Drag the control example and how to record a value of the indicator?

Hello world

I want to drag the Boolean buttons on my front panel in the time of execution, how can I do?

I remember that I have seen an example or why, it's a map on the front panel, but I don't remember the name TT someone knows?

and the second question is how to store a value of the indicator, like the first time, you set the value and close the vi and run it again, the value will remain unless you change in the second run time?

Thanks in advance

Thanks to you two, are there good examples of mouse followed the structure of the event available?

and my second question is for example: read a file using the vi, I created the first, that the value of all the positions of the button on the front panel, and the 'get file vi extension' shows the name of the file on the front panel. then I close the vi and open it again, the button positions is always there where they are, but the file name string is empty.

How can I save the filename so indicator when I opened that vi still once, if not the other position button file selection, the filename indicator still shows the previous name?

Tags: NI Software

Similar Questions

  • I saved my adobe files temporarily muse in my computer when I restart my PC I see not the mt files, please tell me how to recover my files and how to record my entire Web site file using save option.

    I saved my adobe files temporarily muse in my computer when I restart my PC I see not the mt files, please tell me how to recover my files and how to record my entire Web site file using save option.

    When you talk about 'temporarily' as record files in the temporary folder and then by restarting the machine will lose files. You can save the file in any location stored as reader or office and then reopen the case should show all of the content without any loss.

    If the files are deleted or lost there's no way to recover those, sorry if this is the case.

    Thank you

    Sanjit

  • I have vista and how to record a program to a usb port to another user who has xp to use the program

    I have a samsung program for my phone, I installed and I have vista, I want to know how to record the program on a USB for another user may install and use the program, because they have a netbook with no cd it must be saved to the usb, but the other user has xp so please can you me how to record the program on usb

    Hello

    You cannot save a program that is installed on a USB key or any other

    Once installed a program spreads during the operating system at various locations

    You must download it again and save it on a USB flash drive, then transfer it to their netbook via a USB flash drive

    or get them to download it themselves directly to their netbook so they are available on the net

    For more information on the program, contact samsung

    http://www.Samsung.com/us/support/contact

  • How to record the addresses in a message list, Thunderbird and how to record a list of Thunderbird in E

    I've just sent an email to 50 people and want to save these email list addresses in Thunderbird.
    How do I do that?

    And how to save an address list in Thunderbird to an Excel spreadsheet? (I can do the opposite--copy an Excel column in a new list and it will create a list.)

    I am involved in a non-profit, and these issues are very important in terms of remittances of e-mail management, etc..

    Thank you.

    A mailing list is a sublist of an address book
    An address book can have more than one mailing list...

    Contact in an address book that has a valid email address, can be placed in a mailing list.

    Download this addon:
    https://NIC-NAC-project.org/~kaosmos/morecols-en.html

    install the addon info:
    https://support.Mozilla.org/en-us/KB/Add-ons-and-Extensions-FAQ?ESAB=a & s = insyall + addon & r = 0 & As=s#w_how-do-i-Install-an-Add-on

    Then in the header of an email you sent where it is said to and lists of contacts.
    Click on one of these name/e-mail address and in the drop-down select menu:
    'Save the recipients addresses' > 'as list (all).

    A pop up appears with all the names that are
    Make sure that you selected the correct address book under which the list will appear.
    Name the list
    Click OK

    You should then see a sublist under the address book selected in "address book".

    You can save any address book.
    Select the address book
    Tools > export

    choose where to back up
    Give the file name
    Save as type "separated by a .csv Comma
    Click on save.

    This csv file can be opened by Excel

  • Why don't I have the bluetooth devices in my control panel and how do I get it?

    I am trying to install a wireless mouse. My Windows HELP tells me to click on bluetooth devices in Control Panel. I'm in the control panel and no bluetooth device it.

    I am trying to install a wireless mouse. My Windows HELP tells me to click on bluetooth devices in Control Panel. I'm in the control panel and no bluetooth device it.

    What is your make and model of computer?  If it doesn't have bluetooth hardware and drivers installed for bluetooth of the equipment - match then any bluetooth device is not going to happen.

  • As a dynamic form on the form? And how to get their value

    Hi all

    I want to make a form that would be a granular user to choose from a specific list of values to be passed as a parameter. Here is a script, it creates what I need, but the names of radio buttons are not unique. Can you please how to make, at the end of this form (window), I get the value of the selected radiobutton list item?

    #target photoshop
    app.bringToFront();
    var par = Array("Select your choise","test 1","test 2", "test 3");
    
    var rez = ask(par);
    alert(rez)
    
    function ask(par){
    wask = new Window('dialog', '');
    wask.orientation = "column";
    wask.alignment="top";
    wask.spacing=0;
        grs0 =wask.add('group');
        grs0.spacing=0;
        grs0.add('statictext', undefined, par[0]);
        grs0.alignment="top";
        grs0.preferredSize.height = 40;
            grs1 =wask.add('group');
            grs1.spacing=0;
            grs1.alignment="left";
            grs1.preferredSize.height = 20*par.length;
            grs1.orientation = "column";
        for(var i=1;i<par.length;i++){
            var g = grs0 +i;
            r= "rb"+i;
            r = grs1.add("radiobutton", undefined, par[i]);
            r.alignment="left";
            }
    bt1 = wask.add ("button", undefined, "Select");
    bt2 = wask.add ("button", undefined, "Close");
    
    bt1.onClick = function(){
    
    }
    
    wask.show();
    }
    
    
    
    

    I think that there are at least two ways to do something like that. One way would be to give the names of controls. You can find and then by name.

    var par = Array("Select your choise","test 1","test 2", "test 3");
    
    var rez = ask(par);
    if( rez == 1) alert(wask.findElement('rb1').value);
    
    function ask(par){
        wask = new Window('dialog', '');
        wask.orientation = "column";
        wask.alignment="top";
        wask.spacing=0;
        grs0 =wask.add('group');
        grs0.spacing=0;
        grs0.add('statictext', undefined, par[0]);
        grs0.alignment="top";
        grs0.preferredSize.height = 40;
            grs1 =wask.add('group');
            grs1.spacing=0;
            grs1.alignment="left";
            grs1.preferredSize.height = 20*par.length;
            grs1.orientation = "column";
        for(var i=1;i
    

    Another way would be to use an eval statement in the loop that creates the controls. Something like

    var par = Array("Select your choise","test 1","test 2", "test 3");
    
    var rez = ask(par);
    if( rez == 1) alert(wask.rb1.value);
    
    function ask(par){
        wask = new Window('dialog', '');
        wask.orientation = "column";
        wask.alignment="top";
        wask.spacing=0;
        grs0 =wask.add('group');
        grs0.spacing=0;
        grs0.add('statictext', undefined, par[0]);
        grs0.alignment="top";
        grs0.preferredSize.height = 40;
            grs1 =wask.add('group');
            grs1.spacing=0;
            grs1.alignment="left";
            grs1.preferredSize.height = 20*par.length;
            grs1.orientation = "column";
        for(var i=1;i		   
  • Drag the indicator

    Hello!

    I am interested how to display numbers in minor ticks on the slide indicator.

    On the attached example, I used a logarithmic scale. Numbers in each decade only (0.01, 0.1, 1, 5). I want to have the numbers to minor ticks (0.02, 0.03, 0.05... etc)

    Thank you very much!

    Hi toni2,.

    You have to use this lsider property nodes... Please see the attachment...

    Skeins of T and greetings,

    srikrishnaNF

  • How to: open the control panel and check if Windows Update settings in Windows 8

    If you're running Windows 8 and you are not sure if you get the latest updates and patches Windows updates then the following video should help. It guides you through opening the control panel and how to check your Windows Update settings.

    Remember, make sure that Windows 8 is up-to-date on your computer, you must have the latest updates of Windows installed.

    You may also need to make sure that your computer is updated the software and drivers for your hardware or to trobleshooting purposes make sure it isn't updated drivers for your hardware. Here is a video that will show you how.

    I hope everyone finds these helpful videos. If you have any questions leave a message below. Remember, it is advisable to have the active Windows updates, however, there are certain circumstances (for example, troubleshooting) disable it temporarily is a good idea.

  • Table and how to get the mutation

    Hello friends,

    I am unable to understand the changing error and how to get back on it.

    Having read some of the documents but could not able to understand real-time scenarios...

    Can someone help me understand the changing error by providing a good example and how to avoid this problem.

    Appreciate your quick response.

    Thanks /.

    Transfer error occurs when you try to query the table even who wrote you the trigeer for DML triggers.

    Resolution will be different for different scenarios.

    1 if possible - avoid select / update the table even on the trigger. Try to use: new /: old.
    2. you do not have the choice to avoid the sql on the same table, you have a working arouond.

    Write a package with 2 processors, one with parameters and others do not have parameters. and the package should have a few global variables to access the arrays of values.

    Write a rowlevel of triggers and the value: new.values to with parameterized procedure, procedure 1 will affect you all these parameters to global variables.

    write a statement-level trigger calls the second procedure that will make the necessary applications / action for you.

  • Linux Server (how to record the out command has put on another file.)

    Hi all
    I have Q?
    How do to record the out command put in another file.

    Ex: #ps - ef
    This particular exit cmd I need to record another file.
    is it possible... If possible... Please let me know
    And how to record the history of orders under Linux.

    DF h > /oracle/output.log

    Oracle - name of the mount point

    Concerning
    Asif Kabir

  • I have an iMac (2015).  When I open Garageband, there are only two buttons on the control bar, play and stop.  No record button, rewind or ff.  Where are they and how can I make it appear?

    I have an iMac (2015). When I open Garageband, there are only two buttons on the control bar, play and stop. No record button, rewind or ff. Where are they and how can I make it appear?

    Try to enlarge the GarageBand window by dragging the corners of resizing.

    If she looks like this, your window is small:

    You can also try to click the double arrow at the end of the toolbar to reveal more options.

  • When I go to save, or export a document, my columns of dialog windows are all screwed up. Question: how to format them so that they are permanently attached? I'm tired of dragging the column over and over again. See for example the attached screenshots

    Screen Shot 2016-02-17 at 6.12.16 AM.png

    Open the dialogue window, the column width should expand. The new dialogue window size must be the same for subsequent exports. If you want to change the default column size, hold down the option key when you drag the small dividing line between the columns, (even if the new size apply to export and save the window).

  • Click and drag to control the frame advance

    I have a layer that contains a video clip instance named wwr_mc, who has 19 frames. I figured out how to script, a function of turning constantly move from one image to the other by rolling on the prev or next buttons, using this code:

    wwr_mc.gotoAndStop (10);

    var t:Timer = new Timer (250.0);
    var dir:int;

    t.addEventListener (TimerEvent.TIMER, onNextFrame);

    next_btn.addEventListener (MouseEvent.ROLL_OVER, Right);
    next_btn.addEventListener (MouseEvent.ROLL_OUT, stopIF);
    function right(e:MouseEvent): void {}
    dir = - 1;
    t.Start ();
    wwr_mc.nextFrame ();
    }
    prev_btn.addEventListener (MouseEvent.ROLL_OVER, Left);
    prev_btn.addEventListener (MouseEvent.ROLL_OUT, stopIF);
    function left(e:MouseEvent): void {}
    dir = + 1;
    t.Start ();
    wwr_mc.prevFrame ();
    }
    function stopIF(e:Event): void {}
    t.Stop ();
    }
    function onNextFrame(e:TimerEvent): void {}
    wwr_mc.gotoAndStop (wwr_mc.currentFrame + dir);

    }

    This type of navigation, although functional, isn't really codusive what I am trying to accomplish. I would like to be able to click and drag the mouse and have the frameworks to advance forward or backward according to the direction of movement of the mouse.

    I tried to use the MOUSE_Move event with very limited success.

    Any suggestions would be helpful!

    Thank you!

    I don't see anything through this link that I can relate to this announcement.

    If you want to change managers only based on orientation (x) that the mouse is moved, then you need to test the current position of the mouse to the last known position...

    var startPosition:Number = mouseX;

    wwr_mc.gotoAndStop (10);

    stage.addEventListener (MouseEvent.MOUSE_MOVE, onMouse);

    function onMouse(e:MouseEvent): void {}
    If (mouseX-startPosition > = 0) {}
    wwr_mc.nextFrame ();
    } else {}
    wwr_mc.prevFrame ();
    }
    startPosition = mouseX;
    }

    I don't know what you find as being too fast.  When you do things from an event extended, such as a mouse moved for a while, then it is likely that the event runs the event handler function several times... as fast as the rate of the file allows it.  So if you want more control over the speed at which function nextFrame/prevFrame to mouse moves effect calls, then you must build in some form of delay.  In the example below, it takes the form to remove the mouse event listener move for a short period using a synchronization function (setTimeout in this example, but you can use the Timer class as well)

    var startPosition:Number = mouseX;
    var delayTime = 250; 0.25 s

    wwr_mc.gotoAndStop (10);

    stage.addEventListener (MouseEvent.MOUSE_MOVE, onMouse);

    function onMouse(e:MouseEvent): void {}
    stage.removeEventListener (MouseEvent.MOUSE_MOVE, onMouse);
    var currentPosition:Number = mouseX;
    If (currentPosition-startPosition > = 0) {}
    wwr_mc.nextFrame ();
    } else {}
    wwr_mc.prevFrame ();
    }
    setTimeout (setListener, delayTime);
    }

    function setListener() {}
    startPosition = mouseX;
    stage.addEventListener (MouseEvent.MOUSE_MOVE, onMouse);
    }

  • In the Photos of El Capitan how to record a double published in a separate with its own name and the ID file file?

    In the Photos of El Capitan how to record a double published in a separate with its own name and the ID file file?

    Only by exporting - with Photos (and iPhoto and Aperture) - you can have several versions of an image by duplicating the image (control - D), but this does not create an image file separated until you export - it creates a separate edit list in the database that applies to the original when you watch or export the photos

    Photos as it were its predecessors is a non-destructive control Digital Asset Manager (DAM) which does not any changes to files in the database but built a list of validation

    LN

  • How can I access my computer in order to remove downloaded files that has not deleted using the control panel and the usual functions to delete?

    I recently received from remote assistance installed a new anti-virus program. During using the remote technician, I he observed several open windows because it deleted the files that were left by previous anti-virus programs on my computer.  These files prevent the download of the new program.  As I watched him navigate through my programs and files, I noticed that there are a lot of game files that have been deleted by using the functions of the control panel and uninstalling still in my computer.  The technician of 3-4 programs installed on my computer while he removed residual files of the antivirus and promptly removed from these programs when it was correctly installed my new anti-virus program.  I would really like to know how to access files or records what he did and then delete the game files that I thought were removed.  I downloaded at least 100 trial offers for sets of objects hidden over the years and you don't want no trace with my memory of the computer.  No help available out there?

    Hey,.

    You can follow this link to recover lost or deleted files:

    http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

    also, look for the file/game:

    http://Windows.Microsoft.com/en-us/Windows-Vista/save-your-search-results

    Hopefully this should help you.

Maybe you are looking for