downconvert

Similar Questions

• How can I control the NOR-5663 downconvert

  Hi, how are you doing.

  I have a NOR-5663, I want to make it as a spectrum analyzer.

  I need to deal with the problem of RF image. I work with Labview 2009.

  so I need independently control the downconvert of NOR-5663. Can I use OR - Tuner for Drevier?

  DAMA is maybe good enough for my work, like soft façade nor-DAMA, but I don't know how is it?

  Thanks for your help

  Charles

  Hello!

  You can not use NI Tuner tuner 5601 (no traditional DAQ support) but use the driver of the ACCA and use it with external digitizer option.

  hope this can help you

  see this example: http://decibel.ni.com/content/docs/DOC-1980

  concerning

• LabVIEW how downconvert with labview 2009

  I am not a miracle solution, I tried to download my screws on this Web site to convert my 9.0 to 8.6.

  What is the best way to achieve this?  I have about 50-100 screws that need to be converted.

  What is the MAX upload on the conversion table?  I got 12 MB and it was over, but id has not shown what was the max.

  Thank you

  If it's that big, you're probably better to download the demo version of LabVIEW and do it yourself. The jury of the Conversion of the Version was not really intended to downconvert major projects.

• Black bars when downconverting HD to SD

  I try to use Media Encoder CS5.5 downconvert a clip HD (1920 x 1080) DV PAL anamorphic (720 x 576).

  However it seems that 2 choice for me in the menu of export with regard to the format of the pixels.

  By selecting D1/DV PAL, the exported clip is a 4:3 letterbox video - that is not what I want.

  By selecting PAL D1/DV widescreen, the exported clip is almost correct anamorphic video.

  I say 'almost-correct' because there are narrow black bars on the left and right of the exported element.

  The image below shows the preview of the clip exported (with black bars on the side)

  No one knows the reason for the black bars on the sides? And how do I get rid of them.

  Thank you.

  

  On the Source tab, click crop to turn on cropping. Define upper and lower to 14 pixels. Which will allow the video to fill in correctly the destination image size.

  Has to do with the format of the pixels and there are differences in proportions between HD and SD (wide screen).

• downconvert LV2011 LV2010 issues

  Hello

  I have this VI which was written in LV2011, now, I just LV2010 to work. Yesterday, I reduced to LV 2010, but now it doesn´t work... Can someone help me out here please?

  Best regards

  Well, we can execute your code, and we can not see in your computer, so that we cannot see what the data is, then you will need to make your own debugging. Run the VI with highlight mode on and the use of sensors to study values on some threads to find what part "isn't fair".

• I can downconvert an entire project to SD?

  Hello

  I have a project that began as a project of Sony XDCam, 720 p 60 fps and now we have added a few pictures of the mini dv. Is there a way to convert the whole project to the DD. I can convert mini dv images, but would prefer to shoot HD images. I'm in first Pro CS3. Any ideas or comments are appreciated.

  Thank you

  Scott

  Create a new sequence in SD resolution, embed your HD movie in there and use the motion effect to reduce to the SD resolution.

• Downconverting HDV 1080i DV

  I just searched the Forum (he must have been covered many times before) but can't find what I'm looking for.  I just started to learn AE so apologies in advance...

  I work with HDV 10801 footage in Premiere Pro and have been informed that EI will make a much better downconversion for DV.

  Could someone tell me please in the right direction for the appropriate workflow?

  Thank you very much

  Julian

  Julian: There was a small piece of information in my head that I wanted to share everything with you, but I had to check if it was OK (the worst possible crime is to reveal features that do not exist!)

  So, as much as I like to think that AE is the universal remedy for every problem (!) image processing, I wanted you to know that, beginning with the 4.01 update and before, Premiere Pro CS4 has a new option settings of sequence called "Maximum rendering quality. This means "scaling quality. If you use this version of Premiere Pro, you should get very good quality downscaling (at a cost at the time of rendering, but you've imagined, haven't you?)

• ITunes can import 24-bit audio files?

  Hello

  I've been looking for the right settings import audio files in 20 bit and 24 bit. Is there anyone who can tell me if iTunes is able to import these files without quality loss?

  I am desperately looking for a response on the internet and nobody seems to know (or care?).

  Thanks for any response, Marc

  iTunes will downconvert to 16 bits, if you convert the files.  I use Enqueue or VLC to read files that I don't want to convert.  There is a free app on the App Store called FLACTunes that allows to convert to Apple Lossles, but she too back.  It was an application named Fluke that would allow iTunes to play FLAC not converted. I have but it is buggy and I don't know if it is still supported.

• HP Pavilion p7 - 1436 s Desktop P: may update this Galaxy NVIDIA Geforce GT 740 card 2 GB GDDR5 graphics card

  My computer has an AMD Radeon HD 7540 D that gives me a lot of trouble when editing in Adobe first Pro CC.  I have 32 GB memory installed on this computer.  Can I upgrade to a graphics card that uses the Open GL or Cuda?  Like this one:

  Galaxy NVIDIA Geforce GT 740 2 GB GDDR5 graphics card

  or a better.  I know that there are some people on Youtube who suggest a card for editing over $ 300. I intend downconverting 4 k images on my PC for editing.

  I just need to know if I can switch to a card that allows me to use the mercury reading hardward no software.

  Momthetechie, welcome to the forum.

  If your motherboard has UEFI , you should be able to use the video card.  However, you might have to upgrade the power supply (PSU), also.  The current PSU is only 300W.  Most newer video cards require at least 400W to work properly.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• 5112 does not appear under devices NOR-DAQmx

  Why does not list MAX my 5112 under NOR-DAQmx devices, but it is displayed (undefinded) PXI system? Also, I can communicate with the map using the flexible Panel so I think that the device is correctly installed.  The main problem is that I can't use this card with my 5600 because MAX reports no digitizer.

  The 5600 must be coupled with a 5142 to form a DAA.  If you must use the 5112, you can use the 5600 on its own with the pilot DAMA downconvert only mode.  Then, it would be possible to manually use the OR-Scope driver with the 5112 to read in the data, but this is not recommended.  (It would be essentially the same using a third frequency step-down converter or digitizer).

  -Christina

• Agilent E3645A driver as a power source for Labview 6.1

  NOR expensive.

  I have a Labview 6.1 and I want to order a supply of Agilent E3645A, but I can't find any driver that works with this version. You can give them?

  Kind regards.

  Oldest message than you can find in the thread Downconvert . Be prepared to wait a while as 6.1 is very old.

  p.s. next time, post to the control instrument Board because as he says, this forum is for the DMM OR.

• OR PXI-5600 buck converter of frequencies only

  Hello

  I want to use the PXI-5600 as only a step-down converter of frequencies with the PCI-5640R IF Transceiver card as a digitizer. Can someone help me that how to use or PXI-5600 downconvert mode only (without running a digitizer PXI-5620 or PXI-5142 in the PXI chassis). I found different examples in which NI PXI-5600 is effectively used as PXI-5660 (5600 as a step-down converter frequency and 5620 as a digitizer) and PXI-5661 (5600 as a step-down converter frequency and 5142 as a digitizer) but I want to use the PXI-5600 only downconvert the Rf signal, which then will be fed to the PCI-5640R map.

  Thanks in advance

  Best regards

  RASHID

  Hello

  If you download and install the latest version of NOR-DAMA, a sample installed in the \examples\instr\niRFSA folder usual title DAMA step-down with external digitizer. This illustrates how to program a PXI-5600 as a standalone device using the driver NOR-DAMA.

  As a story - OR-DAMA 2.1 and on will have support for fashion "Buck converter of frequencies only" use the PXI-5600.

  -C

• Save a vi of 9.0 to 8.6

  I have an another vi I can't load because my LabVIEW version is too old. Can someone it saved in LabVIEW 8.6 for me? It requires some USB drivers that I already have.

  Hi nissen6,

  Here you go - I made a tree.vi for mental health

  Next time use the 'downconvert' wire to these questions!

• Bronkhorst driver for LabView 8.0

  Hi all

  For my work, I built a new machine. I'll have to measure the gasflow and flow critical, open a faucet. On the side, I measure a difference in pressure and weight. As my background is far from the programming, it will be a great challenge :-)

  On the flow, I am a flowmeter Bronkhorst, with a FlowDDE interface. So, I guess that this VI would help me a lot: http://www.morechemistry.com/labview/driver-bronkhorst/vi_bronkhorst_01.html

  The problem is when I open this VI, it say I need at least LabView 8.2. I have 8.0.

  Is there a way to use this VI anyway? Or have I missed an another VI can be used to import data easily FlowDDE? (I got the FlowDDE 4.62)

  Thank you.

  Best regards

  Renisaac

  The VI in 8.0 is attached.

  DDE. Interesting.

  If you encounter this new you can post downconvert queries in the thread Downconvert VI requests.

• Old archives Driver 6 Labview

  I need to know if there is an archive Alumni instrument Labview 6 Drivers.  I'm trying to control a Lake Shore 330 of six labview controller and all I can find are VI for labview 8.  I know that these devices have been around since the time of LV6 there also probably, around VI for him.  If someone could point me to a page of the archived pilot or predict VI of this instrument, I would be very grateful.

  Kevin Lyon

  You can submit a request for downconversion in the Downconvert requests Thread.