drive hard not Windows XP Pro SP3
What size hard disk Windows XP Pro SP3 supports the promary score?
What size hard disk Windows XP Pro SP3 supports the promary score?
For XP 32-bit:
The maximum size of the partition (disc) is a function of the operating system version. The original version of Windows Server 2003 and Windows XP have a limit of 2 TB per physical disk, including all partitions.
I installed Norton 360 offred via internet was last updated. It immediately launched all applications previously disabled at STARTUP in msconfig. And shortly after he started to gives me the blue screen "to the death". This done in two days, and I was desperately trying to solve the problem by turning off almost all applications critical to running Windows XP Pro SP3, Norton and Office 2007 Home and student. I even went and tried to edit the Boot.ini file in startup and recovery under the Advanced tab in the workstation properties. Now all I get is an error message Windows cannot start because the hal.dll file is missing or damaged. I replaced it by copying a modified version of the boot sequence, while the hard drive of my laptop was enslaved to my desktp PC, but nothing helped. I can't even the Recovery Console to start on my laptop. I need HELP, please.
These profile errors are usually caused by one of the following:
1-profile corruption. The user profile is damaged and that Windows cannot load. To resolve this issue, create a new user profile and move your files to the new profile. See here for more information:
2 drives or corruption of the file system. Run chkdks /f on the volume C:. Please note that there is ALWAYS a risk of data loss when chkdsk is run on a volume, ideally, you should have a backup of your files before running chkdsk.
3 - virus or malware activity. Some of these parasites can revoke your permissions on the folder of your profile, check the permissions on "C:\Documents and Settings\Andre" and make sure you have a full control on the folder. Check this box until you try #1 or 2 above.
Some of these parasites can also revoke your permissions in key areas of the registry and create real Dany on the machine that can prevent you to run some of your software. Use Regedit to load your old profile hive (NTUSER. (DAT) in your profile folder (C:\Documents and Settings\Andre\NTUSER. (DAT) and make sure you have full control over the key. In the advanced security settings to ensure that the child objects are inherit permissions from the parent and put a check mark on "replace entries permissions for all child objects...". "Click on apply and OK your way out. See here for easy to follow instructions for loading and editing of remote registry hives: http://www.rwin.ch/xp-live/regedit.htm make sure you unload the hive when you're done, otherwise the changes will not be saved.
These parasites can also revoke permission on the other key of registry and system files, you can use SubInACL to restore your permissions on these key objects, see here for more information:
I already read this post: http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/DC7900-SFF-Drivers-for-XP-Professional/td...
But unfortunately it does not solve my problem with a driver missing on the relocation of a Windows XP Pro SP3 with the DC 7900 SFF.
The missing pilot is linked to:
PCI \VEN_8086&DEV_ 3 A 02 & SUBSYS_3034103C & REV_02
Everything else seems fine.
If someone could give me some information or links to the correct drivers, would be great
(already tried most of the available drivers on the HP site for this model)
This hardware ID decodes the Intel ICH10D / DO SATA AHCI Controller.
The chipset installation utility should be installing this product...
My DELL D600 has OEM Windows XP Pro SP3, and netframeworks all or almost suddenly started not ANSWER DO NOT each time. I don't know what went wrong, it's driving me crazy. I can't afford to upgrade.
I tried the fixit from Microsoft online, no luck.
I uninstalled a few programs, perhaps thinking it's too full. Still no luck.
Whenever I use any folder window, or any element of the queue at all, the same thing happens, every time. "Not responding" delays on the window or the desktop contains the item. Must hit Ctl + Alt + Delete at least twice, if not 3 - 4 times. Each 'entry' lasts for a number of at least 26 and often much longer. Basically, Windows is not very functional.
I have two OEM for Dell, not sure that I put here (I was wondering if I should repair-installation Windows), but worried to destroy my Office Server installations that have 3 WordPress developments. I can't afford to destroy the.
Any ideas to FIX this would be greatly appreciated.
Good, minor success.
The returned quickly file number, but a re - check with Roguefix showed, it was not clear, no change in System.
I therefore decided to start uninstalling things, hoping to uninstall accidentally the culprit.
First I stripped all the netframeworks and the SPs. Has failed, file number remained.
I then started to uninstall programs. After uninstalling programs a half-dozen, suddenly THE FILES ARE WORKING AGAIN! Don't ask me why.
Then, I rebuilt my netframeworks and SPs.
Then, I clicked to access Microsoft Updater to get up to speed.
IT WILL NOT BE UPDATED. Failed! is what I get. It says the software needed TO be updated is not in my HD and offer a download. When I try to download and install failed! It will be not even installed that.
This goes back to the same "cause" - for reasons unknown the last 4-6 weeks, installing any updates in my DELL D600 Windows XP Pro OEM. Initially, they install. Then begins the phase were some updates installed, others down without reason.
Then, no updates would be installed. That was BEFORE I plucked executives trying to solve the issue of records.
It is not even asking me to install the real test happened before, I think that. I think it was in August 2013 or almost.
I'm desperate to get the updates, if you have an idea on how to help me.
Windows XP Pro, SP3
Recently made a clean installation fees.
Now, every time the logon / Welcome screen, screen saver will not invoke after the specified time-out period.
If the computer is on any other screen, a screen saver will call after the specified time-out period.
I can't understand why the screen saver will invoke is no longer when the connection / welcome screen appears.
If anyone has any input on this, I would appreciate it.
The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
TechNet - Windows Server
For the past 2 weeks I can't get windows on windows xp pro sp3 updates. The green bar that runs while the verification of updates just keeps running and running and does'nt stop until I have stop. No error codes at all.
Run the fix it tool and indicates "registration for the service is missing or corrupted" and it offers a solution for the problem of the does'nt.
What is the reference for this?
I had the same problem and you will spend one day trying many suggestions, including various Microsoft Fix - its, which none worked, and which some worse messing with the BITs service (that I then had to restore, losing even more time).
In the end, I found that the problem was related to the update of Cumulative security for Internet Explorer 8. There is a kind of incompatibility with previous versions of this update that causes IE stuck when he tries to check the updates.
The solution for me was to download and install the * last * IE Cumulative Security Update * manually * before you try to run Windows Update to get the other patches. Here's how:
(1) using the Internet Explorer, I visited the current MS security bulletin page
(2) from there, I went to the latest summary (November 2013) and found the update of IE at the top of the list: "Cumulative Security Update for Internet Explorer (2888505).
(3) I couldn't see direct links for just this update, so I copied the number of the Knowledge Base - 2888505 - and google for "Download KB2888505" (Bing didn't work by the way). This gave me the direct download link:
(4) I have downloaded and run the update installer and then restarted (as required by the software update).
Microsoft/Windows Update restart worked. I repeated the same process on a second computer with the same problem and it worked also.
I'm the reconstruction of a laptop Toshiba A100-PSAA9A-10U038 with a new installation of Windows XP Pro SP3.
At this point, I have not all sounds (Yes, the volume is set to the top).
As this is my first post I covered I hope that most of the bases as with SP3 and I installed all the updates available from Toshiba and Microsoft - well at least, I guess I have. I downloaded the latest updates from Realtek who advised in a general forum but no luck.
Device Manager tells me that there are problems with a "PCI Device" and a "unknown device", and I assume that one of these two is the culprit.
Any suggestions would be much appreciated.
I think that you have installed the driver of his evil.
See this page:
you will find all of the Win XP drivers for this model of laptop.
As you can see there are two different Realtek drivers:
V Realtek Audio Driver 126.96.36.19953
-Realtek ALC861 Audio Driver 188.8.131.5200
To my knowledge, you have the Realtek HD audio Manager.
But before install you the audio driver SP3 must be installed, it seems, that you did
However, the most recent audio Realtek driver can be downloaded from the Realtek page directly.
Select this check box, and then choose Manager Realtek HD audio for Win XP.
I need help to find the disks required to run Windows XP Pro SP3 PT - PT on my Satellite A200 - 1 3.
Due to the extremely poor performance of Windows Vista, I did a downgrade of the operating system and I've managed to install the SP3 Windows XP Pro PT - PT, but some components does not (Ethernet, network, WiFi, Audio, Modem, video VG compatible) as they shoud due to the lack of correct readers for XP.
I tried to find the spec of my machine then trying to find the right drive in the components manufacturer sites in the Toshiba site, but it turns out be a mission impossible because it seams to have a detailed description on all machines A200 except A200 - 1 3.
If you can help me on this topic, I would be grateful. Thank you.
Why you don't use an advanced search option here in the forum to get similar questions:
Need active sync for Windows XP Pro SP3. Where can I find it? If not available what other options I have. Too much on the computer to be upgraded.
Download of Active Sync works with Windows XP SP3, download was released before the release of Windows XP SP3, so it did not appear in the system requirements.
You can install the version of Active Sync listed above.
original title: links in e-mail newsletters don't work
I am using Windows XP Pro SP3. IE8 or FF8 can open all the links that appear in my subscription newsletters. The message I get is:
Firefox can't establish a connection to the server...
Because this happens with both browsers, I suspect that some settings in Windows is the origin of the problem - maybe an update. Everyone knows about this type of behavior? Someone at - it suggestions for me?
This information should be useful.
1. the HOSTS file would have an impact on all browsers. If you do not deliberately use the HOSTS file to block some websites, run the FixIt in this article to reset (clear on) the HOSTS file.
How can I reset the default Hosts file? :
2 key is only, but go to Internet Options > privacy and try a cookie of low value or accept all.
3. from security on the IE command bar > InPrivate filtering settings, disable filtering.
Always safe > Filter SmartScreen > disable the SmartScreen filter.
4 disable third-party security programs (antivirus, antispyware, firewall, etc.) * just long enough * to test some links.
5. similar to the #3, but more in depth...
The clean boot troubleshooting, try.
331769-how to perform a procedure to clean boot (XP & Vista)
Hello. Not sure if this is the right place for the post, but im pulling my hair out.
I got a copy of Windows XP PRO SP3 OEM for awhile. The installation disc is damaged and was unusable. I have a legitimate product key which is connected to the computer.
Is there anywhere I can buy or order a replacement CD-ROM.
I can't find a copy of this disc anywhere. On the COA, proof of license number is x 14-01711. I looked up and down and still no luck.
I got a Windows XP Pro SP3 .sdc, but the license key is not accepted during the installation.
Thanks for your time.
I have problem can I share great memory for Windows XP for example I have 10 Windows XP Pro SP3 with 1 GB and 10 GB of RAM allocated memory and the vsphere client tell me who have bad memory 10 GB usage but use XP can only 100 MB I share memory with new virtual machines if I create multiple virtual machines for example more than 5 ill machines have 15 virtual machines with 1 GB of memory allocated and they will use the 1, 5 GB or 15 machines by 100 MB. Thank you very much if anyone can help me
But if vCenter have a load balancing if a machine have the overhead that the machine will be move to the other physical machine in the cluster it is true?
Yes, if you have at least two ESX servers in a cluster, active DRS and its value is fully automated, VM is moved from the host with one high Mem Usage to another with the use of balance the workload less Mem on cluster.
And... In summary, the memory usage of field is memory not allocated the memory used is true?
Yep, memory used is on the performance tab and WOG is called Active memory
And in the Virtual Machines on the comments memory field is real memory use and I can share all the memory I don't use right now?
I don't know if I understand your question:
If you wanan see the amount of memory used by your VM - check memory Active in the VM system tab
Here you have explained all the metrics of memory on a virtual computer
I have installed windows xp pro sp3 on a machine virtual workstation in win7 premieum. to the prevalence of xp pro she asks me the password of an account $netshare that I never created. the fact I can access from not a win xp please help me thanks
Click in the virtual machine window and para Ctrl + Alt + Delete twice and pour it to appear a different login screen. Try no password administrator or if you have created an account to a different name, you can try.
Daul Boot Windows XP PRO sp3 and WIN7
I want to have my pc to be a configuration to boot Daul with Windows XP PRO sp3 and WIN7 how?
Access the link that has a video on how to set up a configuration to dual-boot between Windows XP and Windows 7: http://www.microsoft.com/showcase/en/us/details/ae3108ed-a8a1-4ba3-8698-01b8cedd2cf4
Here's a few that has information on multiboot: can I have multiple operating systems on my computer (multiboot)? : http://windows.microsoft.com/en-US/windows7/Can-I-have-more-than-one-operating-system-on-my-computer-multiboot
Install multiple operating systems (multiboot): http://windows.microsoft.com/en-US/windows7/Install-more-than-one-operating-system-multiboot
I have windows XP pro sp3 and Internet explorer 8. ISP verizon fios with msn. Use messenger and windows live mail. Lavasoft stop guard in and I can't remove it. Got any ideas?
Hi pAULINE DUGAN.
1. have you already try to remove the program from Add or remove programs?
2 How long you have been facing the issue?
3. What is the error message?
Step 1: To unintall a program, you can follow the link, try the steps in the link and check if this is useful:
How to change or remove a program in Windows XP
Step 2: Follow the steps in the article to uninstall lavasoft software.How to manually remove programs from the add tool / remove program
I hope this helps.
Maybe you are looking for
There is no 'images' folder in the Finder. I thought that was where all the photos have been stored.
Hello I bought a Hp laptop today with the DOS operating system, When I was installing windows 7, I've seen 2 drives already present in the BIOS, 1. by car 7.6 GB HPDOCS 2 drive with again of 7.6 GB (which could contain the drivers) 3 was unallocated
I would like to add a name to a few ip addresses in the table of DHCP client currently, there is an asterisk for a few names of customers. Anyone know how to add names? the router is an ea3500.
Hello I need callid, name, name of the company from the list of contacts to the use of the incoming number. If anyone has a solution please reply me as soon as possible.
Hallo,in lots of examples that I have seen that sometimes the whole (through the Binding property) UI component is bound to a variable of bean and sometimes only the value property is bound to a variable of bean.I understand that when it comes to the