drive c not appearing is not in the calendar of Disk Defragmenter

Similar Questions

• Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  CD/DVD players use different lasers to read CD DVD vs.  Eventually, your DVD laser has grilled.  It might be time to replace your CD/DVD drive.

  HTH,

  JW

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

  I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

  Hi phillipt84805120,

  Make sure that you have the latest Adobe Acrobat Reader DC (Adobe Acrobat Reader DC install for all versions) installed on your computer to use the services of export to PDF as the older version of Reader support any more.

  Alternatively, you can use services online at https://cloud.acrobat.com/exportpdf

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• My computer says "drive does not have the ability to access this service" when I am trying to connect and to convert a JPEG to PDF.

  My computer says "drive does not have the ability to access this service" when I am trying to connect and to convert a JPEG to PDF. That's the only reason I pay for access to Adobe Reader...

  Why used it allow me to do this? I have done several times before.

  Hi tinas,.

  Looks like you may be using an earlier version of the player, which now is no longer able to access the services Cloud of Document PDF. Please visit: Error Message: "Drive doesn't have the ability to access this service."

  You can download the most recent version, CD player, of https://get.adobe.com/reader.

  Best,

  Sara

• Error message: drive does not have the ability to access this service.

  Trying to convert pdf to Word Doc.  Error, said that drive does not have the ability to access this service.  I use this program all the time.

  Download and install Acrobat Reader DC.

• I bought a license of adobe product, which allows to transfer PowerPoint to word in March. But when I want to use it today, there's a wrong message "drive does not have the ability to access this service!

  I bought a license of adobe product, which allows to transfer PowerPoint to word in March. But when I want to use it today, there's a wrong message "drive does not have the ability to access this service!

  That looks like you are using an older version of reader; See https://forums.adobe.com/docs/DOC-5891

• I try to sync my MS Outlook calendar & contacts to icloud/iphone, ipad.  Now icloud holds my calendar and contacts, but when I try OT set an appointment, I get the dreaded message that it is not in the calendar for this account & wi

  I try to sync my MS Outlook calendar & contacts to icloud/iphone, ipad.  Now icloud holds my calendar and contacts, but when I try to set up an appointment, I get the dreaded message that it is not in the calendar for this account & will not be counted.

  My schedule is extremely important as are my contacts.  How to export the icloud to get back them to outlook.  I use MS Outlook 2010.  I can't put the icloud as my default - Help

  Which calendar you use, there will be two, one to iCloud and who is not, you must be in the iCloud calendar

• Microsoft Outlook 2016 "could not read the calendar. Unknown error.

  iCloud version 5.1 Windows last 10 develop Outlook 2016 Dell XPS8300

  iCloud moved very well and without error messages. iCloud Contacts and reminders are OK, but when I access iCloud calendar I get this message: "could not read the calendar. Unknown error'

  Three facilities on other similar configuration PCs were flawless with every feature works perfectly.

  Have reinstalled Office 365 and iCloud 5.1 on affected PC several times with the same error when access iCloud calendar.

  Corrections and troubleshooting suggestions are most appreciated.

  Surprisingly, all that was necessary to solve this problem was to select the iCloud in 2016 Outlook tab and press the button refresh!

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• CD RW drive does not have the recording tab

  I have problems with my being considered by Windows XP as a CD-ROM drive only CD burner. The recording tab is not available on my system properties. I exchanged the drive with the other 9 that I have here that work fine on my other machines with Windows 7 and Vista, byt XP refuses to see them as anything other than ROM discs

  I tried to go in the registry at the location following and ensuring that the drive type is set to "1".

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\CD Burning\Drives\Volume {fa124c43-d6c8-11de-8776-806d6172696f}

  NO CHANCE!

  I also passed to Component Services and enabling the IMAPI service in and outside, without success. Windows will simply not see the CD as anything other than a player.

  With the NERO Burn software, I am able to burn CDs and DVDs without problem, but I was hoping to quickly burn discs CD - RW using Windows without having to load to the top of NERO, as I used to be able to do before.

  My system is composed of:

  • XFX nForce 780i Mobo
  • Pentium D 3.73 GHz bumped 775 processor Presler
  • NVidia Geforce 9500 GT video
  • 4 GB OF RAM
  • Phoenix Bios Version P06

  If anyone has any ideas, I would be grateful, it seems that something in Windows does not see the drive correctly. Nine discs can't be all bad. I even out the hard drive and put in the condition with Vista in the machine and the CD player is considered to be a writer, so there is no hardware problem. He came down to somewhere in the XP operating system and I went through with my knowledge. There must be a service of components or a registry key to twist it and raise the windows of the hardware

  Ray

  Hey Ray,

  Seems that happened for quite a long time. The problem that you are facing may occur due to upper and lower filters apply on optical drive Firmware. Try following the steps below and we'll see if it works!

  Click on the Start button in your desktop computer, and then click Run.

  In the Open box, type the following text:
  Regedit.exe.

  Click the OK button.

  Click on the plus sign (+) next to HKEY_LOCAL_MACHINE.

  NOTE: When you click the plus (+) next to a folder, it will expand displaying the folders it contains in the left pane of the registry editor. When a file is highlighted, the contents will appear in the right pane of the registry editor.

  Click on the plus sign (+) next to SYSTEM.

  Click on the plus sign (+) next to CurrentControlSet.

  Click on the plus sign (+) next to control.

  Click on the plus sign (+) next to the class.

  Click {4D36E965-E325-11CE-BFC1-08002BE10318}.

  On the right side of the window, click UpperFilters.

  Click on edit in the menu bar.

  Click on remove and then click OK.

  On the right side of the window, click LowerFilters.

  Click on edit in the menu bar.

  Click on remove and then click the OK button.

  Click Register and then click on exit.

  Restart the computer normally.

  NOTE: once you have completed these steps, check for other CurrentControlSet records in the registry that can be titled CurrentControlSet001, CurrentControlSet002, CurrentControlSet003 and so on. If these files exist, you must follow this procedure for every folder CurrentControlSet delete upper and lower filters.

  Saurabh yapi | E-mail address is removed from the privacy *.

• MY CD/DVD DRIVE DOES NOT READ THE DISC READABLE

  MY CD/DVD DRIVE DOES NOT READ ANY READABLE DISK ALL OF A SUDDEN.

  I DON'T KNOW WHAT IT IS.

  I CAN HEAR THE COMPUTER TRYING TO READ BUT IT ME SAID JUST THAT HE HAS NO DISC INSERTED OR THAT THE DISC IS BLANK WHEN ITS CLEARLY NOT.

  IT would NOT be RETURNING to PLAY AUDIO CD IN iTUNES or WINDOWS MEDIA PLAYER.

  HELP PLZ

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean power
  and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• CD/DVD drive is not detected, the disc is missing or disconnected

  Well I have not tried to play anything or anything either burning on my laptop in a while and all of a sudden is not working more I followed suggestions on the microsoft site, but when I went into Device Manager to check on my drive anywhere it lists same CD-ROM/dvd-rom I'm so confused, I don't know what I tried to use microsoft not fixed and it's just as stuck as I am all he tells me it is than its disconnected or missing and cannot be found.

  Oh and while I'm asking questions my sound stopped working a few months back the small volume in the lower right corner icon has an 'x' next to him now and he says: no audio output device is installed, I tried following the suggestions online for this with no luck either. I hope that its not anything internal since I just had the motherboard replaced by a few months before this happened

  Thank you very much I hope you can help!

  Hello

  Well it still might be hardware or wiring.

  Restart to make sure that nothing is inteferring with the process.

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• DVD/CD driver does not properly, the discs are not read.

  I tried different discs and none are read which is very annoying, because I can not install my new printer! When I checked the driver, the following message is displayed:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I click for solutions and he's looking for a few seconds and then nothing happens. I tried it 3 days ago and still today, but it still does not work, can I do?

  Thanks in advance for any help

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.