Down, I can't load KB2691441 - C 8007371 error

Similar Questions

• I can not load forgotten that an error message appears

  C:\DOCUME~1\COMPAQ~1\Locals~1\Temp\c367_appcompat.txt that's my error report. When I try to load forgotten that an error message appears and the wont let me play. and it does on my build for forgotten also. all my other games just not work it and I installed the latest version of directx and still no access. Please help me I miss my game

  -------------------

• can't load games run time error list index out of bounds

  I support the game
  Go through acceptance, for example windows next
  is the end and the foregoing notice arrives ' runtime error 62:2395 list index out of bounds ".

  I always downloaded from this show and didn't have problems now

  Hi Terrinicholson,

  1. what game you are trying to download?

  2. what web browser do you use?

  3. This only happens with a specific Web site?

  4. have you made a recent software or hardware changes to the system?

  If you use Internet Explorer, you can read the following article and check if it helps:

  The problems of games online using Internet Explorer

• have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.

  How do you try to install the driver? Is it through the disc or via the site?

  Method 1: Use a troubleshooting tool to solve the problem:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: temporarily Disable the Antivirus and firewall and try to install

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

• Sprocket: My gear don't power down and can not pair on my mobile device. How to solve this problem?

  Hey everybody,

  My pinion don't power down and can not pair on my mobile device.  How to solve this problem?

  Thank you

  Bill

  Hi Bill,

  This should solve your problem!

  1. Locate the reset button near the port of loading.

  

  2. Insert gently a needle into the reset button access point and press the reset for 3 seconds button.  Resetting the printer and everything already illuminated turn off the LED.

  3. turn on the printer by pressing the power button until the white LED lights

• Can not load Iphone 6 Plus with Yoga2Pro

  Comments, said the port USB 2 was a port ' always on ', but I can't load my Iphone 6 more if the computer is in standby or off.

  I can load only if the computer is on and not asleep. I tried the various "power management" parameters, but it does make a difference. Any help would be appreciated.

  James

  Follow-up...

  I'm still rebuilding my Y2P, but try this:

  -Go to the start screen

  -Start typing "energy Manager" and select it.

  -From the application (open on the desktop), expand the interface (button at the top right of the gauge).

  -Select the tab "settings".

  -Flip "on" option "load USB".

  -Put your Y2P standby and then try to charge your phone.

  -2nd test, completely shut down your computer and try to charge your phone.

  The two tests work perfectly on my my Samsung Galaxy S3 of load Y2P.

  I hope this helps.

  Kind regards.

• files and folders: How can I load all my files and folders to my new account of my external hard drive?

  Who can help, I just put a new account on my computer and deleted the old account. I backed up the old files on my external hard drive. I want to know is how can I load all my files and folders to my new account of my external hard drive? I thank you for your time and knowledge have a very nice evening, Shawn

  Because it's a new account (even if with the same name), the restore procedure is unable to put files and folders in the same place, they came (because this place technically no longer - if yes, then the process is done and the transfer is complete). It can create a set of separate files (maybe even under a new user name, if it has been stored in this way).  If so, all you need to do is copy the data as you would copy any other files and folders (not the main files of the user profile themselves but the data in them) on the new files in your user account and who will take care of the transfer. Here is more information about the restore procedure which may help you in the process.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I load windows vista or 7 on this PowerEdge 840?

  Hey guys, first time, coming through a device like this. PowerEdge 840

  Serial number: Service tag removed by privacy policy > | Express service code: abducted by the Express service code privacy policy >

  I read the manual, but still confused, can I load win7 on this machine? It can work as any ordinary windows machine?

  So I went into the boot options and selected the dvd as the first player, but it just goes straight to windows server 2003. Something up with this device in any case, whenever I have manually close it restarts and the fan is very noisy? Is this way, it is supposed to work, or it is supposed to be silent?

  There is 3x73GB readers in this machine and there is 2 pci cards connected to a smal circuit located at the rear of the 3 HARD drive, what can I do here in order to bypass this RAID system to connect a HARD drive to load windows OS please?

  The connector on the disks look like regular SATA connectors but the description on the Maxtor disk reads:

  ATLAS 10K V, 3.5 SERIES

  73 GB Serial Attached SCSI

  They are not SATA disks? If not and I can use a SATA drive, do I have to remove 3 disks and place a SATA drive in one of the slots?

  herbertsherpa

  I read the manual, but still confused, can I load win7 on this machine? It can work as any ordinary windows machine?

  You might be able to install Windows 7, but NO server has been tested and validated to run no matter WHAT client operating system. They are tested and developed for the server operating system. That said, it doesn't mean it won't work, but you will need to use the drivers 2008R2.

  herbertsherpa

  So I went into the boot options and selected the dvd as the first player, but it just goes straight to windows server 2003. Something up with this device in any case, whenever I have manually close it restarts and the fan is very noisy? Is this way, it is supposed to work, or it is supposed to be silent?

  Servers are not supposed to be quiet, but as part of the POST, the fans turn loudly when first energized. If they do not ramp down to a 'normal' speed, there may be a problem with the fans, sensors or environment (or the lid can be turned off).

  Make sure there is a check mark next to the DVD drive... means it is enabled. Also, how did you create your Windows media?

  herbertsherpa

  There is 3x73GB readers in this machine and there is 2 pci cards connected to a smal circuit located at the rear of the 3 HARD drive, what can I do here in order to bypass this RAID system to connect a HARD drive to load windows OS please?

  You can install Windows with a RAID System... you just need drivers. What model of controller RAID do you have?

  herbertsherpa

  The connector on the disks look like regular SATA connectors but the description on the Maxtor disk reads:

  ATLAS 10K V, 3.5 SERIES

  73 GB Serial Attached SCSI

  They are not SATA disks? If not and I can use a SATA drive, do I have to remove 3 disks and place a SATA drive in one of the slots?

  SAS (Serial Attached SCSI) are not the SATA drives, but SAS controllers/cables/funds of basket are 'retro' - compatible with SATA. You CAN put SATA drives out there, but it won't change anything. Windows will treat it the same. Windows only communicates with the controller, not directly with the player.

• Limiting the size of data that can be loaded up via BES (JSR - 172 or kSOAP2 is used)

  Hi all

  I want to up load data from the device to the application server. (via BES)

  I use JSR-172 or kSOAP2 high-load it.

  Is there a limitation in the size of the data that can be loaded at the top?

  Hello

  as far as I know, they're just the protocols/utils. They help you define the message format, the specification on how you are going to write/read data and tastes. so I think that all this goes down to the http.

• I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that no such interface supported.

  I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that: {26EE0668-A00A-44D7-9371-BEB064C98683} not this interface supported...

  Hi MAMARDA,

  Welcome to the Microsoft Vista answers Forum!

  I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

  (a) what version of Windows 7 use you?

  (b) what is the exact error message you are getting?

  Method 1: You can also try to perform a file system (scan SFC) verification tool. This tool will fix the system files are corrupted.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  Method 2: If this is a recent problem that has developed you can try to perform a system restore and check if it works very well.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Method 3: you can try to start safe mode and restore the system, if you are unable to do it in normal mode.

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  When you are in safe mode, follow the steps mentioned above to complete the restore of the system.

  Hope the helps of information.
  Please post back and we do know.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Accidentally, I put my virtual machine - Windows 7 - 4 MB RAM, and now I can't load and stop it!

  Accidentally, I put my virtual machine - Windows 7 - 4 MB RAM, and now I can't load and stop it!
  My Windows 7 virtual is stuck in start mode of Windows, but not I can't start it, nor can I stop to change the RAM to return to normal. Help! What can I do now?

  I use Macbook Air if it is useful and WM ware Fusion 6.0.3

  Hi Requiem88,

  Just to be clear, you press the Option key on the keyboard key then went in the Virtual Machine menu at the top of the screen and choose Force Shut Down who?  Looks like you force quit in the menu Apple have rather choose.  Force quit will put end to VMware Fusion, while the option Force stop menu stop permanently from Windows itself.

  See you soon,.

  --

  Darius

• If AI CS3 can be loaded on two computers?

  I am currently using AI CS3 in my office at home in the design of the images.  I have to download the images to an external hard drive, take down to my laser workstation and download pictures on my other pc, then open them with inkscape to send it to my laser to cut out.  My question... I can be loaded on two computers?  I know that WHEN I bought it said one computer only, but it's not as if I had a company where several designers will use.

  Thanks for your help!

  Joe

  As long as they are not in simultaneous use, then you have loaded on two computers.

• Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  What specific mouse?

• I recently built a new computer, and I can't load all affiliated with this subject google sites.

  OK, this is really weird, I'm building a new computer and everything it works, BUT I can not load most of the site of google and a bunch of other sites at random.
  I can load this website, twitter, my hotmail, just about everything else.
  I can load some google searches, but not sites which is redirects to.
  not youtube.
  I already have turned off of proxies, cleared the cache, cookies, clear history, rebooted several times, tried in IE, tried in Safe Mode.
  It is not my internet because I can load on my phone and fine sites old computer.
  It gives me the error message "connection to the server was reset while the page is loading.
  What is going on?!

  I thought about it.
  something was wrong with my Hamachi client and caused all sorts of weird things.

  I uninstalled it and everything works fine now

• How many audio books can be loaded into iTunes 12?

  How many audio books can be loaded into iTunes 12?

  I don't have audio books, but all the time I've been here I don't remember someone mention a limit.  More your slowest library that is fine, but there are people with > 60 000 items in their libraries.