Drive hard dead - new drive installed no operating system - XP key for that computer is portable hard disk newly installed?

Similar Questions

• is a store must give you the drive of an operating system if you buy a computer of prestressing

  When you buy a computer with an operating system of microsoft so you receive the disk that was used

  Hello

  computer manufacturers have a responsibility to provide you with the means to reinstall vista

  It is perhaps through a vista dvd or a recovery partition

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought it and also make the recovery disks of

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Image vs cloning on the new HARD drive with an operating system already installed.

  First of all, I'm NOT tech savvy.  I apologize in advance.

  After several warnings error that my hard drive was in danger of failing, I was finally able to install a new HARD drive.  Windows has had some difficulty in installing Windows 7 to new HARD drive, but I finally found a solution.  So here's my current situation.

  I have the main drive (old) (C:\) which has Windows 7 and all my data on it (it is a Seagate 1 TB HARD drive that came installed on my Dell Studio XPS 8100).  I installed a new WD Black 1 TB HARD drive and was finally able to get Windows to download on it (it reads now like two distinct? score?) E:\ and F:\) see photo.

  

  Now, my question is this...

  I want to save all my data from my old HDD and put it on my new HARD drive.  One that I have this, I would like to remove the old Windows 7 HDD and use it as "extra" space

  Make a clone of the old HARD drive to the new since I have already installed the new Windows 7 HARD disk?

  Please advise and please keep in mind that I might say things correctly and I can't understand though if the answers are on my level.  I appreciate any help!

  OK, so here is what I would do to try to avoid problems of compatibility or driver, as far as I can:
  -Turn off your system completely and unplug from the power outlet wall
  -Disconnect the old drive in your system (SATA and power cables)
  -Place the new WD Black on the main port SATA (should be labeled SATA0)
  -Turn on your system and put your OS drive you can do a completely new installation of the operating system.
  S ' ensure that you have updated all the drivers and the operating system after the installation
  -Turn off your system and plug your old drive
  -Turn on the system in the BIOS and make sure the WD Black has the priority starting on the old HDD
  -Boot into the operating system and copy all data from the start of your old disk partition that you want to keep for the WD Black
  -Go to disk management and delete the old boot partitions and the old drive system
  -The old HDD should be your secondary drive now and you can freely move files between the two disks
  N ' have in mind that due to the new copy of the OS, you must reinstall all the games and programs in order to operate because of the new system registry

  This should put you on the safe side and prevent any compatibility issue or driver which is possible during a clone or restore procedure. :)

  Captain_WD.

• How to format my hard drive as my operating system running IM?

  How to format my hard drive as my operating system running IM? I tried many ways must my computer tells me I have to stop all programs that I have running. play help as soon as possible!

  Some PC contains a hidden hard disk restore partition. If yours is one of them, this is how you return your PC to its original state.

  What is the brand and model of your PC?

  Yet, this is a pretty drastic step. There is more easy and faster to improve performance. If you do not want to give it a shot, let us know. And also tell us the specifications of your PC, type of XP, SP, etc.

  Also, you might find follows her beneficial:

  Here are the usual causes of slow:

  1. malware (malware). You need to rule out first! This page has excellent information:

  http://Web.archive.org/Web/20080610163247/http :// www.elephantboycomputers.com/page2.html#Removing_Malware

  2. some programs aimed at combating malware (for example, Norton and McAfee). Ironically, they can slow things down because they use simply much too many resources. Sometimes they cause conflicts with other programs. And their default mode is to scan your entire hard drive whenever you start. Fortunately, there are other programs of anti-malware software available that use much less resources (p. ex., NOD32, Avast and Avira).

  3. too much of certain types of programs still running in background - with or without your consent. (Then again, a lot of programs running in the background of the consequences trivial.)

  To determine each program and process, you are running, use the task (Ctrl + Alt + Delete) Manager and click the processes tab. You should be able to sort by CPU usage or memory usage for a good ideas that are resource/memory hogs. You must write the names of all the processes for future detective work (or take a snapshot and print it).

  Use these sites to determine what these programs are, and learn how configure them to not always run when starting:

  http://www.PACS-portal.co.UK/startup_content.php#THE_PROGRAMS
  http://www.bleepingcomputer.com/startups/
  http://www.AnswersThatWork.com/Tasklist_pages/Tasklist.htm

  Sometimes, it is recommended to use msconfig to configure programs to run at startup. A better, more thorough program is Autoruns:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  But before that, you must use the settings preference of the program in question. Otherwise, for some programs, they will return to the list of startup anyway!

  If you do not want to use msconfig, it can be accessed in this way:

  Start | Run | Type "msconfig" (without the quotes). Enter (or OK)

  4. not enough RAM, causing the PC too rely on the pagefile. A quick way to determine if what is happening is to open (Ctrl + Alt + Delete) Task Manager, and then click the performance tab. Then the three values under Commit Charge (k) Note: in the lower left corner: Total, limit and peak.

  The Total number represents the amount of memory you are using right now. The vertex figure represents the maximum amount of memory you made since the last boot. If these figures are lower than the value of the amount of physical memory (K), then you probably have lots of RAM. In case you want to study it more, you can run the Page queue Monitor for Windows XP:

  http://www.dougknox.com/XP/utils/xp_pagefilemon.htm

  5. you can also verify that the access mode of your hard drive has not changed from DMA to PIO:

  http://www.technize.com/2007/08/02/is-your-hard-disk-CDDVD-drives-too-slow-while-copying/

  and

  http://winhlp.com/node/10

• Cannot convert a computer unalloacted on a new space, dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  Need additional details as
  Is it a laptop or a pc?
  Have you coveted your dynamic disk basic disk?
  What the structure of partition on your computer?

  recover with these details...

• My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  Just out of curiosity, why all these steps? Why not simply do step 9?

  1. #9 step alone can not have solved the behaviour & we wanted to be certain that no "leftovers" Norton formed the scr3wing things.

  2. I wanted to do some (possible) that your computer is not infected.

  Welcome & thank you for your comments. Mark one or more of my posts as RESPONSE will officially close your thread.

• I restored a file on a hard disk newly installed using system MS Backup tool and now it is "read only".

  original title: "read only".

  I restored a file on a hard disk newly installed using system MS Backup tool and now it is "read only".  Anyone has a solution.  I use XP Professional sp3.  Thank you.

  Right click on the file > properties > uncheck Read only > apply > OK.

• "Don't use this CD to reinstall the operating system on Dell count" that I had in 2004 and have more... what I want to know I can install it on a different computer now and it would be legal?

  Original title: Original Windows XP cd.

  I have an original cd of Windows XP Home Edition with the product key for it and want to use it... but when I look at the disk, according to me, he said: "Don't use this CD to reinstall the operating system on Dell count" that I had in 2004 and have more... what I want to know I can install it on a different computer now and it would be legal?

  Because Dell SLP, the restriction of similar model is not important. All that matters is the EULA and the fact that the two computers are Dells.

• Hello. You will need to update Mac OS El Capitan. Currently have v.8 CS Photoshop and Lightroom 2 v.2.4. In order just to work with the new operating system, please inform for updating both.

  Currently have v.8 CS Photoshop and Lightroom 2 v.2.4. In order just to work with the new operating system, please inform for updating both.

  Hi R0w1% 40nd,

  Adobe Photoshop CS v.8 and Lightroom 2 v.2.4. are very old software and the operating system you are using is the most recent, so there may be compatibility issues that adobe has not tested these applications on newer operating systems.

  The installer for Adobe Photoshop CS v.8 and Lightroom 2 v.2.4. are no longer available.

  You can see the creative Cloud, creative cloud and rates membership plans | Adobe Creative Cloud

• I'm going to buy a new laptop, what windows operating system should I buy?

  I'm going to buy a new laptop, what windows operating system should I buy?

  No one can tell you that, until you tell us what you want to use the machine for. A laptop to read PDF files, is different from one for the use of Photoshop or After Effects. Indeed, some might tell you that a laptop is not suitable for After Effects. Let us cast the additional question: do you plan to upgrade to Windows 8? Which could also affect the recommendations.

• Error loading operating system after shutting down the computer because of the high operating temperature

  I decided to re - install Windows XP Pro x 86 on my wife's computer. So I went into the BIOS to make sure that the CD/DVD drive has been configured to start first, and then I inserted the DVD and then restarted the computer.

  Now, the XP disc started normally. I installed XP to the point where I deleted all previous partitions and then created a new. Windows then displays the warning that the computer would not be able to boot up to what XP finished installing. I guess that's because start-up files have been deleted when I deleted all previous partitions during the installation.

  Right after I clicked on enter the warning message, the computer shuts down. No! So, I try to re-boot, in the hope of all simply continue with installing XP, but instead, the computer will display a message indicating that the computer has been stopped because of the high operating temperature. I then go ahead and get a message saying: "Error loading operating system."

  No matter what I do, I can't go any further. I can't get into BIOS or anything. If I try the F10 key (or whatever the keys are), I get a beep. It does not properly respond to my entries.

  I don't think that the high temperature operation destroyed all components. The computer stopped several times in the past. Furthermore, it would not be part of integrated security if Microsoft enabled the computer reach a destructive temperature before stopping. I think that the problem occurred during installation was interrupted just after that previous partitions have been deleted.

  BT, I don't know what to do now. Loooking for suggestions.

  Hi Diadem1981,

  You can follow this link completely & check if the problem persists.

  Error message "Error loading operating system" when you restart your computer during installation

  
  Reference: How to install or upgrade to Windows XP

  Hope the helps of information.

  Please post back and we do know.

• Sony Vaio suddenly do not recognize the operating system information (sometimes ask my computer to claim it is not authentic) after owning nearly 2 years

  I have had my Sony Vaio from January 2011 and I bought from Best Buy with Windows 7 pre-installed. I had no problems with the operating system being true til this summer when my computer wrong not dated and crashed my anti-virus software (screen was blue and the system had a difficult time in commissioning. After much patience and research, I fixed my computer and removed the faulty software. However, sometimes my computer does not recognize my product ID of Windows 7. When I start first my computer, the information is not available and that my computer updates, it will not update as it does not find the correct information. With this, my computer started to warn my that I am victim of counterfeit software. I have no idea where all this comes from and why is - it now say my software may be counterfeit? In the last year and a half, I never had this problem. Also, after a few minutes, my computer cannot find the operating system information and says that it is authentic; which leaves me more confused than ever. Gah. What is happening and what I can do to fix this? (I own the software disc, I got when I bought the computer, but I do not currently have access to it).

  I suggest you backup and do a reinstall.

  You should consult the documentation supplied with your Sony's Vaio computer on how to reinstall Windows 7. Usually this requires that you start in a recovery environment.

  Please see this article on how to reinstall Windows 7 on a Sony Vaio

  http://eSupport.Sony.com/us/Perl/support-info.pl?template_id=1&info_id=507#driver

• My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

  My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

  Hello

  Check if the hard disk needs repair.

  Open the disk utility, located app in HD > Applications > utilities

  Select Macintosh HD on the left then click the first aid tab, and then click Run.

• What operating system I use for iPhone 4?

  What operating system I use for iPhone 4? It will work with OS 9?

  7.1.2 No. is as high as possible.

• Can we synchronize permission selected with the settings of operating system Notifications BB10 for our Application.

  Steps to follow:
  BB10 device--> settings--> Notifications--> Applications--> [name of your application]--> all alerts [Toggle button]

  I have an obligation to check whether or not 'All alerts' is allowed through settings when the application is running. To check if we can synchronize permission selected with the settings of operating system Notifications BB10 for my application. How to get javascript code if alerts permission is on / off, while the application is running.

  I tried adding the blackberry.system function and tried to hasPermission (blackberry.push) also, I can't determine if permission is allow / prohibit... Please suggest how to get that.

  I don't see a WebWorks API for this. If I expected to be anywhere, it's here:
  https://developer.BlackBerry.com/HTML5/APIs/beta/BlackBerry.notification.html#jbo1385148829097

  But it seems that this API has not been fully implemented; It may be useful to connect a developer Issue Tracker JIRA to get this feature added.

  At the same time, there is this API of Cascades that looks like what you're looking for:
  https://developer.BlackBerry.com/native/reference/Cascades/bb__platform__notificationapplicationsett...

  Write an extension for this feature should allow you to access this feature:
  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/template

  At the same time, a colleague is currently working on an extension that should open many features of Qt, and I think that the API above should be accessible through this extension. He must be released over the next week or two, so you can wait for that as well.

  EDIT: On this last point, see this extension which provides a mechanism for attaching in the majority of the Qt APIs.

  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/QtBridge