Drive DVD RW E no longer works.

Similar Questions

• A60-155 dvd multi burner no longer works correctly

  don't think I've had this laptop for a month yet. the dvd multi drive worked fine, but now it will play only DVDS but not CDs of any kind-it just read more or if she fails to pick up what is cd, it just turns and makes rattling noises. How can I get to recognize the CD and CD-Roms again?
  I tried to uninstall it and now the computer knows it's there, but the shortcut in my computer icon has disappeared, how can I get it back?

  Hello

  What shortcut you mean exactly? It is very strange that, shortly after, the material has this kind of function of failure. You did some changes or something that can be the reason for this? You can burn all types of CD?

  In my opinion, you should try to reinstall the OS using the recovery CD. If there is the same problem again, it may be a defect in the material.

• Drive DVD M30X 165 are not working properly

  Hello
  I bought this phone 2 weeks ago, but now the drive hurts... sometimes it do not read the CD, after some testing, it works but its's not me on my nervs...

  Now, I wanted to burn a cd, but this does not also, ahead nero and burning of windwos xp program simply cancel before writing on cd...

  Hello Freddy

  Your device is a new and should not worry about this. Everything is possible of new units. Please check if there is a problem with the help of original music, CD or DVD that you can find in every store. If you still have the problem with the help of this original media it may be hardware malfunction.

  In this case, please contact your local dealer or service partner, and if the unit is defective it will be changed. The warranty will cover this cost.

  Either way, I use Nero software of engraving with three different machines and have no problem at all.

• DVD-RAM UJ8505 no longer works on Satellite L series

  My cd/dvd drive does not at all; When I go into the Device Manager there is a yellow triangle, and it says "Windows cannot load the driver for this hardware device.

  The driver may be corrupted or missing. (Code 39) "and to seek solutions, nothing happens.
  How can I solve this? Oh and as you say properly since I'm not that familiar with computers so need for detailed instructions! Laughing out loud

  Hello

  The solution that you can find the Microsoft article under http://support.microsoft.com/kb/314060/en-us

  Bye and good luck!

• When upgraded to windows 8 hdmi has stopped working, ATI driver driver HD 5000 series no longer works

  Hi here is my setup:

  Laptop: graphic Driver HP TM2-2000el, OS Windows 8 Pro, ATI Mobility Radeon HD 5000 series.

  Problem: When I've upgraded to Windows 8, the ATI graphics driver has stopped working, actually it works with the intel HD built in driver. In fact, I can't send the HDMI signal to my TV. I downloaded the last Catalyst AMD released on April 24, 2013, the regular and the beta version, but do not work. On the Device Manager error code 10 (impossible to boot the machine).

  If someone has worked on this problem of wrong answer please

  Problem solved with this driver:

  http://leshcatlabs.NET/index.php/2012/12/leshcats-catalyst-12-11-Beta-11-unifl-WIN8/

• Satellite Pro L300 Windows 7 Upgrade - DVD player no longer works

  Hello

  I upgraded my Satellite Pro L300 Windows Vista to Windows 7 a few months back, now, I noticed the Player DVD no longer works! All ok in Device Manager, but the habit of reading anything.

  I have use a Toshiba Windows 7 upgrade disk that could be my problem. I used the Windows 7 Upgrade Advisor and Windows 7 Ultimate disc.

  I tried to download and install the latest Windows 7 32 bit DVD Toshiba drivers but still no joy.

  Can someone advise procedure I should follow to correct, if I need to downgrade back to Vista, hope not!

  Thank you.

  Optical disc drive is properly listed in Windows Explorer?
  Do you have problems with some specific discs?
  Original music and film discs are readable?

  What player you use to watch movies?

• Satellite P25 - DVD-R/RW does not work, the reader does not see the drive

  I have a P25-S609 player gave me problems since it was a new computer. He totally went out then, I replaced the Multi-lecteur with a new FW UJ - 811 t and the thing still does not.
  DVD-RAM fuction is has never worked. I tried different disc and now the new drive.

  I am really disgusted.
  Help!

  Hello buddy

  > the player gave me problems since it was a new computer
  Can you please tell me how old is this model of laptop? It takes about 5 years now. And after a long period of time, you come to the conclusion to exchange the optical disk drive. Strange!

  Anyway have you checked the compatibility with the FW UJ-811 t? the assignment of PIN on all optical disk drives is not the same.

  In any case for DVD - RAM features, you must install driver DVD-RAM. I ve used a long time ago and DVD-RAM P20 worked very well.

  I put t know if the same is available for the models of laptop computers in the United States but check it please United States support page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp

  Good luck!

• Recently, I uninstalled Nero 7 Essentials on my computer. Now my drive (D :) no longer works. I tried to install Nero again, but the drive recognize more no disc when I put it.

  Recently, I uninstalled Nero 7 Essentials on my computer.  Now my drive (D :) no longer works.  I tried to install Nero again, but the drive recognize more no disc when I put it.  What should I do to fix this?

  On reboot, Windows should automatically detect the new hardware and install a driver.  Once this done, go to Device Manager and select update.  Or go to the manufacturer of your computer and get an update for the reader.

  http://www.ehow.com/how_7332133_uninstall-DVD-driver.html

• CD-ROM/DVD-Rom no longer works

  CD-ROM/DVD-Rom no longer works, so I tried to update the driver manually, but he says "can not load material" I tried check the solution, it says "Windows cannot start this hardware device because its configuration (in the registry) is incomplete or damaged (Code 19).» How can I solve this problem. I'm not a person good tech

  Hello Vancouverhome,

  I suggest that you run by following the below Fix - it. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  1. click on start this image and then click on all programs.

  2. click on accessories and then click Run.

  3 type regedit, and then click OK, if you are prompted for an administrator password or a confirmation, type the password or click on allow.

  In the navigation pane, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  4. in the right pane, click UpperFilters.

  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 8.

  5. on the Edit menu, click on delete.

  6. When you are prompted to confirm the deletion, click Yes.

  7. in the right pane, click LowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you. Go to the section "Next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

  8. in the Edit menu, click on delete.

  9. When you are prompted to confirm the deletion, click Yes.

  10. exit the registry editor.

  11. restart the computer.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks

  Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks. IMac originally purchased in 2010. DVD 5.9.5

  I'm having no problem with my DVD.

  Could you give more details about those who are out of work?

• Replace old hard drive with an SSD.  Nowsome keys on the keyboard no longer works.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Replace old hard drive with an SSD.  Now some of the keys on the keyboard stopped working.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Probably nothing, it's probably a fluke. Try resetting the SMC and the PRAM by iMac Intel SCM and reset the PRAM. If this does not work, try a USB keyboard to test, if it works then your original keyboard has failed and must be replaced.

• I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll

  I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll, then when I fixed an error occurred -FSOUND-Sample_Load@16.  Also, ITunes says that there is a registry problem. We have inadvertantly deleted something or can other software recently installed it cause it was working fine until we installed a vivtar camera.

  Can provide you advice on how I can overcome this problem.

  Concerning

  original title: update windows

  Hello

  Method 1:

  I suggest you uninstall all third-party software and then try to perform the system restore.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 2:

  I also suggest to perform a system analysis File Checker.

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Post back with the results for further directions.

• Printer HP photosmart 8150 in Vista driver no longer works.

  My HP photosmart 8150 printer no longer works with Vista, on two different PC I own. I put it on XP and it works very well. How to get Microsoft to solve the problem of one of their updates or patches. It allows to work very well with SP2. the only available driver is built into Vista.

  Hi Everett,

  You can try to download Windows XP drivers and try to install it in compatibility and see if it helps.

  For more information see the links:

  Downloads of software & driver - HP Photosmart 8150 Photo printer

  Make older programs in this version of Windows

  Hope this information is useful.

• Drive DVD (E) does not work in a HP Windows Vista Premium system

  When I install a DVD in drive E, nothing happens.  MagicJack is installed on the computer and using the DVD player as well.

  In the device - drive DVD/CD-ROM Drives Manager - Tiger Jet CD-Rom USB Device (MagicJack) and TSSTCorp CDDVDW TS-L633M ATA devices are listed.

  Apparently the MagicJack drive does not drive the function E.

  Registry Editor fix by removing the UpperFilter and UpperFilter and reboot, lines did not work.

  Thank you

  RBB

  Try uplugging your magic Jack for a few seconds and install it back, it can set up an another hardware profile and take a next unassigned drive letter. Or change the drive letter of your DVD drive assignment:
  Click Start-> right click 'Computer'-> manage-> click on 'Continue' on the prompt UAC-> in "Computer management" slot, click on "Disk management" "Storage". On the right pane, right click on your DVD drive and click on «Change drive letter and path...» "-> click on the button 'change... '. "under-> assign a new drive letter.

• Drive DVD/RW Optiarc AD - 7201S 5 doesn't work or does not work

  I have a HP desktop with an Optiarc AD - 7201S 5 DVD player PC. It worked perfectly but stopped working months ago. I tried Delete upper/lower suggested on other forums as registry keys, uninstall and reinstall microsofts windows drivers, attach it to the tool and I even erased from my hard drive and did a cover of the plant and it still does not.

  Watch DVDs it either does not start or starts and plays for a few seconds and then stops dead. try to restart the movie, I get a message telling me to insert a dvd cause there isn't one in the drive.

  games it that either won't start at all or with world of warcraft for example installs the first disc very well and when I go to the second it stops dead and will not work without lights on the disk. It is not the cause of discs, I have a second identical computer and the drive that a disc install perfectly.

  read and write dvd/rw worked well in the past have not tried recently (I backup important images, website etc. files on the disk and always worked previously.) I now use a usb flash.

  the details are below:

  driver date 21/06/2006 (never had always used the disk those installed by windows, do not know where to find those to update if there is, windows says Joana re updated.)

  6.0.6002.18005 driver version

  Driver details:

  C:/Windows/system32/drivers/CDROM.sys

  C:/Windows/system32/drivers/GEARAspiWDM.sys

  These two files are the same on there another system with unit of work.

  I really need to get this drive working again. someone at - it ideas? or should I just rip the reader to take a hammer it and just get a new one?

  Thank you!!

  Hello

  It seems that the reader or any other material goes down.

  / Settings (BIOS/CMOS) often F2 as you start - set to CD/DVD 1 safe order then try
  to start on a Windows disc. This should be very telling.

  Check with a real computer store (not the leeks the glances at a Best Buy or other stores to large surface) or
  HP support.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.