisk above, it has a slash which rotates in a circular motion.

  My thought is that it's either the Windows code is corrupted or is a hardware failure.  While I am not positive, I feel that it occurs when Internet Explorer is used.   System Restore is not enabled on this computer, so this isn't an option.  Can someone help me understand this means and how I could fix this?  I know that will later Windows version can solve it, but this isn't the answer I'm looking for.  Thank you

  Attempt to initialize the network is not a 'possible', it is certain that your PC is doing exactly this depending on your BIOS settings. In addition, she tries the network initialization after already trying to start on an optical disc. The two attempts at device boot doesn't have, in all likelihood after having already failed the boot from the hard drive. There is no message to indicate than an attempt to boot to the hard drive, or he leaves the screen too fast to see you or you did not save it in your original post.

  My advice on the diagnosis is based on the studied the real model of your PC, not generic advice for all Dell PC with Vista installed.

  1. Your computer has already finished POST (Power O n Self TEST) otherwise you wouldn't see any attempt to start at all.
  2. You've already provided specific error messages.
  3. I have already advised the best and most approriate diagnostics for your PC.
  4. Your PC will not start in any mode if it becomes a default 'hard', rather than the intermittent fault means your original message. Start in any mode, you can and make a backup as soon as possible.
  5. Unless these recent changes include adjustments to the BIOS settings, they are irrelevant, that he is a boot failure which can be caused by anything done under Vista.
  6. Removing the external devices is never a bad step of troubleshooting if you encounter problems. I doubt it will help in this instance, but it will not hurt to try, especially if they are peripheral bootable.
  7. Startup Repair will not solve a hardware problem (by far the most likley scenario).
  8. System Restore is not usable unless you can actually start to Vista and it's never going to treat problems of material.
  9. IMO, this is not a software issue. See also point 4.
  10. If you have a hard drive failure, it is not recommended to try to reinstall the operating system. First of all prove that the hard drive is OK as advised before trying to re-setup. In addition, if you can, back up your data before reinstalling the operating system. In all likelihood, that's what you have to do but for a hard drive replacement.

  I repeat that a failing or failed hard drive is the most likely scenario. Other more distant possibilities include

  • A failed or failing disk controller (almost certainly on the motherboard)
  • Boot from the hard drive is disabled in the BIOS (highly unlikely if this anomaly is intermittent)
  • Some sort of weird for the failure of the BIOS
  • Option 3 mentioned in the previous post (unlikely unless your PC has been internally inspected/modified or subject to vibration displacement/hitting more/remove etc..)

• Since the upgrade to windows 8.1 my webcam/camera screen is empty

  Since the upgrade to windows 8.1 my webcam/camera screen is empty. The light on the cover but no picture. Help...

  Did you open her camer app which is part of Windows 8.1?  Have you installed the driver for the webcam?

  Windows 8.1 Webcam help

  http://Windows.Microsoft.com/en-us/Windows-8/camera-app-FAQ

  It would help if you identified your laptop with its full product name or product number.

  1. the full name of the model. or product number. the laptop - see web document this HP if you do not know how to locate the product number or model number.

  2. the full version and the name of the operating system you use (IE Windows 7 64-bit).

  3 see. you an error message or code blink?

  5 post the processor and chipset installed if you know

  4. is your laptop still under warranty?  Check the status of your warranty here.