Download printer software

Similar Questions

• OfficeJet Pro 8620: Cannot download printing software

  I just downloaded the HP Easy Start software for my printer on HP web site without problem.  Running the software to set up my printer it starts to download the crucial software.  After downloading for a while, it displays the following error message, "cannot install the software.  Cannot download the software.  Check your network connection and then try again. »

  

  This message has initially started after 6MB were downloaded.  However, whenever I hit OK and the download began immediately to treat once again, the number of MB are needed until the message occurs an increase slightly.  It seems to increase by 1 MB, whenever I have reprocessed the download.

  There is no apparent problem with my connection to the network.  All other programs and devices connect to the network without problem.  I'm operating a 27-inch iMAC late 2014 with 4 GHz Intel Core i7 processors and 32 GB of DDR3 memory.  The OS is El Capitan Version 10.11.1.  My router is a Capsule 3 TB.

  Hello

  Try to install the software via Software Update as follows:

  http://support.HP.com/us-en/document/c04510394/

  Then, install the HP Easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Please let me know the results, the steps above provide all the features, exactly as does HP Easy Start.

  Shlomi

• Update Windows 10 removed my printer software. I downloaded the drivers, but windows won't install it cos

  Update Windows 10 removed my printer software. I downloaded the drivers, but my PC won't will not install because the security certificate for the HP software says windows Defender is not closed or not properly closed. What should I do?

  Hi @Mixawixa

  Spoiler (Highlight to read)

  What browser do you use? Edge?

  Can you try IE or Chrome and see if the problem still exists?

• Download the hp printing software 4630 on my ipad

  I need help to down load the printer software hp 4630 to my ipad.

  How to download on my ipad 4630 printing software? For 5 days, I was ask for help in this challenge. Help!

• Printer Officejet 6100 - Download the software

  I can not load the software for the new printer.  Driver CD, appears to download, but then I get nothing - no prompt or anything.  Then, I tried to download the software from the interenet.  Get about 99% of fact and I get an error message that the download was interrupted.  I'm back, it restarts and I get the same message again and again.  Windows Vista.  Help!

  Hello

  Please perform the procedure that could solve the problem below.

  1 > if the CD is not autorun, and then click START > COMPUTER > double click on the CD drive (which would have a HP logo). Locate the setup.exe file and double-click it. Installation should start up.

  2 > if step 1 does not work, turn on the printer. Connect the printer and the computer with a USB cable. Then try the below mentioned steps which allows you to print would set.

  follow the steps below...

  Click START > search for programs and files, type PRINTERS and click the pop list > a printer window would be open. > click on add a printer > add a local printer >

  (if the printer is connected with USB)

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• I am trying to install a new printer. I get an error code 80072EFD of # when I try to download the software. How can I fix it?

  I am trying to install a new printer.  I get an error code 80072EFD of # when I try to download the software.  How can I fix it?

  See if this article is of no help:

  "You may experience some temporary connection errors when you use Windows Update or Microsoft Update to install updates"
    <>http://support.Microsoft.com/kb/836941 >

  HTH,
  JW

• I got a message saying that the RPC server not available. I can't print or download the software for my printer.

  I got a message saying that the RPC server is unavailable.  My print spooler seems OK and my Dependencies tab it shows not itdepends on CPP, but I can't use my printer and I can't download the software because the driver is missing.  I can't download the driver for some reason any.  My printer is a lexmark X 1190.

  Hi donnasmum,

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  4. do you have security software installed on the computer?

  Method 1

  According to the Lexmark solution, you will need to restart the service on the computer print spooler.

  Error: "the RPC server is unavailable."

  Method 2

  If fails it to step above then check out the link below and run the fixit tool available.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

• How to re-download the software finger print after that I uninstalled it by mistake?

  How to re-download the software finger print after that I uninstalled it by mistake?

  Hello

  You will find all downloads for your laptop starting by selecting your operating system here.

  Kind regards

  DP - K

• Status.msi error after update of the HP - Vista printer software download

  Everything worked well and then I downloaded an update from the HP printer software there is, through the application of updated HP and immediately after that I started having a few nights the following error message:

  "The feature you are trying to use is on a network unavailable resource.  Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below. »

  In the "source of use:" drop-down list there, "C:\Users\Bob\AppData\Local\Temp\7zS73BD\setup\status."

  If I click on 'OK' it appears that the same error message.  If I click on 'Cancel' and then I get the error message following popup "an installation package for the product to the State cannot be found."  Try installation again using a valid copy of the installation package "status.msi".

  I tried to load the CD-ROM to boot for Vista (v.8.0.1) supplied with the printer (HP Officejet Pro L7580 all-in-one), but my computer will not play.  It will read start XP CD, but I can't find the file "status.msi" anywhere.

  Any help is greatly appreciated.

  Hi, I had exactly the same thing happen to me and I went crazy trying to solve this problem, but I did tonight and I want to tell you how I fixed it so hopefully it will fix it for you.  Run a desktop Dell with Vist Home premium 32-bit with SP2 and a HP 4315 all-in-one printer.  I got this answer directly from HP technical support.  I've updated via update HP and got an update of connectivity and had then windows Setup tries to install service.msi like you.  Here's what HP support said to do what I did and it fixed it.  go to start, all programs, uninstall HP, then select uninstall, everything.  Then go to http://support.hp.com enter your go product number for the drivers and software and then reinstall download it full of software and the driver.  Reboot and it should disappear.  Please let me know if it works
  Is the best,
  Kaja

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Windows 7. Cannot download the software of the Scanner to printer Epson XP-305.

  Lived Epson who have now been suggested to try to get help from Microsoft. Printing software download, after about 18 seconds, he returned with "Unable to launch the required program", it continues to download and then install the software. All works o/k set apart from the scanner. It then says not downloaded the scanning software.

  Hello again,

  I found a driver separated for the scanner for XP - 300 - perhaps your printer family (there is just no XP - 305 not listed on the Epson site). Go to the download site for the XP-300 printer, let it detect your OS and bypass the driver combo. Open the tab drivers (click on it) and the latest driver listed for the scanner and the utility scan.

  Assuming it is the same family of AIO printer, the process of this page: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&infoType=Overview&oid=201985 .

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• I have a laptop computer sony vaio and it will not download a dell 942 printer software

  my laptop sony with window 7 primnum will not download sftware for a dell 942 printer. Any ideas?

  What is the error message when you try to download the software?

  You run it from its current location?

  Try first save it to your download folder, and then run Setup from there...

  How to download and install drivers for Dell 942 all-in-one printer

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_289481&isLegacy=true

• Where can I download the software of the printer for printer HP officejet 4500 for windows 7

  I was wondering where to download the software from the HP officejet printer 4500 for windows 7.  I got it on my other laptop, but I lost the cd and so I wanted to know how to get it on my new laptop.

  Hello

  Please use the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3919448

  Kind regards.

• The HP printer software update repeats

  I've updated to Yosemite on my iMac and the updated drivers from HP and updates for HP 3525 advantage printer/scanner. All connects and works. AP store finds a new "HP Printer Software Update 3.0" update. I installed this update 10 times in the last month, but after installation immediately the same update appears. How can I get rid of this?

  Hey @flynnrey,

  Welcome to the Forums of HP Support!
  
  I want to help you solve the HP printer software update 3.0 Apple that continues to display on your computer Mac OS X 10.10 for your HP Deskjet Ink Advantage 3525 e-all-in-one printer. Please follow the steps below to fix this problem.

  Step 1: uninstall:

  If you initially installed with the driver Package download please follow these steps to uninstall it:

  1. From the desktop, double-click Macintosh HD, and then click Applications.

• HP Smart printing software

  I got something with my new ink cartridge, talk to me about HP Smart printing.  I went to the web site

  HP.com/go/SmartPrint/offers.  I downloaded the software.  It installed and put a notification in my

  taskbar.  I had to download Bing Bar, because I didn't do it.  Have downloaded correctly.  But when I click on the

  HP Smart print button will choose a portion to print fine but don't give me a place to change or cancel or print.

  Then I read something that told me to uninstall and then reinstall.  I uninstalled but the button on the

  taskbar has not disappeared.  When I try to reinstall it tells me that the program is already installed.  BUT

  It is not in my list of all programs.  HELP please.  Either way, I'm under Internet Explorer 10.

  Hi SteveB17,

  I understand that you have a problem installing Smart Print on your computer. I'll try my best to help you solve this problem.  Here is a video on the download and installation of HP Smart Print.

  I hope this helps, let me know.

  Thank you