DRAC 5 installation media: "Selection of CD/DVD-ROM not valid."

I connect to a Drac 5 with firmware version 1.33 using 32 bit Firefox 2.0.0.20 as downloaded from Mozilla.org running on CentOS 5.2.

It seems to me installing the Console and media attach the plug-ins OK, but I get a problem when I try to join a DVD-ROM. I select the ISO from Centos 5.2 image, but when I press the Connect button I get a pop-up indicating that "the page at https://192.168.108.102 says: ' then 'selection of CD/DVD-ROM not valid.'.

If I try the same thing using IE 7 under Windows, it will connect, but since I don't have Windows in the data center is too slow and no use for me to try to connect a DVD over the WAN.

I searched Google and found nothing documenting this error so I am a bit stuck as to what it means and what to do about it.

I tried to run firefox as root also in case the plugin was trying to cordon the ISO file.

I also eliminated any firewall blocking the ports.

This problem is related to Internet Explorer 8.
The error can be resolved by adding the IP address as a trusted site in Internet Explorer 8.

Tags: Dell Servers

Similar Questions

  • Installation of 12 elements PShop DVD does not start, no autorun.exe

    New installation of Photoshop elements 12 DVD, will not start. It IS in a DVD player, and Win Explorer shows no Autorun.exe, as suggested in the troubleshooting information.  What should do?

    You can download a trial version and activate it with your serial number http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

  • CD/DVD-ROM not recognized since the installation of Vista, without errors

    Installed Vista and lost CD rom? CD works can be heard during the execution but system will not find CDROM? Deleted upper and filters low but still will not find CD ROM?

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Windows vista installation - itunes loss of cd/dvd-rom

    I installed the latest version of itunes yesterday and my computer does not recognize the cd/dvd ROM. I removed the itunes and everything is back to normal. I repeated the process with the same answer. I have windows vista with service PAC 2. Please guide me

    Hi Skoopytintin,

    I suggest to see the following Microsoft Knowledge Base article, then follow the steps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    I hope this helps.

  • CD-ROM/DVD-ROM not working-Code 39

    Inserted a disk and found that my CD-ROM/DVD-ROM is not working. For Device Manager and got this message:

    Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    The device is Optiarc DVD RW AD-7560 s

    With the help of Windows Vista, ACER Aspire 6930

    Tried to find solutions, but nothing happened... need suggestions on how to solve this problem.

    Thank you

    Hello

    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the total process
    which solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, and then make sure that the cables
    at both ends. Remove and replace, do not just tight. For laptops, you can clean it often
    power and contacts data with a pencil eraser.

    --------------------------------------------------------------

    Also check with your system manufacturer to see if there are any updated drivers for your DVD.
    Or even if there are the 'old', you can reinstall. Many use the default Windows drivers
    However, some will be more special. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • Reader of CD-ROM/DVD-Rom not detected/recognized

    Earlier today, my DVD drive was working fine. My laptop a HP Pavilion dv9000 shut down on its own. When I restarted, the computer doesn't recognize any DVD/CD, I tried to insert.

    I ran auto Microsoft fix this program, but after several times it would not work and could not fix the drive, because he could not detect it. I also tried to delete the upper and lower registry (which has worked for me before, when this problem happened), but no record was available for me to remove it. I tried to find the drive in Device Manager, but were unable to locate him.

    What can we do?

    Hello

    You can try a system restore.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    If it does not remember all the steps you've taken must be repeated and
    You must follow ALL the steps below in any case, if the restoration is not enough.

    ==========================================================

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log (ignore log checking for now).
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    --------------------------------------------------------------------------------------------------------

    After SFC and CheckDisk:

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • CD/dvd-rom not recognized Vista

    I uninstalled and do reinstall the driver for my dvd player. I see that I have the disc but it will not read anything. I can hear it trying but nothing appears. I can not burn on raw either. I need help and Mr. fix, that it does not download for some reason any.

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • DVD - ROM not reading DVD9 format video

    DVD - ROM in the Satellite L10-236 does not at all read DVD9 format video on DVD. Does anyone know if this format is available for these DVD-ROM (Matsu * a DVD-ROM + CD - R / RW) tweaks are required, or there is a break? Thank you.

    Hello

    Well, I m do not know what you mean by DVD9 but all the information on the supported DVD media and compatible you can find in the user manual. This document must be preinstalled on your device.

    Good bye

  • DVD - rom not open or work

    I have a dvd-writer/cd-writer combo that operates. Below, I have a dvd - rom that is not open or read. That's happened? Can it be fixed?

    The following links may be a place to start:

    (982116) your CD or DVD drive is missing
    or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116
    (Windows XP / Windows Vista / Windows 7)

    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Beyond that...

    If you are uncomfortable, maintaining your own system...
    You can open the suitcase and try to put in place caps
    for the reader, but it sounds like the hardware failure.

    Reach... Device Manager and see if the drive is marked.

    The following article might be worth a visit:

    The symbols, Error Codes Windows Device Manager
    and definitions in Windows 95, 98, Me and XP
    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00035740&cc=us&LC=en&DLC=en&product=3758068

    I suspect that the solution is to replace the drive.

    Good luck.

  • DVD - ROM not working not

    When I insert a DVD-ROM to install a program, AutoPlay appears and I will open with windows. When I try to click on the Setup program of the application or any icon nothing happens. Whenever I double-click on something, that nothing happens again. I am able to insert and eject the DVD. I tried to change Autoplay and when I go to my computer and click on the DVD and then try clicking on the installer, still nothing happens. I checked my update driver and Manager. I can burn CDs and DVDs and watch movies, but when I try to install a DVD-Rom, nothing works. How can I get my DVD-ROM to work properly, or what else I can check?

    Thanks for any help.

    I wanted to include these links if you need to search for a driver, if many don't use that Windows uses by default.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Rob - bicycle - Mark Twain said it is good.

  • CD/dvd-rom not detected by Windows

    I have the same problem as the previous people, except that I can't download Mr. Fixit.  I get an error message.  I've had friends get into my computer to find my DVD - ROM drive and they can't find it.  They have removed upper and lower filters and may not always know where the cd/dvd-rom drive disappeared.

    Anyone know how I can download or access Mr. fix it so I can start trying to solve the problem

    I get a microsoft error message that says this:

    We're sorry, but we met an unexpected problem and cannot complete this diagnostic solution.
    You can use the link below to create a shortcut to our solutions set and try again later.
    Place a shortcut on my desktop for Microsoft Automated Troubleshooting Services fix it solution
    An unexpeced error occurred and were unable to create the shortcut.

    As I said we did the manual way and that did not solve the problem

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the system manufacturer
    and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • CD/DVD-ROM NOT DETECTED

    I bought a laptop (HP 2000-2d28tu) 6 months back. Unfortunately since last sound CD/DVD-ROM does not appear in any of the installed OSs, Win 7, Win 8 and Ubuntu i.e. also not in the BIOS settings. Please suggest proper advice?

    I would say that this need to be replaced. It seems it would be under warranty if it's only 6 mos old. If this is not the case, the part is not too expensive and it's pretty easy to replace. After the return if you ned more of help.

  • Tecra S1: DVD ROM not recognized burner (Plextor PX-608AL)

    Hi all

    I bought a DVD ROM Writer (Plextor PX-608AL) that is not recognized by my Tecra S1 with XP Pro.

    I installed the latest BIOS v2.50 as well as the latest Windows patches.

    To the search, in the Setup of the BIOS (ESC during startup), the drive is not available.

    I tested the drive in my old non - Toshiba with Win2k laptop with no problems.

    Mounting frame is also OK (tested with the original Toshiba DVD ROM)

    Y at - there a trick to getting a 3rd disc part DVD working in a Tecra notebook?
    What is generally a problem

    Thanks for reading my ad and you answers or advice

    Klaus

    Hello

    It won't be very easy get your new work of drive on your S1, I will explain why:

    Most DVD players for laptops (including your Plextor 608AL) do not have jumpers to set
    their place according to the requirements of the laptop.
    Three settings are available: master/slave/CableSelect

    Most Toshiba laptops require the CD to react as a secondary master drive, unfortunately
    a disc factory settings in bulk comes as a disk Primary Master or CS.

    There are two options how to get to missing jumpers to make it work.
    (1) thanks to a new firmware patch that has this option defined by the software based on Toshiba standard or
    (2) by a bridge of material on some pins to the back of the drive.

    As you can see, both options will cancel the guarantee of the reader and are not easy for a techie/technician.

    As for option 1) on the search for a suitable firmware... no there are none available now. I checked the official site of Plextor, but also sites of patch firmware... NO CONCLUSION.
    According to another Forum, business Plextor responded to a request for a firmware adapted with this answer:

    start of quote:
    Dear Sir.

    The drive is detected beeing as a master drive.
    This setting cannot be changed. Are there no rider to do so.
    How mount you the device to your laptop, it's up to you.
    It of different for every laptop and either found in the manual of books or you can request that information from the manufacturers for your laptop.

    Kind regards
    end quote (source: http://club.cdfreaks.com/showthread.php?t=199145 )

    As in option 2), it requires some skills with soldering and I do not think that this forum is suitable for me to explain this procedure. You should google around to find the procedure "pin 47 ashore" on your own, taking all the risks of losing the warranty and/or the drive on your own.

    Concerning

    chain

  • Satellite Pro 2100: DVD - ROM not detected - need drivers

    Hello
    My DVD ROM disappeared also from 'my computer' and in the Device Manager.
    Where can I get a driver for the standard DVD ROM?
    Computer does not see the disk, how ' do it see the player "so that I can install the driver?

    All the words of wisdom?

    Hey riri,.

    Check in Device Manager to see if your DVD-ROM is listed and if so was it an exclamation mark against it? If it is, then simply remove it from your system and restart. Windows will identify as a new device and install with the correct driver.

    It is also possible that the drive may have 'disappeared' If you have recently removed any software DVD. It is a known issue and a solution is described in the following Microsoft Knowledge Base article: -.

    http://support.Microsoft.com/kb/320553/en-us

    Kind regards

  • DVD - ROM not showing is not on compmuter

    Hello, my dvd - rom does not show not on computer... when I go into Device Manager, I see TSSTcorp dvd - rom ts-h353b with exclammation mark yellow... help

    Hello

    Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that helps the issue.

    http://support.Microsoft.com/kb/982116

    Kind regards

    DP - K

Maybe you are looking for

  • How to pass 10 IOS apps?

    We used to keep apps until they move. How can we do this in 10 IOS?

  • NB550D - after standby extended/suspension/reboot the screen is black

    The Netbook appears on, but not the monitor. I press 5 seconds the button we / off, the Netbook switches OFF and then I press 1 second the button on / off and the Netbook is turned on with the monitor. Whenever I need a start up cold to start the Net

  • iPhone complete storage

    iPhone 5 s. My phone displays the error message "storage is almost complete." Tap Settings > General > storage & watch 8.9 GB under Photos & camera use iCloud. However, typing 'Camera' app says "No. Photos or videos" in memory. What gives?

  • SD-C2612-CD drive may not be recognized

    Windows cannot start this hardware device (CD-ROM-SD-C2612) because his information in configuration (in the registry) is incomplete or damaged. (Code 19) The problems cannot solve out.

  • P1505n printer

    Can I install my LaserJet P1505n printer on a new computer without the original CD?