drive hard beep and does not

Similar Questions

• Presario V2010US or V2000 - keyboard beeps and does not work?

  Hey, hope someone can help...

  The keypad beeps every time a key is pressed and it is not hit. All the keys of the beeps including keys mute and volume. External keyboard does the same thing.

  I pulled the main battery.

  I pulled the battery from the motherboard.

  I did a hard reset.

  An external USB keyboard reacts in the same way with just the beeps and no entry.

  I ripped the keyboard and ensured it is plugged.

  The mouse pad works fine.

  Anyone? Please, I beg you! > thank you!

  Hello

  If you use Windows XP, you can accidentally activated filter keys.  To put this off just hold the two shift keys for a few seconds and the keyboard should work normally.

  I hope this helps.

  Best wishes

  DP - K

• DVD Drive Power Off and does not restart

  DVD Multi hunt in my ThinkPad W530 assignments after a while to save battery. But when I go into my computer, make a straight on the drive and click to turn on, nothing happens. The Player opens and allows me to put the disc in it, but no program on my computer does not detect the drive. Not Windows Explorer, not any program, not Windows Media Player to DVD burning. When I disconnect, then reconnect, the drive simply disappears from the hard disk.

  So far, the only way that I was able to get the DVD drive working again is by restarting the computer.

  What can I do?

  ThinkPad W530

  NVIDIA Quadro K1000M

  64-bit Windows 8

  Actually the above did not work. I uninstalled Cyberlink PowerDVD and DVD player started working as it was supposed to.

• Drive hard internal suddenly does not detect.

  I have PC HCL, I have a hard drive 350GB WD blue, suddenly he is hanged and claimed restart. I tried to start it, but during the installation of time, he does not watch partition and it shows the total space (i.e., 300 + GB). then I tried to partition, but it does not work. After that I tried, this time, it is not all display drive and says there is no disc to install windows. How can I detect the hard drive and how to recover my data in the hard disk and how can use it again to install the inside windows. Please help me to do all this. at least suggest me to get my data to retrieve.

  Hi @PrincipalGovt. ITI!

  I'm sorry to hear what happened with the HARD drive, I know that this could be a very unpleasant experience.

  At this stage, given that the boot drive is still not detected, it will be better to try the troubleshooting steps basis in such situations.

  1. use another SATA cable, as the problem could be linked to this component.
  2. connect the hard drive to another motherboard SATA port.
  3. in the event that none of the above worked, then connect the HARD drive to another PC and see if it will be recognized.

  If all goes well, it will appear in the other computer and when he does then backup your most important data on another location. It is possible that the transfer rate may be slow, but nonetheless wait for the process to complete if your information could be sure. Once it is successfully removed, run a diagnostic test on the HARD drive with the manufacturer Data Lifeguard DIagnostics tool and see what results. You can download here:

  http://products.wdc.com/support/kb.ashx?ID=BKO7r8

  In the case where you've run these tests until you can follow the steps described in this article:

  http://products.wdc.com/support/kb.ashx?ID=noYuE0

  However, in case the HARD disk is not detected at all, then it will be preferable to a data recovery specialist and see if he or she will be able to help you recover your data back. There are a few partners listed on the official site data recovery, so you can take a look at this link if you want to:

  http://products.wdc.com/support/kb.ashx?ID=HpehiA

  Hope this helps and let me know how it went.

• My drive HARD Toshiba JAPANESE does not once again, so I replaced it. But I can not SAVE my Windows 7 more.

  Hi all

  Title says it all really.

  For four days I tried to activate my Windows 7 (currently in English) on my laptop Japanese (pre-installed was Japanese originally [but I didn't score more and have a new HARD drive), and I get the middle finger, all the time when I try to save the English version of the same Windows Home Premium with my laptop on the same laptop code.

  I have tried thousands of web pages a Japanese Windows x 64 Windows 7 Home Premium, but can't find one (in which case the code only to the Japanese laptop in/THROUGH Japanese).

  Thus,.

  Anyone KNOW WHERE I CAN DOWNLOAD a COPY of the JAPANESE OF WINDOWS 7 HOME PREMIUM edition on. ISO?

  The laptop 3D stereoscopic i7 is a little more than 3 years. And otherwise very good.

  What can I do?

  Smash it and put the video on youtube as an advertisement for Microsoft and Toshiba, Toshiba like repair bill $350 to install a hard drive with the Dynabook Windows 7 above.

  OR

  Should I go the nightmare that is Windows 8.1 and stump up more of money?

  Have you tried phone activation?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• power supply beeps and does not charge since located in a country where the average temperature of 38 ° c

  Since I started so that connected beep 3 months in Nicaragua (this voltage converter) my Compaq Presario CQ61 Notebook power and charge more.

  When you're disconnected beeps constantly.

  Is it possible that the problem is solved when the power supply cools at an ideal temperature or you hear a beep that it will be necessary to get a new charger?

  Thanks for your replies!

  The temperature is unlikely to be the cause of the problem.

  The power adapter (sometimes called power brick) is designed to operate in a wide range of voltages (from 100-120 Volts AC) or 220 - 240 Volts AC) the only thing that differs is the type of power connector used to connect the power adapter to a wall outlet of the home or office.

  Remove the converter and use the correct power cord or travel adapter Nicaraugua. Your adapter will not explode or be damaged. Converter is likely to be the issue.

  You need a North American power cord to the adapter. You should be able to buy one on site or just go into a travel store and buy a travel adapter set. That's what I have for when I travel to the United States for business or travel.  I bought my Brookstone set for about $30.00 USD.

• "Computer does not allocate a drive designation letter and is not displayed when windows Explorer opens to USB external drive.

  Original title: problem connecting to USB external drive

  I tried to install a 30 GB drive to Fireball over using a disk enclosure external hard Octigen SATA-USB 2.0 on an Acer Aspire T671 under Vista Premium computer. The system recorded new material, installs drivers and registers an entry on the massive safe removal as a "USB storage device" icon However, the computer does not allocate a drive designation letter and does not show the opening of windows Explorer.

  The hard disk is configured as a master, as described in the user manual.

  How can I make the computer recognize the drive and assign a drive letter?

  Thank you for the help

  Frank Hughes

  Hi FAH300,

  If you are not able to format the drive, there may be a hardware problem.

  I suggest formatting the disk using the instructions linked by wb2001.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support

• Dell Vostro 430 sometimes breaks down and does not find the hard drive in the bios

  So I have this old - ish Dell Vostro 430, intel cpu, windows 7 hard disk sata 250 GB, 4 GB of ram.

  Update BIOS to the latest version 2.4.0

  In certain exceptional circumstances, this PC sometimes crashes in windows, it is restarted, and then when he comes back it does not find the hard drive as a gift. He is not seen in the bios and does not start.

  To fix, I have to unplug the power cable, wait a few seconds, plug in, reboot the computer and it starts normally, load windows and everything.

  So far, I have tried to paginate on another hard disk, reinstall the Windows operating system from scratch, and same thing happens from time to time.

  It is difficult to find the cause of the problem, because this happens very rarely.

  Sometimes, when the pc is turned on for the first time in the morning, the hard drive is not found by the bios and we reappear at the same trick (disconnect the power cable) to take him back.

  When it crashes when using inside Windows, it seems that the reason is the computer can't find the hard drive.

  Such computer is out of warranty.

  It would be nice to just throw this computer because it is still fine for the work it has to do, + I have Windows and Office OEM license on it, as well as many other software that I have to reinstall etc.etc.

  No idea what I could troubleshoot?

  Maybe change the motherboard? How can I buy a new motherboard for an out of warranty Dell?

  While possibly keeping all the OEM licenses (Windows 7 and Office 2007).

  Desu

  .. .once in a while...

  That will make hard to resolve this situation.

  • Have you tried to replace the battery in the motherboard, if nothing else than to exclude it? CR2032, 3-volt lithium-ion, ~ $2 at discount stores. Do not forget to open the BIOS Setup and copy down all current settings first because remove battery BIOS resets the default values, which is maybe not correct for your specific system.
  • Have you tried another SATA data cable, or reinstall the existing at both ends?
  • Have you reinstall RAM and PCI card in their slots?
  • Have you used canned air to blow out the dust?
  • Maybe a power supply problem... ? If insufficient voltage, he could not start the HARD drive quite fast at startup, or quick enough after your option settings to be able to turn the HARD drive off when it is not accessed, what may cause this error message 'not found '.
  • If you use a power strip or surge protector, have you deleted and the PC connected directly to a wall jack?

  If it is a motherboard defective and you replace it with another jury of Vostro 430, you shouldn't have any problems with Windows or Office licenses. Assuming you are using Windows Dell reinstall for exact same version of Windows drive that was installed at the factory, it should not even ask the product key, if you must reinstall Windows on the HARD drive. But even if she asks, there should be a sticker somewhere on the PC with your unique product key so you can enter if the installer made the request.

  and make sure you have the Office product key too...

• Bought the new computer windows 10, itunes has changed location of support for external hard drive. The music does not appear in itunes.

  BOUGHT NEW COMPUTER WINDOWS 10, CHANGED ITUNES MEDIA LOCATION FOR EXTERNAL HARD DRIVE. THE MUSIC DOES NOT APPEAR ON ITUNES.

  Changing the iTunes media folder location setting affects only where new additions to your library will be stored.  To use a disk external drive to store your library complete (and assuming that you have access to the original data of the library on an old computer) you must copy the iTunes folder, by default in C:\Users\username\Music, on the external drive - structure library and its records should be like this:

  

  The hold button SHIFT DOWN when you start iTunes and when you see this message:

  

  Click choose a library... then find and select the iTunes Library.itl in iTunes on your external drive folder.

  For more information, see user turingtest2 on make a library of portable split.  You must also acquire a 2nd external drive and allows create and maintain a backup your library.

• Vista gives the message "there is no more available end point" and does not allow me to share a folder on an external drive. Can you help me?

  Vista gives the message "there is no more available end point" and does not allow me to share a folder on an external drive.  Can you help me?

  Hello

  Thanks for posting in the Microsoft Community.

  I don't know it must be frustrating!

  Let us try these steps and see if that fixes the problem:

  (a) press Windows + R keys to open search Run

  (b) type regedit , and then click ok

  go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  c) on the right, click it, click permissions

  (d) click on ADD and type everyone and click ok

  (e) now click on all

  (f) below, you have permissions for users, select full control and click ok

  g keys) press Windows + R to open Run Search

  (h) type services.msc , and then click ok

  (i) double-click base filtering engine service.

  (j) Make sure that the service status is started and the startup type is automatic

  (k) the procedure for the windows firewall service

  (l) click on apply and Ok.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information:

  Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Hope the helps of information. We know if you need help. We will be happy to help you.

• I need to install a driver on my computer. When it downloads it automatically is to open with excel and does not demand for correct installation. Any suggestions?

  I need to install a driver on my computer. When it downloads it automatically is to open with excel and does not demand for correct installation. Any suggestions?

  Hello

  1. for which device you are trying to install the drivers?
  2 are you able to install or run any .exe on the computer file?

  Try to run the fix to the article below and check if this help.
  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505

• I upgraded my Mac and does not contain a disk drive. I have creative suite 5 on my old computer and I want to put it on my new computer. How can I do this?

  I upgraded my Mac and does not contain a disk drive. I have creative cloud 5 on my old computer and I want to put it on my new computer. How can I do this?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• How can I load my photoshop CS6 cd to a new Macbook that has no cd slot and does not support the cd drive external mac.

  How can I load photoshop CS6 on a new macbook, which doesn't have a cd slot and does not support the cd drive external mac? I have the original cd of the program.

  Jake

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• My iMac is flashing at me and does not start!

  I turn on the iMac and it starts to load but gets half way then flashes to black screen and stops to load and crashes with a router? as if taken between the opening and closing? Picture attached

  Probably a failed HD Try booting into the recovery (command-R) to the boot partition. Open utility disk - First aid, then run First aid on the hard drive. If this does not work, then take the local computer to your Apple Store or the authorized Apple service provider to be repaired.