Download problem for printer HP 7520-all-in-one - "HP Print and Scan Doctor"

The download was in 2 parts.  I have completed part 1, but then I lost part 2 of my screen.

How to make this return complete part 2 independent to download for 'HP's print and Scan Doctor '?

Hello

What software do you use to download? This is a small file, why software needs to "chop" in 2 parts. Please try again the whole file:

http://ftp.HP.com/pub/softlib/software12/COL50849/MP-123407-2/HPPSdr.exe

More from the following link:

http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5199463

Kind regards.

Tags: HP Printers

Similar Questions

  • Download and use of printing and scanning doctor

    Here's a video that shows how to download and use printing and scanning doctor.  It will show a way to access, download and use this tool to access and rectification of scan and printing issues.  It will help to solve the problems with the scanning of the error messages, connectivity issues and other issues also. It is worth noting that this video is for Windows-based computers.

    I hope the community finds it useful.

  • HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help

    HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works.  I looked for help & tried repeatedly, & am willing to renounce HP.

    Hello

    Thank you for using the HP Forums.

    You can try this alternative solution to Scan:

    HP extended Scan

    FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

    Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

    Let us know if it works.

  • HP OFFICEJET 4500: printer problem hp 4500 doen't pull paper from the bin, hp print and scan doctor did not help

    Paper printer problem hp 4500 doen't pull of the plateau, hp print and scan doctor did not help

    Have you tried that?

    http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---K710/4181269/document/c01969913/

  • HP OfficeJet Pro 8710: HP OfficeJet Pro 8710 print do not tried HP Print and Scan Doctor

    Hello HP Forum,

    I'm new and have read many articles on printing does not. I had this printer yesterday and I was so excited to use it! When came home... DOH! Nothing prints not! So, I used the print and Scan doctor and that fixed it... temporarily. Now it won't print and print and scan doctor said nothing! I printed something this morning, but I saw a mistake, then I went to print it again, nothing would have uttered. I'm getting a little angry that I (May) have lost $170 on this thing.

    I could really use some help please! If not, I just lost $170 on this thing.

    My system is Windows 10 1511 Pro 64 - Bit, and the printer is USB connected.

    Thanks in advance,

    HPOJPro8710

    Edit: I just tried printing HP and Scan Doctor 4.9 once again, now it works again. But this will not last forever, I need a permanent solution.

    Edit 2: I forgot to add that I intend to leave it on all the time. It is good to do? Causing my problems?  My grandparents have their HP OfficeJet Pro 8600 24/7 for I don't know how many years! haha and they have no problem!

    I got a HP OfficeJet 4630 USB connected, and I turned off each time and printed correctly. Only had to fix once with HP print and Scan doctor.

    Hi, seems that your computer is powered off the USB ports to save energy.
    Check in the Device Manager.
    Check under USB controllers.
    Check all USB hub root.

    Select power management and ensure that:

    Allow the computer to turn off this device to save power is DISABLED.

    Use a USB cable of good quality, not more than 6 feet long.

    Connect the 8710 directly to a power outlet wall.

  • envy4500: envy4500 print and Scan Doctor 4.9 has stopped working

    The deleted files on laptop for free space, must have deleted something important, like the printer does not work well.

    Tried to uninstall the software and then remove device.   Inserted the CD, then reinstalled.  I can print with USB cable.

    Print and scan doctor 4.9 ceases to work, so have difficulties to find what the problem is.   Any suggestions?

    Thank you. This was my first post to a forum and I am glad for a quick response.

    I ended up uninstalling programs printer, restart, then deleted the printer device, restart, then goes on HP site and download software and implementation.

    Always impossible to use printing and scanning doctor. Same message as it closes. Hope that I won't need it. Don't know what the problem is with the diagnosis. Will retain the option of restoration in mind.

    I can print with USB and wireless, so I guess I'm ok now.

  • HP LaserJet M13191 MFP: must run 'Print and scan doctor' whenever I need to print

    Whenever I need to print, the print job gets held in place in the queue...

    • 'Use printer offline' flashes
    • Status: "error - printing".
    • Port USB001

    After execution of HP print and Scan doctor, the print queue is cleared, I print the document again and it will work only once.  Next time I want to print, I have to restart the HP print and scan doctor, and then reprint the document.

    I'd appreciate any help/advice.

    Hey @everbloom2,

    Welcome to the Forums of HP Support!

    I understand that you have some problems with the printing of your Windows 7 PC to your printer Laserjet M1319. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

    1. If your printer is connected via USB cable to your PC, delete.
    2. Click on start and open devices and printers.
    3. Right-click on any icon of your printer listed.
    4. Click on remove the instrument.
    5. Repeat for all other icons of your printer listed.
    6. Click Start, in your type of Services Research and open Component Services.
    7. On the left, click Services (Local).
    8. On the right, do a right-click on print spooler.
    9. Click on stop.
    10. Open your drive C:\, Windows, System 32, coil, and printers.
    11. Delete everything in this folder.
    12. Return to the Component Services window.
    13. Right-click on print spooler.
    14. Click Start.
    15. If you removed the USB cable, connect. If this is not the case, go back to the devices and printers and click Add printer to add a new queue for your printer.

    Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Printing and scanning doctor

    If you experience any of these issues, you can download and run the print and Scan doctor to help solve your problem.

    Thank you

  • HP Officejet 8620: HP print and Scan Doctor

    A HP technician advised to use HP SCAN AND PRINT DOCTOR link but none works:

    FTP://ftp.HP.com/pub/softlib/software12/COL50849/MP-141412-1/HPPSdr.exe

    http://ftp.HP.com/pub/softlib/software12/COL50849/MP-141412-1/HPPSdr.exe

    Any suggestions?

    Hi Mkcoughlin13,

    Try this: HP print and Scan Doctor

    Yours faithfully,

    Ryan

  • To re - install my web download drivers for my Deskjet F4280 all-in-One Printer

    I have installation problems with my Deskjet F4200 all-in-One printer on my Windows 7, Home Premium desktop PC / 64 bit version & I had, once last month, uninstalled my I bought online for my version of platform & bit of the os, printer drivers & all program of printer drivers have been uninstalled successfully in the programs section and my control panel features except for :
    HP Software IDF.

    I ended up, in addition to the tasks above performed & completed, deleted all files remaining hp of my drive (c).

    I discovered a web page of troubleshooting on the hp.com Web site, under the following title:

    ""Of HP Installer has stopped working "or the installation program does not run when you install under Windows 7 HP printing software"

    on the following web page: "http://support.hp.com/us-en/document/c03030583".

    My processor information:
               "AMD Athlon II X 2 240 processor / 2.80 Ghz '.

    I tried to re - install my drivers for my printer, & have problems trying to re - install, with no luck.

    I have read the following information since the last link web I mentioned (SHOWN above and here @: 'http://support.hp.com/us-en/document/c03030583') trying to follow them to correct my problem exact, but without success.

    If anyone who reads this could have a solution to my problems, please contact me either by one or more of the following methods:

    {Deleted private information}

    Thank you, Christopher Canfield.

    The troubleshoting document you provided a link to not tell to use the hotfix with the processor installed in your desktop PC.

    Have you tried to use the Wizard for Windows HP printer installation?

    I recommend to try it. It can solve the problem you are experiencing.

    If it is truncated, without success, then click on the following link and select Windows 7 from the list provided on the HP document.

    Uninstall the HP printer software.

    Once you have completely uninstalled the printer software and driver, run the HP printer install wizard again.

    Please keep us in the loop by posting your success or lack of success with the installation of the software of the printer here in your thread.

  • Want 7640: Must be able to use the print and scan doctor for each print job to get printing to work

    After works without any problem for several months, the printer now shows an error message whenever I try to print. I have to run the doctor print and scan so that the printer to function. The first time this has happened, he told me I have to uninstall and reinstall the program, I did. Since then, only the works of doctor print and scan running, but he running for each print job is not acceptable!

    Hi @Doug18,

    Thank you for joining the Forums of HP Support!

    I see that you are unable to print, except if you first run the PSDR. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand that you have received the order to uninstall and reinstall the software that you have. When you now run the PSDR, she says you? I need to know the results (of the error messages, patches, etc.)?

    In the meantime, try the steps in these guides:

    Hope that answers your question. Please reply to this message with the results. Thank you for posting!

  • HP OfficejetPro 8600: HP print and Scan Doctor

    My HP OfficejetPro 8600 is not print Word documents.  I tried to download the HP print and doctor Scan, but all the links tell me that the server is unavailable.  So, I was unable to download the tool and cannot resolve the situation.  Can someone tell me how to access the tool?

    Thank you

    Hello

    Try to download the tool from one of the links below, I'm able to download without any problem:

    FTP://ftp.HP.com/pub/softlib/software12/COL50849/MP-141412-1/HPPSdr.exe

    http://ftp.HP.com/pub/softlib/software12/COL50849/MP-141412-1/HPPSdr.exe

    Please let me know if it works for you,

    Shlomi

  • OfficeJet 4620 will not print even though HP print and Scan doctor said that everything is Ok

    I just installed an OficeJet 4620.  I'm under Win 8.

    I printed out the status of the HP printer wizard pages.  They work very well.

    I ran printing HP and Scan Doctor v3.1 and all past.  However, when I try to print the test page, I get an error message saying cannot communicate with the printer.

    When I try to print from a different application, I get the same error.

    According to the Assistant of HP printer, the quality of the signal is a 4 (out of 5)

    Help

    Hi CallMeD,

    I suggest that you reset your network.  Click here to get instructions on resetting your network.

    Once you do this, I would set a static IP address for the printer.  Click here for more information on how to set a static IP address.  This link will be also other suggestions that may be useful.  Let me know how it goes.

    Good luck!

  • HP Print and Scan Doctor do not work and could not be uninstalled

    My inkjet HP8600 Pro will not scan to my computer (Windows OS 8.1).

    Message on HP9600 say no computer even if the cable is connected.

    How can I get HP8600 Pro to recognize my computer with Windows 8.1?  (Note that Windows 8.1 does not have instructions to the HP8600 application.   Computer does not accept the CD HP8600 from Windows 8.1)

    Downloaded HP Print and Sc a doctor who does not work.   Tried to delete HPPSdr but will not remove (enter an endless loop)

    If I need printing HP and Doctor (HPRCD) Scan to run, how to do?    If the HPRCD is of no use, how to uninstall?  (Note: the HPPSdr does not appear in the uninstall programs of the control panel part?)

    Hello Hitmanalpha,

    Welcome to the Forums of HP Support!

    I see that you are unable to scan / install with HP Officejet Pro 8600 Windows 8.1 computer, I would like to offer a helping hand.

    I wish that you run the HP printer installation wizard on the computer to acquire the software, it will download and install for you.

    Which is to remove the PSDr on your computer, you should be able to just drag the icon to your trash can (on the desktop). Of my knowledge and use of the PSDr is not installed on the computer, it will extract temporary files whenever the icon is open.

    If you want to delete temporary files, you can press the Windows key and R on the keyboard (from the desktop) and it will open the box run. Type %temp%, and then press ENTER, search the 7z files and delete them (you can delete all files and folders from here, if you wish).

    I hope this has helped.

    Thank you

  • Black and white printing only problem for Mac at HP6480 all-in-one printer

    Does anyone know how to get the printer to print in black and white only?  As others have mentioned, the printer wants to use the cartridge printing black and white color.  When I explore each print option, drop down menu, question mark, it has no option to reset the printer b & w printing only, even if the summary section lists this option in one of windows printing.

    Have you tried cmd - p of any application, paper Type/quality and in grayscale, choose this menu?

Maybe you are looking for

  • Same image several times in a project?

    Can someone explain to me how I can use the same image several times in the same project?

  • Update Windows 7 auto = data loss

    No device I used the Palm software for more than ten years without ever having a problem.  A month ago automatic updates of Windows closed and restarted my computer.  All my calendar entries, except recurring events have been wiped out.  About a week

  • My message to my wifes Stop iPhone

    My message goes to my wife iPhone too how to prevent that from happening

  • U2713H 10-bit input?

    Hello the specifications are not clear and the user guide doesn't talk much. The LCD is selling 10-bit depth per channel support (aka 30-bit RGB or Deep Color). The User Guide reads as follows: "12-bit internal processing that has tested the HDMI wit

  • Explorer Windows continues to always work and restart.

    Original title: Windows 7. 32 bit. Please, I want to know why my Explorer windows always stop work and restart?