Download 0x8007001F error message when you install the latest updates in Windows XP.

Original title: problems with the update of my compooper (computing)

Windows will not update it after updates KB2707511, KB2699988, KB2709162, KB2685939, KB2510531, KB2544521, KB2718704. I already got an answer to a clean boot and I did with no results, I also re installed IE8 with still no result. I get the 0x8007001F error code and all these updates keep in default even after using Mr. Fixit. This becomes a real headache. My computer is constantly freezing up and I lost my audio controls, it does not at the moment where opening tabs announces that there is a long list. Please, someone give me a remedy for this nightmare.

Your suggestion of a clean boot is not resolution, I first had to remove a virus with Norton and then install the latest version of IE 8, then updates went through. I also had to use the Norton Power Eraser program in order to irradicate of other inhibitory start-up problems which were deeply rooted in my hard drive. Thank you for your attempt to help me, but I was the one who had to understand this. Now, my computer is high and GREAT work! I would say that MSN and Norton to collaborate in trouble all program and incorporate into the program of Mr.Fixit you who will remove the virus and update at the same time in order to avoid such a period of long downtime for all customers who have similar problems.

Sincerely,

Clinton joints

Tags: Windows

Similar Questions

  • Error message when you install the first elements 10 on my PC

    I bought the Pack Adobe Photoshop Elements 10 and Adobe Premiere Elements 10... and when trying to install, have successfully installed Adobe Photoshop Elements 10, but get an error message when you try to install the first Elements 10.  The Error Message reads as follows:

    This installation package is not supported by this processor type.  Contact your product vendor.

    Now that?  I don't know what to do from here.

    Could you please someone get back to me?  Thank you

    Hello

    Disc 1 contains the installer for 32-bit Windows.

    Disc 2 contains the installer for Windows 7 64-bit.

    Disc 3 contains the installer for mac OS.

    Disc 4 is the content of the disc for Windows Adobe Premiere Elements.

    Disc 5 is the content of the disc Adobe Premiere Elements for Mac OS.

    You can install from Disc1, 2 or 3 depending on the operating system running on your computer.

    Thank you

  • Error code 0 x 80070008 when you install the security update in Windows XP

    installation failed for the security update for Windows XP (KB2705219), reason given is 0 x 80070008.  "Mr Fixit" has not as well.  Help?

    Hello

    These errors can be caused by one of the following problems:

    ·         Programs or processes that interfere with Internet communications

    ·         Problems of computer resources

    ·         Strong Internet activity

    ·         Recoverable database errors

     

    Temporary connection related errors may occur when you use Windows Update or Microsoft Update

    http://support.Microsoft.com/kb/836941

  • Error message when you install the printer driver

    First of all, let me tell you that I was searching and tried solutions for ten days, but can not solve the problem.

    My HP P1102w printer is three years old and is connected to my PC via a USB cable. It is not a shared printer. It worked correctly until 10 days ago. Suspecting corruption driver, I downloaded the latest version of the driver on the HP website. When you try to install it, I met with this error message:

    Windows found driver software for your device but encountered an error trying to install it.

    In the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0

    If you know the manufacturer of your device, you can visit their website and check the support.
    My PC OS is Windows 7 Ultimate 64 bit. Let me know what additional information may be required.

    Please sent me useful information.

    Thank you so much.you sent slove my problem how.

    It seems that the problem was due to corrupted driver files that were not replaced when I reloaded the drivers. I was able to solve the problem by deleting the files in the driver manually. I followed the following steps:
    step 1:
    Check out C:\Windows\System32\DriverStore\FileRepository and delete everything that associated the P1102w printer, such as the hp1100.inf_amd64_neutral_56c36f106bed03b4 folder. If I remember correctly, there are two or three similar files that I deleted.
    step 2:
    Then I tried * 1102 on the path c:/windows/system32 and removed from files that have been associated with the P1102W printer.
    step 3:
    I'm not sure that this step is need, or you need to do this step before the other steps. However, in this step, I ran uninstall. exe from the HP driver CD supplied with the printer. After about 10 minutes I forcely closed the uninstall.exe process in Windows Task Manager because the uninstall process seemed to be hung.
    step 4:
    I ran setup.exe from the HP CD supplied with the printer and the printer installed successfully.
    I hope this answer helps anyone with a similar problem.

  • Code Error 80070020 when you install the KB2756919 update

    It downloads NO MORE than 11% and it's all FAILED EVERY TIME!

    First, check the site Download of Windows for direct download on the update that gives you bad. Manually download your update from the following link, then right click on the downloaded file and run as administrator. Acknowledge the UAC warning and provide credentials if requested. This grant you elevated privileges that may be necessary to carry out the reconfiguration of the system.

    Recommended if you can't always install the update, the next steps are to reset the Windows Update components or an update of the file downloaded a new attempt after performing a clean boot or boot without failure. A clean boot or Mode environment safe is important to ensure that there are no other programs that may be locking files or otherwise interfere with the upgrade process.

    Any Windows Update file can be manually applied using this method. To quickly access the correct download, just replace the # part of the link with the numbered part of the KB update #.
    http://support.Microsoft.com/kb/###
  • 0x08007F0F4 error code when you install the KB2686509 update

    Were there any resolution to this problem?

    If so, what is the solution?

    see these topics for updates:

    1. http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c

    2. http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-update-kb2686509-will-not-install-error/1df6306a-1bb1-47ac-941b-5779415b2e95

  • I got this message when I installed the latest InDesign. Cannot open the application. Do you know how to fix it? "Cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure you have a

    I got this message when I installed the latest InDesign. Cannot open the application. Do you know how to fix it? "Cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.

    Error starting InDesign CC: '... ". lack of sufficient permissions to access the folders preferences"

  • I installed the latest update of Windows. All updates. However, I find myself with the yellow warning icon in the bar of tasks and install when closing down.

    Description of the problem: a few days ago I installed the latest update of Windows. All updates, or so I think by the Windows Update Web page telling me so. However I find myself with the yellow warning icon telling me the KB2729450 update is ready on my computer and needs installation. However, the web page says that it successfully installed. I see the update in Add/REMOVE programs. I've deleted and reinstalled but still have the icon telling me to install it. Even when you turn off the computer the message is for me to install, but I think that it has already installed successfully. How can I get rid of these warnings?
    Operating system: Windows XP

    Hi depreciated,

    Thanks for posting in the Microsoft community!

    If I understand correctly, you receive a warning to install the update, even if it has already been installed. I'll try to help you the question.

    (1) did you make any changes before the show?

    The update that you are warned with seems to be question of the .net framework. I have you provided the link that will repair your .net framework.

    Microsoft .NET Framework repair tool

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=30135

    Note: after using the .net Framework cleanup tool, please install all .net Framework components.

    Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  • When you do the automatic updates of Windows Vista I get the "Security Update for Windows Media Format Runtime 11 for Windows Vista (KB968816)" = Failed__

    When you do the automatic updates of Windows Vista, I get the code below.

    'A security update for Windows Media Format Runtime 11 for Windows Vista (KB968816)' = failure

    • What should I do to fix this?
    • And what does this update actually?

    Thanks for any help provided.

    scrubie,
    If you go to programs and features, and then on the left side you should see a link for "Daily display installed."  Which would then show the list of updates with the State which will show you if it failed or not.

    Hope that helps. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • 0001 0002 error message when you install printer drivers

    I get the 0001 0002 error message when you try to install the drivers for a Canon Pixma MX892 printer. Five different Canon representatives tried to find a solution - nothing works. (It seems to be a Windows error message rather than generated by the installer of Canon).

    The error message appears when a) using the disc of Canon or the drivers of its Web site; (b) after a reboot selective; (c) when the Norton firewall is disabled; and d) each combination of a) through c). It also occurs when

    The exact time wherever it occurs during the driver installation process is when Setup "enrolled in the program of information."

    Is the exact wording of the message: an error has occurred while files were copied: 0001 0002.

    I am running Vista 32 bit and download the drivers using Firefox 18.0.2.

    After you have installed many printers without a hitch, it drives me crazy.

    Like you, I thought it was an Epson printer software installation problem and went bought a Canon.  Still I can not install two printers software.  The Epson and Canon customer service can not helped at all.  That's when I decided to contact Microsoft.

    Yes, I paid for the premium service, and I am pleased that they have set all my PC problems.  Takes about 2 to 3 hours to complete the work. I firmly believe that it is worth the money, in my case.

    In any case you can try this free fix by running Microsoft FixIt from this link or copy the address into your browser-

    https://support.Microsoft.com/en-us/mats/windows_file_and_folder_diag/en-SG

    I had also used this FixIt several times since to 'fix' everything OS files were inadvertently corrupt or have "disappeared".  Good luck.

  • I get this new error message when you change the properties of generation for an installer in LV2011sp1. - anyone know what it is?

    I built this front Installer. But I think that this is the first time since the upgrade to SP1. Now when I look at just the proerties for Installer build (I have yet to change), I get this error message when I hit the OK button.

    If I select No., it just stops. If I select YES, it seems to go ok. But I have not tried to build a new installer again.

    Anyone know what it is?

    Photo of the message is attached.

    I find it always useful to publish at least part of the error in your post, while others in the future may seek and find the answer.

    I think that you will be able to correct the error by clicking on the option of additional installers on the left pane, and then click OK to save the build.

    You probably asked to point the installer on some files that were missing since the upgrade.  I think that this occurs when the version of something on your computer changes, but the installer doesn't seem to know other installers until you visit the dialog box.  It would be brutal trying to replicate, but I met the same problem before.

  • "File not found" error message when you save the document

    Hello

    Oddly enough, whenever I click on 'save' in CS6, it opens a window "save under", (which shouldn't happen), then I click on save witht the existing file name (he said then the doc exist already), I click on OK, (and then on OK to the next popup window) do get the message "file not found".  I have to click on 'ok' and the document is not saved.  I tried to register differently in previous versions, and it still does not work.  I recorded a video of this behavior. You can see here - http://screencast.com/t/W1GYK0zsrk

    Why would he try to find a file?  Looks like an error message when you try to open a doc, does not save a doc.

    Help, please!  I can't stop my station until I get the document to save.

    Yes, Mohit1233 - happened with each file yesterday. Finally, I closed the doc (make me lose my job requires), then restarted my computer and now, that problem has disappeared. I work on a PC (HP);

    Barblove - I tried to do that yesterday (copy and paste into a new doc) and still nothing. I also tried to copy the work in a CS3 doc (but got an error message).

  • installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

    I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

    Hi derlonewolf,
     
    Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
     
    1. open the control panel (all items view), and click the Windows Update icon.
     
    2. click on the link to view update history.
     
    3. to view the details of a single Windows Update-
     
    (A) select and right-click on a Windows Update list, and then click details.
     
    (B) click on close when finished.
     
    As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.

    Steps to perform a scan SFC:
     
    1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
     
    2. type the following command and press ENTER:
    sfc/scannow
    [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
     
    A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
     
    3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
     
    4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
     
    5. once the scan is finished, close the command prompt window, restart the computer and check.
     
    Check the link below for further guidance on scan SFC - mentioned
     
    You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

    See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

    Post back with the status

     
     
    Aziz Nadeem - Microsoft Support
  • "Driver not installed successfully", the error message when you use the new MP3 player.

    I recently bought a Sony Mp 3 (model NWZ-E384) Player.

    When I connect the USB I get an error message will appear in the lower right corner on the screen saying "driver not installed successfully.

    Why am I seeing this? Better yet, why am I this problem? My previous Sony Mp3 worked fine with Windows 7.

    Is there a round work to install the device driver on my PC?

    Thank you very much

    Ian

    Don't know if this helps Sony - https://ca.en.kb.sony.com/app/answers/detail/a_id/42390/c/65, 67/p/57784,59687,59925,80740 / (from their support pages for the NWZ-E384 - http://esupport.sony.com/CA/p/model-home.pl?mdl=NWZE384&template_id=1®ion_id=3&tab=howto#/howtoTab ).

  • error 0X800f0214 when you install the printer driver

    When you install a printer driver (network), an error message appears saying that the action could not be completed - error 0X800f0214. The printer is shared and my firewall is set to off. I have absolutely no idea on what to do and would like to get advice and INFO.

    Marc DS,
    It would be useful to have a bit more information, such as the make and model of the printer, what version of Vista you are running and what type of network - wired or wireless (or both), if there are other non-Vista on the network computers, etc.  You get the error message corresponds to "the specified path does not contain any applicable device INFs" which means basically the location where the OS is looking for the driver file does contain a valid driver file.  There could be several reasons for this, but without knowing the configuration of network and printer, it's hard to identify.  Make sure that the driver is one that is suitable for this printer model and your version of Vista and make sure that the path (c:\ - or other) is correct and that the location of the driver file is shared.  I hope this helps.  Please post back with more information if you still need help.

    Thank you, Gloria
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for