Drive external DRIVE does not appear in my computer

Similar Questions

• Toshiba Canvio Basics HARD drive does not appear in my computer

  Hello

  I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc

  Please help and Windows 7 or windows 8.1 PC do the same thing.

  Hello

  I found the description of the product of this external HARD disk:

  Product features:
  • USB 3.0 - powered portable add-on storage.
  • Voltage of bus capable USB, no need for AC adapter.
  • Easy to use with no software to install.
  • Adapts to large digital files with spacious storage capacity.
  • Protect your drive (internal shock sensor and ramp loading technology).

  Specifications
  • Capacity: 1.0 TB
  • Interface: USB 3.0
  • Transfer rate: up to 5 Gb/s
  • Speed: 5 400 rpm
  • Average access time: 12ms
  • Cache buffer: 8 MB

  It is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
  The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
  Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable

• My USB hard disk drive does not appear in my computer, but is seen in the BIOS and not in disk management or anywhere else! What should I do now?

  I use windows 7 Professional 64-bit. The hard drive I had does not appear in my computer, but it does in the bios. What should I do to make the data available to me in the hard drive?

  Sunday, January 20, 2013 11:46:37 + 0000, Nikesh1123 wrote:

  I use windows 7 Professional 64-bit. The hard drive I had does not appear in my computer, but it does in the bios. What should I do to make the data available to me in the hard drive?

  On which computer data has been put on this drive? What is the file
  the drive system?

• USB flash drive does not appear in my computer on XP

  but he is assigned a drive letter in the management of devices. If I right click on the drive in the device management, it goes to the folder in Explorer
  but then disappears

  Hi gstercea,

  Thanks for posting in the Microsoft Communities. The problem description, I understand that the USB does not appear. Provide the following information for the better understanding of the issue:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  I suggest you follow the steps in the article.

  Advanced troubleshooting tips for General USB for Windows XP problems

  Let us know if you need more assistance.

  Thank you.

• DVD - RAM drive does not appear in my computer (Satellite M30)

  Hello
  I have a rug * a DVD-RAM UJ 820 in a Satellite M30
  It seems that the driver does not work and the DVD unit is not showing in my computer - the device however seems to work - I was told a solution may be to download the driver and re-install again. Any idea where I can get that? You have any other suggestions on how to fix this?

  Thank you

  Hello

  drivers are located on the download site for the driver from Toshiba:
  https://EU.computers.Toshiba-Europe.com
  under Support & downloads, download drivers

  If this does not help, look around this forum. I saw some other threads on this DVD player.

  Good bye

• Aspire 5740g and the dvd drive does not appear in 'my computer '.

  I had to have a new installed hard drive I got an error message saying old default disk.

  I also had a clean install of windows 7 that I was uncertain if my discs that I created would be ok.

  So I have not all the gifts that have been installed on the laptop like new. Now, I find that the dvd drive is not displayed in my computer and nothing happens when I insert the disc.

  This has happened a couple of days and I did a restore of the system to a previous restore point.  Does anyone know how to solve this problem.

  I also do not have the secure egis - any ideas how to get this back

  Then... your DVD is probably defective.

  did you check in the BIOS if it is listed on bootable devices?

  Press F2 at startup, if it is not listed, it is defective.

• Drive does not appear in my computer

  For unknown reasons, lost a disc Belarc Advisor shows it is present as E: ST500DM002-1BD142] (500.11 GB) hard disk drive 2, s/n W2ABSDBV, revKC45, SMART healthy Statue

  This disc has been defined as a slave drive.

  However is not in drives that may be chosen for cleaning and do not appear in click on COMPUTER.

  I tried the system restore, and he indicated that e: could not be found.

  Is it possible to restore this drive and make it work?

  Hello

  Please keep us updated.

  Please feel free to respond if you need help. We will be happy to help you.

• the cd/dvd drive does not appear in my computer or in other places! so I can't start the CD

  After upgrading windws vista to windows 7, I can't find cd/dvd drive in my computer (sony vaio) .plz I can do to fix this?

  Hello Rash0411,

  Thank you for your message.  First start by going to your computer manufacturer's website and download/install the latest driver for your device.  We will check the following:
  Click 'Start' > right click on 'Computer' > select 'manage '.
  Click on Device Manager.
  Expand "readers of CD-ROM/DVD-ROM" (you see a yellow!, or you see your drive at all?)
  If you don't see any of your drive, you may need a bad connection of your drive power to the motherboard or power.
  Please let us know.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My dvd drive does not appear in my computer. It is powered but sends no data. Someone knows how to solve this problem.

  I don't know what to do. I tried the Microsoft ATS but no dice.

  Hi Michelle,

  1 did you change on your computer before the show?

  I suggest you to perform the following troubleshooting steps to resolve this problem.

  http://support.Microsoft.com/kb/982116

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Satellite A350-CD/DVD drive does not appear

  My CD drive does not appear in my computer and no longer works

  Help, please!

  Thank you

  Hi denis,.

  It appears perhaps with yellow exclamation point in Device Manager? With the code 19 error? I ask this question because I founded this interesting article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/314060

  In addition, it would be interesting to know if the drive is seen in BIOS or not because in the worst case, need to replace the disk.

• My external hard drive will appear in my Computer.But when I try to send files (right click) in the "send to", the drive does not appear.

  I can access the drive and it's files already on it. But I am unable to send files, more. There are a lot of remaining space on the external hard drive. And I use Windows Vista if it gives more clues to the problem. I can't seem to find the answer to this. Large number of people to open disk management and change the assigned letter. But that's only if (if it appears) if the player initially does not appear under my Computer.Again, i have no problem to access this drive and its contents once it is plugged into my laptop. It just does not recognize under the column "send to." It allows. That's how I was able to get what is on there now on it first.

  Hope you understand. I'm not called a techie.

  Help, please. Much appreciate any one can give me.

  Hello

  You can try the following steps and check if it helps:

  Method 1:

  a. open a Windows Explorer window.

  > Browse to your folder system hidden below.

  C:\Users\(user-name)\AppData\Roaming\Microsoft\Windows\SendToB)

  OR

  b. open the Start Menu, and then type shell: sendto in the search box and press ENTER.

  c. Add or remove any drive, folder, or shortcut app like you who uses the option open with to send it to the window below.

  NOTE: for example: Notepad, paint, Photo Gallery, dvd player, any folder, etc. For a reader, right-click on the drive in the computer, then click on create a shortcut placed on the desktop before you move the shortcut here.

  Method 2:

  You can also try to change the registry settings and check if it helps.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  a. Click Start, type regedit in the search box and press ENTER.

  b. navigate to the

  For the current user only:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  For all the user accounts on the computer:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer

  (d) to display all the readers in the context Menu "send to" in

  > In the right pane of Solution Explorer, click with the right button on NoDrivesInSendToMenu and click on delete.

  e. click Yes to confirm the deletion.

  f. close regedit.

  g. restart the computer to apply the changes.

  Hope this information is useful.

• My external HP Personal Media Drive device - does not appear on my computer

  My external HP Personal Meda drive does not appear on my rhubarb, I tried all USP ports on my computer and it will not be displayed. When I connect my HP Personal drive to my Labtop there is no problem, it presents itself. Any suggestions? p

  Hello

  1 - is the external hard drive not detected in the Device Manager?

  2.

  3. did you work before?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to download and run the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Also check if it is detected in disk management.

  a. Click Start.
  b. Ttype diskmgmt.msc in the search box of start, then press ENTER.

  c. check if the external drive is detected.

  Method 3: Try the steps from the link below, which will help you change the drive letter.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Method 4:  Also I suggest you to try the steps from the following link:

  Tips for solving problems of USB devices

  Hope this information is useful.

• do I pay my device external hard drive toshiba properly installed but that does not appear in my computer?

  do I pay my device external HDD toshiba usb 3.0 installed correctly but that does not appear in my computer?

  Hello

  Please post your question on the French forum.  Thank you.

  http://answers.Microsoft.com/fr-FR/Windows/Forum/hardware?TM=1366324404146

• Toshiba Stor.E Canvio HARD drive does not appear

  Hello

  I got a Toshiba Stor.E Canvio for about 2 years without problems

  By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.

  Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.

  The message I get is

  "Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.

  The HARD drive itself is turned on, the light is on... but I'm stuck now

  Any help would be appreciated

  Gary

  I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
  http://Apple.StackExchange.com/questions/130304

• my computer detects the usb pen, but when I try to send files to it in "send to" my hard drive does not appear.

  Usb detects the dvd player and my external hard drive, but does not detect my hard drive. I tried to disconnect the external hard drive, but still, it does not detect my hard drive. The drive letter is E: and pen usb H: external drive letter is F: HELP!

  When I try to send files to it in "send to" my hard drive does not appear

  What hard drive, external or internal? Normally only removable devices appear in the mailing list.

  You could use copy and paste instead, or see the following article...

  http://support.Microsoft.com/kb/310270

  .. how .to add items to send it to the list.

  Tricky