Drag the conflict of action dated the button action in Captivate 5.5

My project involves a loop. After viewing some content on a slide with audio the user returns automatically, via on exit jump to slide (#5) that contains a table of widget buttons.  Slide #5, they can select a button widget and travel to another slide of their choice.

No problem.

I also want to put a classic transparent ('Return') button on the page that allows them to click and jump to the slide #5 if they want to get out of the jam on the content before everything has played and they are automatically skipped to slide #5.

Problem is that the action of the button seems to be usurping the Jump out to the action of the kind #5 slide when slide reading over it crashes just instead of jump to the slide #5 - he's waiting for a click of the button. I tried to use a button widget instead of conventional, but the widget does not load #5 the top slide, so table of buttons (that display correctly when the slide is first played) recharge.

I hope that someone here can help me with a workaround. All your ideas are welcome. You can see the project to http://goo.gl/ATx2c , this version does not contain the buttons of interruption I add.

Thank you

Lilybiri, you gave me the answer - indirectly.

Use click box instead of the transparent button. Click on give box you a command "pause project until user clicks on. If you disable this function, the button is not incompatible with the action on the exit of the slide.

Cool!

As far as the widget on the slide table 5 buttons are concerned, I think the fact that they don't reload when you return, there is probably an artifact of the code of the key. Or something. 'Undocumented feature' ;-)

Thanks Lilybiri.

Tags: Adobe Captivate

Similar Questions

  • Click on turn off sound not working not not the button Rollover in Captivate 9

    I use the Mac of Captivate 9 version. I created a button rollover with two States - Normal and Rollover (I used a smart form for the button and selected use as a button). I selected the check box turn off sound click in the Actions Panel. However, when I publish and click on the button, I can still hear the clicking noise.

    To troubleshoot, I created a button of shape smart with only a State (without roll), tested, and I heard a clicking noise. So, the issue seems related to the rollover State.

    I've searched the forums and couldn't find an answer to my question.

    Any suggestions to correct?

    Thank you.

    A button of form in Captivate 9 has always built of three States: Normal, rollover and down.  Did you remove two States in view of the State?

    Have you installed the hotfix: https://helpx.adobe.com/captivate/kb/hot-fix-captivate-9.html

  • Drag and drop custom actions - 8 Captivate

    Good afternoon!

    I created a drag drop in 8 Captivate that has 2 targets and 4 drag sources.  3 of the sources go to 1 goal and 1 source to another.  What I try to do is:

    1. when the first source fell next on the list will appear and so on for the 4 options.

    2. when the user clicks on the button send a "Congratulations" message appears.

    3 when the wrong answer is removed, the source snaps back into the list.

    I have tried so many different configurations... any help is very appreciated.

    At wanted to check a second time, I have therefore created a short with project

    • four containers of text as drag sources: S_one, S_two, S_three, S_four
    • two targets Target1 and Target2
    • S_one and the fall of two targets are visible output
    • S_two, S_three and S_four are invisible in output
    • in my configuration, what do drag the first three sources were to return to Target1 and Target1 S_four; your installation may be different, but you set the drag source sequence, so you know perfectly well that one should apply to that target
    • set up the D & D according to the usual procedure
    • Destination1 and click 'Actions of the object' of the D & D Panel format tab. Because I'm in the CP9 who has the opportunity to uncheck 'Project to continue playing' for a single action, I could use them. Look at this screenshot:
      I unchecked all accept and indicated the correct three, drag sources, changed the number 3, because they will have to be accepted all of them on the first target. Sources of bad drag will be 'Go back' to its original position.
      After dragging S_One action was changed to show S_Two (second drag source). You must change this simple action for a standard action "Execute advanced Action" with the same unique command "S_two Show" to avoid releasing the read head. If you're familiar with this, I would use a shared action. Similar editing for the other two sources of drag, just change S_Two of S_Three to the second action and S_four for the third action.
    • Select Target2, again press the object actions, uncheck the box "accept all the ' and indicate good drag source, this time count is 1. In my setup you don't have to choose the action, because it's the last drag source. However if the drag source is not S_four for this target, you must put in a similar action, as I explained to Target1 and take action on the last drag source that will then be in the Target1 dialog box.

    As for the Message should appear, I have explained in the blog post (a first) how to create a success Message. BTW this success message is now available out of the box to the CP9.

  • The button bookmarks to the right of the House icon is now gone how can I reinstall it?

    I am running Firefox 15.0.1
    I have studied your items and came to the place where it is suggested to drag the icon for this function and drop it in the section Customize the bookmarks toolbar. When I lower it shows the icon, BUT the moment I close the palette the new icon added on the task bar disappeared.

    I've customized bookmarks management widely enough. This is why the option to reset it makes me, panic, especially I lost bookmarks more than once or twice during the upgrade to versions of FF.

    I put 20 cases where I sorted out hundreds of bookmarks.

    My modules are:
    -Adblock Plus 2.1.2
    -DblClicker 1.6.1
    -Flashblock 1.5.15.1
    -Java Console 6.0.33
    -LastPass 2.0.0
    -Lazarus: Form Recovery 2.3
    -RealPlayer browser Record Plugin 15.0.6
    -Rights to close 1.0.4
    -Tab preview 0.3
    -Tab browser 1.1

    I added this because of list of observation I've read here that there may be conflicts that could produce my current problem.

    That would suggest you can have an impact on my bookmarks button? And especially how to fix?

    I would be grateful competent contributions for helping me resolve my isssue

    Thank you kindly
    -

    • Press the F10 key or press the Alt key to bring up the 'Menu Bar' temporarily if the menu bar is hidden.
    • Use "Firefox > Options" instead of "tools > Options" If the menu bar is hidden.

    Versions of Firefox 4 + have two buttons bookmark with a star in the window customize.

    A single star button has a marker to drop that open Bookmark menu.

    The other star button without the marker drop open bookmarks in the sidebar.

    You can drag the button customize menu bookmarks with the marker in the window in the palette of the toolbar on a toolbar (for example, the Navigation bar) or the tab bar or on the left side of the bookmarks Menu items.

    You see only the bookmarks Menu button if the Menu with the bookmarks menu bar is hidden (view > toolbars or Firefox > Options).

    If the bookmarks toolbar is visible, then the bookmarks Menu button appears in the bookmarks toolbar, among other items in the toolbar of bookmarks (bookmarks), but you can move it to the right side to the left side of the bookmarks toolbar if the window customize is open.

    If the bookmarks Menu button appears on the right side of the Navigation bar.

  • Where is the button Delete?

    I looked through screens help and FAQ. My button Delete is not the case. How can I get that back?

    You're right, I don't see a delete button either. But if you want to delete a mail, I guess that's what you mean, you can do either:

    • Press Delete on your keyboard,
    • Right click on the email you want to delete, select "Delete Message".

    If you really want to delete the button on your toolbar, you can customize your operate and drag the button remove a toolbar.

    UPD: typos corr.

  • Can I remove the buttons on the toolbar

    I would like to delete the news, finance, flicker, Cup and several other buttons on the toolbar. Can I do this?

    You can click on bookmarks in the bookmarks toolbar and to delete them via the context menu or hide this toolbar completely (Firefox > Options or view > toolbars).

    You can open the Customize and drag the button added by extensions out of the toolbar to remove them.

  • On the 10.0.1, version missing the button tab. Have to do CTRl + T instead. How to bring back the new tab button?

    After update to version 10.0.1, the button new tab, which sits to the right of the last tab, disappeared. I now have to do CTRL + T instead. How can I get that back?

    You can find the button new tab showing as a '+' on the tab bar.

    You can open the window customize and drag the button new tab that indicates that a sign plus bar tabs on another toolbar and it will become a regular tools like the new button bar button tab you have in versions of Firefox 3.

    If you can not find the new button tab then click the button 'Restore Default Set' in the window customize.

  • How do I add the button refresh (and others who no longer) to the toolbar

    All of my favorite on the toolbar items disappeared... autofill, refresh, etc.

    Firefox 4 and later versions use a combined Stop/Reload/Go button that is placed at the right end of the address bar.

    During the process of loading page it shows as a stop button and once the charging button is replaced by a reload button.

    If you type in the address bar this button would then become a button go.

    Click the Reload button to duplicate the current tab in a new tab.

    To move the buttons Stop and recharge in the position to the left of the address bar, you can use the following steps:

    • Open the Customize via "view > toolbars > customize.
    • If the menu bar is hidden on Windows or Linux use "Firefox > Options > toolbars."
    • Drag the buttons Reload and stop at their previous position to the left of the address bar.
    • Set the "Reload - Stop" order for a combined "Stop/Reload" button.
    • Set the order of 'Stop - Reload' or separate them otherwise (space or separator) for two separate buttons.
  • Where is the button refresh and the drop down menu the menu to go to previous tabs

    Usually, there is a button to refresh/reload the page in its current state. You can also click Next for the "previous or next page" arrows and have a list of pages viewed before if you can select one of them to go back to not necessarily just the previous page. I guess you could just keep clicking on the arrow to the left, but it is really not satisfactory. I used these two features all the time and it is a definitive failure in the new version.

    Combined Stop/Go/Reload button

    From Firefox 4, the Go, the buttons Stop and reload are combined into a single button at the right end of the toolbar URL or address. The button changes depending on the type of activity:

    • green arrow GB when you type in the address bar
    • Red Stop ("X") button while the page is loading
    • Reload (circular arrow) to gray when the page is finished loading.

    There are separate buttons:

    1. Open the Customize the toolbar by clicking the Firefox button > Option > toolbars OR by clicking View > toolbars > customize if using the menu OR bar right click in an empty space on a toolbar and select Customize
    2. Stop and Reload buttons will show separate from the address bar and the search bar
    3. Drag the buttons anywhere on the Navigation toolbar
      • order Reload-Stop will bring together into a single button
      • order Stop-Reload will remain in separate keys
      • or drag a 'Separator' or 'Space' in the window customize between Reload-Stop and they will remain separate OR separated the two buttons with any other button
    4. Click done at the bottom right of the window customize to finish

    See: https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars

    Button front/rear

    To access the history tab on the previous/next button, you can:

    • Right-click on the previous/next button
    • HOLD the left click button rear until appears the menu drop-down

    You can also install this add-on to restore the marker drop on the previous/next button:

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  • iPhone as the movement of the button list

    Hello world

    How can I make a list of button like the iPhone with AS3.0; When you drag the buttons list, it will slip, just follow the finger position, and which does not trigger a click event of button. but push of the button will send a key event, both two kinds of work event finely together, do not interfere with each other.

    Could someone give me an idea?

    The difference between the two is that when you click on a button you release without moving. So you can work off mouseDown / mouseUp events. MouseDown file initial x, y position - we mouseUp if the position has not changed, you can check if an icon was clicked.

  • Undo the button of reset TOC?

    < captivate 7, WIn 7 >

    Hello

    I've renamed all my Table of contents slides, grouped, etc..

    When I went to click on the 'Settings' button, I clicked on the button Reset TOC.

    BANG - all my customization of the slide titles have disappeared.

    I tried to cancel via Control Z and clicking on the button cancel of Captivate. Did not work.

    I closed the table of contents without clicking on the little disk icon to save him. When I returned, the table of contents had always reset.

    ARGGHHH!

    I'll have to redo all the titles of slides and pools.

    In the case where I accidentally hit the reset button TOC again, is possible to cancel it?

    Thank you!

    I fear the answer is no. But from what I've seen only slide grouping going for a draw. Slide titles are updated to new names.

    How do you day slide titles? Do you not it slide > properties?

    Anthony

  • Tip action to show only a previous button on a slide so the learner clicked on the button Submit on Drag and Drop

    I am a user of long date Captivate and have dabbled with advanced Actions and Variables, so know just enough to get me in trouble. Hoping someone can help me with what I hope is a simple tip action:

    I am currently using CP8 and created a training where learners click on a map of building to go to different "rooms" to complete an interaction drag-and - déposer a certain topic related HR. The problem is that some of my learners test forget what 'rooms' they have already read and will click on those they have already visited. I added a back button, so that they can return to the map if they made a mistake, but now they are able to leave the slide without completing the interaction drag and drop.

    Basically, I need to hide the back button unless the learner has already completed (for example, the user clicks on the button submit to) the Drag and Drop interaction, but I'm not sure how to set up. Can anyone help?

    Thank you!

    Hide the button back to begin with. A tip action can be triggered by an event the success and failure of the & slipped. I guess that you will need at least two commands:

    • View the "back" button
    • Go to the next slide.

    It seems the simplest solution. You can also ignore the slide D & D when they enter a second time, but then you will need a Boolean variable to be turned on/off by these same events and a conditional action on which checks this variable and immediately jumps to the next slide when it is set to 1.

  • Drag the feature disabling button actions within a movieclip

    I build an interactive map and I encountered a problem. The map is draggable and I have a start and stop race function slide like an onEnterFrame function that limits how far you can drag the map. The map is displayed inside a hidden box. On the map is a lot of places that, rolled once more should appear a small dialog box with the contact information. My problem is that it only works when I disabled drag functions. When the drag functions run the buttons inside the clip map all stop working. How can I get around this?

    Drag the feature:
    Start dragging the sequence
    map_mc.onPress = function() {}
    this.startDrag ();
    };

    Stop dragging the sequence
    map_mc.onRelease = function() {}
    this.stopDrag ();
    };

    onEnterFrame = function() {}
    Limit player at the stage

    //
    If (mc_map._x < = - 1400) {}
    mc_map._x = - 1400;
    }

    Lower limit
    If (mc_map._y < = - 400) {}
    mc_map._y = - 400;
    }

    Limit to the left
    If (mc_map._x > = 50) {}
    mc_map._x = 50;
    }

    Upper limit
    If (mc_map._y > = 50) {}
    mc_map._y = 50;
    }
    }

    Example of function button:
    Distributors
    santafespringsDI_btn.onRelease = function() {}
    distributorLabels_mc.gotoAndStop (11);
    distributorLabels_mc._x = _root._xmouse + 10;
    distributorLabels_mc._y = _root._xmouse - 80;
    }
    santafespringsDI_btn.onRollOver = function() {}
    distributorLabels_mc.gotoAndStop (11);
    distributorLabels_mc._x = _root._xmouse + 10;
    distributorLabels_mc._y = _root._xmouse - 80;
    }
    close_btn.onRelease = function() {}
    distributorLabels_mc.gotoAndStop (1);
    }

    If you do what I say, you will be dragging the film which contains everything that [using startDrag (this._parent) on the background], so in the film will travel with her.  I'll post a link to an example (this same issue was raised recently so I created one).

    example: http://www.nedwebs.com/Flash/dragMap.fla

  • Define a cutting-edge Action playing audio wrap-up after all the buttons are clicked

    Hello

    I think I know the answer to my problem, but it seems not work once I pick up the pieces. I want the learner to click the 4 buttons and listening to their audio every, and then hear an audio wrap-up before moving on to the next slide.

    Here's how I think it is supposed to work:

    Drag the details: I have 4 buttons (R, A, C, E) for a 4-step process. Each button is clicked to reveal a text box, retail and the sound for each step. As soon as the user clicks on all 4 buttons I want an audio recap to play.

    Program information: I created a variable with a value of 0 for each button (Aviewed, Cviewed, Rviewed Eviewed). Then created a tip for each button action: (when R button, assign Rviewed with a text box 1 and see the Rdetails) for each letter. Thus, on the success of each button action advanced.

    Then I created another Action of the art called AudioExitSlide #. It is a conditional action that says that when all 4 variables have a 1 piece, theatre wrap up audio, ___not thing other than what to put here (continue and break doesn't seem to work). I don't know where else to mark this advanced action but the action on Exit.

    When I preview the slide, I never heard my audio recap. What I'm doing wrong here?

    Help, please.

    Yacine

    Will try to explain it, but first want to have a confirmation:

    • The audio is attached to the text caption that is displayed when you click a button? You have a problems with multiple audio clips playing at the same time, if the user clicks on the buttons for quickly, all at once?
    • What version do you use?

    The event on the output is never trust, it will execute your action after leaving the last image of the slide, and since then you are at the beginning of the next slide!

    I would also like to see a screenshot of your calendar, please? Here's a few tips:

    1. You must check the variables with each pressing of the button, which means that you will need a conditional action with two decisions:

      1. First decision 'Always' go do what you have now in the standard measurement using a standard simulated action like this:
        IF 1 is equal to 1
        Assign v_R with 1 sorry, I'm always variable v_ to avoid assigning the same name to something
           
        See the Tx_A
        Play Audio_A I prefer to use this command on an object, audio because you never have two clips playing simultaneously
      2. Second decision "WrapCheck" will check the variables
        IF EV is equal to 1 AND
        v_A is equal to 1 AND
        YaeUb is equal to 1 AND
        v_C is equal to 1
        ????    will tell you what to do here after answering my questions
  • Is it possible to set actions on the button "submit" a Quiz question?

    Is it possible to set actions on the button "submit" a Quiz question? I want to advance to the next slide or continue when they get the question right, or come at the end of the tent, they are allowed. I would like to eliminate the Next continue/button. Why does take two actions to come out of the slide? I use 8 Captivate.

    Not possible, or you you screw up the functionality of the quiz slide. Submit button is the most important object of each slide of the default questionnaire.

    I suspect that you are not on 9 Captivate but on an earlier version? Perhaps reading this article:

    Question Question slides in Captivate - Captivate blog

    You don't need the next to all button if you do not allow the review. If you allow the review, you cannot uncheck, because otherwise the user will be pasted on slides during the review. You can drag the next button under the light of the button (see article). The Send button will trigger actions Success/Last attempt, that you can use to your advantage.

    If you want to limit the submission of a single click process, you will find a scenario in the same article

Maybe you are looking for

  • Tecra Z50-A-15W Win 7 freeze while sshutting down the State

    Hellocan anyone help - my all new laptop has a very weird problem - when restart, caused by updates - it freezes on the closing state and I have to press and hold the button for 5 seconds so that it can start again. He does this every time. No event

  • upgrade to osx 10.9.5 to 10.11.4

    Try to upgrade 10.9.5 to El Capitan 10.11.4 the system tells me there are 10.11 - not to mention that release, and besides, I'm not able to find any place that allows to download an intermediate version. Copyinfg the installation application my MBook

  • Unchecked songs play on iPhone

    Since the upgrade to the new iTunes/Apple music, my phone had ALL my music sync, checked and unchecked. When I connect my phone to iTunes, the "sync only checked songs" option is enabled, but still, everything is on my phone. I can't mix all the song

  • Cannot increase the font size on an epub

    I have an Acer Iconia A700 I have Aldiko Book Reader Premium installed & have loads of ePub files & similar. I read all of them, only one problem, with an authors books, the font size is small & I can't resize it. Someone told me to remove something

  • PowerEdge T110II - Dell Perc H200

    Hi all Is there a chance to use at the same time SAS and SATA HDD on the Dell Perc H200 controller installed in the PowerEdge T110II? Currently I 3xSATA HARD drive and I thought to add additional SAS HDD, so is it possible that controller to be taken