Dragging sound and clicks

Similar Questions

• Locking sounds and keyboard clicks went with iOS 9.2.1

  Hello everyone. Last week I updated my iPhone 4 iOS 9.2.1. Since then, I lost the Lock Sound and click on keyboard.

  I checked both were always enabled and then performed a reboot. It did not help.

  The phone otherwise works as expected: sounds and vibrations are working perfectly, so this is (probably) not a hardware problem. I didn't have any problem with the phone (phone calls, cards, applications etc) so I guess that the new version of iOS responsible and properly installed.

  Anything else I should look for?

  Thank you.

  I have the same problem on iPhone 5 c. Who can help fix?

  I need really keyboard clicks!

• Firefox bookmarks bar does not allow me to drag-and - drop Web site icons. I went into the display and click on "bookmarks bar".

  Firefox bookmarks bar does not allow me to drag-and - drop Web site icons. I went into the display and click on "bookmarks bar". bookmarks bar but her but its not allowing me to drag and drop the icon on the toolbar. I tried everything it is supposed to do, but his does not work. his frustration.

  Stef. /. \

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible.

  • View > toolbars
  • Right click on empty toolbar space

  Use the toolbar (Customize) to open the Customize and set the toolbar to display items.

  • Make sure the "bookmarks toolbar items" are on the personal bar
  • If "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the palette of the toolbar in the window the bookmarks toolbar Customize
  • If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar
  • If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration
  • https://support.Mozilla.org/KB/how+to+customize+the+toolbar
  • https://support.Mozilla.org/KB/back+and+forward+or+other+toolbar+items+are+missing

  You can check the problems caused by a corrupt localstore.rdf file if the above didn't help.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• IPhone 6 produces the sound by clicking in the right corner and same dust is collected

  IPhone 6 produces the sound by clicking in the corner right and even the dust is collected!

  Can you describe the issue in more detail? When exactly it happens? Take your device at the Apple Store for further diagnosis.

• HP laptop with win. 7 pro - sound and video hang up or drag when you play videos on Web sites

  My wife and I have a laptop HP with Windows 7 Pro, and this problem happens on both computers.  When we try to watch a video either on youtibe or any other website the video and sound lags or crashes and then plays for a few seconds and then it even once.  Does anyone know whatt could cause this?  And how to fix it?  Thank you!

  Hello

  Try the following.

  First, download the Flash uninstall utility on the link below and save it to your desktop.

  Flash Player Uninstaller.

  Once the download is complete, close all browser windows and start the program uninstaller.  Once done, restart the laptop.

  Then, download and install Firefox , then using Firefox, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before download. 

  Close all browser windows before you run the installer of Flash.

  Start Firefox and see if the video play Ok - if they do, close Firefox, open Internet Explorer and click on the same link Adobe Flash above to get a command prompt to install the ActiveX component.  Once completed, restart Internet Explorer.

  If you still get the problem of loading, run a check of the speed of your internet connection by using a site like the one on the link below, where it is causing the problem.

  http://Speedtest.NET/

  Kind regards

  DP - K

• Static and sounds by clicking on p209tx

  It's a week since I got this machine and I started experencing static sound in my headphones and external speakers, sometimes the problem is resolved automatically by itself and after restarting your PC, it comes back.

  I've tried disableing beats, but nothing happened.

  Another thing is valume has a mind of its own, it changes automatically, I mean, you would get a noise at level 20, but sometimes it isn't still audible.

  Well

  Discount windows 8.1 did not really solve the problem (cause of all my settings have been restored). So I did a reset of the system too, it does not solve the problem, but it helped me to analyze what who and where was the problem!

  So, this is what happened: -.

  I did a reset of the system and noted the the sound was nice (really nice).

  So I'll start all my software displays while listening to music and he had no problem with the sound until now, until the

  I have installed these 2 software

  (1) Virtualbox

  (2) the browser Maxthon cloud.

  (I need virtualbox I experiment with many different operating systems). I think that the problem was caused, as a sound card is shared by more than 1 os when you use virtualization (I used to run 4 operating systems in parallel, so a sound card is shared by 4 os).

  and the second thing I have that whenever I opened Maxthon browser of cloud, the sound starts clicking and poping up.

  If the problem was definitely with the browser.

  so in fact when we talk about "it's a random problem", it was when I was watching at the same time all while listening to music.

  So thanks for trying to help me. Finally I could enjoy an audio sound quality real time.

  Now, I think it sounds really good

• I converted a clip video .mov .avi and inserted in Windows Movie Maker, but it's only playing as sound and no video

  Original title: Windows Media Player
  I converted a clip video .mov .avi and inserted in Windows Movie Maker, but it's only playing as sound and no video, why?

  There may be some compatibility issues with .avi files...
  try to convert the .mov file to .wmv format before
  import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your clips on the main screen .mov...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• How to loop a section of sounds and animation not at the beginning of the animation?

  Hello, I'm a total noob to Flash in the hope of doing something quickly reliatively. I'm using version Flash Professional CS6 track for this purpose. However, I am a little unsure of how to work this loop button. What I'm trying to do is create a small interactive game. I would like to have the opening be an animation of title which plays only once and then comes to a music section and 2 buttons ('play' and 'how to play') that will make a loop until the player decides which to click. When I used the loop tool, it created a section for me to drag around. I dragged to include sound and animation of the section I want to loop. However, when I tried to play the animation at the beginning, she skipped the opening and went straight to the loop part. In addition, there not completely loop. I'm quite inexperienced and still learning, how can I get the Flash to play at first and then search the section loop and have it loop continuously until someone pushes the button? None of the tutorials that I've seen so far has on this topic and if it involves entering code then I am at a loss. Thanks for any help.

  What you seem to be describing could be done using a movieclip for animation in a loop.  Create a movieclip symbol and build this animation loop with the sound on the inside.  Plavece while, in a framework at the end of the animation of a master schedule.  If you place a stop() command in this framework as well then stop the main timeline and animation in a loop (movieclip) is expected to play on its own at all times.

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• iMac will not start. From sound and sometimes Apple, but no further details. How can I get?

  Just got an iMac and it will not start up.  I can get the sound start and, sometimes, the Apple logo, but it stops there.

  Have tried to use 'command-option-P-R' together. Have you tried "D".  Tried "control C".  Are there other possibilities that I could try?

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

  If this does not work then your hard drive has failed and must be replaced. Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• Need sound and webcam drivers for Satellite A660-156

  Hi all

  my hard drive is physically damaged and replaced with a new one. All the data and setting have been copied.

  But I found that you no sound and webcam drivers are installed. I had found them and correctly installed, but still no change. See its icon with indication 'no sound', click on it to solve the problem, but no problems were discovered.

  Offered to see additional information or close the window. The Toshiba site found two audio drivers, but it does not help.

  No idea how to solve this problem?

  Thnx in advance!

  Satellite A660-156 belongs to the PSAW3E series.
  Did you find this series on the Toshiba driver page?

  This series is in the list and you can find the drivers for Win 7 64 bit it.

  You can find the Webcam driver v 1.1.1.16 for Win 7 64-bit and two different audio drivers;
  It is NVIDIA v 1.0.10.0 and the other is v Realtek 6.0.1.6069

  I think you need the first v 1.0.10.0

• Satellite A30-921 PSA33E - no sound and the missing "speaker" icon

  Some time ago, I lost the sound and also the missing "speaker" icon.
  But the sounds in the control panel and all its grayed out. Restarted the system and everything has been restored.

  Once again lost both and rebooted but is more than this noise of restoration. Icon was back at the helm of the tasks, but when you click on it, all greyed out.

  Uninstalled the audio driver and used the disk utility to try to restore the sound, but does not work: visited the download from Toshiba site and I tried the Realtek driver, no luck. Checked with my Bios Update and I have the latest version.

  What is going on???

  If anyone can help...

  Congratulations to all.

  Hello

  I think that you must first remove the old sound driver.
  Check if there is an entry in Control Panel-> Add & Remove programs.

  In addition, you should go to the Device Manager and should remove the sound card in the list of devices.
  Just mark the sound card and remove it.
  Reboot the laptop.

  After that restart of the operating system (Win XP) should start looking for a new device and should ask the audio driver.
  This is the time to point the driver package, and files that you downloaded from the Toshiba European page.

  Check to see if that would help!

• Qosmio F10 - driver of sound and the modem does not install

  Hi all.

  Firstly, my computer is 100% up-to-date. I recently had to do a complete reinstall of my OS
  I got all my drivers and what not, install, but the driver sound max and the modem driver will not install.

  For the modem, it asks if I want to install it, I click Yes and it starts the installation and then he finshes and nothing comes. It is not installed.
  I then try my sound, and it seems as if it will install, but then I get an error that says: no driver is found, please reboot your computer.

  Or something around those lines anyway.

  Can someone help me please?

  Hi, have u tried in safe mode. Why do not you download the latest drivers? You can try this site http://driverscollection.com/?H=Qosmio%20F10&By=Toshiba

• Construction of the installer wants to sound and Vibration Distribution but my vi do not need

  My vi contains some common entries and a regular to read some 4-20mA, see attached data acquisition.

  So I save a new project and build an exe with the vi, no problem, see project files attached.

  

  Then I start building the Setup program by clicking below to install the libraries. I think that I click on the right side of the law library?

  

  

  But lo! OR say I need sound and Vibration Distribution, now, where does? My vi has no sound and vibration functions...

  

  I click on no, the installer don't build Labview.

  I click Yes, Labview kept asking me where is the audio library and vibration.

  

  I bought a NI Developer suite, expensive things like costs about US$ 4000 +. My software vendor told me that I don't have the license for the sound and Vibration Distribution.
  So, what should I do? Clicked on some bad settings during the generation of the installer? Is there a way around this problem? Thanks in advance!

  Hey,.

  Try to repair or uninstall/reinstall your DAQmx driver as described in the following KB: http://digital.ni.com/public.nsf/allkb/8C37AB992EB29EA7862571680056E78A?OpenDocument

  Christian

• Server 2K 8 Remote Desktop no despite its "don't bring to the local computer" active, impossible to find sounds and Audio devices?

  I'm running Vista 64 to connect to a remote computer that has Windows Server 2008. When the remote desktop connection via, under the options for sound local computer that I "Make to this computer" activated. However I still get all the sounds, and the volume in the lower right corner icon has a red x on it. Under the heading reading devices, it says "no audio device is installed". In Device Manager, I don't see anything for sound and audio devices.

  I found an article that mentioned the sounds and Audio devices in Control Panel, however I have only 'His' option - which opens the same as right click on the volume with mute icon and choosing of reading devices. I don't see anything on the RDP Audio Driver settings.

  Here's a screenshot of my desktop remotely, with the Control Panel, Device Manager, and open windows of his:

  http://img27.imageshack.us/img27/959/screenshotxqp.jpg

  How to activate the sound remote desktop?

  Hi Tsaton,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums, since it is linked to the issue in Windows Server 2008 machine. Appropriate in instances of Windows Server.

  Please post your question in the Forums of Windows Server.