drive external hard connected via usb hub powered Time Capsule guard fall...

Hello.

Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

Just seems like something somewhere that expire, causing it to drop the connection...

Thanks for your useful suggestions to fix this!

Is your TC the Gen5, model AC?

I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

What is the speaker (the box is powered)?

Quality of the envelope varies a lot... What is it??

If this is the typical brand X... Plug it into your Mac. is it reliable?

Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

I start TM. After a few minutes the backup fruitbodies.

Check in the finder, it has created the sparsebundle and works.

Can you have a USB hub between the external hard drive and time capsuls?

It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

I started a thread for a database just now... has not progressed much.

https://discussions.Apple.com/thread/5912861?TSTART=0

Tags: Wireless

Similar Questions

  • Drive external hard connected via USB hub: icons not showing on desktop

    Hi... on an iMac 2015, using a USB hub 3.0 occasionally to connect an external hard drive (which stores these things as art assets)... but the external hard drive icon does not appear on the desktop... it IS in the sidebar of Finder, though...

    But on the icon the Finder sidebar, the small icon "eject" gray is missing, and the only way to eject is to right click and select "eject" or use the eject button in the Finder toolbar... it's okay...

    But is there a way to display the icon on the desktop, so I can always remember to eject the disks attached?

    (the desktop icon shows normally when connected directly via the USB ports at the rear)

    Thank you.

    Finder-> Preferences-> general, check the appropriate boxes under "show these items on the desktop".

    [My personal choice is them having all checked]

  • Vista doesn't show that drive external hard connected by USB (USB 2.0 TO IDE)

    I formatted and partitioned Maxtor 30 GB HD and you want to use as external backup storage device. I put the jumper to "Master" and the format type is NTFS. The HD works perfectly with my old PC (Win XP) as an external drive via USB. But when I set with my new PC (Vista Home Premium), the HD appears only in "Device Manager" and not the case in ' mycomputer ' or 'disk management '. I've tried different USB ports on my new PC, but I could not be able to get it recognized by Vista yet. I searched on the internet and most said about changing the drive letters and fitness solutions in form, but my problem is that disk external drive does not appear in the "Disk management" section at all in any form. Any help in this regard will be highly appreciated.

    Hello

    1. What is the status of this drive in Device Manager? Is there an exclamation next to him?

    Check the status of this device by using the command of part of the disk. Refer to the he links below for more information and measures.
    A Description of the Diskpart command-line utility
    http://support.Microsoft.com/kb/300415
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Drive external hard (connected to the Mac mini USB) disconnect during use

    I have a 3 TB (WD green) hard drive in an external hard drive enclosure "miniStack MAX Media", connected to my Late 2012 Mac mini via USB.

    I don't know when he started to do this, but I recently noticed that it was dismantling even when she was in use; the error was:

    Disc eject does not correctly
    EJECT 3 ' TB' before you unplug or turn off.

    I replaced the USB cable and saw the same mistakes.

    I moved the HARD drive to a different box. same mistakes.

    I swapped the HARD drive to a whole new WD 4TB blue; same mistakes.

    So now I have a new drive in a new case with a new cable, and I see the same messages "Disk not ejected correctly".

    (By the way the disk utility has shown that the two discs were fine when I ran first aid.)

    This brings me to assume that the problem is with my Mac mini, which runs at El Capitan and is fully aware of the updates of the operating system.

    Recommendations on next steps to investigate and resolve this problem?

    It seems that your external draws too much power. That shows the report of your system? You have an external power supply for external drive? Have you tried to use all the USB ports on your Mac?

  • Change the drive letter when connecting via USB?

    When I plugged my DroidX (via USB) to my box "XP home", I don't have my 2 USB powered external drive enclosures. Thusly, Motohelper installed and configured itself, but took possession of the letters 'F' and 'G' driver previously used by my two external in the process.

    I need to get those back from some apps are looking for files in these places and I would rather not start reconfiguring all my apps on my XP machine.

    I looked in disk management, but don't see not all references to F or G, a frontend for the Motorola drivers for this problem.

    Someone knows a way to recover my drive letters and to reconfigure the drive letters of Motorola to my taste? (System Restore is out...)

    How to change a drive letter

    To change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

    1. Sign in as an administrator or as a member of the Administrators group.
    2. Click Start, click Control Panel, and then click performance and Maintenance.
    3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
    4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
    5. Click change.
    6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK.
    7. Click Yes when you are prompted to confirm the drive letter change.

    The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

    How to remove a drive letter

    To remove an existing drive letter on a drive, on a partition, or a volume, follow these steps:

    1. Sign in as an administrator or as a member of the Administrators group.
    2. Click Start, click Control Panel, and then click performance and Maintenance.
    3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
    4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
    5. Click Remove.
    6. Click Yes when you are prompted to confirm the deletion.

    The drive letter is removed the disk, the partition or volume that you specified.

  • Drive external HARD USB will not access the files correctly on Satellite A100-033

    I have a laptop Toshiba Satellite A100-033 (PSAANE-03J02GEN), running Windows Vista Home Basic Edition.
    I have a Western Digital passport external hard drive, which has no power source, because it pulls its power via the USB port.

    Sometimes the player works fine, but I often have huge problems to access files on the drive. Opening a folder can make Windows to hang.

    Open an audio file or a Word can do Word or audio software crash. Copy files often fails and in the process can make the Explorer Windows stop working.

    Recently I tried to copy a 33MB file from the external hard drive to my laptop, and while he did it took more than an hour. So many things can happen, none of them pleasant.

    Problems can occur if the external drive is the only device connected to a USB (apart from an external mouse, I always use), or if the external hard drive is one of a number of devices plugged into my laptop - either separately or through a USB hub (powered or unpowered).

    Anyone know what is happening and how I can make my USB external drive usable? I have two other external drives (powered by their own power source) and they work perfectly.

    Why, most of the time, do drive limp along so badly that they are virtually unusable?

    Hello

    One thing is clear; the problem is definitely related to the external HARD drive and not the laptop. It seems that this problem still occurs if the HD has been connected.

    It of really difficult to say what could be wrong with your external HARD drive
    Maybe HARD drive sectors are corrupt, and therefore you can not open folders and some files stored on the HARD drive.

    Have you tried to format the HARD drive? Check this box and try to save and re-open cases.

    In the worst case that the external HARD drive has a hardware malfunction

  • drive external hard when it is connected to the computer says hd not formatted want format you?

    drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks

    Hi keo1,

    We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
    See check your hard drive for errors

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

    Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

    Hello

    I suggest to refer to this link and follow the steps in this link and check if that helps:

    http://support.Microsoft.com/kb/943104

    It will be useful.

  • Connection drive external hard am.

    Hello world
    I wonder if it is possible to connect the drive external hard am to z3?
    In the light of others do it on the other android device. Got an otg cable, plugged my HDD but the phone is not supported it or I'm doing something wrong.

    Any help with this would be appreciated.

    Yes, you can check what file system that is used if you connect to a PC, right-click on the drive in the Solution Explorer and select Properties.

    It is possible to convert NTFS to FAT without deleting all data, but I do it without the first run a backup in case something goes wrong. And if you have files bigger than 4 GB it will be problems with these as FAT32 does not support that. exFAT supports, but I didn't know of any tool that can convert NTFS to exFAT without wiping the drive.

  • I'm trying to use a printer that connects via USB and he always tells me that it is not a driver?

    Hello

    I'm trying to use a printer that connects via USB and he always tells me that it is not a driver? I don't understand what is happening and I think it's a setting that I have on my computer. Can anyone help? Ive went on the website of the printer to download the driver and the im unable too.

    Hello

    OEM for the printer manufacturer is responsible for the proper functioning of the printer
    and their drivers. Check with the manufacturer of the printer support, their online
    documentation and drivers and ask in their forums.

    Good luck, you need to update or reinstall the latest driver.

    ================================================

    The main issue is probably the drivers, but these can help:

    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Solve printer problems (Vista)
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Solve printer problems (Vista)
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Solve printer problems (Windows 7)
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Open the printer (Windows 7) Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Find the manufacturer's Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

    Find and install printer drivers in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Satellite U300 - only the external mouse works via USB

    My touchpad has stopped working. I tried to reload the driver, reset the settings via the control panel and checked the Fn F10 button. My external mouse works via USB and I have not activated the button ' disable when the external mouse connected "(and even when the mouse is disconnected the touchpad still does not work).

    Any help would be appreciated. I don't know that I missed something very simple.

    Hey Buddy,

    > checked the button Fn F10
    It is the combination of bad for touchpad keys. You must press the combination of keys FN + F9 to toggle the touchpad.

    Check this box!

  • Satellite A200-1If - drive external HARD after a while is "unknown device".

    Hello!

    I have such a problem: I work with my external case alu Toshiba 3.5 HDD 500 GB and after awhile of copy of the files in the laptop it disappears and appears this luckily device recognized.
    Can it be caused by not enough power in the USB port?

    THX for any help or the workaround

    Hello

    Yes, this may be caused by the fact, there is not enough power provided by the USB port. first of all, note that external USB hard drives 3.5 inches are generally designed to be used with systems of office due to their higher power needs (this is also the reason that many need an external power supply of their own). my suggestion would be to buy a 2.5 inch drive external hard USB is designed to be used with laptops. Another reason that the hard drive may disappear when copying files, is that there may be a problem with the connection of the USB cable between the laptop and the external HARD drive. I suggest to check that both ends are connected properly and not put any pressure on the cables and keep them stable.

    I hope this helps you with your question

  • OfficeJet 4500 G510g: Windows 10 Driver not recognize OJ4500 via USB. does not scan

    After the upgrade to Windows 10 JO 4500 would print not scan. (From August 2015) completely uninstalled and reinstalled the latest driver. The Setup program does not recognize that the printer has been connected via USB (the button "Next" is never active). I was able to print but never able to scan.

    Launch the center of solutions results in:

    HP solutions Center can not run because your device installation is not complete.

    Today, on 20 October, I downloaded another driver updated (September 2015, 140_408.5), uninstalled all the previous HP printer software/driver and tried again. The pilot 'up-to-date' has exactly the same problem - not recognizing that I have now connected to the printer via the USB port (trying various ports on the PC) and never goes to the "following".

    I clicked the help button.

    1 said to confirm that the device is connected and powered. Click back to try again. No luck.

    2 says that "some hidden configuration commands not will be over." Click back, wait a few minutes for the installation of the unit is complete. No luck.

    3. Affirms that if the problem persists, check the troubleshooting section in the Readme on the CD-ROM. I have no CD so no luck.

    Then, I couldn't leave the Setup program except by using the Task Manager to kill the process running.

    I'm now able to print, despite the above experience.

    Since the center of Solution will not work, I tried Scan color of the façade. View of the front panel "no scan options".

    Does anyone have a solution for this?

    SOLVED.

    Downloaded HP Print and Scan doctor. Despite the fact that I had just downloaded the latest driver, the good doctor displayed:

    A later version of the software is available for this product.

    After downloading and installing, he recognized my USB printer connected and completed the installation.

    Now, I can scan.

    Panel, programs and features shows the version 14.0 rel. 6

    HP: Why East-exit 6 not on the download page, rather than to release 5 that I downloaded today?

  • drive external hard - recognized as disc 2, but no drive letter

    I try to use a 250 GB, Maxtor hard disk via USB as an external drive in a BlacX dock external. The drive appears in the disk as disk 2 Manager, but it does not appear on my computer with a drive letter c (E).

    Displaying Disk Manager, it appears as disc 2 with 233 GB free.

    How can I get it to appear in my computer as a drive letter, so I can access it as an external drive?

    When I right click on disc 2 in Disk Manager there in no option to assign or change the drive letter.

    Any help would be greatly appreciated.

    Thank you

    bwbradfield

    Until the reader is prepared/formatted it will not appear on the PC and will not have a drive letter

  • Control external synth MIDI via USB keyboard controller

    Friends,

    I'm trying to get a Novation Launchkey 25 to work as an external controller for mother-32 MOOG synthesizer.

    Software - Logic Pro 9

    USB - LaunchKey 25 Novation keyboard controller

    Interface - Focusrite Scarlett 18I6

    MacBook pro with current operating system

    Currently I have the out of the Focusrite and towards the MOOG MIDI cable. The Launchkey is connected via USB on my Mac. Logic can see the keyboard and interface, but not the MOOG. I just want to control the MOOG mother 32 with the keys. I am at a loss on how to implement the logic. Any help would be greatly appreciated.

    Thank you

    Steve

    1 MIDI OUT of the Focusrite at noon on the MOOG.

    2. create an external MIDI track with the release (in the Inspector) on the MIDI OUTPUT Focusrite. Also assign the desired MIDI (or ALL) channel. Better, the use of the channel the MOOG is set up to receive on.

    3 connect the headphones to the MOOG, to see if it is audio output. To get the audio MOOG through logic, you should run the audio Moog in the Scarlett outputs, create an Audio track, the value of channel inputs inputs use the MOOG, the value Preferences / Audio monitoring software allowed to logic. Allow recording the audio track. You can select two tracks (Audio and MIDI external) using shift/select, if necessary. Audio will come from Scarlett.

    It is another way to analyze using a plugin, get that first day.

Maybe you are looking for

  • Connection

    I turned off my phone and now its always tells me to connect to the WiFi or cell, and every time I make or he do not cease my passwords are fake when I know they are correct

  • Why Twitter have only a 4 + rating when material hardcore is available and no age verification is in place?

    Why Twitter doesn't have an estimate of the age of 4 when images adult hardcore and videos are EASILY accessible? It makes restrictions on iOS unnecessary restrictions. Also Twitter do NOT check the age, or offer options of restrictions that are effe

  • Satellite S50T-A - Bluetooth is not working properly

    Why the Bluetooth does not work in laptops Toshiba Satellite S50t-A?It sends data, but does not receive any! and says still 'not connected' to paired devices.

  • HP Pavilian 533w - Multimedia Audio Controller will not charge

    I have a HP Pavilion 533w, I can not get the multimedia Audio Controller to load. I am running Windows XP home, and this is a new installation. The error code is 28 and I visited HP website and followed all their directions without help. Can someone

  • Satellite A60 - issue CPU upgrade

    Hi there people. I have upgraded memory on old enough computer a60 laptop my gf, but want to upgrade the processor as well now that she is running the celeron 2.8.The laptop manual says I can have the following processor: Intel celeron up to 2.8 ghz