draw the table using report generation tools

Similar Questions

• Insert a picture into a Word table with report generation tool.

  I was wondering if it is possible to use the report generation tool to place an image in the cell of a table in a Word document?

  Hello

  Yes, you can do this by using the Word change cell VI under reporting > specific word > Word tables in your diagram of function pallet blocks.  After you create a table, you can modify specific cells and send the file path of the image saved on your computer to that specific cell.  I have set up an example that I have attached here as well to help you with this.

• How to get data from an Excel file exist using report generation tools

  I try to use the Excel vi get the data of the report generation tool, but I can't understand how to activate a path can be explored in the right type for the VI.  I tried to use the new Report.vi, but this does not work unless you use a template.  It will not open an existing excel file and make an open report to extract data from.

  Essentially, I have a bunch of excel files that have data in them, and I want a VI allows to analyze the data.  I'm going to pull in all the data directly from the excel file so I don't have to reproscess them all in text so I can use the more standard datasheet live but to convert even the excel file programtically in labview I still need to be able to open the excel file and get the data?

  I found my problem.  It turns out that only not to have had a problem with the tool box new report vi.  I had accidentally wired an input control of path of folder instead of an input control of path of file to it.  Changing the file type took care of her and I was able to access excel files, I tried using the new report VI to extract the file, and Excel Get Data to extract the data.

• How to create new worksheet in excel without using report generation tools

  Hello

  Im trying to create a file with 8 spreadsheet excel. I am currently using scripture to the worksheet of the vi for that file. But how to create multiple worksheets in an excel file without using the report generation toolkit module of the OR?

  Concerning

  Jay

  Hello

  You can use the nodes property with the class selected as Activex Excel and create all the tools to Excel. See the attached example.

  Kind regards
  Constant

  (Bravo to give good answers, mark it as a Solution If your problem is resolved)

• Excel graph legend formatting - report generation tool

  Hi all

  I am currently using the Labview 11 report generation tool and do not understand how to change the font for the legend of a chart properties. This is a screenshot of an exit from the attached example.

  Help file for the Font.vi graphic Excel said it should be able to change the caption, but I can't seem to understand how to configure it to do so. If anyone can guide me through the steps or tell me what I'm missing, I would be very happy.

  Added minor corrections (deleted end characters of the line of the column and row headings).

  Ben64

• How to use the report generation tool to get a list of bookmarks in a Word template

  I'm working on a project where I need to use the report generation tool to fill a fairly long Word template. MS Office report Express VI can have entries for a maximum of 17 bookmarks that is not close enough to what I need to do.

  I wonder if there is a way to use the lower level screws report generation to read the word template and return a list of the names of bookmark in the form of a table 1 d of string. The dialog box that allows you to implement the Express VI has this ability, but I'm not finding a way to scan the document programmatically.

  I'm sure I can't be the first person to encounter this problem and I hope someone out there has found a good solution.

  Found the answer to this one that I was looking for the forums. Apparently, you can do this directly through everything in the VI report tool, but there is a VI in Wordsub.llb do that.

• Can I open an existing report using a report generation tool

  Hi all

  Suppose I have create a new excel report today and close the program, tomorrow I open the same program and instead of creating a new excel file, I need to update the test results data in the excel file that was created yesterday, is - it possible.

  I'm confused because there is no option called report open in report generation tool, there just create report option.

  Probably NOT the guy can work on that... Sorry if this is a; existing Eja?

  Is there a method to open an existing report?

  Pls help...

  Thank you

  You can use the VI 'New report' with all entry level models as the path to the report on the disk, and then use "Excel Get Data" for a set of data in the report.

  

  -Bob

• create the new file using report generation express vi

  Hello

  In my application, I need to write that certain data in spreadsheet Excel. For whom I created an excel template and I used the express vi report generation Toolkit to record appropriate data in the columns of the place. I need a new file created every day by the name of the day and write the data that he rest of the day. I have problems, create the new file using this express vi. I tried to use the low level vi but not able to make properly.

  Join my code and the excel template.

  Help, please.

  Thank you!

  I suspect that your problem is illegal characters (' / ') in your path, certainly it is the case in your original vi. You need to format your path, something like this (underscore instead of a slash stroke):

  

• Excel sort using Report Generation Toolkit

  Hello

  The query is related to Excel sort using Report Generation Toolkit.

  At the beginning I write values into three columns permanently. After the while loop, it's stops the third column (C) should be placed in increasing order and columns 1 & 2 also modify accordingly.

  Please find the enclosed. Zip and help me solve the problem.

  Kind regards

  Chick S

  Its best to collect all the data in a table, then sort the values (ascending) then write in excel that will solve your problem in a simple way

• error 7, report generation tools do not work after construction.

  Hello guys:

  only one problem. Help!

  I tried to build my programs with the application designer, application exe builded unluckly has no work well as before, I checked some similar post of this forum and added that NIReprot.llb in my project and rebuild, the problem is always held, my program add some text, tables and graphics in a word template with this report generation tools , but it always gives error 7 and ' NI_Word.lvclass: new report subVI.vi--> NI_report.lvclass:New Report.vi--> Report.vi new Creat->...' error information.

  is there anyone can give me some clues on this annoying problem.

  Thank you very much!!!

  zybear,

  Suggest you take the simple test vi and start adding all the features of your original application.  It accumulates in the stages and test at each stage.  I hope this helps you identify the problem.

• How to know the tables used in packages of a schema.

  How to know the tables used in packages of a pattern that I have connected.

  SELECT DISTINCT referenced_owner, referenced_name

  Of all_dependencies

  Owner WHERE = "MY_USER_NAME".

  AND type ('PACKAGE', 'BODY of PACKAGE')

  AND referenced_type = 'TABLE '.

• How to insert image from mysql into the table using php and create the checkbox in the table?

  How can I insert image from mysql into the table using php and create the checkbox for each data as a vote? Here is my code...

  WELCOME

  connect_error) {die ("connection failed:".)} $conn-> connect_error); } $sql = "SELECT no, Calon, ID, of course, the Image OF THE candidates." $result = $conn-> Query; If ($resultat-> num_rows > 0) {echo ' '; export data of each line while ($row = $result-> fetch_assoc()) {"echo"}}

  NO	Candidate	INFO	Vote
  " . $row ["no"]. "		-" . $row ["Calon"]. " -" . $row ['ID']. " -" . $row ['class']. " "; } ECHO ' ' ;} else {echo '0 results' ;} $conn-> close();?} > hope someone can help me because I am a newbie in this program... need to finish this project... Thank you.

  If you have saved the file name in the database, it's pretty simple.

  echo '';
  

  Is the same for the box:

  echo '';
  

  If you have saved the image file in the database, it is much more complicated. I recommend you store only the file name in the database.

• The table used to run very quickly

  I read about 22000 records of weak financial data in a graph of candel stick. The table used to run very quickly, but now it works slow Koala after some small changes. Ideas of probable causes?

  I figured out that the disabledDays was originally the slow almost 10 times slower

  disabledDays = "{offDays}.

• Trying to create the table using Clause any Union with Select multiple stmts

  The motion seeks to get the substring of the value to for example.
  If the value is * ASA 2 * then so do ASA
  where as if the value is * 1.5 TST * it sholud come as TST as wise for others too.
  I am trying to execute stmt SQL written but in error as below:
  
  * ' ORA-00998 must appoint this expression with the alias column 00998.00000 - must appoint this expression with the column alias. "
  
  CREATE TABLE TEST_CARE AS
  (
  SELECT row_id, old_care_lvl, SUBSTR(old_care_lvl,3), len test_care_lvl FROM
  WHERE LENGTH (old_care_lvl) = 5
  UNION ALL
  SELECT row_id, old_care_lvl, SUBSTR(old_care_lvl,3), len test_care_lvl FROM
  WHERE LENGTH (old_care_lvl) = 7
  UNION ALL
  SELECT row_id, old_care_lvl, SUBSTR(old_care_lvl,3), len test_care_lvl FROM
  WHERE LENGTH (old_care_lvl) = 14
  UNION ALL
  Row_id SELECT, old_care_lvl, SUBSTR (old_care_lvl, 3), LEN test_care_lvl
  WHERE LENGTH = 7 AND old_care_lvl (old_care_lvl) = "Regular."
  );
  
  I want to create the table using the above given the multiple selection by using the Union ALL clause, but trying to create run query error like "ORA-00998 must appoint this expression with the alias column 00998.00000 - must appoint this expression with the column alias.
  
  Please guide me how to approach to solve this problem.
  Thanks in advance.

  Try this->

  CREATE TABLE TEST_CARE
  AS
    select *
    from (
            SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
            WHERE LENGTH(old_care_lvl) =5
            UNION ALL
            SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
            WHERE LENGTH(old_care_lvl) =7
            UNION ALL
            SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
            WHERE LENGTH(old_care_lvl) =14
            UNION ALL
            SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3),LEN FROM test_care_lvl
            WHERE LENGTH(old_care_lvl) =7 AND old_care_lvl ='Regular'
        );
  

  N.B.: Not tested...

  Kind regards.

  LOULOU.

• Set the position of the cursor in the text added (to make the part of the text in index) in WORD using Report Generation Toolkit

  I would like to generate a report in WORD using the report generation toolkit.

  Whenever a text is added to the report, the program should put part of the text index. The problem I am facing with is to set the cursor position in the current location of the text.

  Any suggestions?

  Hello!
  I think that's what you wanted (see attachment).

  First, you must set position for each loop, so after adding the table, your cursor index need to increase the number of added characters. That's why I have included the text of the report, Append - to get the position of the cursor at the end.

  Indexing begins with 0, so you need to set the 3 and 7.

  Hope you get what I mean