Drive external HARD USB will not access the files correctly on Satellite A100-033

Similar Questions

• My drive external hard usb does not appear after login

  Hi could someone help because I bought a disc external hard usb and when I plug it in it does not appear on my laptop at all and ive tried troubleshooting and also right-click on computer in going on the management and also clicking on disk management, but it doesn't appears not on there also could someone help please thank you

  Hello Gabriel,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the brand and model of your laptop?
  2 have you tried to connect the player to another computer?

  I appreciate your efforts to resolve the issue.

  This problem can occur for the following reasons:

  -The USB driver is maybe damaged.
  -Corrupted registry keys can be the cause of problems with the connection to your external hard drive.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• I am trying to download Adobe Acrobat 8 Professional, because the disk drive on my computer will not read the disc. I can't link to this download.

  I am trying to download Adobe Acrobat 8 Professional on my PC, because the disk drive on my computer will not read the disc. How can I associate with this download?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Internet Explorer will not access the web and my antivirus will not work. I have updated to ie 9 and ran the software programs software and spyware malware. My machine is running on vista.

  I have Norton AntiVirus by Comcast and it does not start because of a "connection problem". The only thing I could find wrong was the question would not access the web. I deleted a user account, a couple of days, but do not know if that would do anything.

  Hi IrishStew,

  You can see the article in order to analyze the logs of System File Checker.

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228

  Since Internet Explorer works fine with mode safe mode with networking, you can perform the clean boot to see if a third-party service is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

• Cannot delete from disk HARD/BIOS password, to access the BIOS on my Satellite L855 - 16 p

  Hey everybody,

  So I decided to install Ubuntu and the password I put up (via the bios hard disk) will not let me access bios. I tried to access it boot advanced, tried all start on the start buttons, but nothing happens. So basically, I want to delete this password and I can't access bios.

  I use Windows 8.1 Toshiba Satellite L855 - 16 p PSKAEE.
  ACPI BIOS Flash version 6.70
  Can you help me with this disappointment?
  Thank you in advance.

  Stand by. What do you mean with that I can't access BIOS? Want you say you can not access the BIOS in general settings or the pattern is BIOS password?

  If there is problem with password BIOS none of us can help you with this. You should contact the nearest Toshiba service provider and they can remove BIOS password for you.

• 10 elements will not open the file RAW of Nikon D7100

  I upgraded my camera to a Nikon D7100, PES 10 will not open the raw file. Y at - it a upgrade for PES 10, I've updated as much as I can. I think it is 6.4. Help

  The D7100 requires at least Camera Raw 7.4. This version is not compatible with Photoshop Elements 10. You must either upgrade your Photoshop Elements (the current version is 14) or use the DNG Converter (free from Adobe) to make copies DNG that you can use in 10 items.

• Why 5 Lightroom will not open the files of my Lumix dmc of the G7.

  I have a number of digital cameras. However I just added Panasonic DMC G7 to my kit.

  I use Lightroom 5 and it is updated but it does not open the files from this camera. Help...

  Unfortunately, your camera model is too new to be supported in LR5.

  Upgrade to LR6 or use the free DNG Converter to continue using the LR5

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Drive external hard Mac has shown in the past but does not now show in disk utility. How can I get it back?

  I'm going crazy trying to find an answer to this question! My external hard drive has shown in the past but not now shows in disk utility. My OS is X El Capitan.

  I tried to turn off my computer then unplug my external hard drive waiting for 30 seconds back on my computer and plug my hard drive with no joy.

  I hope someone can help.

  Hi willy of San Jacinto.

  I understand that your external hard drive is no longer seen by your computer. I know it's important to have a good backup location, and for that to work, I am so happy to provide assistance with this.

  Read this article on troubleshooting USB devices:

  OS X El Capitan: If a USB device does not work

  If your computer is yet to see the hard drive after following these steps, it would be interesting to test this drive on another computer if available. If you continue to have problems, I suggest contacting the manufacturer of the hard disk on a hardware failure possible.

  Thank you for using communities of Apple Support, cheers!

• Can I connect a drive external hard usb to my Sony nsx-46gti and how will it work?

  Can I use the drive hard usb to play, paused as a digital video recorder? I read of this fact. If my tv model does not support this is there a way I can change to? If you can't tell me exactly can you point me in the direction of who can?

  Hi EPK.

  Yes, you can connect external USB HDD compatible FAT to this TV and can use the functions of Play/Pause. Detailed information and functions of this feature are listed below:

  http://Helpguide.Sony.NET/InternetTV/NSX-GT1/v2/US1/04/04-02_1.html

  If my post answered your question, please mark it as "acceptable Solution".

• Drive external hard USB once that work is more recognized?

  Hi, I used a Samsung S1 mini external hard drive very well on my laptop Windows Vista Home Basic & now for some reaosn it cannot be recognized? An error msg appears informing the unit is defective, any ideas please?

  Thank you

  Lee

  Hi LeeBrearey,

  You did changes to the computer before the broadcast took place?

  Method 1
  I suggest you to run the fixit from the following link:
  
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2
  Search for any error code in Device Manager

  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  If the device is listed, try the steps from the following link:
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  

• Windows XP will not read the files on the second drive...

  After reinstalling Windows XP on a new drive C:... How can I get Windows XP... to read the files on a second drive F:...?

  You will need to take possession first. See article KB- How to appropriating a file or a folder in Windows XP.

• New device of U2 vCenter 5.5 will not access the network

  Hello

  I just installed a new 5.5 ESXi host and on that I deployed the OVF of the original version of vCenter 5.5.  It worked, but I wanted to try the new vCenter 5.5 U2.  So, I deleted the old device of my ESXi host and deployed the OVF of Unit 5.5U2 vCenter.

  As a first step, this unit could not get a DHCP address (was the old server to the device).  I connected and run/opt/vmware/share/vami/vami_config_net and set up my gateway, IP address, host name and the DNS servers.  After you apply the configuration, I was unable to ping the new vCenter device.  A reboot didn't help.  In addition, the shell, I am unable to ping my local gateway.

  Where to resume the troubleshooting?  I did other changes to the device when it was deployed.

  Something really strange is passed to the physical card on the ESXi host - I noticed that my test Server 2003 guest was not either the ping requests.  Restart the host did not help.

  On vSwitch0, I have changed the NIC to 1000/full, had a mistake, changed to automatic, and then things trading as magically started working.

• I CAN ACCESS THE PAGE YAHOO ONLINE AND POGO GAMES, BUT IT WILL NOT ACCESS THE GAMES ONLINE

  I CAN'T ACESS THE YAHOO AND POGO PAGE OF ONLINE GAME, BUT MY COMPUTER WONT LOAD GAMES

  Hello Debra.

  Please come back with exactly the model of your computer and to answer some questions:

  The is the problem with all browsers? If not, mention the name of the browser.

  What is the operating system that is currently installed on your computer?

  Look for the model # here: http://esupport.sony.com/US/p/support-info.pl?info_id=264