Drag point MCLB and update a particular cell of an another MCLB

Similar Questions

• Just updated to Sierra and updated Pages at the same time. Now when I try to select a line of text I find myself with an insertion point where I stopped by selecting

  Today, I updated for Sierra and updated to the latest version of the Pages. Now I find that I am more able to select a line of text. When I try to do, I find myself with an insertion point where I stopped by selecting, but nothing is selected. This is a bug in the new version of pages or get my wrong settings?

  You use a Wacom tablet by chance?

  Solution: Press the shift key, just before stop selection. And Yes, that sounds like trouble in the Sierra.

• Phone cannot download and update applications using data or connect via wifi

  A few days ago, I noticed that whenever I have download applications, it is not download immediately and takes maybe a whole for download day actually. I thought it was because I have too many photos/apps on my phone, so I deleted about 10 g of memory, and it still doesn't work.

  I also tried updating my long list of applications that have not been updated, but also does not work (it is set to automatic update)

  I have just updated my software to 9.3.1 but could not do so through my phone directly because it could not verify the updates. I've updated through my iTunes successfully but noticed even after I can't download/update all apps, and when I go into settings and verify software updates, I get an error message that says it can't check the updates.

  Now I can't even connect to my wifi, but my laptop has no problem to do. I have reset the settings network, factory settings and all the people at the Apple Support suggested but nothing works.

  I read somewhere to match iTunes of new conditions and have also made with nothing doesn't.

  Someone at - it other solutions I could try?

  Please do the following and after each test to see if the problem is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Please see recommended settings of WiFi routers and Apple access points
  4. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  5. Settings - WiFi - < network name > - Click on forget network - do a restart forced 4 and then again add the network
  6. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  7. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  8. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  9. Backup the device to iTunes - restore as NEW (no backup) using iTunes - see if solves problem - if yes - restore backup
  10. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Different versions and updates of Microsoft Visual C++, can I all?

  Hello. I use Windows Vista Home Premium, 32-bit with Service Pack 2. I have two different versions of the C++ installed and updates. I was wondering if it is okay to remove one of these items? They appear in the list programs and features on the control panel:

  Microsoft Visual C++ 2005 Redistributable (installed on 22/06/2007 558 kb)

  Microsoft Visual C++ 2005 ATL Update kb973923 - x 86 8.0.50727.4053 (29/07/2009 251 KB)

  Microsoft Visual C++ 2008 Redistributable - x 86 9.0.21022.218 (2010-03-04 594 KB)

  Microsoft Visual C++ 2008 Redistributable - x 86 9.0.30729.17 (2010-11-13 231 KB)

  Microsoft Visual C++ 2008 ATL Update kb973924 - x 86 9.0.30729.4148 (13/11/2010 199KO)

  The last two points have been installed with another program (BitDefender Internet Security 2011) automatically. All comments are appreciated. Thank you.

  Do not remove them! By replacing the "DLL he 'll" (the forums without space sensors) (new version 'old' substitution, that break older software) MS creates the WinSxS folder, and now several DLL versions can be stored side by side (SxS). Now, the application uses the version it was built!

  Thus, NEVER uninstall a Runtime VC ++!

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Backup and restore does not work, it always tells me to choose another point restor and try again.

  Each restore point I try he always tells me to choose another point of restor and try again.

  . Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  I hope this helps.  Good luck.

• Cannot install and update the apps store of windows 8

  Cannot install and update the apps store of windows 8. When I click the button install is not install only loadin. Plese help me.

  After trying all suggestions from several sites, I found that the problem is that the Firewall window must be running in order for the applications to install.   If you are running Windows 8 Pro, go to the desktop and click on "My computer" and double click on 'manage '.  In the window on the left side computer management, expand "Services and Applications".   Click on 'Services', in the Center window, scroll down to "Windows Firewall" right click on "Windows Firewall" and click "Properties".  If the Startup Type is "disabled", click to drop down and select "Automatic".  At this point, you can click on 'Start' under the service status.  Once the Windows Firewall is started, you should be able to start installing and or update your apps from the app store.

• Upgrades and updates installed as new

  I'm a little irritated...  It seems that whenever Adobe has one of these minor point reviews and downloads via creative Cloud update, it is always a new installation.  In a new folder and any of my plugins or addon scripts reporter on the new version, so I have to reconfigure every time.  It is a huge PITA bread. Could solve the problem so that it asks if we want to as a new installation or update anything that is already there.  I'm tired of having to reconfigure my plugins and scripts of third 3rd.

  Creative cloud offering more choice for Installations. Adobe Customer Care Team

• CS6 design and update Web Premium question

  Hello - I had to reinstall the rest of the CD, and I have problems with the update. Adobe Update Manager does not work and when I click on updates of the PS, for example, I found a message that says I need to install creative cloud. I did and my installed version is not recognized as I am presented with options for stuff on subscription only, which I have interest no one in fact.  Is the Manager of obsolete original update now and if so, how can I manually update my CS installation to the latest version please?

  Thank you

  Lyle

  My problem is solved... Soft, but good enough.

  I restored from a backup.  I'm always invited by Adobe Application Manager for an update required , which I finished.  This time however, I didn't sign with my code to identify Adobe as mentioned in the initial report, this is the point where the update starts looking for facilities creative cloud rather than my Creative Suite applications.

  I am able to update my applications now using the update option in the application itself. Adobe Application Manager continues to insist on finding creative cloud.

  Lyle

• Web App point record and present functions is possible?

  I created a web application I want the user to be able to record without trigger a workflow, then go back and change the content and save again if necessary, then when all is complete submit so that it launches a workflow and web app submitted can be verified.

  This should be used for a course so that assignments can be submitted online.

  Thanks for your help

  Eamon

  To do this, is to use a form in line/update - details - form to collect and record data, they can continue to come back and update the form, you need SAR = false on the form action, if you want to stop the answering machine, and you can easily define the workflow against zero on the form itself with in the admin. The thing to note is that you must use system fields or extended CRM fields in the online form that you can not use form fields custom Web in a form of updating details. Also note that the person needs to be registered to do it all.

  the next thing is to send them to the form of submission Web App (which should be a mirror of your previous form fields) preloads all fields with their customer data and data CRM extended, configure the fields to read only so they can not make changes, do as "final review" page, then all they need to do is to hit the submit button.

  Hope this helps - Billy. P.S. Let me know if you need clarification or expansion on any of the points

• Thinapped Quickbooks Pro 2014 and updates

  I have successfully thinapped quickbooks pro 2014 and has been using msi managed console view thinapps Horizon (Thinapps V5, see Version 5.2, windows 7) everything works fine until I have try connect than QuickBooks update R4 and R5. If I try to run the update from quickbooks seems to download and update some of the areas, but you will need to close QB and restart. At this point, it tells you there a wait of up to date and gives you the opportunity to install it. If I click on install it starts the process and quickly fails with an error 1601. If I download the patch manually file and run that I see the QuickBooks webinstaller decompress several files, then try to update it fails then saying there is no installed quickbooks.

  I am returned to the machine master install, recreated QB thinapp package, that manually installed on the test computer, two updates still stranded. I then tried two methods of update (automatic and manual) on the master machine to the point just after the capture of the post office, and in both cases, it worked.

  Someone else has managed to update the QB 2014 while thinapped and if so, how would you please?

  Thank you

  If the ThinApp automatically downloads the patches, it may not successfully install the Windows Installer cannot access the bubble of the virtual service.

  If the application has no option to disable the updates, the only option is to repackage the application again once by installing all the necessary updates. But again, you can find yourself in the same situation if it downloads a new update.

• Importing a flat at Oracle and update another table

  Hey everybody,

  I am a newbie with Oracle, and I tried for 2 days to fix this below. But all my research and all attempts have failed.

  I have a text file called ReturnedFile.txt. This is a comma separated text file that contains the records of two fields... Envelope and Date returned.

  At the same time, I have a table in Oracle called manifest. This table contains the following fields:

  Envelope

  DateSentOut
  DateReturned

  I need to write something that matter the ReturnedFile.txt in a temporary Oracle table named UploadTemp and compares the data in the field of the envelope of UploadTemp with the domain of the envelope in the manifest. If it is a match, then the field of clear needs updated with field DateReturned in UploadTemp DateReturned.

  I did it with SQL Server without problem, but I tried for two days to make it work with Oracle and I can't understand it. I tried to use SQL * Loader, but I can not even run properly on my machine.

  I create a file of control, registered as RetFile.ctl. Here is the content of the CTL file:

  DOWNLOAD THE DATA
  INFILE 'C:\OracleTest\ReturnedFile.txt '.

  ADD
  IN THE UploadTemp TABLE
  "FIELDS TERMINATED BY '"
  (
  ENVELOPE,
  DATERETURNED
  )

  If I could get SQL * Loader works, here's the code I came with to import the text file, then compare it to the clear table and update if necessary:

  sqlldr UserJoe/Password123 CONTROL=C:\OracleTest\RetFile.ctl LOG = RetFile.log BAD = RetFile.bad

  update the manifest m set m.DateReturned =
  (select t.DateReturned
  of UploadTemp t
  where m.Envelope = t.Envelope
  *)

  That's all I had. As I said, I can't find a way to test it and I have no idea if it's still close.

  Please... can anyone help me? Even close, I'm on this thing?

  Joe

  If your ReturnedFile.txtfile is a comma, you must FINISH BY ',' not COMPLETED BY "'" in your control file.  If it happens to not be a comma ending on a line, then you must also add TRAILING NULLCOLS in your control file.  You must also use a date format for your date in your control file that corresponds to the date format in your file ReturnedFile.txt, where it does not match the format of the date on your system.  You must add a WHERE EXISTS clause in your update statement to prevent any lines that do not have the updated DateReturned with a null value.  Please see the example below.  If it doesn't then please do a copy and paste as I did, that includes a few lines of sample data and table structure.  It would also be useful to see your SQL * Loader or logs SQL * Loader error message.  If you can not get SQL * Loader is running properly, then you may have other issues, such as the permissions of files at the operating system level.  Also, there are options other than the methods below.  For example, you can use an external table, instead of SQL * Loader, if your ReturnedFile.txtfile is on your Serer, not your client.  You can also use the merger instead of update.

  Scott@orcl_11gR2 > type host returnedfile.txt

  enV2, 07/03/2013

  ENV3, 07/04/2013

  ENV4, 07/05/2013

  Scott@orcl_11gR2 > type host retfile.ctl

  DOWNLOAD THE DATA

  INFILE 'ReturnedFile.txt '.

  ADD

  IN THE UploadTemp TABLE

  FIELDS TERMINATED BY ', '.

  trailing nullcols

  (ENVELOPE

  DATERETURNED date "yyyy-mm-dd")

  Scott@orcl_11gR2 > create table uploadtemp

  2 (envelope varchar2 (15),)

  date of datereturned 3)

  4.

  Table created.

  Scott@orcl_11gR2 > create clear table

  2 (envelope varchar2 (15),)

  3 date of DateSentOut,

  4 date of DateReturned)

  5.

  Table created.

  Scott@orcl_11gR2 > insert all

  2 in manifests values ("env1", sysdate-7, sysdate-3)

  3 in obvious values ("env2", sysdate-6, null)

  4 in the obvious values ('env3' sysdate-5, null)

  5 Select * of the double

  6.

  3 lines were created.

  Scott@orcl_11gR2 > select * from manifest

  2.

  ENVELOPE DATESENTO DATERETUR

  --------------- --------- ---------

  ENV1 June 28, 13 2 July 13

  enV2 29 June 13

  ENV3 30 June 13

  3 selected lines.

  Scott@orcl_11gR2 > host sqlldr scott/tiger CONTROL = RetFile.ctl LOG = RetFile.log BAD = RetFile.bad

  SQL * Loader: release 11.2.0.1.0 - Production on Fri Jul 5 13:15:06 2013

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  Commit the point reached - the number of logical records 3

  Scott@orcl_11gR2 > select * from uploadtemp

  2.

  ENVELOPE DATERETUR

  --------------- ---------

  enV2 3 July 13

  ENV3 4 July 13

  ENV4 July 5, 13

  3 selected lines.

  Scott@orcl_11gR2 > clear day m

  2. set m.DateReturned =

  3 (select t.DateReturned

  4 t UploadTemp

  5 where m.Envelope = t.Envelope)

  6 where there is

  7 (select t.DateReturned

  UploadTemp 8 t

  9 where m.Envelope = t.Envelope)

  10.

  2 lines to date.

  Scott@orcl_11gR2 > select * from manifest

  2.

  ENVELOPE DATESENTO DATERETUR

  --------------- --------- ---------

  ENV1 June 28, 13 2 July 13

  enV2 June 29, 13 3 July 13

  ENV3 June 30, 13 4 July 13

  3 selected lines.

• INSERT and UPDATE audit generating more lines expected in $ AUD

  Environment:
  
  Oracle 11.2.0.3 EE on Solaris
  
  I had a request for verification of the INSERT and UPDATE on the activities of all the tables in a particular schema. It was in anticipation of a request that will live and the owner wanted to see a 'typical' of some test users activity.
  
  Here are the steps I took:

  alter system set audit_trail=DB_EXTENDED scope=spfile;
  
  Bounce the instance
  
  audit INSERT table, UPDATE table by USERX;

  I also "audit_sys_operations = TRUE' so I know I'll take some SYS audit data in $ AUD as well, but I can ask around those."
  
  My question is that I see several connections from the application server with "LOGIN" and "LOGOUT" actions and I don't know why they are appearing in the table of AUD $.
  
  Is it because I have auditing enabled for inserts and updates on all THE tables for USERX and opening operations and logoff do I/O in tables that are not owned by USERX under logon logoff procedure?
  
  I'm a newbie audit and the docs I read not answered this question.
  
  I just found an article on the value of 'SESSION_REC' of ACTION_NAME and I need to change my check to "by access. I'll change that and see what happens, but it shouldn't change my question.
  
  Thanks much for any help!
  
  -gary

  Hello

  I have the SYS activities audited but I never said anything about the session auditing for this particular user.
  

  "audit session;" check all successful and failed connections to and disconnections of the database, regardless of the user, by session

  Is there a way to confirm what has been turned on for auditing?
  

  You can check with the following query

  Select * from dba_stmt_audit_opts;
  Select * from dba_priv_audit_opts;

  You can also check out the link below for more deatails
  http://psoug.org/reference/auditing.html

• purpose of checkpoint rather hot flushes dbcache and update headers

  Hello
  
  We know that the checkpoint is used to empty the Sales buffers for the data files and updates the controlfile header information and data files.
  What is the purpose of writing a controlfiles header information and data (in a nutshell) files.
  
  Then we the know, when additional control point occur and complete the checkpoint occurs.
  But someone say what is the difference between the additional control point and complete control points rather than its appearance.
  
  Happen if progressive checkpoin occurs and complete control point occurs
  Thanks in advance...
  
  Published by: 944850 on August 2, 2012 23:51

  944850 wrote:
  Hello

  We know that the checkpoint is used to empty the Sales buffers for the data files and updates the controlfile header information and data files.
  What is the purpose of writing a controlfiles header information and data (in a nutshell) files.

  Check that in the case of the continuance of suit, what from Oracle to start the recovery.

  Then we the know, when additional control point occur and complete the checkpoint occurs.
  But someone say what is the difference between the additional control point and complete control points rather than its appearance.

  Tell us what do you mean by both in your own words first. It would help us to know your understanding and on this basis, a more detailed (or short) response can be given.

  Happen if progressive checkpoin occurs and complete control point occurs

  Rinse dirty implements buffer in general, what else.

  Aman...

• I have real problems, installation and update of adobe programs on my mac (OSX 10.8.4)

  Here are the problems.

  Have the new Imac 27 "with 3 TB of fusion drive.

  Have CS6 LR etc, but having real problems, installation and update of program ADOBE EVERYTHING including Flash. CS6 it got to the point where I went through the Adobe representative on the online chat and we ended up having to put in place a new log-in which allowed in part but CS6 last updated has not been updated. I took my apple Mac which did a software and check HD and all is well!

  Now I signed CC Adobe for photoshop and I can't install Photoshop CC and get the following error message. This isn't what I expect from the combination of Apple and Adobe! Can pls someone advise.

  ERROR: DS001: impossible to mount the disk image Volumes/Adobe Photoshop CC/Adobe Photoshop CC/payloads/AdobePDFSettings10-mul/AdobePDFSettings10-mul.dmg. Please check that the disk image is not altered.

  Hi NinoRMann,

  The download seems to be incomplete, and that's why your Mac can not mount the image. Please try to download it again.

  Kind regards

  Abhijit

• Combining insert and update to a form?

  Hello

  I am a developer web amateur who is new to dynamic Web sites, php and dreamweaver. I am currently working on a project that uses many forms to send data to a database.

  Data that are inserted must also be available to update if necessary. so I need currently 2 versions of each form 1 to insert and the other for the update.

  Is it possible to use a single form for insert and update, instead of using 2 forms 1 for each function. This would help reduce the level of duplication on the site.

  If so is anyway to do this in Dreamweaver? or could someone point me to an example of how this can be achieved.

  Thank you all

  Thanks for the information, disappointing that Dreamweaver cannot handle it, but at least I know where I am...

  Looks like that's what I need... http://forums.Adobe.com/message/1927405

  Once again thanks for your help