"Drag and Drop" tab 2 A10-70

Similar Questions

• 3.6.3, cannot drag and drop tabs (the iconic chart moves but disappears when released), also can not 'tab.

  3.6.3, I can not drag and drop tabs (the iconic chart moves but disappears when released), also I can not "select" tab to change the status of parent/child etc.

  This has happened

  Each time Firefox opened

  == installation

  Hello

  I had the same problem (impossible to drag-and - drop) and it was restored when I disabled the addon "tab mix more.

• Cannot re-arrange/drag-and-drop tabs after update 38.0.5

  At some point, probably in the updated to 38.0.5 (on Win8.1 64-bit), but perhaps earlier and drag stopped working for my tabs. I can't go out a tab to a new window, and I can't drag tabs round in a window to the re - order. I tried to disable hardware acceleration and put in safe mode, without result.

  OK, well, I forgot the cardinal rule of technical support, "have you tried turning your computer market again? Quit and restart Firefox had no effect, but restarting the computer solved. No idea why, but I won't argue with success.

• Drag and drop, 1 share of different sur-succes drag Source, 4 Drop target, for each. Is this possible?

  Hello.

  I created an infographic of type board game and wants that the participant to be able to enter the game room, then drop it into different spaces on the Board, each holding to another slide. I need interaction drag - déposer so that they can pick up and drop the piece. Now, what I need is for each target to have a different action, but even if I add each one to a different group, if I change an action for one, that it applies the change to all drop targets.

  Is there a way to get around this?

  In addition, once / if possible, I would like to add a "back button" on each of these slides and would need when the participant returns to the boardgame slide, they can move the piece to a different drop target to read the following description. I think that the best way to do this would be to make all the "wrong" answers, while the game piece is not stuck once they have fell on a drop target "correct." Please correct me if I'm wrong.

  If I understand you correctly, I think that I thought about it.

  1. Create your Drag and Drop, as you would normally
  2. In the Panel of Drag and Drop, select the Options tab
  3. Click on the button set the correct answers
  4. The value of each drop target to have the source of displacement of the source (you must choose the sequence in the Type drop-down list)
  5. Create the slides that you want to display for each drop target
  6. Select one of the drop targets
  7. Go to the Format of the Panel Drag and Drop tab
  8. The Actions of the object... a button click
  9. In the action column, select go to slide, and then select the appropriate slide
  10. Repeat steps 6 through 9 for each target deposit
  11. Overview of the project

  I did a quick test and it seemed to work according to the settings you said earlier.

• Drag and Drop - response schema complex

  Hi guys out there.

  I've set up interaction drag-and - drop, who's looking good, but I can't Captivate to recognize the answers correctly. Please could you help?

  I have three sets of slide sources one (2), B | (7 sources) and C (7 Sources).

  I have two boxes X and Y.

  I want has to be deleted only in X

  I would like to B to be deleted only in Y.

  I want that C had to be abandoned in X or Y - or the other is a good answer.

  For some reason, Captivate is never correctly mark the answers. I suspect it is the sources of drag 'C' the origin of the problem, but I'm not sure.

  Can you advise how I should set up correctly?

  Here is a link to the output: http://blendedlanguagelearning.com/portfolio/Test/10Sept2014/TestOnly.htm

  I can provide the source files if needed, but they are great.

  Thank you very much!

  
  Seth

  Well, I think I have a solution feasible for you, if it'll take a bit of tedious configuration. I'll assume that you are familiar with the Types of Interaction, or watch this video (http://youtu.be/B_wVtH1Vsck?list=UULpsk3UF7lh5l9fVkLIqu6g) because they are essential to keep this manageable configuration.

  In short, you put each set of sources in his own Type of Interaction and then create a combination of answers separate for each of the 8 possible indictments of category C.

  If there is a more simple or more elegant solution, I can't think about it right now. Maybe someone else can, but this will produce the functionality you're looking for, I think.

  (1) name your drop targets in the property inspector. I used Drop_X and Drop_Y in the screenshot below.

  (2) select your category 'A' Sources of drag. On the Drag and Drop tab, click on the button + to create a new type of interaction. Name the type of something easy to distinguish (I used "InteractionType_A).

  

  (3) repeat step 2 for your category 'B' and 'C' Sources of drag, so each has it's own unique Interaction of its kind.

  (4) Begin defining the right answers. I began by assigning A-> X, B-> Y and C-> X. You can see on the left side of the screenshot below.

  (5) now the difficult part. Click on the button «Set Correct answers...» ». You should see a "Answer1" just like mine in the screenshot below, but with two target Drop names and names of all Type of Interaction you have used instead.

  6) click on the 'Add a new reply' button at the bottom of the window. You should now see a Virgin "answer2" below your "Answer1".

  7A) make your "answer2" look just like mine. The first two lines will always be the same, (target Drop = X, drag Source = A, Count = 2) and (target Drop = Y, drag Source = B, Count = 7). Unfortunately there is no copy and paste or duplicate function here so you'll have to implement from scratch every time. You also need to click on the + to add the fourth line.

  7 (b) the only thing that will change for each new answer you add will be the 'Count' on lines 3 and 4. Start with (Count = 6), and (Count = 1) and adjust the number by 1 for each new answer, making sure they always add up to 7. (5, 3 4, 3 4, 2 5, 6 1, 2and 0 7).  When you are finished, you should have 8 combinations of single response and a strong desire to never touch another drag and drop interaction.

  

  I hope that all makes sense. Good luck!

• ALT + tab no longer works with drag-and-drop

  I bought a new computer Samsung with Windows 8, two weeks ago. On my old computer, I could choose a file in a folder, then alt - tab to another folder and then drop the selected file. Now, every time I select a file and use alt - tab, the file automatically becomes deselected.

  This never happened to me in my previous versions of Windows.

  To be clear: my keyboard and touch pad working perfectly fine. It is a problem of Windows when you use drag-and - drop jointly with alt - tab.

  Hello Boston,

  This feature is also available in Windows 8. You must select a copy of the file and click alt + tab and select the folder where the file should be moved or pasted.

  If this does not work on your computer, you can try to follow the link below and create a new user account and see if that helps. To create a user account follow this link:

  Create the user account

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• How to drag and drop nodes to tab between the components of the tab

  I'm working on this tutorial example ( feature drag - move in the JavaFX Applications |) JavaFX tutorials and Documentation 2 ). Based on the tutorial I want to drag tabs between two tabs. So far, I have managed to create this code, but I need help to complete the code.

  Source

  tabPane = new TabPane();
  Tab tabA = new Tab();
     Label tabALabel = new Label("Main Component");
  
  
  tabPane.setOnDragDetected(new EventHandler<MouseEvent>()
          {
              @Override
              public void handle(MouseEvent event)
              {
                  /* drag was detected, start drag-and-drop gesture*/
                  System.out.println("onDragDetected");
  
                  /* allow any transfer mode */
                  Dragboard db = tabPane.startDragAndDrop(TransferMode.ANY);
  
                  /* put a string on dragboard */
                  ClipboardContent content = new ClipboardContent();
                  content.put(DataFormat.PLAIN_TEXT, tabPane);
                  db.setContent(content);
  
                  event.consume();
              }
          });
  

  What is the correct way to insert the contents of the tab as an object? In the tutorial simple text is transferred. How do I change this line content.put(DataFormat.PLAIN_TEXT, tabPane); ?

  And what is the right way to insert the tab after that I drag the tab:

  Destination

  
  

  tabPane.setOnDragDropped(new EventHandler<DragEvent>()
          {
              @Override
              public void handle(DragEvent event)
              {
                  /* data dropped */
                  /* if there is a string data on dragboard, read it and use it */
                  Dragboard db = event.getDragboard();
                  boolean success = false;
                  if (db.hasString())
                  {
                      //tabPane.setText(db.getString());
                      Tab tabC = new Tab();
                      tabPane.getTabs().add(tabC);
                      success = true;
                  }
                  /* let the source know whether the string was successfully
                   * transferred and used */
                  event.setDropCompleted(success);
  
                  event.consume();
              }
          });
  

  
  

  
  I guess that this transfer is possible?

  REF javafx 2 - How to drag and drop nodes between the components of the tab - stack overflow tab

  I use a graphic (instead of text) for tabs and call setOnDragDetected on this chart. That way you know which tab is moved. There is no nice way to put the tab itself in the dragboard because it is not serializable (see https://javafx-jira.kenai.com/browse/RT-29082), so you'll want to probably just store currently slipped into a property tab.

  Here's a quick example; It only add the tab at the end of the existing tabs in the pane has fallen. If you want to insert it in the location that is closest to the actual drop you probably browse the tabs and find details of chart of each tab, or something.

  import java.util.Random;
  
  import javafx.application.Application;
  import javafx.beans.property.ObjectProperty;
  import javafx.beans.property.SimpleObjectProperty;
  import javafx.event.EventHandler;
  import javafx.scene.Scene;
  import javafx.scene.control.Label;
  import javafx.scene.control.Tab;
  import javafx.scene.control.TabPane;
  import javafx.scene.input.ClipboardContent;
  import javafx.scene.input.DragEvent;
  import javafx.scene.input.Dragboard;
  import javafx.scene.input.MouseEvent;
  import javafx.scene.input.TransferMode;
  import javafx.scene.layout.StackPane;
  import javafx.scene.layout.VBox;
  import javafx.stage.Stage;
  
  public class DraggingTabPane extends Application {
  
    private static final String TAB_DRAG_KEY = "tab" ;
    private ObjectProperty draggingTab ;
  
  @Override
    public void start(Stage primaryStage) {
    draggingTab = new SimpleObjectProperty<>();
    TabPane tabPane1 = createTabPane();
    TabPane tabPane2 = createTabPane();
    VBox root = new VBox(10);
    root.getChildren().addAll(tabPane1, tabPane2);
  
    final Random rng = new Random();
    for (int i=1; i<=8; i++) {
      final Tab tab = createTab("Tab "+i);
      final StackPane pane = new StackPane();
        int red = rng.nextInt(256);
        int green = rng.nextInt(256);
        int blue = rng.nextInt(256);
      String style = String.format("-fx-background-color: rgb(%d, %d, %d);", red, green, blue);
      pane.setStyle(style);
      final Label label = new Label("This is tab "+i);
      label.setStyle(String.format("-fx-text-fill: rgb(%d, %d, %d);", 256-red, 256-green, 256-blue));
      pane.getChildren().add(label);
      pane.setMinWidth(600);
      pane.setMinHeight(250);
      tab.setContent(pane);
      if (i<=4) {
        tabPane1.getTabs().add(tab);
      } else {
        tabPane2.getTabs().add(tab);
      }
    }
  
    primaryStage.setScene(new Scene(root, 600, 600));
    primaryStage.show();
    }
  
    public static void main(String[] args) {
    launch(args);
    }
  
    private TabPane createTabPane() {
      final TabPane tabPane = new TabPane();
      tabPane.setOnDragOver(new EventHandler() {
        @Override
        public void handle(DragEvent event) {
          final Dragboard dragboard = event.getDragboard();
          if (dragboard.hasString()
              && TAB_DRAG_KEY.equals(dragboard.getString())
              && draggingTab.get() != null
              && draggingTab.get().getTabPane() != tabPane) {
            event.acceptTransferModes(TransferMode.MOVE);
            event.consume();
          }
        }
      });
      tabPane.setOnDragDropped(new EventHandler() {
        @Override
        public void handle(DragEvent event) {
          final Dragboard dragboard = event.getDragboard();
          if (dragboard.hasString()
              && TAB_DRAG_KEY.equals(dragboard.getString())
              && draggingTab.get() != null
              && draggingTab.get().getTabPane() != tabPane) {
            final Tab tab = draggingTab.get();
            tab.getTabPane().getTabs().remove(tab);
            tabPane.getTabs().add(tab);
            event.setDropCompleted(true);
            draggingTab.set(null);
            event.consume();
          }
        }
      });
      return tabPane ;
    }
  
    private Tab createTab(String text) {
      final Tab tab = new Tab();
      final Label label = new Label(text);
      tab.setGraphic(label);
      label.setOnDragDetected(new EventHandler() {
        @Override
        public void handle(MouseEvent event) {
          Dragboard dragboard = label.startDragAndDrop(TransferMode.MOVE);
          ClipboardContent clipboardContent = new ClipboardContent();
          clipboardContent.putString(TAB_DRAG_KEY);
          dragboard.setContent(clipboardContent);
          draggingTab.set(tab);
          event.consume();
        }
      });
      return tab ;
    }
  }
  

• How drag and drop a picture into a shape of the object?

  On my old Lion system that I used to be able to drag a picture from iphoto in the shape of the object open in Pages.  I can't be able to do more.  The system changed?  I tried to use Inspector (under help), but it won't let me access the file of the photo on the right.

  You can drag and drop a picture in a form in v4.3 Pages ' 09, but this can be done in any version of v5 Pages. Quite different applications, as well as more recent Pages has lost about 100 features that were in its antecedent.

  Check if you have Pages ' 09 v4.3 in your Applications: iWork ' 09 file. If so, use it.

  Pages v5 requires that you select a shape, and then on the Image tab in the right panel, you choose Image, scale to fill fill, and then select your image for the background. You cannot select this image from the inside, but you can add text to the form that will appear on your image.

• Why is it I can't drag and drop to reorganize bookmarks?

  Drag and drop does not work to rearrange bookmarks in the toolbar bookmarks, window "Show all bookmarks", or in the bookmarks menu. I can 'Cut' and 'Paste' to rearrange things and works in all three, but it's the only way.

  I am running Windows 8.1 x 64 and Firefox 31.0

  Had a similar problem (could not drag the tabs or bookmarks, to reorganize their) with FF 32.0.3. Tried rebooting with the disabled modules, but it still doesn't work. Then tried deactivation and reactivation of hardware acceleration, and it began to work without restart. After the restart with active modules, it continued to work. Weird.

• 'Most visited' disappeared from the My Places bar. I tried all the suggestions about re: config, drag-and - drop, etc. Nothing works. Thoughts?

  The 'most visited' tabs and an RSS feed I use have disappeared from my places bar. They now sit under 'Favorites' and are very annoying.

  I followed all of the suggestions of Mozilla and other sources about the topic: config. Nothing works. I tried to drag and drop 'most visited' return to the places bar, but this does not work, either.

  Can someone please give me a solution?

  Thank you very much.

  patalarga

  You can drag the "bookmarks toolbar items" in the toolbar bookmarks to the Navigation bar if you want to bookmark is displayed on the toolbar.

  • https://support.Mozilla.org/KB/how+to+customize+the+toolbar

• Drag and drop no longer works in FF

  All drag-and-drop features stopped working on my 21 FF.

  In other words, I can not:
  -Drag items from bookmarks or rearrange bookmarks
  -Words slip from the search box or links to the URL box
  -Change the order of tabs
  -Rearrange items on toolbars
  -Move the text in text boxes
  -etc.

  Safe mode has the same problems.

  Please notify.

  ARGH. He was not at all a problem of Firefox: http://it.thelibrarie.com/weblog/2010.../drag-and-drop-stops-working/. Windows lol!

• All drag and drop functionality stopped working in Firefox 16 / Firefox 16.0.2

  Note that when it stopped working exactly but all drag and drop functionality work more... images, URLS, tabs... you name it. I was on 16 FF and upgraded to 16.0.2 without help. SafeMode... same behavior. Disable each add-on single and plugin... same thing again. using the default theme.

  What's left to try?

  I am running Windows XP SP3.

  A complete remission to zero of the system got things working again for me. Not ideal, but I'll take it for now.

• Windows XP SP3: Unable to start, System Restore cannot drag and drop ALL the files/folders on the desktop and applications, many unable to start, services cannot search, cannot copy or transfer the any files folders...

  After a recent power outage, my system has restarted with a weird and very common Windows problems range. The system boots fine, all my personal files/folders/apps are intact, have suddenly stopped almost all functions of applications, but many crucial functions of the Windows kernel. Everything seems to point to several Windows Services are unable to start (administrative tools on the start menu). I am running Win XP SP3 and that he was going to upgrade to Windows 7, but I wanted to backup everything in advance. As I have 29 000 hours on my C: drive and a lot of time invested in my system, files, and applications, I am extremely reluctant to risk losing my files and applications by performing any type of reinstalling Windows. Strangely, begin to almost all my apps and all my files are accessible for the most part, but I've lost the ability to drag and drop files, folders or items in a list within the applications COMPLETELY. I can't copy or paste anything, can't move the desktop icons (although I can create new files and folders). So at the moment I can't save anything or even a single file transfer to a hard drive on another storage medium. Immediate reaction: try safe mode and try the system restore safe mode has the same problems (likely due to the large number of system services that inexplicably refuses to start) and the system restore says an error window saying "system restore is not able to protect your computer at this time. try restoring the system running and restart again", which of course NEVER changes. It's the equivalent of getting a tire on your car in the middle of nowhere to find the spare tire flat and the missing Jack. I have used to be fanatical about the definition of the regular restore points, but now can not access them. I have backups of most of my personal files, but over years have lost most of the original installation CD for many of my applications (there are over 100 applications on my system) and I don't want to lose the file associations and architecture of directory tree that it took my so long to implement. I started with Win XP media center edition of first (circa 2004 or almost) and have migrated twice more of 3 hard disks and 2 computers. All this time (5 years of daily use), I have NEVER known so many malfunctions for as many Windows basic and vital functions at the same time. I tried a lot of 3rd party "windows fix - it / registry repair" apps, all have no effect. Everything I can speculate is there was some serious damage to the registry and have no idea how/why so many Services refuse to start. In MMC, more than half of the services actually start and run, the rest all give the error message "the service or dependencies is not start (error 1068).» In addition, very oddly, no. APPS or windows appear in the toolbar AT ALL, but the Quick Launch toolbar works very well, just like the tray button and start tasks (?! )!). If I reduce a window, it "disappears" (Nothing on the task bar), but I can restore it using the alt - tab keyboard shortcut to switch apps, so all applications/windows appear on the list of the Task Manager. A few apps is paralyzed bad, as the player windows media, itunes, etc. (I guess because the service windows audio can not not start), some won't start at all, but 90% of them work fine, except to try to copy or back up all files. I can create new files, however. I'm desperate to find a solution to repair XP3 Win WITHOUT losing my installed applications and files, before I try and switch to WIndows 7. Any help/suggestions/links/advice would be much appreciated. I'm an experienced user, but I've never met so many malfunctions based on the OS at a time. I, however, very painfully learned (years before that my system so complex) it's been almost a re-installation of Windows guarantees to lose my installed apps and files, the directory tree architecture associations.

  Help, please!

  I'll be honest with you - your message is so difficult to read that I don't bother to go through all that. Next time consider using white space, ball or points numbered, etc. to make your message more readable. I stopped reading after your first sentence and only scanned the rest quickly. I do not mean to hurt your feelings; just trying to help you get targeted answers you need for the future.

  The blackout has corrupted your Windows installation. Back up your data now. Since you have problems so much, it would be probably best is to remove the hard drive, put it in a USB drive enclosure and attach it to another computer to copy the data OR start the target with Linux Livecd such as Knoppix system and copy the data to an external hard drive. IOW, do not use the damaged windows to try to get your data.

  You can try a repair that will leave your programs and facility data intact, but with this widespread bribery, it is unlikely to work. However, it takes only a few minutes and is so worth a try. If the repair facility does not work there is nothing to do, but a clean install. And Yes, it will mean that over again.

  Consider buying a UPS to help prevent future damage by power outages. For a single computer, you should look for one in the area of $60 to 80. A more expensive UPS is not necessary. Another good disaster recovery strategy is to buy an external hard drive and Acronis True Image. You can image your system (and can make an incremental backup image so that your image is still current). You can apply your image and be back running that you were in relatively few minutes after a hard drive or Windows to fail.

  http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!

• Drag and Drop of printing in Windows 7

  1. drag and drop printing (i.e. parts dragging end droppping a file of the file on the printer icon Explorer) doesn't seem to work in Windows 7.

  2. maybe for the same reason, adding a shortcut to the printer in the SendTo folder (to add an item to send it to the printer in the right-click send to Menu) doesn't seem to work in Windows 7

  Is there a workaround for these 2 things?

  Hi Nalgupeba,
   
  Please note that this problem can occur if the printer drivers are not correctly installed on your computer.
   
  I recommend you to update the printer drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the assword or provide confirmation.
  2. in Device Manager, locate the device, and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.
   
  Try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Developer SQL 4.1.2.20 Build HAND-20, 64: cannot drag-and - drop in editor files include "#" in the name or the path

  Developer SQL 4.1.2.20 Build HAND-20, 64: I am not able to drag-and - drop a file from Windows Explorer into the SQL Developer Editor window if the name of the file or the path includes sharp «#» Unfortunately, my main directory structure contains a ' # ' in one parent folder names and I use drag-and - drop all the time... it is, I used to. :-)

  I am running Windows 7 Enterprise 64-bit with Service Pack 1

  It wasn't a problem in the previous version of SQL Developer 4.1.1.19 build HAND - 19.59.

  Thanks to study deeply and providing a repeatable test. It is a very strange edge cases.  Particularly interesting is...

  This same issue exists for JDeveloper Studio Edition Version 12.2.1.0.0

  After my tests in SQL Developer 4.1.2 the question seems to be, that say you, trying to open any file (I tried sql, xml, and pkb types) by drag-and - drop from Explorer Windows to a publisher of target opened on a XML file with a symbol of hash somewhere in the specification of the file it is.

  First of all, as a solution, I thought that I could recommend that you drag-and - drop since our view > files browser rather than Windows Explorer.  Which avoids the question and even you will descend on the Start Page tab, any worksheet or another editor must be opened before hand. However, there is a completely different problem with that: try to close the last tab of the XML Editor open blocking the entirety of the product.

  As you do not declare it against a release of the Early Adopter, where our team connect the bug, the standard procedure is so that you can open a service request with the support of the Oracle. My research did not turn any latest bug as this connected against SQL Developer or JDeveloper.

  Edit: In fact, just double click instead of using drag-and - drop from view > files avoids questions, name incorrect both hang at the end.