DPRJournal INSERT event not triggered by the execution of the synchronization process

Similar Questions

• Database alert is not triggered when the Oracle database monitor by mistake.

  Hello

  Database alert is not triggered when the monitor of the Oracle database by mistake. If we test the alert manually alert works correctly. Could someone let me know the solution for this.

  This isn't a question of PC or operating system. You should post your questions in the forums of Oracle database.

• Firefox is already running but is not responding. The old process of Firefox must be closed to open a new window.

  When I try to open Firefox, I get this message:
  "Firefox is already running but is not responding. The old process of Firefox must be closed to open a new window. »
  I then clicked close firefox, but the problem was solved not so I uninstalled and reinstalled firefox, but it's the same thing.
  At this point, I went to support Mozilla and tried the steps described in the article, "Firefox is already running but is not responsible for - How to fix error message", but the firefox.exe process was not in the processes tab in windows Task Manager. While he was in the Details tab, when I tried to put an end to the process, I received this message:
  
  "The operation could not be completed. Access is denied. "

  What can I do to fix this?

  Thank you.

  Usually when you stop and restart Windows, Firefox is not running and can be started normally.

  Firefox is set to start automatically with Windows? Microsoft has a utility to investigate what is set to happen at startup: https://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  It is possible that something is triggering a process in your default browser and it is the hanging of Firefox. You can try to change your default browser to IE (IE can offer to do when you start) before the shutdown and restart Windows to see if it makes a difference.

• 'Manage account' does not appear in the Synchronization Options - how can I fix?

  'Manage account' does not appear in the Synchronization Options - how can I fix?

  It will be great if you could share a screenshot of what you see.

  What you trying to do?

  You have already set up your sync account? This is the only case that comes to my mind that prevents you to see the drop down menu. Take a look at this article and let me know if it seems familiar: How can I set up Sync on my computer?

• In my laptop that is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help out me

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: in my laptop is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help me.

  I have seen at redistry Edit it's explorer.exe in winlogin sell attribute.

  Hi HiteshAstan,

  one) don't you recall making any changes to the computer before this happened?

  (b) what exactly happens when you sign in to your account?  You get a specific error message?

  Step 1: Let us check if the problem persists in safe mode

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

   

  If the problem persists, you can deduct that the user account is corrupted

  Step 2: Create a new administrator account and then try to repair your user account

   

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  After the back if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have windows 7 key to business, how can upgrade to windows 10. I see that it is not included in the upgrade process

  I have windows 7 key to business, how can upgrade to windows 10. I see that it is not included in the upgrade process.

  In some forum I read, I can upgrade with a small charge for windows 7 ultimate, and after that I can move on to W10. Someone can tell me where and how do I upgrade to W7Ultimate?

  Thank you

  Windows 7 Enterprise is a volume license customer, it is not eligible for the free upgrade offer. If you have Windows 7 Enterprise through your employer, contact the network administrator or your Help Desk Support staff for more information on the upgrade to Windows 10 company.

  If you need Windows 10, you can purchase one license other wise, then perform a custom installation. You will need to reinstall the drivers and applications and also to save your personal files.

• BPEL 2.0: Normally answer the synchronization process, but the rollback transaction statement

  Did not know where to place the question

  BPEL 2.0: Normally answer the synchronization process, but the rollback transaction statement

  then post a link here as well.

  TIA,

  A.

  Hi there is community,

  just guessed myself. The solution is mentioned in the documentation - look @ https://docs.oracle.com/middleware/1213/soasuite/develop-soa/bpel-transaction-semantics.htm#SOASE85811 table 13-2 BPELCaller called BPELCallee that has bpel.config.transaction set to requiresNew.

  What I did:

  1A added another BPEL to call my the original (as mediator)

  2. my original BPEL has been configured with bpel.config.transaction = requiresNew. What original BPEL processes is to start its own global transaction, other than the one initiated by my caller process that has been suspended.

  3. in my original BPEL in the case of exceptions or abnormal situations I launch/recovery flaws of the company. According to the documentation, this cancels the new transaction (from my original BPEL). The exception is caught by the calling process and appropriate response is generated on my composite consumer. The data is correctly saved (not) in the DB.

  See you soon,.

  A.

• Tap not triggered if the interaction has begun the upper bezel of the events

  Hello

  I develop a HTML5 / game WebWorks. The user must touch and move items to complete the game.

  I noticed, that when touch starts from the upper bezel and the finger moves down on the screen, no key event is fire.

  If something is near the top of the screen, it is actually quite common, the Unit considers that a key started the bezel, and the app is completely unaware on the finger movement.

  Is there a way to tell the webworks engine not to consume the events if they left the upper bezel?

  They all get fired if I touch the bezel left / right.

  I would appreciate greatly any help!

  Just as a reference: I managed to make it work, so that I have revceive touch events even if the interaction begins the upper bezel.

  I've converted the hybrid application and push touch events form cascades to the WebView control. There is a lot of work, but it can be done .

  Best regards !

• Subsequent event not triggered?

  I have a MAIN VI and VI SUB who communicate through control refnum events. sequence of events is as follows.

  (1) void / vi changes a value in its control and this event is handled in the main vi (this works)

  (2) main vi in response to the event changes one of its control and fires an event to the event handler itself that is managed in the handler of sub - VI.

  the first phase is completed. now, the main vi runs a while loop and the sub vi runs in loop a while and main vi triggeres an event each ~ 150ms. that should be handled in the Subvi. This is the part that does not occur. I can see the main vi updated control, but (if generated) event is not handled by the Subvi. I use node-> (signalling) the Value of the property of the control to change the value and the firing of the event. what may be the possible cause?

  hope my question is clear.

  I found the problem.
  the subsequent events were not carried because the loop in which the event handler ran in a loop * once *.
  That is, the initial condition was itself false then the loop only ran once.
  This loop was controlled by ' stop if true '. He had to be 'continue if true'.
  the Boolean variable that controls this loop was real. This should have been my first clue.

  Sorry for the inconvenience

• PS to cancel event not triggered?

  I have a problem with some events that are not triggered

  Events 'Cancel '.

  __event. Data = "1970168943";

  __csInterface.dispatchEvent (__event);

  __csInterface.addEventListener ("com.adobe.PhotoshopJSONCallback" + __event.extensionId, psCallBack);

  but nothing is triggered

  What is wrong with him?

  The undo event is never sent. Otherwise, we would have a complete panel of history and actions in record mode. You can send the event but you may not listen to.

• What type of event is triggered when the Panel is collapsed?

  I'm working on an extension and I hit a dead-end. It seems that when you click on the Control Panel, a type of window.loaded event fires. But what type of event is triggered when reduce you the rear panel in the shape of the icon?

  I want to link the serialization to the window.unload or window.close event, but nothing similar seems to work, which means that such an event is not raised.

  Any ideeas?

  Hello

  Our next version of the CEP will include support for resizing by program an extension and receive events when the visibility of the Panel has been changed for example just collapsed.

  Kind regards

  LEA

• condition tag applied to insert to insert text not hiding all the Insert

  Hi all

  I am running FM12.0.2.389 on Win7-SP1 (64-bit) laptop with i7 & 16 GB of RAM.

  As Arnis had mentioned on a post on the use of tags condition with tables, applying the condition for the character of point tag insertion conceals the entire table when you hide that tag. It's the way I always saw tags condition applied to the insert text, too much work. However, this is not what I see now, but I don't know if what I'm seeing is "as expected" typical behavior, or a new change since FM9 (jumped FM9 FM12), or if there is a problem with my installation of FM. "."

  Here's the scenario: I have FM files that serve as overlays of text in multiple documents ("insert FMs" for clarity). The entire library of files FM has deployed several condition tags and variable to accommodate more boundaries between nearly identical products, U.S. / International English and more short documents output the same set of source files. For the sake of discussion, I'll use an example which includes 4 labels of condition:

  • 3D (specific products)
  • LI (specific products)
  • Kit (specific output)
  • Installation (specific output)

  Insert FM has 3D and LI tags as appropriate. Container FM has 4 of all labels in the game. The tag is the FM Kit insert insert text for the Insert marker. When I'm running Kit, I can show 3D or LI and achieve the expected results. However, when I hide Kit, text inside of the FM which is tagged with insert regardless of the specific tag always present, even if the rest of the FM in medallion is hidden. I am pleased to provide you with a ZIP of the files needed to use as a sample.

  I don't remember ever having this problem in FM7 or FM8 FM9. (I was a user of FM since the FM5.5 and the use of tags condition since FM6.) Is this normal? Is this a change designed as? Or am I facing a sort of weird corruption of my particular FM installation?

  Thank you

  René

  Hi René,.

  A text overlay behaves in a similar way to a table. It is anchored at the insertion point, and you apply the condition to the anchor to condition it. When you apply the condition to the Insert, all content conditionally marked in the box becomes a combined condition, i.e. the Insert with 3D and conditions of LI now has Kit, Kit & 3D and conditions of Kit & LI.

  Therefore, you have to build the Boolean expression to show or hide so combined cases. In order to hide the KIT and 3D interior and conditions LI of the Insert, the Boolean expression would be:

  not ("Kit" or (("Kit" et "3D") or ('Kit' and 'LI')))

  Simply hide only Kit will not hide a combined condition (e.g. Kit & 3D).

• AttributeChangeEvent not triggered when the position of the separator is changed by the user

  Hello
  
  I have a dispatcher Panel as below:
  
  < af:panelSplitter orientation = 'vertical' id = 'ps1z' collapsed = 'true '.
  positionedFromEnd = "true" splitterPosition = "240".
  styleClass = "AFStretchWidth AFStretchHeight"
  clientComponent Binding = "#{pageFlowScope.discrepancyView.panelSplitter}" = 'true' "
  attributeChangeListener = "#{pageFlowScope.discrepancyView.attributeChangeListener}" >
  
  This splitter makes fine between the two areas of my page. But the attribute change event does not seem to be pulled when splitter is collapsed/expanded and when the position of the separator is changed by moving the mouse. The earpiece of the attributeChangeListener method is never get called.
  
  Can someone tell me what could be the reason for this?
  
  Thank you
  -Vijay-

  Hello

  change attribute thse listeners only fire when a component is changed implicitly by the rendering engine kit. So it should not change when the user repositions the separator

  Frank

• Scheduler - not triggered when the task "run if the user loged on or not."

  I m, creating a task that is mapped to a file is to run,

  I have his work automatically and manually when the option (button) "run only when the user is logged on" is selected.

  but the automatic/manual RACE does not work when the option (radio button) "Run if user logged on or not" is selected.

  Please help us to solve the issue.

  "Run If the user of connect or not" only works if the task does not call a user interface.  I have found this workaround to How to run. BAT files invisibly - Ramesh Srinivasan and it works successfully "Run if user logged in or not ' in Task Scheduler batch files now.

• value change event not called on the evolution of the value falling down

  
  Hello

  I have a drop down with values such as... 1-25, 26-50 and so on.

  I need to see the 1-25 as pre-selected when the page is loaded. and when we change the value in the drop down a listner valuechange is called and will service call.

  But when I again selects the default 1-25, at the time where only the value changes listner is not called.

  To show the value that pre-selected I put:-noOfRecSOC.setValue(1);

  noOfRecSOC is the drop down on the screen.

  You must not directly set the value in the UI component. Use the property value drop-down list together for years by default here. Otherwise the value change listener do not notice the change to the original value (as it is never changed).

  You can use a variable temporary pagedef for the value. check out my blog Creating Variables and attribute Bindings to Store values temporarily in the PageDef | JDev & amp; ADF Goodies to find out how to do this.

  Timo