Drive in the SCSI devices instead of SATA shows Device Manager
I added a Via SATA card PCI card to get an additional SATA port on my old motherboard. Then after I loaded the pilots who were only of Raid, I do not have raid, and I noticed the drive SATA hard watch now WDC500xxxxxxxx SCSI Disk Device under disk drives, but only one of the disks. How can I remove SCSI? My Nvidia 7025 shows that 2 Nvidia nForce Serial ATA Controllers under controllers. I have XP Pro SP3 (latest updates) with an ASRock n68c-s mother (New) now 4 gig ram AMD Proc. I tried to replace the driver, but he said it was the best. I can't find revaluations on the canvas or the drivers provided with the motherboard, only the controller drivers.
Hi bmazak,
Method 1
You can follow this link and check if the problem persists.
How to use disk management to configure basic disks in Windows XP
Method 2
You can also uninstall the drive and reinstall back. Later, check to see if the problem persists.
You can also check this link: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_disktrouble.mspx?mfr=true
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
IHAVE pavilion g6 2006tx with win 8.1 pro ineed driver for the unknown device
driver for the unknown device
Hello:
This is the driver you need for this device:
-
External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management. But when I checked in system information, it is also displayed device but sectors and the tracs where showing the value 0.
Hello Sharan,
These links may help:
-
Connect my phone: not found a driver for the unknown device
USB port
wanted to connect my phone to the computer, says "not found a driver for the unknown device" what to do?
View your manufacturers of mobile phones and FAQ about the connection to win7 support
-
No Apple USB driver in Windows 10 Device Manager
Is there a way to retrieve the Apple USB driver in Windows 10 Device Manager. I downloaded the iTunes 12.3.3 yesterday and now he is gone.
I tried
- plug into each of my Apple devices (iPod, iPad, iPhone, iPhone 4S 6)
- restarting my computer
- disabled my virus protection software
- synchronization with different strings (some Apple, others not)
- my devices restart and try again
- Uninstalling iTunes and reinstalling
- Uninstalling iTunes and goes back to and older version
- make a Windows system to a restore point when I could synchronize my devices
My main problem is that I need to sync my devices and iTunes does not detect them without the driver. Windows can detect my devices and they appear in the file Explorer. I am also able to get pictures and videos I've taken off the power unit and on my computer with no problems.
Anything else I can try? I'm out of ideas. Thank you!
This can help:
If iTunes does not recognize your iPhone, iPad or iPod - Apple Support
Refer to the section:
If you are using a Windows PC
and read carefully. Depending on your version of Windows the Apple Mobile device driver may appear in different places.
Other than that, the General adzice is to demolish EVERYTING associated with iTunes and reinstall. See excellent iTunes for Windows troubleshooting page located at turingtest2:
Troubleshooting problems with iTunes for Windows updates
especially the section:
Remove and then reinstall iTunes and other software components
-
The device icon and text missing in the imaging devices Manager
The device icon and text missing in the imaging devices Manager
I'm running MS Vista Ultimate.
The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.
The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.
However, the device will not work and will not reinstall.
When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.
Yet once, however, this happens when I try to install any imaging device.
I'm unable to locate information about the imaging devices in the registry.
I think that some registry entries are missing.
It is not the missing peripheral individual. This is the section in Device Manager.
The image error is logged:
"Windows didn't load setup." Contact your hardware vendor. »
This happens with any device inaging of anyone.
What imaging device do you use?
We can try a few steps and check if it helps you.
Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter
If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:
http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
Now follow the following steps:
1. Save the Windows Installer Cleanup Utility package on your computer
2. right click on the Windows Installer Cleanup Utility and run as administrator
3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button
4. click on all programs. Click on Windows Install CleanUp Utility.
5. click on the device driver (if on list) in the list of programs.
6. click on Remove. Click OK
7. click exit
Restart the computer for the changes to take effect
Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-deviceAfter back and let us know if it helped to solve your problem.
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Please can anyone shed light on this, or suggest where to look?
I built an application using the Application Builder of LV2014 (32 bit).
On a Win7 X 64 PC at work, it installs and runs ok.
On Win7 X 64 PC at the customer, it installs ok, but then after Windows restarts on demand 'device manager' no longer works and there are some unchangeable registry entries associated with nipalu. The client runs Symantec security software. A client COMPUTER technician is suggesting that LabVIEW is interacting with device drivers and this is the origin of the problem, but we do not know how to go further. It is not really acceptable to deploy computers where the Windows Device Manager no longer works. Surprisingly, the application itself works always - it's just Windows which messed up.
Thank you
Thanks for the suggestions. The company IT guy has not been able to talk to a person in NI UK support (no one was available), but he managed to keep it down to a problem with Dell Data Protection encryption Enterprise Edition. Delete first, then install the LabVIEW application, then reinsert DDPE gave a system where everything worked.
We have built apps that used progressively more labview drivers (vision, labview base; digital i/o)
-
How to set the parameters of "Configuration ThinPro" via the HP Device Manager
Hello
Maybe I'm blind, but how can I set the settings in "Setup ThinPro', accessible from
ThinPro Control Center-->
Control Panel-->
Setup-->
Configuration ThinPro
through the HP Device Manager? These parameters allows to use a very strict kiosk mode, which we want to deploy. So far I found just to solve this problem through a complete picture, but this isn't a solution for me.
I hope that I have forget something or you have another clue.
Concerning
Looks like there is no direct way via the HP Device Manager. Now, I manually configure a thin Client and save the registry.xml that I can ride with other devices.
Concerning
-
Hi, following an automatic update of Windows Vista 64-bit I have no sound. Thank you for that. I had a similar problem before, the sound quality has been reduced to a rate lower than 16 bit 44.1 k. I've changed this before clicking on the button configure on the playback device, manage audio devices. But now, this button is disabled and I can't check the set up or make changes. I am logged in as an administrator user, how to re - activate the button set up?
Thank you
Darren
Hello, I have stopped the Windows Audio Service and rebooted a couple of times. Now I have his back.
Thank you
-
Sony z3 appearing is not in the google Device Manager
Sony z3 appearing is not in the google Device Manager
I checked the security rating...
even with my new Tablet sony z3.
Strange thing. Are you ready to try the fix? Do it with CCP if you want:
-
I get this message whem check the computer Device Manager
Intel(r) management Engine Interface cannot start (code 10)
Thanks Ephraim
Please provide us with your administrative Event Viewer logs by following these steps:
Click on Start Menu
Type eventvwr in the find programs and files (do not hit enter)
Click with the right button on eventvwr.exe and click Run as administrator
Expand custom views
Click the administrative events
Right-click Administrative events
Record all events in custom view as...
Save them to a folder where you will remember which folder and save it as Errors.evtx
Go where you saved Errors.evtx
Make a right click Errors.evtx-> send to compressed (zipped) folder of->
Download .zip here (if you can) to skydrive or a file sharing service -
WinXP Pro think my IDE/ATAPI Zip 100 Drive is a SCSI device and does not read disks.
Zip Drive 100 a () works fine in my old computer with Windows XP and my new computer P4 (Core 2 Duo) the analysis of the Bios boot correctly sees as an IDE/ATAPI drive, but the Device Manager Windows XP Pro says it's a SCSI device. Tried several zip disks that work very well old computer. Also noticed that the computer WinXP Pro says the disc have a RAW format file system when I click Properties of the drive in 'My computer', but the disks are formatted with the FAT of another computer file system. When I try to read the disc, WinXP Pro says that they aren't formatted - I want to get in shape, so I tried to format a and she failed.(1) problem RAW file system: CPU OS WIN XP D: drive is IDE/ATAPI ZIP - 100. C:HDD E:DVD F: CD-ROM. A ZIP disk would not format of older CPU. Also at the DOS prompt displayed ZIP disk saves but XP files don't display anything without files or diskThe drive was not recognized by XP because of the type of file in RAW format. COULD NOT read or format. Similar to your problem
To solve: KICKED CPU with the WIN ME & WIN ME CD startup disk. Backpack prompt type A: B: the ZIPPER was displayed. Then Typ B: format b: enter & reformatted in the ZIP in the BACK. Typed in the label to check the format. Rebooted FDD & CD removed & CPU disc. In XP my computer now recognizes the D: drive with a ZIP disk. The file system has changed from RAW to FAT. Correction of a problem
(2) your problem: IDE/ATAPI ZIP - 100 HDD not found in XP operating system but as seen in the BIOS.
To fix: check hardware configuration. ZIP drive must be jumped as a slave in the Middle connection on the water with your hard disk (HDD) cable. ZIP - 100 should show that D: & Hard drive show as C: make sure that the ribbon cable is attached properly - PIN 1 for the two discs in PIN 1 of the cable. Also, ZIP supply sheets must be connected correctly.
Hope the above will solve the two problems of ZIP - 100 drive your.
-
Dell Optiplex PC 390: the driver for the PCI device is not installed
In "Devices and printers" my desktop unit shows a yellow triangle with an exclamation point.
When I click on "help" I get the message "PCI device driver is not installed. When I try 'apply this correction', nothing happens, it retains only the search.
I've read to go to "Control Panel > Device Manager" and click on the part of the problem, then click on "Details > hardware ID" and I get the following:
PCI\VEN_1FD4 & DEV_1999 & SUBSYS_01011FD4 & REV_00
PCI\VEN_1FD4 & DEV_1999 & SUBSYS_01011FD4
PCI\VEN_1FD4 & DEV_1999 & CC_070800
PCI\VEN_1FD4 & DEV_1999 & CC_0708
I don't know where to take from here. Can anyone help?
Thank you
Kathy
Hi, Kathy:
Here is the link for the driver you need...
For later use, there is a Support Forum of community Dell for Dell desktop PC.
-
Windows 8 driver for the Bluetooth device
I have a HP Envy 4-1070el ultrabook and I installed Windows 8 a few days ago (maybe I'm going to upgrade to Windows 8. 1).
I am struggling to find a driver for my Bluetooth device: it should be a Broadcom, because I installed the driver available here when I was running Windows 7 and it worked fine. in fact, there is no Windows 8 compatible driver for my device and update Windows and HP Support Assistant can not find a driver.
Windows 8 Device Manager reports the following information
Description of the device: BCM20702A0
Hardware ID: USB\VID_0A5C & PID_21E3 & REV_0112
USB\VID_0A5C & PID_21E3
Someone suggested to install the driver Broadcom Bluetooth standard available at http://www.broadcom.com/support/bluetooth/update.php, but I would like to know if anyone had problems like me and found the right solution.
Thank you.
Luigi BrunoHi, Luigi:
First try this one...
-
250 GB HARD disk installed but it is not recognized... device manag says its offline... doesn't I want to initialize it. said: IO error... impossible to format... tried so many things, even tried diskpart or cmd promt... no joy! If any1 cud help id be greatfull Yes... oh ye also in Device Manager it has a circle with a red arrow facein down in... If dat help?
IM so annoyed wit saying p.o.s.... Please help... tanx.
If the utility of car manufacturers is unable to perform the test, it means that the drive has failed.
Try it on another PC, see if it works it
Maybe you are looking for
-
Could not find any IOS in the app store
OK, the MacBook Pro 2011, was to restore settings factory now under Snow Leopard... yuck lol... trying to go back to the last IOS I was... .but not found on the App Store... found all those that I had in my purchased iTunes folder but everything is g
-
I have a Lenovo Y580 and I had a few questions about the physical limits, since they are not where under the technical specifications of the laptop (unless I'm wrong or overlooking something). First of all, I want to know if I'm allowed to upgrade th
-
Then the Z575 manage a 1 TB HARD drive?
-
BitLocker preinstalled Windows Vista Ultimate Edition
I have BitLocker on a computer pre-installed with Windows Vista Ultimate Edition, if my TPM module has been disabled; I can see the link in the BitLocker Control Panel icon to turn on after clicking on it to turn it on, it tells me to turn on the TPM
-
dynamic rollover with connection cable between pix
Hi I have a strange doubt probably silly. I have 2 pix 515E all identical abt them.all ports are 100 Mbit/s. I want to Setup failover stateful s them. can I connect the 2 pix with a crossover between the then cable and affecting their full duplex. is