DPP4 will correctly process RAW images using a 70 d and Sigma 120-400 mm lens?

Similar Questions

• I have photoshop CS3 and want to be able to process RAW images taken by my Canon 70 d and Olympus TG-4, which says it does not support these cameras.  How do I update CS3 then it will develop images in Raw on their part?

  Can someone tell me how do to be able to process RAW images in CS3 from my Canon 70 d and TG4 Olympus?

  You can not. RAW support is specific version and you are far behind the times to support any reasonably modern camera.

  Devices supported by Camera Raw

  Applications of camera Raw compatible Adobe

  Mylenium

• Jpeg images LR edit in PS, but will not open raw images

  Good day, LR, I can use (Image/Edit in Photoshop 2014) and JPEGs open in the editor of camera raw.  Don't leave no not what I expected, but ok.   When I use LR (Image/Edit in Photoshop 2014) on image raw, CR2 files, photoshop opens but the file is never open in PS or the 9.0 of Camera Raw.

  Troubleshooting:

  * Checked several times and all appllications, CC, CR9.0, PS2014 and LR 2015 are up-to-date.

  * PS is open directly the raw, CR2 file in Camera Raw 9.0 without difficulty... as expected.

  I have a few Miss configuration set?   Although I'm only active every two weeks or if it is a new challenge.

  Thank you, Marty

  Evening Gents,

  With the help of Udit Tuli teriffic to Adobe support, we were able to correct the problem.   He took control of my system and was able to see the question of LR jpeg files can be opened in PS but raw (CR2) images would launch PS but the images would not open in the application.   Udit carefully entered the directory structure and set asside the customization files for guard duty.   Then using the application of Creative Cloud it only uninstalled PS and then reinstalled PS it took time but once the problem has been fixed and my customization has been preserved... all very friendly and I am extremely grateful.

  Marty

• I did not receive any cd/dvd with my alpha 3000. How to make a so that I can process Raw images?

  My current processing software, Corel PhotoPaint X 6, will not process the Raw files of my new Alpha 3000. Sony support, I read that there are programs to manage the latter on the disc supplied with my sony camera. However, no disc came with my camera. How can I get a?

  Glenn Runyyan

  Hi gsrunyan, please check the link below to download the application: Sony® Image Data Converter (version 4.2.02) which will allow you to convert RAW files.

  http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=ILCE3000KB&upd_id=8260&os_group_id=23

  So you can click on the link below to find out how to convert the files after you install the software on your computer.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/33712/c/65, 66/kw/raw%20files

  If this post answered your question, please mark "accept as a Solution.

  Hector.

• My SP6 will not open RAW images, and when I try to update, it tells me that updates may not be applied. Any suggestions? Please, it is very important, I have this problem as soon as possible.

  I would like to edit RAW images in Photoshop, but I get an error message saying that the file cannot be opened and to make sure that I have the updates. But when I try to update, I get another error message tells me that impossible to apply the updates. I need this problem as soon as possible and I'm going crazy trying to figure it out. Any help out there?

  Try these links:

  Failed installation. Error U44M1P7 | Updates

  Cannot apply the update of the Extension Manager CS6 - error U44M1P7. Mac OS

  If the two do not work, consult this thread Re: error update CS6 Production Premium especially the last answer.

  Hope this will help you.

  Kind regards

  Hervé Khare

• I bought a new camera, Nikon D3300. LR5 will not open RAW images. JPEG only. No problem with the previous D3100 cameras don't od Canon S95

  How can I open RAW images in LR5 of

  my new camera? D3300. no problems with other devices. He tells me, preview not available for this file

  D3300 needs at least 5.4 LR, the latest version is now 5.7. Its a free update.

• How to change a large number of images using CSS in HTML5 and CSS3

  I have a CSS image gallery that displays a larger picture with descriptive text underneath, a thumbnail image is hovered over.

  Each photo has code like the following:

  < a class = "thumbnail" >

  "< img src="thumbs1/paradethumbs/DSC_0073.jpg "alt ="thumbnail"/ >

  "" < span > < img src="pics1/paradepics/DSC_0073.jpg" alt = "" / > < br > 19 - a black face sheep. " </span >

  < /a >

  The first source is an image thumbnail, stored at a size of 72 by 48.

  The second source is an image stored at 600 x 400.

  When the thunbnail is hovered on, enlarge the photo is displayed to its size using css.

  There are 20 or if thumbnails in this gallery and different numbers in the other galleries that use the same code.

  The above example is number 19 of 20.

  This works very well on tablets and large screens.

  When I want to show it on an Iphone or similar, with a screen that is 480 or less wide, I need to enlarge it up to 300 large scale.

  The Iphone will have a lower quality of the image to a larger screen, it won't matter too much if photography 600 x 400 is reduced, and after having tried giving him an ID with CSS as

  #imagescale {width: 300px ;} seems acceptable.} However, as the ID is supposed to be unique, then it's a no go area for the remaining photos.

  My problem is how can I select the second source of the image shown in bold above and scale it and reach of 50% text.

  The text is not too important because it can be modified to fit - the image is the main problem.

  I need something like "If the display is less than 600 and the image is located in the directory of photos, it shows 300 offshore."

  I hope that the browser will take care of the height.

  Any suggestiosn would be appreciated.

  Howard Walker

  Unlike #IDs, the .classes can be used multiple times per page.

  Use the questions from the media and an external CSS file for portable devices,

  http://www.Adobe.com/devnet/Dreamweaver/articles/dw_html5_pt3.html

  CSS:

  . {img full-size}

  Width: 50%;

  height: 50%;

  }

  . Full-size {make-size: 50 %}}

  HTML:

  class = "life-size"> 50% of size

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

• Watermark image using the infectious BOVINE and Imagemagick rhinotraecheitis

  Hi all

  We have an obligation to create an image with a watermark text rendering. We use ImageMagick for conversion and have installed FreeType delegated in the Linux box. normal conversion by using the resize command works well, but after using the--draw the fate/police command, I get the error that is mentioned below

  Starts to create the 'MediumWatermark' of type 'Extra' rendering

  Create a rendering with the command: / usr/local/bin/convert - resize 352 x 300 > - fonts - draw 'fill South white text 0,0 'copyright' gravity' "/ OraApplBin/Oracle/Middleware/user_projects/domains/base_domain/ucm/ibr/vault/~temp/qaecmnode116200/1466/2462.jpg" "/ OraApplBin/Oracle/Middleware/user_projects/domains/base_domain/ucm/ibr/vault/~temp/qaecmnode116200/1466/mediumwatermark3/mediumwatermark.jpg".

  The rendering of the 'MediumWatermark' failed. The engine has reported the following error: "convert: cannot open the image" gravity South fill text white 0,0 ' right of author ": @ error/blob.c/OpenBlob/2584.

  convert: no delegate for this image format decoding "" gravity South fill text white 0,0 ' right of copyright "@ error/constitute.c/ReadImage/532." "

  Finished the return 'MediumWatermark '.

  Below is my extraRendition_definitions.hda

  ImageMagick = / usr/local/bin/convert

  ImageMagic_Watermark = resize 352 x 300 > - 24 draw - fonts - pointsize

  @ResultSet ImageLibrary

  6

  extRenditionName

  extEngine

  extType

  extSourceFile

  extParameters

  extDescription

  MediumWatermark

  < $ImageMagick$ >

  Additional

  < $InFilePath$ >

  < $ImageMagic_Watermark$ > "gravity South fill white text 0,0 'copyright'" ' $inFile$ of <>"" < $outFile$ > .jpg.

  Average 352 x 300 pixels with watermark rendering

  @end

  Mentioned below, it is the delegates settled for ImageMagick

  TIFF of DELEGATES freetype jpeg

  
  

  I am capable of the same covert by using the command line
  

  converted - resize 352 x 300 - fonts - pointsize 24 - draw "gravity South fill white text 0,0"abcd"" input.jpg output.jpg

  Kindly help to solve the problem above, please advice if I am absent from all configurations.

  Thank you and best regards,

  Bryan

  Infact, is how I did it:

  ImageMagick = / usr/local/bin/convert

  ImageMagic_Watermark = resize 352 x 300 - pointsize 24 - draw "South of gravity fill white text 'copyright' 0,0 '.

  @ResultSet ImageLibrary

  6

  extRenditionName

  extEngine

  extType

  extSourceFile

  extParameters

  extDescription

  MediumWatermark

  <$ImageMagick$>

  Additional

  <$InFilePath$>

  <$ImageMagic_Watermark$>"<$inFile$>"  "<$outFile$>.jpg"

  Average 352 x 300 pixels with watermark rendering

  @end

• Sony a7r 2 will not transfer RAW files using lightroom for seagate HD.

  "The files are not recognized by raw format support in Lightroom.

  Very frustrating, attempted several times.

  I got this a7r2 from Sony for a short period.

  Then you need a more recent version of LR. the one you have does not support this new Sony camera.

• Not clear about how to move changes to RAW images using side car files

  I have Lightroom 5.6 running on my Windows 7 and Lightroom 5.6 office running on another computer that has Windows 8.1. If I copy a picture with his side car file to the second computer and import them into Lightroom, only the sides come with the image; None of the fixtures e.g., culture, exhibition, etc.

  Without doubt, I wait or more the car lane side or miss a step.

  Thank you in advance...

  Todd

  In the develop module, go to the menu picture and choose the option "read metadata from file."

• Laterally, IPhone video clips will play in WMP, rotate using Live Movie Maker and the file will not play on WMP

  It is perhaps one of the most common glitches in WMP, but MS is so confused, there is no solution (codec) to set the Iphone vids vertically in WMP.

  When you follow the web tutorials to rotate the clip using Live Movie Maker, it records the video to the format .wlmp that won't play in WMP.  So if you try to publish a movie there no option but send on Youtube or add Codec, which opens a page of gibberish, or when you try to save the film each option results in error "the device is not ready".

  If a guru of SevenForums cannot browse this intuitive nonsense, how millions of average users who find WMP plays videos of the Iphone on the side, while MS allows their ignorant WMP like some stubborn dinosaurs blunder?

  Hello

  This behavior can occur if the video was recorded in landscape mode.  You can see the link given below the similar question.

  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/4419e884-0C35-493b-8399-4b0db1d77162

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photoshop does not open Raw images with my new camera Canon 6 d help! I use Photoshop CS5 extended version.

  Hello

  I got a new camera and Photoshop and Lightroom will not open Raw images with my new camera Canon 6 d help! I use Photoshop CS5 extended version. and Lightroom 3

  Good and bad news:

  The bad news is you need CS6 or later version to open 6 d RAWs. (The 6 d did not support until Camera Raw 7.37.0 was created in CS6;) You can choose to upgrade (I recommend CS6 to jump and go straight to 2014 CC for $10 / month) * GOLD *...

  .. the good new is that the DNG Converter can help you convert your RAWs in DNG for CS5 and Lightroom 3.

• Just upgraded to Lightroom 6 but I'm unable to open RAW images. [Correction to Canon 80 d]

  I've upgraded to Lightroom 6 in support of my new camera (Canon 80 d) but I'm unable to open RAW images. Can someone help and tell me what I'm doing wrong please? Thank you Sandra

  You need LR 6.5.  When you first install LR 6, he moved to 6.0.

  Try to download and install the LR 6.5.1 patch here:

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-downloads.html

• Generate 'raw' images in ACR?

  I work with "raw" images using custom software, and I would like to be able to transmit images processed in ACR in my software.

  I currently need dng images and raw owners images (for example cameras direct) in my software. I want to treat a raw (from camera, e.g. NEF) image in ACR, and then save this image in dng, to spend in my software. However, when I look at the dng in ACR-saved (transformed), I find that raw pixel data in the DNG are * not * changed. I suspect that changes in ACR is stored in the dng metadata when it is registered in ACR and are only 'applied' the raw pixel values when it is interpreted by appropriate software. Is this correct? And if so, is it * all * way to produce an ACR dng file processing in which raw pixel data * is * changed? for example, so that the results of the treatment are visible when the dng format is seen in RawShooter for example? Optical distortion correction treatment I do in ACR.

  I suspect that changes in ACR is stored in the dng metadata when it is registered in ACR and are only 'applied' the raw pixel values when it is interpreted by appropriate software. Is this correct?

  Yes.

  And if so, is it * all * way to produce an ACR dng file processing in which raw pixel data * is * changed? for example, so that the results of the treatment are visible when the dng format is seen in RawShooter for example?

  Since the response of two, the first question is Yes, which naturally implies a number for the second. You can save a DNG demosaiced, which is essentially a TIFF file. That's what DxO used to (and still does) when correction lens RAWs to other converters.

• Difficulty of positioning of the images using widgets

  First, I will start by saying that I really, really, really want to love this program and work with it regularly. I've been an evangelist for her and love the whole proposition that a design for the Internet much less expensive and much more intuitive. So thanks, Adobe for doing things in the right direction.

  That said, I think Muse is always incredibly full of bugs, and working with her is far from being as smooth as it should be now that users are required to pay a monthly fee. I'm still on the fence about whether to take the plunge at the end of the 30 day trial. (Resolution of this case will go a long way to convince me.)

  Widgets have proven one of the tools more difficult to manage in the arsenal of the Muse, which is what brings me here tonight. The problem I have is the scaling and positioning of the images using the slide show - and have it stay like that.

  I am able to move the image of Heroes (largest) then it is placed and scaled properly, but I can only do this with a single image at a time. As soon as I'll do to evolve a second hero image to match the first one returns to the default size and the introduction and the second is correct.

  As shown in the first selection of the screen, the image of hero on the right is sized correctly to align with the top and bottom of the thumbnail grid.

  

  But it will happen only this trick once. All other images of Heroes change size, move to the Center or the float everywhere where they wish, as shown below.

  

  It is a model that is extremely frustrating, and if cannot be resolved, I'll have to give up Muse as the solution to this design problem.

  Help, please! (Thank you.)
  

  
  

  
  

  OK, I finally diagnosed the problem, the solution was not very intuitive. In fact, I realized only the answer when I went on the site for export as HTML.

  Because the images of Heroes was put across the slightly larger that the suggested size, I discovered that if you go to the assets Panel and right click on the title of the image (which has a small plus sign next to it to indicate the difference in size), it invites you to "import more large size of the image" (maybe this isn't the precise language (, but it is an option that sounds almost exactly like that).

  Once you do this for each image, they are no longer returned to the small size or random placement. They're going where they are supposed to and they seem to stay there.

  So I'm happy to announce, case closed.