Drive hard squeal

Similar Questions

• I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  Use Time Machine or a clone to copy to the outside.

  Time Machine Basics

  Basics of Time Machine (2)

  Time Machine Basics (video)

  Time Machine FAQ

  First Time Machine backup

  Clone - Carbon Copy clone          (Often recommended because it has more features than others)

  Clone-data backup

  Clone-Deja Vu

  Clone - SuperDuper

  Clone - Synk

  Clone - 6 tested Applications Software

  Time Machine from the Clones and Archives

  Commonly used backup methods

• Use iMac drive HARD internal for storage only.

  I initialize my iMac to an external SSD. It makes my computer run faster. How can I completely wipe the drive HARD internal of my iMac and use it as a storage only?

  This isn't a big problem, except one. Apple does not support this method as a permanent solution. However, you have an iMac of 2012. I have a Mac Mini from 2012. I used a 1 to LaCie Thunderbolt Rugged HD to do this thing very via the Thunderbolt port. It worked very well for a while. Personally, I started my primary internal HD for OS X and the LaCie Thunderbolt as external storage. For reasons of registration and so on. Recovery of the Internet, as well. I have not found any major difference in the "boot speed" between internal or external HD. I upgraded the RAM of 4 GB to 16 GB all. and BAM!

  My HD Thunderbolt is partitioned as a time Capsule (1st partition bootable) and Mac Storage (2nd partition). The choice is yours, of course.

  Bravo!

• IS does not recognize the drive HARD internal

  I have three, all from a school lab, that have been linked with other positive points and printers.

  They are connected are not together anymore.

  All three have a floppy drive and a HARD drive. Will only boot from the HARD drive.

  At startup, the other two do not recognize their HARD drive and I use ea disk with the system in this regard.

  Since hard drives are not 'seen' I am unable to do anything with them: fix, set up as a boot drive, etc.

  They begin with the usual chimes and the Mac with the question mark, I slip the disk in and they complete commissioning.

  The internal drive spin up and the indicator light flashes.

  They do not show the drive HARD internal on the screen, but will show an external.

  I haven't started to swap parts between the good and the other two.

  Does anyone have an idea on how to activate an invisible HARD drive?

  You will need to use the boot floppy disks to start the machines to run the repair disk, partition and format the HARD drive if it is still functional. Only then can you install Mac OS on the HARD drive. That's all that I remember.

• Error: 4M0T/4/40000003: drive HARD-1287

  I have problems with my iMac 27 "2011 with El Capitan.

  I run the Apple Hardware Test and found this error: 4M0T/4/40000003: drive HARD-1287.

  What it means?

  Thank you, Lucas.

  This means that you have hardware problems that must be addressed. Probably your HD sensor, fan or has failed. Take the machine to your local Apple service provider authorized to repair, if you do everything in your area, please click on the link of the Service Provider Locator allowed Apple to begin to find a.

  Good luck.

• How can I use my drive hard thunderbolt from 8 TB to backup all my wireless devices?

  How can I configure my drive hard thunderbolt from 8 TB to back up all my devices using a Wi - Fi connection?

  What you might hope better would be to use a Thunderbolt-to-Ethernet adapter to connect to the router, but even if it works, it would be like a fire (Thunderbolt) connection to a water hose (Ethernet) is launching... and expect to get more water on the hose... more, the best that can be done without wire will be about half the speed of the Ethernet network.

  Sorry, this is no sense... a Thunderbolt drive is designed to connect directly to a Thunderbolt port on a computer, or in a Garland with other devices Thunderbolt.

  In other words, as soon as you break the chain of connection Thunderbolt, the speed drops to Ethernet or even low speed wireless.

• 4MOT/4/40000003: drive HARD-1383 and 4MOT/4/40000003: drive HARD-1373

  Does anyone know the significance of the errors 4MOT/4/40000003: drive HARD-1383 and 4MOT/4/40000003: drive HARD-1373 that occur when you run Apple Hardware Test (AHT)?

  I guess it has to do with the hard drive by noticing the "HARD drive" code. IMac 27 "mid 2011 EMC 2429 3.1 GHz Intel I5

  Thanks for the reply.

  These error messages indicate cooling fans have a problem.  It is a hardware problem which is best treated in an Apple store genius bar.  The assessment will be FREE.

  Ciao.

• New drive HARD and OS upgrade on Equium A210

  I want to install a new SATA hard drive more and also upgrade from Vista to Windows 7 is only a problem at all and that I can use a normal Windows 7 disc.

  Hello

  Generally avoid any problem with drive HARD and OS upgrade. If you want to have the exact answer please let us know what model of laptop you have.

• Toshiba T2000SXE - drive HARD work not correctly

  Hello

  Me, it's once again and needs help mine I only before the court it is however more also not drive HARD problems got can help me there is one
  Skype: benny24534
  MSN: benny_elfischnuffi@live
  East of Germany (Germany)

  has also no BACK or as

  Thanks to vorraus to aid

  Hello

  To be honest, I don't understand what you mean :) It would be better if you wrote in German he could understand.

• Satego X 200 21U: drive HARD internal not external usable after upgrade

  First, I changed the system to a 500 GB HARD drive, and everything was good. The old drive was not usable extern, so I left it as an emergency backup device.
  After a few weeks, I did the upgrade even to the second HARD drive, and again the old drive is not usable in my extern Dockingstation.
  Does anyone have a good idea what causes this problem? The HARD drives are locking the entire system, if I try to access and some formatting.

  Hello

  What do you mean by is not usable in my external docking station?

  I assume that you have placed the 2.5 HARD disk in a USB enclosure that allows to connect the HARD drive to the computer USB port.
  Is this good? So what harm s? Is not recognized USB HARD drive or what?
  Have you tried to connect different computers HARD drive?
  Otherwise, to do this

  But if the HARD drive is not accessible, using the case of USB, or use inside the laptop, then I would say it is a HARD drive malfunction

  Why this is happening?
  The writing and the reading drive HARD is a physical process which underline the material parts such parts can still die

• Drive HARD Toshiba guaranteed external profile corruption

  Hello

  I have a Toshiba secured 200 GB device. I moved some data from my laptop with Windows Vista 32 bit Edition on this disc.
  Then I tried to work with this pluging of data from the device on my new laptop with Windows 7 64 bit Edition.
  There was an error and the certificates to mount the drive on the new system (this is what Windows)

  Now I have can´t access to my data or on Vista or Windows 7.

  The unit shows a log of errors with this report: "the secured unit may be abruptly removed or disconnected.
  Reboot the system and plug the device to solve this problem. »

  No matter how many times I reboot my computer and repeat the process, there is no way to access my data again.
  I can record a new finger but I Don t want to lose the chance to recover my data.

  Any idea, please?

  Thank you very much.

  In my opinion, you should contact Toshiba service provider and ask for help. They should provide support for the Toshiba device.
  Maybe they can you give some advice or even access your data for you.

  I have the old external 2.5 120 GB drive HARD Toshiba for 4 years now and I'm really lucky that I don't have this problem.

• How much is a new drive hard hp product number is NP211AA - ABA MODEL P6112P

  My Device Manager shows my hard drive as a

  Drive SATA TOSHIBA MK6476GSX im do not know the size but in my drive C is about 575 f tools GB and my D is 20.1 and hp 99 mb. im not sure if im suppose to add anyone to the top or through the drive c only.  Im trying to contact hp to see if they could replace my drive hard when it goes too hard to use but id like a starting on that price, so I know not if its more wise to do things fixed or shopping for a new laptop.

  I have a

  Pavilion laptop 2123us g6

  Product B5A04UA number

  Windows 7 64-bit sp1

  If you have activated the link to parts store, I've included it should show hard drives available for your model and prices for your area. If you prefer to fix it as a repair, then telephone HP support, please use the following http://www.hp.com/contacthp and create a folder for your question. Once your case is created, you should get the number to use to contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Either by the way, if you have only one hard drive installed which is the normal case, the size of your hard drive will be the sum of all partition sizes as well as all space not yet allocated.

  I hope this helps.

• Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

  Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

  

  I did it with a 32GB SDHC UHS - I Transcend

  

  I do not recommend under OS X from such media, but it works very well. I was preparing for my review of the CPHA Yosemite and did not want to mess with the internal drive of OS X.

• Re: Satellite L555 11 L: BIOS indicates the drive HARD is not installed, BOOT Manager said HDD

  Hello!

  I had problems with my Toshiba laptop.

  When I tried to boot my system after a regular stop it does not recognize the HARD drive more.
  BIOS indicates the drive HARD is not installed, the said BOOT Disk Manager failed.

  Tried the HARD drive to a desktop computer and it works fine. This is not a new HDD SATA is recognized.
  However, the boot sequence itself and other functions seem to be ok.

  Who is wrong?
  The laptop is 1.5 years old and didn't have any problems before.

  Any help is appreciated ;)

  Hello

  It seems that the HARD drive is damaged.
  In your case the drive HARD test would be recommended.

  Download the software called Drive Fitness Test. It the free tool that can be used for the test of HARD drive.
  If the HARD drive is not detected or you will get errors, then it means that you HARD drive needs to be replaced and OS need to be installed again.

• How to replace a new drive hard satellite 1670cds

  How to replace a new drive hard satellite 1670cds
  do I have to remove the keyboard?
  wath is the GB limit

  Hi Theo,.

  HARD drive is mounted on your machine fest, and it is not easy to change. First you have to remove the keyboard, then view and top of page coverage too. If you want to do it yourself, be careful. If you do something wrong, it can be very expensive.

  It is not easy to say which is the limit of the HARD drive, but I'm sure you can use 10 GB with no problems. Try to contact the after-sales Service of Toshiba partner. Perhaps, they can give you specific information.

  Good bye