Download ID5032 failure auditing on the event viewer.

Original title: anonymous logon in the event viewer

3 (network) domain of anonymous logon appears in my security on Vista event viewer, Audit failure ID5032 follow-up.  Is this normal or is this malware?  There are two implications of Internet Explorer running in the Task Manager, but two relatives when I close the browser, IE9: is this normal please?  I also get Audit failure ID5038, any advice as to the causes, remedies and the dangers of these events would be much appreciated, thank you.

Hi robin,

The two instances of IE9 running in the Task Manager is normal.

See the link below

http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/Windows-Task-Manager-showing-iexploreexe-running/94fd4ed8-652C-4756-B733-8b87c967e7ac

Reference before:

You can also run this next fixit.

Difficulty Internet Explorer issues to make it fast, secure and stable IE http://support.Microsoft.com/mats/ie_performance_and_safety/en-us

Hope this information helps.

Tags: Windows

Similar Questions

  • The Event Viewer error on startup: "the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E.

    I use Windows XP with AMD processor clocked at 1.6 Ghz and 2 GB of RAM. This error appears in the event viewer whenever my computer starts. I don't know if it's doing any harm. can someone advise?

    original title: the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E

    Hello Steven,

    Did you ever receive notifications that a virus or malware has been removed from your system recently?
    My only thought is that it is the remains of an infection on your machine.
    It is most likely harmless, but I don't understand why you'd be concerned.
    Do you have any task scheduled to run at startup using Task Scheduler built into Windows?
    I would check to see if there are tasks to run at startup:
  • I built a new system. Transferred to the hard drive and video card, but everything else is new. Restart Windows as it begins to start. I can get into safe mode and found event id 7026 and event id 7001 in the event viewer.

    As mentioned above, this is a new system, but with a more older IDE hard drive with windows xp pack 2 service (I think). When you first start, it says that windows is not stopped correctly and asks me to choose whether to start it normally or without failure or last known working configuration. When I choose to start windows normally, it will load up to a point. The screen of Windows Xp will come with the slide bar. It will then restart. When I choose to start in safe mode, a bunch of 32 file system scrolls upwards on the screen. I don't remember if it of normal or not. He takes over in SafeMode but. I went to the event viewer and got the following errors.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7026

    Date: 21/01/2011

    Duration: 01:18:54

    User: n/a

    Computer: CLEAR-ZONE of the

    Description:

    The next (s) starting or starting system could not load:

    AFD

    Avgldx86

    AvgMfx86

    Avgtdix

    FIPS

    IPSec

    MRxSmb

    NetBIOS

    NetBT

    Processor

    Rdbss

    Rdbss

    Tcpip

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 21/01/2011

    Duration: 01:18:54

    User: n/a

    Computer: CLEAR-ZONE of the

    Description:

    The IPSEC Services service depends on the IPSEC driver service which failed to start because of the following error:

    A device attached to the system does not work.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 21/01/2011

    Duration: 01:18:54

    User: n/a

    Computer: CLEAR-ZONE of the

    Description:

    The Hello Service service depends on the service protocol driver TCP/IP which could not start due to the following error:

    A device attached to the system does not work.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 21/01/2011

    Duration: 01:18:54

    User: n/a

    Computer: CLEAR-ZONE of the

    Description:

    TCP/IP NetBIOS assistance service depends on the AFD service which failed to start because of the following error:

    A device attached to the system does not work.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 21/01/2011

    Duration: 01:18:54

    User: n/a

    Computer: CLEAR-ZONE of the

    Description:

    The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:

    A device attached to the system does not work.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 21/01/2011

    Duration: 01:18:54

    User: n/a

    Computer: CLEAR-ZONE of the

    Description:

    The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:

    A device attached to the system does not work.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    I did find something online that contains all the system boot or start specific drivers. Windows and harddrive was working in another computer just before he was switched. Let me know if you need other information.

    Thank you.

    First of all you are missing probably a number of device drivers, particularly the network card driver and the driver of the motherboard.  Use your XP disk to perform a repair installation.  This should go a long way toward you're going to get.  If your new box has a driver disc that should help a lot.  You can't port XP perfectly the way you did.   It usually requires a repair installation to fix the hardware abstraction layer. Colin Barnhorst

  • Error in the Event Viewer system log

    Separated from this thread.

    Gerry,

    Thank you for your response.  It gives me a better understanding than the data stored on my computer that may be able to help me, and you have introduced me into a player.  I've posted the system log here and it includes hundreds of lines.  However I do not know how to make it visible to you.  I checked it to share and the only file that is serious is one that you brought me to download.  Although I have not found the answer to my problem, I found your advice gave me a better understanding about the tools that are available.  Maybe I'll get to understand how to use them.

    Ed Walsh

    Ed

    Please provide more information for your issue to be diagnosed.

    Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

    Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

    Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

    To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

    For assistance OneDrive see paragraph 9.3:

    http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

    General remarks on the event viewer:

    http://www.gerryscomputertips.co.UK/syserrors5.htm

  • What version of IDS 4235 does not correspond with the event viewer

    Hello

    I have an ID with S37 3.1 (3) and the Event Viewer 3.1 ID (1) S37.

    I upgraded to version 3.1 S39 IDS (3) but, after downloading the IDS EV and respective signatures, EV IDS kept the latest version 1.0000 S37. I didn't sign up for the latest version of signatures S39 (3.1 (1) S39).

    Can someone help explain this.

    The S39 has been updated for emergency. In order to get out as quickly as possible the VEI update was not included.

    This will be fixed with the update of the S40.

  • Event ID PnP 10317 event is logged in the event viewer

    Network device on the OEM Win 2012R2 server loses connectivity.

    General information of the event viewer:
    Miniport had the fatal error event: the miniport has detected an internal error.

    Help only reset and the problem does not occur in WIN7.

    Maybe somebody has an idea about this problem?

    Thank you.

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • How to change the ID of 'security' other than 'NULL SID"in the"Event Viewer"on WinSrv2008

    Hello

    I'm working on the Windows Server 2008 system.

    I would like to be displayed in the event viewer ' ' the correct ID 'security' (it is always displayed as "SID NULL" instead of the right domain/username) for the logon task (event ID: 4624).

    For the task of the closing session, the security ID is displayed correctly.

    Thank you for your answers

    Hello

    The forum Microsoft Community are for consumer issues. Windows Server issues should be posted in the TechNet Windows Server forum, where they specialize in Windows Server.

    Thank you

    David

  • Symbols of the event viewer and 'Error' or warning

    In the "Event Viewer" window, in the file of the application, there are events 1701. All of these events have a 'mistake' or the symbol 'warning' in the column type.  Is this serious? How did this happen and an average person can solve these erroors and these warnings? Kenny

    OK you return

  • Errors and warnings in the event viewer on the new laptop

    I have a HP 2000 Notebook PC with the product number QE279UA #ABA

    Bought and started using it at the end of December 2011.

    -Since then, I had immediate problems with the WiFi adapter (HP tried to solve the problem by sending a new network card, but the problem does not present yet so I never installed)

    -He had 3 cases where the laptop closed by himself for reasons unknown (he didn't feel not enough for overheating hot, and with it being new, I don't see it being already a reason), tonight being one of them, so when I saw somewhere online read the event viewer, I see as since 22 December 2011 I had 279 errors, 596 warnings. I do not understand one of them of course except the 3 criticals hence my laptop a intestinal shutdown. I have a feeling that these numbers are not good, given only to being less than 2 months old, but I don't know exactly what to ask about what to do. I wish I could have someone to look rather than try to describe the problems through e-mails and forums, but I don't have to spend hundreds of dollars to bring to Geek Squad or the other. How should I proceed?

    Thanks for any info.

    Warnings are normal and can be ignored.

    Mistakes can happen, I have 42 in the last 7 days, but my system works fine. Windows manages quite well the errors, and generally, they are not a problem, but will record in all cases. It takes a trained eye to sort through this and understand if there is a serious problem or not.

    Criticism can be a problem, but looks like they are at the unexpected stop, so no useful information can be drawn from those.

    If you go to control panel (display the icon) and click Action Center, that's where things that go wrong get reported you, if it is clear from all the messages, then you can ignore the event viewer.

    You have a problem with the unexpected stops, they are very difficult to unravel by the normal user and needs professional diagnosis.

    You are under warranty with HP? If you are, you can contact HP on the problem, make sure you have your personal files backed up before instructions from HP to resolve the shutdown problem.

  • Question about consistent errors in the event viewer XP Home Edition

    I ran a program called VEW looking errors up to twenty in the XP Event Viewer.

    Here is the data for the analysis of files:

    V01c Vino event viewer run on Windows XP in English
    Report run at 28/01/2012 23:42:23

    Note: All dates below are in the format dd/mm/yyyy

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "System" Log - error Type
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Journal: "System" Date/time: 01/28/2012 22:48:06
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: "System" Date/time: 01/28/2012 22:47:40
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 01/28/2012 22:35:31
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 27/01/2012-22:49:54
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: "System" Date/time: 27/01/2012-22:37:21
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 27/01/2012-14:32:57
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 27/01/2012 03:38:23
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 25/01/2012-13:53:36
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: "System" Date/time: 25/01/2012-13:32:34
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 24/01/2012 23:35:59
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: "System" Date/time: 24/01/2012 23:21:10
    Type: error category: 0
    Event: 29 Source: W32Time
    The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be for 14 minutes. NtpClient has no source of accurate time.

    Journal: "System" Date/time: 24/01/2012 23:21:10
    Type: error category: 0
    Event: 17 Source: W32Time
    Time provider NtpClient: an error has occurred during the DNS lookup of the manually configured peer 'time.nist.gov, 0x1 '. NtpClient will try the DNS lookup in 15 minutes. The error was: a socket operation was attempted to an unreachable host. (0 x 80072751)

    Journal: "System" Date/time: 24/01/2012 23:18:36
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 24/01/2012 02:15:46
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 24/01/2012-12:58:29 AM
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: "System" Date/time: 24/01/2012 00 h delighteth
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: 'System' time: 23/01/2012 23:26:32
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: 'System' time: 23/01/2012 23:26:19
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: 'System' time: 23/01/2012 23:02:41
    Type: error category: 0
    Event: 10005 Source: DCOM
    DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

    Journal: 'System' time: 23/01/2012 18:28:49
    Type: error category: 0
    Event: 7023 Source: Service Control Manager
    Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

    Journal: "System" Date/time: 24/01/2012 23:35:59

    Parameters of scanning has been:

    • System
    • Errors
    • 1-20 errors, valued at twenty.

    What are these errors and they are nothing to worry about?

    I have Nero 8 on this system and have an updated hosts file the running here: http://winhelp2002.mvps.org/hosts.htm

    Not sure, but I may have changed a network setting to activate the new hosts file work properly.

    Seen these errors for a while. system works well and smoothly.  No symptoms of malware or infection seen or found.  I would call these software errors as they seem does not affect the operation of the system.

    XP Home Edition SP3 P4 2.8 2 GB RAM

    Joe

    Oh yes :)

    I have never used the program VEW and don't think I will check it - I just look at the Event Viewer logs the old-fashioned way (manually) if I think that there is a problem, but that might just be the old me.

    It is true that XP Home doesn't have Group Policy Editor, but all policy settings are always available via the registry.

    Some malware will change your GP settings and cause problems.

    I have a little import registry will correct all the ones I know, so if someone has these symptoms, any flavor of XP, they are running, I'll just send the script because sometimes you will be not able to solve the problem, even if you have not the GP Editor.

    The registry always import work - and work well for XP Home or XP Pro.  If you have the symptoms and XP Home, what would you?   Start the import operation of the registry.

    If you're curious, off on my SkyDrive it is a spreadsheet Excel (Group Policy settings) who has all the parameters of GP and where they are in the registry.  I do not recommend start searching, but it is useful to know where things are if there is a problem.

    I would not allow the connection of a security XP stuff unless you think you're being attacked.  More and verbose logging slows things down.  My Event Viewer Security log is empty.

    Find the links to the Microsoft Support Engineer for the most part useless to actually solve a problem (because it help you with your problem), if someone has a question or point of Event Viewer, I usually just send them this:

    To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

    A shortcut to the event viewer is to click on start, run and enter in the box:

    %SystemRoot%\system32\eventvwr.msc

    Click OK to launch the event viewer.

    The most interesting newspapers are usually the system and Application logs.

    Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

    If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

    Not every event is a problem, some are informational messages that things work very well, and some are warnings.

    However, no event should defy reasonable explanation.

    Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
    Informational messages have white is.  Not every error or warning event means that there is a serious question.

    Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

    If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

    When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

    If you paste an event, it will look something like this annoying system startup event:

    Event type: Information
    Event source: Service Control Manager
    Event category: no
    Event ID: 7035
    Date: 14/07/2010
    Time: 17:54:18
    User: Jose
    Computer: computer

    Description:
    The Remote Access Connection Manager service was sent successfully a starting control.

    To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

    You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

    http://www.EventID.NET/

    If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

  • My computer is slow and I checked the event viewer, and it says I have reached my limits of interruption of security.

    My computer is slow and I checked the event viewer, and it says I have reached my limits of interruption of security. I ran Netstat-no, but data flashed on the screen, but I can't freeze it at the screen to display the data. What keys down to hold the data on the screen to display it.
    Thank you, OTTO

    original title: interruption tcp/ip connect limits

    Hello

    Try the steps below and check if the problem persists.

    Step 1:

    Run the fix provided in the link below to reset TCP/IP and check if that helps.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

    Note:

    Step above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756

    Step 2:

    You can check the link provided below for more information on the use of Net command in Windows XP stat.

    Netstat

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/netstat.mspx?mfr=true

  • Try to diagnose the strange message in the event viewer

    After that I started my PC, I was looking at the event viewer to see if there was any error messages and found this...

    Could not validate the fact that \Device\Oxser0 was really a serial port

    Sort of tracking down what it means? Google was unhelpful.

    Hello

    1. Are you facing any problem related to this?

    Oxser.sys is a device driver file series of OEM. The file is signed digitally to Microsoft Windows Hardware Compatibility Publisher.

    You can try to perform the clean boot and check if it helps:
    http://support.Microsoft.com/kb/310353

    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

    It will be useful.

  • Message in the event viewer running XP Pro with SP3 get following: 7026 ID: start system or boot start drivers following could not load: nvatabus nvraid. How can I fix it?

    Get the following in the Event Viewer error message have had this message for quite some time

    ID 7026: boot start or system start following

    driver (s) failed to load: nvatabus nvraid. How do I

    This difficulty?  I am running XP Pro SP3. Would appreciate any help in this matter.

    Hello

    · What is the number and the model of the computer?

    · Remember the recent changes on the previous computer o the question?

    The problem is related to the display driver installed on the computer.

    Check the status of the card/video display adapter installed on your computer.

    a. click on start

    b. click Run, in the Run dialog box type devmgmt.msc

    (c) in the Device Manager window, look for the screen reader and expand the drive, double-click the sub element to check if an error message or error code is listed.

    See the links below: http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+Operating+System&ProdVer=5.2&EvtID=7026&EvtSrc=Service+Control+Manager&LCID=1033

    How to manage devices in Windows XP: http://support.microsoft.com/kb/283658

  • Impossible to start and open the event viewer.

    I have Windows Vista (SP1) currently and am having some problems with the event viewer.

    Whenever I try to run the observer of events, either through the program or the elevated command prompt, MMC pushes me to get approval to open.

    Once opened, an error message appears indicating "MMC cannot initialize the snap-in" with the only option to hit being 'Okay '.
    I love the event viewer in order to keep track of my system and wonder if there is any means possible to get this corrected and resolved.
    Any help is appreciated!

    Hello

    You did changes to the computer before the show?

    Check if the problem persists with the different user account.

    I suggest you to proceed to the next method.

    Method 1: Run System File Checker (SFC) scan on your computer to fix this.

    SFC analyzes and verifies the versions of all protected system files after you restart your computer.

    Check the link for more information to do the same below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Restart the computer and check.

    Method 2: If the problem persists, I suggest you to open in safe mode with networkevent viewer.

    See the link below to start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Method 3: If the problem resolves itself into safe mode with network, perform the clean boot. Clean boot helps eliminate any driver or software conflicts. This is because as the usual startup programs as well as non-Microsoft services are not started in a clean boot configuration.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    After you perform a clean boot, restart your computer and check.

    Note: After you perform a clean boot, perform step 7: reset the computer to start as usual of the above article.

  • MSN - CRASH - TECH MSN TOLD - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL

    MSN TECH SAID TELL WINDOWS CE PROBLEM I am STICK - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL and talked with msn. Called MSN windows Dept. -How can I correct this situation?

    Hello

    Did you change your computer?

    Method 1:

    I suggest you perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I also suggest you to follow the link and check.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

Maybe you are looking for

  • Laptop does not connect to the internet once again.

    I had this problem in April and she is back again. I when I start the little icon in low shows only havea limitrd abd the only connection, at times I can connect through the Trouble shooter. When it happened before that I was told to do a full reinst

  • Has released the form, where is this cable?

    I took out the screen for one year, and I can't know where the cable to the control panel "touch" (I think it is, you can turn off wifi etc)? Any idea? It's a Hp Pavilion dv7-2114

  • Sansa Clip + does turn on at all!

    My Sansa Clip + (4 GB) will not turn on. I tried: By pressing the power button while up to one minute By pressing the power button and the Middle up to one minute button for Plug USB wall adapter Connect to computer No sign of life at all. I loaded f

  • How do I connect the router without home computer

    I bought my mother an Iphone and want it have WiFi instead of using 3 g data plan, but she doesn't have a computer at home at all. How to connect a router at home without a computer? Thank you!

  • Malware problems

    Help! My compaq presario cq57 never ran right! I caught a VIRUS of FBI six months I got it; pH remotely deleted and repaired. However, I lost internet explore and have still problems its been 2 years now and I still have problems. No keyboard, gel, s