drive external hard when it is connected to the computer says hd not formatted want format you?

Similar Questions

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

• My lg800g phone shows connected to the computer but is not assigned a drive letter

  My lg800g phone shows connected to the computer but is not assigned a drive letter

  Hello

  You can manually assign the letter.

  Check out the link and check if that helps.

  Change, add, or remove a drive letter

  If you have any questions on Windows, feel free to let us know. We are happy to be of assistance.

• Sansa E280 going to update the database when it is connected to the computer

  Hello

  Just at the moment where I was getting things straightened on my drive and everything was working fine, I plugged my E280 on my computer and it says "Refresh database" on the player and my computer does not see the E280.

  I've been looking around on the forum, and there are so many different options to try (of: delete the SYSTEM folder, which I was told not; to turn off the drive and engaging the hold button and the button to rewind when connecting to the computer, etc., which I tried ~ nothing; take off Firmware and put one on; do something in Recovery Mode) , which I have no idea how do; etc.).  Sorry, but I hope you get my point... What do I do?

  Thanks for any help once more.

  Thank you clu31355.  I tried the very first thing that you said ' put in operation and allow it to update the database (if desired) before you connect. "and voila - it worked.

  These Sansas seem to be quite ticklish - who knows what will happen?

• Help! The files do not appear on the rocket when it is connected to the computer

  I brought all my library Windows Media WMA and mp3s on my rocket using auto when I got it. For some reason, the "rocket" do not place files in the music folder or elsewhere, that I can find them when it is connected to my computer. The music folder is empty. The files appear on my rocket only when it is disconnected! It's a pain to remove things quickly. I really want to sort through hundreds of songs and remove them manually one at a time to make room for the new. Can someone please?

  I'm about to use my magical powers of intuition here.

  Look in settings/USB Mode. Auto-Detect, right? (Please limit your applause.)

  That's your problem. It detects a different USB mode for each computer.

  There are two modes USB, MSC and MTP, modified through parameters. There are also automatic detection, which goes to the PSG first, then of MSC if there is no player Windows Media on the computer.

  A computer can see a way or the other: just just the MTP or MSC.  The "rocket" sees all.

  DPW works with Windows Media Player. This is prbably that you have configured on your PC.

  MSC works as a generic flash/thumb/disc player. This is how you connect to the Mac.

  Solution: Connect to the PC and move the files of the "rocket" to the PC.  Change MSC mode and put them on the "rocket" in MSC mode.  When you connect to the Mac that they will be there. And when you connect to the computer, they will be there as well - but now you will see them in MSC mode.

• IPad no charging current when it is connected to the computer, said

  Original title: why ipad indicates no current when charging connectd to computer

  My iPad needs to be reloaded, but when connected to the PC with the cable apple, says iPad not charging. Someone knows why?

  This is quite normal.  Apple has designed the iPad to the only charges when it is connected to a charger taken approved or to a USB port of high amperage only found on Apple iMac and MacBook products.  If you connect it to a PC port or non - Apple USB it will not load.

• When it is connected to the television sound is not good enough

  Hi all

  I bought a Satellite and try to connect to the TV by before taking. The sound is not good enough.
  Who can get better?

  What do you mean not enough? The volume is too low or what?
  Go to sound and audio devices in the control panel and check all orders if they are set at the higher level.

• Profile of blackBerry Smartphones Sound changes when loading or connected to the computer

  I immediately noticed on my BB Curve when it is plugged into the charger or hooked up to my computer, which changes the sound profile. It's frustrating because I don't know what is happening because this isn't my normal sound profile.

  Is this a bug? If anyone else has noticed this?

  Is there a setting somewhere that I missed that causes this happens on my phone? It's my third BB and the first time it happened to me.

  Thanks in advance for your answers.

  I was going to suggest to try first, maybe they have an option to fix it properly but which could stop him doing what's done

• Impossible to recognize the second disk hard when it is connected to the motherboard.

  OK via a USB adapter...

  W - XP pro. SATA drives,
  They do not work at the same time...
  Same problem with the W - 7 computer...
  Can I have 2 hard drives that do not recognize the motherboards. ??

  Hello

  • If it works well before?
  • What were the changes made before the show?

  You can check this link:

  http://support.Microsoft.com/kb/310575

• Unbale to connect to the computer, passowrd is not accepted

  My laptop does not accept my password for three years at the start of Windows 7 Starter.

  I don't have lock capitals or put on the market numbers.

  I have been unable to implement the advice given by Stuart W J on July 14, 2010 a user earlier while pressing F8 while booting.  This made no difference, I always request password screen and does not not the password.

  And in another ad, J W Stuart offered other tips that get involved insofar as the screen with the Start button, but I can't get beyond the the password request.

  Any help will be appreciated with gratitude!

  Since you have no data worth saving on the old PC, the simplest solution would be to perform a destructive factory restore. You will find detailed instructions on the web page of the manufacturer.

  If this is not acceptable, then you must have a CD repair system. Ask a friend to burn you through the control panel / backup and restore. The friend machine must have the same width of bus as yours (32 or 64 bit). You must then set the boot device main of the BIOS on the CD player. Please post here when you've managed to start the machine Mode of repair with this CD.

• Connection drive external hard am.

  Hello world
  I wonder if it is possible to connect the drive external hard am to z3?
  In the light of others do it on the other android device. Got an otg cable, plugged my HDD but the phone is not supported it or I'm doing something wrong.

  Any help with this would be appreciated.

  Yes, you can check what file system that is used if you connect to a PC, right-click on the drive in the Solution Explorer and select Properties.

  It is possible to convert NTFS to FAT without deleting all data, but I do it without the first run a backup in case something goes wrong. And if you have files bigger than 4 GB it will be problems with these as FAT32 does not support that. exFAT supports, but I didn't know of any tool that can convert NTFS to exFAT without wiping the drive.

• When I go to download items, it says page not found

  I recorded my copies of items 14, but when I go to download, the site says page not found...

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Satellite A200-1If - drive external HARD after a while is "unknown device".

  Hello!

  I have such a problem: I work with my external case alu Toshiba 3.5 HDD 500 GB and after awhile of copy of the files in the laptop it disappears and appears this luckily device recognized.
  Can it be caused by not enough power in the USB port?

  THX for any help or the workaround

  Hello

  Yes, this may be caused by the fact, there is not enough power provided by the USB port. first of all, note that external USB hard drives 3.5 inches are generally designed to be used with systems of office due to their higher power needs (this is also the reason that many need an external power supply of their own). my suggestion would be to buy a 2.5 inch drive external hard USB is designed to be used with laptops. Another reason that the hard drive may disappear when copying files, is that there may be a problem with the connection of the USB cable between the laptop and the external HARD drive. I suggest to check that both ends are connected properly and not put any pressure on the cables and keep them stable.

  I hope this helps you with your question

• Drive external HARD encrypted in ExFat?

  Hello

  I have a new drive external HARD I need to use on a Mac and a PC. I need to access the same files (data analytics), so I don't want to make 2 partitions and have duplicate files. What I've read, it seems that ExFat is the best option for this (they are large files, so that the FAT will not work). My work, however, requires external hard drives to encrypt. When I tried to put it on my MacBook Pro (El Capitan), however, I received an error.

  My question is this: is there a way to meet all three of these criteria?

  (1) disk encrypted

  (2) read/write on a mac

  (3) read/write, the same files on a PC

  I have a separate HARD disk for Time Machine, I use an airport. This disc will have to travel with me.

  Thanks in advance!

  If you were able to encrypt it using the built-in OS x software, Windows would not be able to decipher. If you use a Windows build-in encryption software, OS X would not be able to decipher.

  You have to find a 3rd party package that works on BOTH OS X and Windows, which can encrypt and decrypt on both platforms.

  In the past, I would have done TruCrypt, however, he was abandoned by unknown original authors, but there have been a few replacements based on the original source of TruCrypt.  Try googling 'TruCrypt Alternatives' and you might find something where they support the OS X and Windows.

  Otherwise, you will need to find another cross platform encryption package.

• Directory of drive external hard has been changed

  My drive hard external has been labeled the E: drive and now when I plug his label the F: drive. My library, internet browser, network, etc. are synchronized to the files in my external drive to which they cannot access more because it renamed Windows for some reason any code of practice. If I change things to be synchronized with the new drive F: then it causes other problems that he will not save the info synchronized as it requires me to enter new info. Is there a way to get windows to make my external backup as the E: drive (PS my Sandisk Cruiser USB drive to carry the F: drive is now listing himself as the G: drive, causing similar problems)

  Info: Windows Version is Windows 7 premium
  Laptop is a Dell
  External hard drive is a Seagate FreeAgent Go

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest you follow the methods provided and later a update on the State of the question.

  Change, add, or remove a drive letter: http://windows.microsoft.com/en-in/windows7/change-add-or-remove-a-drive-letter

  Note: Some programs make reference to specific drive letters. If you change a drive letter, it could be that these programs do not work correctly.

  For all windows related issues please feel free to contact us or let us know and we will be happy to help you.