Drive DVD-ROM 37 error message Code in the Device Manager on Satellite M30

Hello

I'm new to this forum and I wonder if anyone can help? I have a Satellite installed 30-106 M which has the above CD. At present, it does not work when I go to Device Manager, the error massage that I have is that follow 'Windows cannot initialize the device of this hardware driver. (Code 37) ».

Can someone offer me some advice please.
Thank you
Trevor

Advertisement

Hello

I studied in the Microsoft Knowledge base, and it seems that this error is displayed because the driver returned error in her routine to the driver entry.
I think that you need to uninstall the driver, and then click find the hardware changes to reinstall or upgrade the driver.

You can do it in Device Manager. Otherwise, you can remove the drive in the Device Manager list and after restart of the new mobile operating system should recognize the drive again.
After this procedure, you should test the device if it will work.

Tags: Toshiba

Similar Questions

  • Network Controller is not found"error message appears in the DEVICE MANAGER

    Hello! I installed WIN 7 Prof 64 bit on my laptop Compaq Presario CQ62-410US and Device Manager shows that the ETHERNET CONTROLLER is not installed correctly. I've been using the appropriate drivers:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5048...

    I tried to find a solution here:

    http://support.HP.com/us-en/document/c02592699

    "But the" 'LAN Power Saving ' option of "System Configuration ' component is missing.

    I uninstalled installed new driver LAN wireless with no result.

    Thank you very much for your help! Miron

    Hello:

    See if it works... Now, it's to install the Ethernet controller (wired), not the wireless network controller.

    Make sure that you have installed the first Intel chipset driver, then restart.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-87204-1&cc=us&DLC=en&LC=en&OS=4063&product=5048735&sw_lang=

    Then install the ethernet driver second on the list at the link below:

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • Satellite A110 - SD card reader - error message code 10 this device cannot start

    I have a number of cards memory SD, who used to work with the machine's card reader but now gives a code 10 this device cannot start, error message - is this a problem XP - ideas appreciated...

    Hello

    Well, it sounds to be really an XP problem. Eventually he s corrupt registry entry.
    Just try to remove the SD card from the Device Manager reader, and after restarting again try to install it again

    Next

  • Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

    I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
    In the device manager says code 10 DEVICE can NOT START.

    Help, please!

    Thank you!

    Hello

    If you read here:

    http://support.Microsoft.com/kb/943104

    The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
    Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

    Welcome them

  • DVD - rom is not recognized by windows xp Device Manager

    I have a laptop Satellite M115 with XP and I noticed that yesterday that my cd-rom does not work.  It does not appear in Device Manager at all.   There is a place in systems that say CD-ROMs, but when I click there nothing.  I tried the "fix it" does not.  I looked to try to find the upper and lower registry keys and are not there either.  I even tried to reinstall the cd-rom, but there is no entry for it.  I tried to start with cd player and he did, but the meter turns, it just starts.  Fisically, the drive seems to work, when I put a cd in the drive, he lights up as if it is going to work but does not work.  I can not find anywhere, it is as if it disappeared completely.  I'm not able to be executed.  I rarely use the drive so I know that it is not worn.  I tried to access other programs that would use the player, such as windows and dvd media movies and they say that the drive is disconnected or not.  I have not upgraded to Vista, so it isn't that.  I still have XP.  Do you think that a security update could have wiped out the ability to find the cd-rom?  If so, what is it?  I do not have a virus I know.  My antivirus can't find anything and cannot care Windows online.  No infection.  I would eliminate the pc with a clean install, but it will not read my disc! I am at my whits end!  Any help at all would be deeply appreciated.

    XP discussion groups:

    http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

    Link above is to the XP newsgroups.

    There is a list of groups of discussion XP to the bottom of the left column.

    The XP "general"(lien ci-dessus) and XP "Help and Support" Newsgroups are widely read / used. ".

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

    The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

    We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

    The specifications of the laptop are:

    HP Pavilion dv7

    Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

    4 GB OF RAM

    64-bit Windows Vista

    Hello

    Check with HP Support, their online documentation and drivers, and their known forums
    questions.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Re: Satellite A200 - 10 error code in the Device Manager on webcam

    I had some difficulty trying to get my webcam on my laptop working again.
    Tried to install a new update but it would not work because of some error - 10 of the Code.

    I tried to uinstall using camera Toshiba as well and re installed and that would not work due to some files of corona that she did not.

    Please help me really want this camera to start working again!

    Thank you

    Hey Buddy,

    What of your OS (operating system)?
    No info on this subject? ... Why?

    In your case, I'll try this:
    Remove the old webcam driver and reboot the laptop.
    Run CCleaner to clean the registry and Windows
    Stop and try again
    Install the latest driver from the Toshiba page.

  • Windows XP Pro SP3 does not include 1 TB WD internal SATA drive Green even if it is marked in the Device Manager doesn't work properly

    Using motherboard Asus P5N - D, the Sata drive is displayed in the bios.  I use a Maxtor IDE drive as primary and I just wanted to add more disk space.

    Hello

    Try to connect the external hard drive on another computer and check if the same problem persists.

    I suggest that you set the drive letter for the external hard drive and check if that helps.

    To assign a drive letter to a drive, a partition, or a volume, follow these steps:

    1. Sign in as an administrator or as a member of the Administrators group.
    2. Click Start, click Control Panel, and then click performance and Maintenance.

      Note If you do not see the performance and Maintenance, go to step 3. Performance and Maintenance appears in control Panel only if you use category view. If you are using the classic view, performance and Maintenance does not appear.

    3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
    4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
    5. Click on Add.
    6. Click assign the following drive letter if it is not already selected, and then accept the default drive letter or click the drive letter that you want to use.
    7. Click OK.

    For more information:

    How to change drive letter assignments in Windows XP

    http://support.Microsoft.com/kb/307844

  • Second Hard Drive not recognized / climb (but it IS listed in the Device Manager)

    I have a HP Compaq DC7800 convertible mini tower running than Win 7 Pro 64-bit

    I installed a second hard drive, and while I can see listed in the Device Manager, it is not mounted.

    That is to say, it is not in the computer > field at all.

    The second hard drive is a Hitachi HDT721032SLA360 ATA Device

    Under the hardware ID, it is said: IDE\DiskHitachi_HDT721032SLA360___ST2OA38E

    I thought it was a driver problem. Device Manager indicates that it uses the Microsoft 6.1.7600.16385 driver.

    I can't find a Hitachi driver for this player. My understanding was that this drive would NOT need drivers.

    I have it in the plug of P5 (I think it is P5, it's at the end of the cable with the primary hard drive) and I have a data cable sata from the sata port on the rear of the disc in the slot sata on the motherboard next to the slot in the place where the main in drive is plugged.

    The only sites that list the drivers for this drive are all spam (thanks, google) sites.

    What I have to change something in my Bios?

    Thanks in advance.

    If the drive is listed in the device but not 'computer' Manager, it must be mounted or a new volume must be created. Please see HP - partitioning and names of hard drives (Windows 7) for more information on using the Windows Disk Management Console.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

    my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

    Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • Satellite 2450-201: update driver DVD - IDE #1 error

    Hello

    I need help to upgrade the dvd for my laptop model Satellite 2450-201 with internal dvd writer.

    I have LG and I got this message at startup: error IDE #1. Any suspicion that I speak with Dep. error tech and he said that the problem of compatible driver. I think that good performance with the system.

    If I update the bios from 1.3 to 1.5 it will solve this problem?
    Or do I need another brand name model to replace the old DVD with DVD - RW?

    Hello

    As someone from the tech, adj. suggested that this error message appears because the car is not compatible.
    The disc has a bad master/slave setting and so the BIOS can not recognize the drive.
    To resolve this problem, you must upgrade the laptop with compatible player.

    I found a compatible Toshiba PA3255U-1DV1 DVD-RAM drive. But this isn't a burner.
    I suggest to contact Toshiba service partner in your country to control the compatible player and supported. So you can be sure that you will get a good player.

  • Driver DVD ROM & DVD + RW drive problems

    For some reason any time my DVD Rom and my DVD + RW readers had a problem. In Device Manager, I get a yellow exclamation and error "damaged or missing. (Code 39) "Apart from these TWO discs. Can anyone help?

    It is a common problem with the Windows operating system. Microsoft has created a tool to solve this problem. You can run the tool of the Internet link following which will identify the problem and solve the problem:
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

  • I get this error message: Code 80070663

    I get this error message: Code 80070663 and it seems that there is no solution for it to what tells me the support. Please give me a process step by step in order to fix this problem please!

    Step by step this path below that can help you to correct the error.

    Click on the "Start" button, type "Windows Explorer" in the search box.
    Click on the "Windows Explorer" in the "Programs" menu
    Navigate to the path "c:/users/Allusers/Microsoft/Office/data", find "opa12.dat" file and rename it to "opa12old.dat".
    When you restart Windows Office and open a file, it prompts you to turn on the Windows desktop, then activate it online.
    Reinstall the updates from the Windows desktop, and then restart the computer.

    This solution of error on this site:
     http://www.regmender.com/how-to-fix-Windows-Update-error-80070663.html
    Hope it can help you. Good luck.

  • I am trying to install update of "Mail Junk Email Filter (July 2011) (KB905866) and Dungeon, error message, Code 800F080D.» How can this be repaired?

    I get an error message (Code 800F080D) whenever I try to install an update - ' Mail Junk Email Filter (July 2011) (KB905866).»  Help!

    All that I know is, one day, when the logon to the computer, the update has been installed!  It seems that yet another update has been installed and it must have installed both at the same time.  Sorry I hadn't decided to go back to the thread earlier, but my problem is solved, for now.  Thank you.

  • installed a device and get an error message "(code 10) Impossible to start the device"

    Installed Pinnacle Studio 12

    Hi Bernard,.

    Please provide the exact model of your device number.

    12 code: This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system.

    This error can occur if two devices that are installed on your computer received the same (Input\output) of i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS (Basic Input Output System), the operating system, or both). This error message can also appear if the BIOS did not allocate enough resources for the device.

    Method 1: Run the fixit available in the link below and then check if it makes a difference

    Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Reference

    Explanation of error codes generated by Device Manager
    http://support.Microsoft.com/kb/310123

    http://TechNet.Microsoft.com/en-us/library/cc732199 (WS.10) .aspx

Maybe you are looking for