Download Matel Barbie nail printer and cannot operate correctly

Similar Questions

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• I have a hp printer and cannot figure out how to load envelopes size 10 for printing

  I have a hp printer and cannot figure out how to load envelopes size 10 for printing. Any help would be appreciated.

  Hello HeidiZarecky,

  You can follow the instructions in this document to load envelopes for your printer.

• I downloaded the Lightroom 4 upgrade and cannot open the installer

  I downloaded the Lightroom 4 upgrade and cannot open the installer

  Ivo,

  There is trouble on the side Microsoft who know us.

  Please refer to the documentation for the same

  http://helpx.Adobe.com/Lightroom/KB/Lightroom-43-doesn ' t-installation - Windows.html

  Florian

• Download says "installation is damaged and cannot be opened".

  For the life of me I can't talk to a real person in the customer service! Worst service ever, worse than at & t customer and which is not a little say. I bought the CD years ago and lost and I tried to download Creative suite 5 and it says "installation is damaged and cannot be opened". What should I do?

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• I've expanded the acrobat reader to read the fine print and cannot make it back to normal - that someone has a suggestion?

  I've expanded the acrobat reader to read the small print and can / t get it back to normal can someone help me?

  Hello

  Developed by you mean you tried to read full screen mode?

  Or which refers to something else?

  Please relaunch the software and see if it works fine now.

  What OS are you?

  Concerning

  Sukrit diallo

• My email is wrong and cannot be corrected

  Hello

  I have a code of adobe. When I connect using "e-mail to" it shows my id with 'email B. I need to invite 'email A' creative cloud, but I can't, because I can't use "e-mail to" like Adobe ID because he thinks that it is attached to the account showing 'e-mail B' - 'e-mail B' is wrong. I know this is a confusing description, and I don't think that an Adobe employee can help me with this, as something is messed up in my Adobe account and cannot be correctd via the web interface.

  I can't use creative cloud because of this.

  Best regards

  Thomas

  You may need to log in as username: "EmailB" and change it to something like "EmailB_old".

  Then log in as 'E-mail' and change it to "EmailB".

• Printer offline cannot operate. Printer configuration file print well

  Have 4200, hp laserjet prints fine from the printer configuration file. Cannot print a windows test.  Windows printer shows offline. If I do offline... it shows offline - offline. new server installed laserjet.

  Hi purecnty,

  -How long have you had this problem?

  Follow the steps below:

  Method 1:

   

  If the symptomsmentioned in the article match those on your computer, follow the steps mentioned in the article below:

  The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer

  http://support.Microsoft.com/kb/2027593

  Method 2:

  Reference:

  Your USB printer is listed as offline when you try to print from Windows

  Gokul http://support.Microsoft.com/kb/834462 - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Disadvantages of the printer: cannot set the default printer and cannot print a PDF file

  Why can I not print with my HP Laserjet MII32FP pdf files? I not had problems like this before with my old printer. I can not even this set as my default!

  Hi Stephanie,

  This problem can be caused if the latest version of Acrobat Reader is not installed on your computer.

  1. How do you open PDF files? Using the Adobe reader software? If you use Adobe, then which version you have installed on the computer?

  2. If you use other software to open PDF files, is this software?

  3. you receive an error code or message?

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1:

  I suggest you follow the steps mentioned in the article below.

  
  Does not print PDF | Reader 10.1.2 | Windows

  
  http://helpx.Adobe.com/Acrobat/KB/PDF-wont-print-reader-10.html

  Method 2:

   

  Follow the steps in the link.

  Resolve PDF printing problems. Acrobat, Reader

  
  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  If you need further assistance on this topic, let know us and we will be happy to help you.

• I buy forms, bywidgets.mu and cannot operate.  any help?

  I buy the forms + bywidgets.mu

  I followed the instructions on the Web link (https://widgets.mu/se/FormsPlus/demo/)

  and still not get anything to work.

  I just get <>inside a box, and that's all.

  Help please!

  It does not appear in my downloads. Yet versions 1.1.0. Another way to get it?

  I'm still working on the site on my desktop, when I publish it to my tests I will send you the link.  Thank you once again to fix this.

• Bought the Wireless Desktop 800 and cannot operate

  I just bought the Microsoft Wireless Desktop 800 and he says it configures correctly on several computers, but the mouse or the keyboard started working. I have the batteries in, the switch lights up on the mouse, and I connected the mini USB. Drivers say that they install and I ran fixit application and it found no solutions because it does not even detect a problem initially. Method 2 I can't find the driver that my product is not listed. I am running Windows 7 on all my computers.

  Seriously considering to take back and past for one product other than microsoft.

  reub77

  Hi reub77,

  I see that you are referring to the steps I have provided in the link below
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/d2550ea0-4631-49f9-8A7C-8cb60132c594

  Wireless Desktop 800 is compatible with Windows 7, click here to check out the link

  Method 1: You can see the steps mentioned in the article below, which deals with a similar question

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  Method 2: If the device does not work on multiple computers, you can replace

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  How to replace hardware or lost, broken, or missing Microsoft software

  http://support.Microsoft.com/kb/326246/en-GB

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Download problem for printer HP 7520-all-in-one - "HP Print and Scan Doctor"

  The download was in 2 parts.  I have completed part 1, but then I lost part 2 of my screen.

  How to make this return complete part 2 independent to download for 'HP's print and Scan Doctor '?

  Hello

  What software do you use to download? This is a small file, why software needs to "chop" in 2 parts. Please try again the whole file:

  http://ftp.HP.com/pub/softlib/software12/COL50849/MP-123407-2/HPPSdr.exe

  More from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5199463

  Kind regards.

• Yahoo mail and other small sites print and can not adjust. This is not true with the Explorer

  When I open my yahoo home page printing is of normal size and can be adjusted. In yahoo mail, printing is tiny and I can't fix. Some websites in my favorites also opens in the small print and cannot be adjusted. If I use explore I have none of these problems. I have tried everything I can think and not luck.

  Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)

  • http://KB.mozillazine.org/Zoom_text_of_web_pages

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

• 4630 won't recognize scanner - printer and utility connect properly

  4630 won't recognize scanner - printer and utility connect correctly.

  Downloaded the software for Mac OS 10.10 altest, but he still does not see the scanner.

  Help, please!

  I uninstalled and reinstalled and it works again.

  Thank you