Download this message when I try to run Lightroom. Point procedure entry AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library - system: windows 7 64 bit is no error in the log file

Similar Questions

• Windows 7 64 bit with Abra customer 6.3 error "" point procedure entry GetFileVersionInfoSizeA could not be found in the library of dynamic links VERSION. "" DLL.

  When you try to run Abra Client Version 6.3 on Windows 7 (64 bit) system we get the error message "" the procedure entry point GetFileVersionInfoSizeA could not be found in the library of dynamic links VERSION. "" DLL.  The following error message is "the VFP6R. DLL file is invalid or damaged. "Does anyone have a solution?  We have become very dependent on this old Abra Suite and would not lose him.

  Thanks for the help, Bill.

  I tried the compatibility mode with the same results.  I installed the XP mode software and installed Abra in this virtual network and it works perfectly.

  Take care

  Johnnie

• 5 error message when you try to run gimp - 2.18.16 - Setup could not create the directory

  5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
  Setup could not create the directory
  c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
  Error5: Access denied
  In the Temp folder under Security I have:
  'SYSTEM' with full control
  "Administrators" with full control
  "Username" with full control
  All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
  The two latest downloads gave the same error message.

  Thank you for your time.
  Debbie

  I suggest you do this:

  1. click on the start planet.
  2. type cmd.exe in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following commands exactly and press ENTER after each:
  takeown /f "%Temp%" / r

  Cacls "%Temp%" / t/c/g "%nom user %": F System: F

  (Enter Y when you are prompted "Are you sure?")

• Starting problems. - RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll

  I get the message RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll. What should I do?

  I had starting problems, boot loop, I think it seems to have been resolved by using the last known good configuration, but I get this popup dialog box. I've not closed for fear that it will start XP looping again.

  Hi EddieBryan,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. when exactly you receive the error message?

  Method 1
  Check if the problem persists in safe mode and after return with the result.
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Method 2
  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.
  I suggest that you configure the computer in a clean boot state and check if it helps.
  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  See section to learn more about how to clean boot.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start , then click run.
  2. type msconfig , then click OK.
  The System Configuration Utility dialog box appears.
  3. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Method 3

  If the previous step fails then I suggest that scan you SFC on the computer that will search the corrupted system files and try to correct them.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  You are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker

  http://support.Microsoft.com/kb/900910

• the procedure entry point_CVI_resource_acquire could not be located in the dynam

  Hi, we are using the Labwindows/CVI 8.5, the BNC2090, the NIPCIe-6259. Currently, we find a way to control the analog output voltage as tension - that's our goal now, and you can help me how to communicate with the main program. "" Also, yesterday, we tried to download driver for NIDAQmx 9.0, after uploading, we were trying to "find the example" and opened it but, unfortunately, we had a pop-up message, saying that "the procedure entry point_CVI_resource_acquire could not be located in the dynamic link library cvirte.dll" can you help me how to solve this problem.see for window error the attach file. concerning

  Hi Emmanuel,.

  have you seen this link http://digital.ni.com/public.nsf/allkb/1DB3814D6F552100862570EB00777C1D?OpenDocument

• [HELP] I get this message when I try to launch lightroom

  the procedure entry point AgTransitCargo_pushTransitCargo could not be located in the dynamic link library wichitafoundation.dll

  Can someone help me?

  Thank you

  Hi lakiaf,

  Greetings.

  Lightroom makes a call the the AGkernel.dll file, but the file isn't sure what to do because it can't find the line of code within himself to answer. This can happen for several reasons, that fall within these two broad categories: AGkernel.dll is damaged and must be repaired or AGKernel.dll version is incorrect and should be updated to the correct version.

  Here are some things you can do to fix the file:

  • Re register AGKernel.dll with Windows: https://support.microsoft.com/en-us/kb/249873
  • Windows repair: https://support.microsoft.com/en-us/kb/929833
  • Install all the updates that are available for Windows: Windows Installer updates
  • Uninstall and reinstall Lightroom

  Concerning

  Rohit

• WordPress the procedure entry point currentprocessEplicicitAppUerModelID, Cauld not found Set in SHELL32.dll dynamic link library

  Hello again people

  I am again asking for help. I installed WordPress and when I try to open it I get the following message is displayed.

  {The procedure entry point currentprocessEplicicitAppUerModelID Set

  Cauld not found in dynamic link SHELL32.dll library.  }

  Why I get this as it seems that my windows program is more corrupt or missing actually a pc of important software I use vista

  Try the WordPress support forum.

• Some games gives the error: 'the point procedure entry CtfImmGetTMAEFlags's not found in the library of dynamic links IMM32.dll

  'The procedure entry point not found CtfImmGetTMAEFlags in IMM32.dll dynamic link library.'

  It happens when I'm going to play some games (example: League of legends when a game starts and it comes out of the login screen) and close programs, I can not update windows or recover from a certain date they will fail each time.

  Hello

  Follow the steps in the below link and then try to install the games and check if the problem still persists.

  Method 1: clean boot Mode

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/929135

  Note: After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2: You can try to contact the manufacturer of the game for better assistance, because it is specific to the game.

  Hope this information helps.

• Just bought an upgrade to LR6 and get this message when I try to download: there was an error loading your downloads

  Just bought an upgrade to LR6 (DESKTOP VERSION) and get this message when I try to download: there was an error loading your downloads

  It's very annoying! Anyone know what I need to do?

  Hi HT_photo,

  We will be happy to help you, but before that, there are a few information such as:

  What is the exact error code/message? Please attach a screen so that we can help you better and fast. See, the specified item was not found.

  What operating system you are using the version?

  Until then you can you please consult the links below:

  Troubleshoot Adobe download

  Installation and launch log errors | Adobe Creative Suite 6, Adobe Creative Suite 5.5, Adobe Creative Suite 5

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Let us know if that helps.

• Try to download a trial version of Acrobat Pro, but of course, I have an error message: "the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. Any suggestions?

  Try to download a trial version of Acrobat Pro, but of course, I have an error message: "the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. Any suggestions?

  Download from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html.

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• Get "communication error with kernel" message when you try to run a virus scan program

  Get "communication error with kernel" message when you try to run a virus scan program

  Hello

  What antivirus do you use?

  Follow the steps in the article mentioned below and check if this solves the problem.

  
  The error message "error communicating with kernel":
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280

• When you try to open a PDF from Adobe, I get this message "to the 882 ordinal not found in SHELL32.dll dynamic link library.

  When you try to open a PDF from Adobe, I get this message "to the 882 ordinal not found in SHELL32.dll dynamic link library.  Any ideas on how to solve this problem.  Have Windows Vista.  Thank you.

  original title: problem opening Adobe pdf.

  Hi Gary,.

  Are you facing this issue only when you open pdf files?

  Method 1:

  You can try uninstalling and reinstalling Adobe software and check if it helps.

  Uninstall a program

  Method 2:

  You also try to run the system restore.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following links:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• my Media Player from microsoft says this (symaddln) when I try to run it and stops. What do I need?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! my media player microsoft says this (symaddln) when I try to run it and stops.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Hello
   
  What security software is installed?
   
  This "symaddln" occurs especially if you had Norton installed anti-virus software.
   
  I suggest you follow the steps below and check if the problem persists.
   
  Step 1:
   
  (A) I would say you temporarily disable your security software (if you are using Norton) and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  (B) If you already have Norton Security software before and uninstalled later, there would be traces of which would result in the computer does not normally. I suggest that you use their uninstall/removal tool to uninstall Norton Security software traces.
   
  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN
   
  Step 2:
   
  If this does not help, I would say you put your computer in a clean boot State and check if the problem persists. This could be the result of a conflict of software of third party causing the problem to occur.
   
  Note: Be sure to follow step 7 to start your computer in normal mode.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error message the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file.

  
  

  The error message happens chronically today.

  It does not matter what I try to install the air file.

  I uninstalled, cleaned the registry and all the usual things.

  And then re-installed-with the same error messages

  
  

  Windows 7. Current update.

  processor 2.8 ghz, 12 G Ram - one machine to cook breakfast and make the beds.

  
  

  
  

  " The application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. "

  
  

  
  

  This is the last log of installation-

  I am not able to find out how to decipher what it means.

  
  

  Someone would have noticed?
  

  
  

  [2015-02 - 18:10:58:58] Unpackaging/validation complete

  [2015-02 - 18:10:58:58] no app location to "LocalizerLeadsTool" appID and pubID "

  [2015-02 - 18:10:59:01] conversion of unpackaged to a native installation package in C:\Users\admin\AppData\Local\Temp\flaAA62.tmp application

  [2015-02 - 18:10:59:02] create an installation package Native failed: [ErrorEvent type = "error" bubbles = false cancelable = false eventPhase = 2 text = "unhandled exception error: EndUpdateResource: error Windows #5" errorID = 0]

  [2015-02 - 18:10:59:03]

  I got a response on another area of support.

  And

  Because I asked for help here-

  I think it's the kind of thing to do to post the

  steps that allowed me to correct.

  I knew I had the latest Adobe air platform.

  I felt that I knew that the download files were updated.

  So-

  What was one of the suggestions I've had -

  Told to turn off the firewall and antivirus.

  Instinct made me disconnect the machine from the router.

  I continued and disabled all the protections I had put in place-

  and watched as the first program installed air -.

  Since before January.

  Then put those protections back in line.

  And re-attached the router line.

  It doesn't seem to work now.