Download windows update fails

Similar Questions

• Windows update fails to download and install updates and cannot start defender and windows firewall.

  Original title: windows update fails problems to download and install the updates and windows firewall and defender will also not start?

  Windows update fails to download and install the updates and defender and windows firewall will not also start? What can I do?

  Hi Speete66,

  ·         You receive an error message or error code in Windows Update?

  ·         What happens when you try to start the windows firewall and windows defender? You receive an error message?

  ·         You have any other antivirus software or protection installed on the computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Method 2:  If the method above does not help, then you can reset Windows Update components and check.

  Reset Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know the results.

• Windows update fails to download KB951847 with error code 80073715

  I have the 32-bit version of Windows Vista. Windows Update fails to update the following: Microsoft.NET framework 3.5 service pack 1 and the .NET framework 3.5 Family Update (KB951847) X 86 code error 80073715. This happens again and again. I am also unable to upgrade Internet Explorer because no Windows Vista SP2 installed. But I can't install SP2 until this SP1 error is resolved.

  Hello
  You can try the following methods

  Method 1:

  How to fix the .NET framework

  http://support.Microsoft.com/kb/923100

  Method 2:

  Run a scan of the System File Checker, click the link below:

  http://support.Microsoft.com/kb/929833

• Windows update fails-G62-225DX - bad startup a factory?

  My nephew came to me recently with a G62-225DX HP, concerned about safety.  Given this machine is several years old (recently handed down from his father - I quickly understood why), I was surprised to see she was always being basic Windows 7 Home Premium.  Without SP1.

  My first attempt to resolve this was to run Windows Update - no luck - immediately fails with "cannot run - services is not started.  Of course, verification services, yes I see WU and BITS running.

  So, like any good tech person, I check in the case where the logs and see various errors, including the constant complaints on the Crypto database being corrupted.

  Then, up to be Googling for these symptoms/messages.  I see many people with the same problem and a lot of suggestions on how to fix this (re - reg WU, STRANDS of clear/reset, flush/empty C:\Windows\SoftwareDistribution, catroot2 flush/empty, etc.).  Even seen one on the Intel hard drive problems due to replace it with a drive of more than 500 GB (this unit still has the original 320).

  Spent hours trying all the suggestions there, especially when people said 'Yes, that fixed', nothing helps.

  Since it was not something of value on this machine, I decide backup and restore "factory".

  Imagine my surprise when, after reset of the image 'factory', it has exactly the same problem - Windows Update fails, out-of-the-box on the right!

  I think to myself, it's crazy.  The machine is faulty from the start and everyone was naïve to not get Windows updates, AT ALL!

  I even decided to try the Windows Update Checker (supposed to perform before installing SP1) and it fails with ' Windows Update Standalone install encountered and error - 0xc80000247 ".

  So, I decided to run through the suggested fixes (from M$, no less) and all of a sudden, that Windows Update works.

  I thought, it's fantastic.  He immediately calls to > 130 fixed critical.

  After a few hours of download and installed, I restart only to get a BSOD - STOP 6 b - AAARRRGGGHHHH!  Tried to go through Windows restore previous checkpoint but that too fails with a mysterious error.  In addition, many Google hits on the 6 b says that it's a hardware problem.  But he was executed until the Windows update, with nothing in the case where newspapers to indicate hardware problems.

  Then, I decided to do a restore from the image of what I started with.  At least it ran, even though she could not be updated.

  I no longer dig and see a bunch of updates to the firmware/software for this machine, including the BIOS.  Even saw some strange 'Windows updates' HP.  I thought maybe it was something like the fiasco when the power management update for Intel processors had on machines AMD, thus paralyzing them!  Still nothing - WU still does not work!

  Tried again to return to the original image, hoping that maybe to install all updates of office/hardware/driver on a virgin machine solve the problem.  Nope-WU still does not work.  Even went back through all the suggested fixed (saved as .bat files everthing).  Nothing, nada...

  So, I'm posting here in hopes that someone has a miracle cure that I missed.

  Hello:

  I don't have a magic bullet...

  The same thing happened to me while working on a friends HP 8100 Elite CMT, Windows 7 Pro, HP original image.

  Would not install SP1 or Windows updates. I tried every trick in the book and after spending more than two hours, going nowhere, including restore from the recovery discs, I decided to install a plain OS W7 clean add drivers myself using the product key for W7 on the PC.

  It has worked well.

  You can do the same thing if you can read the product key of W7 on the bottom of the laptop, and your nephew can't live without programs that was shipped with the PC.

  In addition, if you format the drive and just install W7 on current partition, you can probably find the program of the installation files for the programs supplied with the PC in the SWSetup folder.

  Here's how to do when you don't have installation of W7 media.

  Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

  Use the product key of windows 7 of 25 characters to activate your installation.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

• "Error code: 80070002 0 x ' OR"0 x 80070003"Windows updates failed?

  " Error code: 80070002 0 x ' OR"0 x 80070003"Windows updates failed? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution for the error Code: 80070002 0 x ' OR '0 x 80070003 '.

  To resolve this problem, remove the download directory and then to return to the update sites. To do this, follow these steps:

  1. Stop the automatic updates service. To do this, follow these steps:
     1. Click Start and run, type services.msc, and then click OK.
     2. Right-click the automatic updates service and then click on stop.
     3. Minimize the Services snap-in.
  2. Rename C:\Windows\SoftwareDistribution directory. To do this, follow these steps:
     1. Click Start, run, type cmd, and then click OK.
     2. Type cd %windir%, and then press ENTER.
     3. Type ren C:\Windows\SoftwareDistribution SDTemp, and then press ENTER
     4. Type exit and press ENTER.

     Note When you delete the folder % windir%\softwaredistribution, the history list is erased from the "Review your Updates" section of the Windows Update Web site. This action will not affect the updates installed on your computer. Subsequent updates will appear in the history list.

  3. Start the automatic updates service. To do this, follow these steps:
     1. Expand the Services snap-in.
     2. Right-click the automatic updates service and then click Start.
     3. Close the Services snap-in window.
  4. Visit the Windows Update Web site, Microsoft Update Web site, or the WSUS server again, and then download an update.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Windows Update fails, try to install paths

  Windows update fails when trying to install kb976884,
  KB974234 and kb974810 in Outlook 2007. The error code is 80070641. ¿Could someone help me please?
  Thanks in advance and best regards,

  Try searching for these updates in this link: http://www.microsoft.com/downloads/en/results.aspx?freetext=kb976884&displaylang=en&stype=s_basic

  Download these update by searching in the link above
  Save it to the desktop and try to install them that should help you ;)

• Windows update fails with error code 57 (KB951847)

  Windows update fails when it encounters an unknown error while trying to install the following:

  Microsoft. NET Framework 3.5 Service pack 1 and. NET Framework 3.5 Family Update (KB951847) x 86

  Installation date: 13/11/09
  Installation status: windows has encountered an unknown error: code 57
  Update type: important

  Recently, I made a recovery of the pc and reformatted my entire hard drive to the issuance of the plant.  Yesterday, I downloaded a standalone installer (KB947821) to see if that would help.  He did not.

  I would like to have instructions step by step on how to obtain this update to install correctly.

  Thank you

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  ===============

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785

  Step #2-online now see resolution method 2 in...

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows Installer '1603' (ignore the title, if necessary)
  http://support.Microsoft.com/kb/923100

  After running the tool that is appropriate and necessary, (re) install all versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 SP1 by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 SP1, reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Unable to download windows updates

  I am not able to download updates of window he comes back with error code 0 x 80070426 also could not down loaded security patch #2 also when I pull the Control Panel, it comes in white. thanking you in advance for a simple and effective solution for a novice in computer science

  Hello

  Start a free incident report:

  Click-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  and follow the instructions.

  Good luck.

  Rob - bicycle - Mark Twain said it is good.

• I can't download Windows updates. I received the error code 802400036.

  What is error code 802400036? I can't download updates. I am running Win XP Home Edition with SP2.

  Bless you for any help.

  Ted

  Ted,

  Windows update fails with error code 0 X 80240036

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-update-fails-with-error-code-0x80240036/abfc39c2-DA23-43df-bfff-71afcb1dff0f>

  You will need to install SP3 (if it is not already installed) and then maybe you will get on the website for further updates.

  UTC/GMT is 18:07 on Wednesday, August 8, 2012

• Windows update fails on XP Pro SP3 with 0x8007F064 error code.

  Windows update fails repeatedly on XP Pro SP3 with 0x8007F064 error code:

  Update security for Windows XP (KB2661637)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2647516)
  Update security for Windows XP (KB2660465)

  Update works fine until yesterday. Microsoft tool ran (no change), reloaded Windows Update (no change), a tool for malware own virus check comes to nothing. Any ideas?

  Since it is a Dell computer, chances are a Norton or McAfee free trial is preinstalled. When you have done the clean install, the free trialware would have ALSO reinstalled (but not valid now).  Let's see if the execution of two removal tools & a few tweaks resolves the behavior.

  [You can print these instructions for reference offline. [If a step said to restart, restart! ]

  1. click right on the following link to download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. right click on the following link to download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »). [1]

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  If you return to check the out parameter #1 above, it'll be "Use my current..." "but now it's going to be"point"to IE so that you don't need to change anything or reset. [Think of it.]

  5. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it.

  6. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  7. IMPORTANT - don't SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 of => [ignore the title & symptoms].

  7B. do disappear/close the troubleshooter automatic pop - up; then...

  7 c. run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  8 restart once more.

  9. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you can install all the available now security updates (i.e., KB2660465, KB2647516 or KB2661637).

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8. [3]

  Tip: Do NOT install any other updates software optional or any updated material in option .

  10. in response to this post with a status report.

  Good luck!

  ==================================================
  [1] once you get the missing updates installed, do not hesitate to make Firefox default browser.

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  [3] MS provided the distribution of a new version of update root certificates on Tuesday, 28 Feb-12. Until then, the update root certificates , released on 22 Nov-11 will be offered. MS usually new versions of root certificates update releases every 3 or 4 months.

  [Last updated - 24 Feb-12, 19:47 UTC]

• C8000643-error Windows Update fails to check the fo updates

  Original title: Windows Update fails to check the fo updates.

  I receive the error code c8000643. Anyone have any ideas?

  Hi kycats04,

  You can try the steps listed and let us know the results

  Method 1: Windows Update works not.

  http://support.Microsoft.com/kb/555989

  Method 2: Update of the system for Windows Vista tool

  Click on the link, download and run the file

  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=504

  Method 3: Use the System File Checker tool to solve system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Windows update fails to install KB2656368 and KB2686827. Get the code641 error

  Original title:

  Windows update fails to install KB2656368 and KB2686827

  I am running Vista Home Premium.  Windows update fails to install KB2656368 and KB2686827.  Download error code641 which seems to mean that Windows cannot identify the problem.  In the past, it was caused because the installer has been damaged.  In setting the Microsoft Support took control of my computer; Download a new installer and solved the problem.  However, it seems that there is no way of contacting Microsoft Support for them to fix the installation program.  The installation program be fixed right now.  Moreover, the tool "Fixit" said that everything is fine.

  Microsoft paid $99 for the support.  Tech uploaded a new installer.  Problem solved!

  Still wondering why the question about System Mechanic?

• Windows Update failed - error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332)

  Original title: Windows Update Failed - need help

  Vista 32 Ultimate with all updates, until this one: update Windows failed: error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332). Update has failed repeatedly.  I tried to restart, remove the update (even by deleting the file so it would download it again) and install again.  Nothing has worked.  Error 80070643.  Since it is not Office 2003, the error seems to mean a problem with the Windows .NET framework.  Don't know what that means.

  Looking at KB976982, I tried to fix MSI software update registration corruption issues (whatever that means) by running the automated Fix It by KB971187. Restarted, I tried Windows Update again.  Still didn't update.

  Then, I waited two days and tried again.  Even that did not help.

  I tried bypassing Windows Update simply by downloading and then run the file SQLEXPR32.exe from Microsoft downloads. Did not work at all. I then tried to run it as an administrator (even if it was already an administrator account, with no other account on this computer at all).  He started to run and then gave me the following error message: unable to run the SQL Server System Configuration Checker due configulation WMI on the computer.  Error: 70347 (0x112cb).

  Now I'm really confused.  On the one hand, 80070643 means I probably repair the .NET framework, which certainly, I hate to do because I need several versions of the .NET framework first uninstall and then try to install the compmonents, and I'm afraid something would go wrong.

  On the other hand, the 70347 (0x112cb) error message seems to indicate the problem is completely different and has to do with WMI, which probably has to do with permissions and I have no idea how to solve this problem.  (And why it all of a sudden would be any problem with permissions?)  This computer is not on a corporate network and has only one user account, the administrative account).  I have looked at Services and Applications in computer management, where there are WMI control, but nothing shown that I can possibly change and not the SQL Server Configuration Manager under it, which doesn't seem to have much either.

  Help!  Please...

  And now I also tried to fix it, just in case where, the .NET framework (Panel > programs and features > Microsift.NET framework Client profile 4 > uninstall/change > fix it), and the Windows Update tried again (including reboot).  Still no.  Everything I try, it is not to do nothing, pardon my language.  People smarter than me, pleasehelp!

  Hi stupID_,

  «Error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332).» Update has failed repeatedly. »

  As the error relates to SQL, perhaps this forum:

  SQL Installation of Server & upgrade
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• When tryting to download windows updates, I get an error of 646.

  original title: when tryting to download updates of windows I get an error of 646. There is a link, but the mistake is not found. There are six updates which will not download into my computer. Can you help me solve this problem?

  Windows Update

  Hello

  Try to disable UAC and then make below.

  Panel configuration-Classic view - user accounts - turn User Account Control Off

  How to turn User Account Control (UAC) on or off in Vista
  http://www.Vistax64.com/tutorials/48893-user-account-control-UAC.html

  THIS UTILITY MAKES IT EASY TO

  http://www.tweak-UAC.com/
  Tweak UAC utility - easily put UAC into Silent Mode or POWER

  ------------------------------------------------------

  After the foregoing:

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups
  who might have experienced the same problem.

  Office Microsoft Answers forums
  http://answers.Microsoft.com/en-us/Office/default.aspx#tab=1

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Window updates fail

  Hello

  I tried pretty much everything I could find on how fix the window updates failed.  So far, nothing has worked.  I'd be willing to try a second or even a third time with solutions if someone is willing to help.  Updates, download and install.  But the computer is restarted, Windows fails to configure updates and changes are returned.

  For now, the updates failed are:

  Update cumulative security for Internet Explorer 10 for Windows 7 Service Pack 1 for systems based on the x 64 (KB2976627)

  Update security for Windows 7 for x 64-based systems (KB2868626)

  Update security for Windows 7 for x 64-based systems (KB2871997)

  Update security for Windows 7 for x 64-based systems (KB2973351)

  Update security for Windows 7 for x 64-based systems (KB2993651)
  Update for Windows 7 for x 64-based systems (KB2973337)

  Internet Explorer 11 for Windows 7 for x 64 systems

  The error codes are:

  KB2868626 error Code: 800F0826

  KB2976627 error Code: 80073AA2

  KB2871997 error Code: 800F0826

  KB2973337 error Code: 800F0826

  KB2973351 error Code: 80073AA2

  KB2993651 error Code: 800F0826

  Thank you.

  As a measure of protection I suggest that you take the precaution to create a system restore point before editing the registry, to guard against unintended consequences. Select Start, Control Panel, system, System Protection, and then click Create.

  Select Start, run, type regedit and press the ENTER key. Navigate to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT

  As an additional guarantee, right-click on WINEVT and select export on the menu drop-down. Name the file and note the folder where it is located. Then, you can cancel the action later by selecting file import in Regedit and bring the exported registry key.

  Now, delete the contents of the WINEVT and restart your computer and try Windows Update again.