Drive not valid error H:
I have Windows XP Professional SP3 and when I try to install or uninstall an application I get a "Error 1327 - Invalid drive H:". My system does not drive H:
What follows is to modify the Windows registry, so be careful. Please back up the registry first. The easiest way is to do it using the free program C:\WINDOWS\ERUNT
Open regedit (start > run > regedit > OK)
Access
HKEY_CURRENT_USER folders
and look in the right pane for any value in the 'Data' field that contains an invalid drive (for example, h). If a value contains a drive that is not correct for your computer, right-click on the entry and replace the data with the correct information.
Repeat the above for each of 4 additional registry keys following:
- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
- HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion
- HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell folders
- HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
Close regedit.
If you go to start > run and enter one of these variables (don't forget the percent signs), a Windows Explorer window should open showing a valid folder. For example, if you
Start > run > %UserProfile% > OK
the Windows Explorer window opens, showing the content of
C:\Documents and Settings\nom of user (where user_name is the name of your Windows profile)
Although the GUI of Windows allows you to change some environment variables, I don't think you can change one of those you're likely to find in the registry keys above. If it turns out that one or more environment variables in one of the registry keys points to an invalid drive, after return with details to learn more.
Tags: Windows
Similar Questions
-
Original title: I have windows xp. What does "drive not valid error 1327: J:\. "means and how to fix it?
Hello
I have windows xp and I am trying to download adobe reader, but it will not complete the download because there is a "drive not valid error 1327: J:\. "box that appears. I have no idea what this means or what to do. I didn't know that there was such a unit, because I can not find it. I hope someone can help. Thank you.
Hello
1. are you able to download another program?
2. you have any program installed download accelerator?
3. what browser do you use?Read the following article that may help you resolve this problem.
Error 1327. "Invalid drive" | Install | CS4, CS5, Acrobat, Reader
http://kb2.Adobe.com/CPS/404/kb404946.html -
Running xp service pack 1 2 3
2 GB memory
5 GB of free space
Direct X 9
Try to install elements 7
I have already installed 3 elements. Do not want to delete because it needs to work.
1327 error when I try to install something on my computer not changed also.
Simple help please because I'm not a computer Wizard.
Thank you.
Question is closed.
The space was not the problem. The error was.
There is an own difficulty which is Hot_Key_User etc. However has not worked for me.
Two things that I did, but as I have done all both at the same time do not know who has worked!
I used the system restore back to about 2/3 of restore points.
As I have several users I swapped to the other party and the software is successfully installed on the users of the al.
Hope this helps anyone with the same problem.
-
Last year I buy Nero software, and it was installed on my laptop hard drive which has been J:\. Now for some reason, my computer has received a portable K:\ drive on my hard drive. So, when I try to open the program, it gives me drive not valid error 1327 J:\. He also stated that there is insufficient space in J:\, AND it gives me a message "fatal error in installation. Why he did it assign a different drive letter?
I don't know how to change the registry, because I'm sure that WHAT I have uploaded in this device will give me a similar error code when I try to use it. Help!
original title: problems in car
Hello
You must be sure that programs use the drive letter that you define or
you will need to change it back when needed. The latter would be the
more great pain in the long term.Most programs allow you to change the data reader. If the reader is a program
installed on and then after he moved to the drive letter, you will need to re - install the
program.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Hi, after many problems with the installation of 12 c first BECAUSE I am now a bridge, I have one problem left.
My system:
2 knots, with ASMLib
Storage: netapp
I created disks ASM, oracleasm say that everything goes well on both nodes:
[root@dbb-n15-01 /] # /etc/init.d/oracleasm listdisks
DISK01
DISK02
DISK03
DISK04
DISK05
DISK06
DISK07
But the Oracle installer condition tests says:
PRVF-5150 < DRIVE > not valid a path
Can I gnore it? Unter 11 g BECAUSE I know, that there was a bug, but I thought it's fixed...
Thanks for your help.
Greetings from Berlin
So, I ignored the Message After checking with oracleasm that everything is ok. The installation of the grid completed without error.
-
How can I fix defender of windows with pointer not valid error 0 x 80004003
How windows Defender ifix with pointer not valid error 0 x 80004003
Hello
· When you get this error message?
· You have security software installed on the computer?
Step 1: Temporarily disable the security software and check if it makes a difference.
Disable the anti-virus software: http://windows.microsoft.com/en-SG/windows-vista/Disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
-
I have a windows not valid error. and he asks me to activate windows again.
* Original title: Troubleshooting
Running Windows 7, 64 bit on my laptop 1440 dell. ive never changed hardware or software in this laptop. But suddenly I have a windows not valid error.
and he asks me to activate windows again... they want me to pay for the new license. Ive tried to go through the process and all the scenarios that they want me to buy a new one. Dell does not seem to have an opinion on what to do otherwise than to send me to the activation process. I ran anti virus and anti malware. has no results. Any idea?
Mark
I suggest that you run the diagnostic tool Microsoft Genuine Advantage in normal mode and copy and paste the results into a response for further analysis:
http://go.Microsoft.com/fwlink/?LinkId=52012
Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.
-
ORA-01001: cursor not valid error
Cursor UNA is throwing this error... ORA-01001: cursor not valid error
Can you please please help me find the problem.
Published by: 831050 July 20, 2011 06:50CREATE OR REPLACE TRIGGER LOT_DBA.CR_FIELD_CUT_AFTER_INSERT AFTER INSERT ON LOT_DBA.CR_FIELD_CUT_STAGING REFERENCING OLD AS OLD NEW AS NEW FOR EACH ROW DECLARE stmt_var VARCHAR2(50); err_msg VARCHAR2(250); conn UTL_SMTP.CONNECTION; crlf VARCHAR2(2) := CHR(13) || CHR(10); mesg VARCHAR2(2000); --cc_recipient VARCHAR2(50) DEFAULT '[email protected]'; cc_recipient VARCHAR2(50) DEFAULT '[email protected]';--6/24 msg_body VARCHAR2(200) := 'Please check CR_FIELD_ERROR Table for Details. '; systime DATE; V_CCI VARCHAR2(50) DEFAULT '[email protected]';-- 07/27/2010 Added Contractor Name for CT 2010-4071 CURSOR CUT (pl_no VARCHAR2) IS SELECT layout_no FROM CR_FIELD_CUT_SHEET WHERE LAYOUT_NO = pl_no; cut_cur CUT%ROWTYPE; CURSOR LOT (pl_no VARCHAR2) IS SELECT layout_no,contractor_name -- 07/27/2010 Added Contractor Name for CT 2010-4071 FROM CR_LAYOUT_TRACKING WHERE LAYOUT_NO = pl_no; lot_cur LOT%ROWTYPE; CURSOR DET (pl_no VARCHAR2) IS SELECT layout_no, cut_no FROM CR_FIELD_CUT_DETAIL WHERE LAYOUT_NO = pl_no; det_cur DET%ROWTYPE; CURSOR DTN (pl_no VARCHAR2, pl_ct NUMBER, pl_nt VARCHAR2) IS SELECT layout_no, cut_no FROM CR_FIELD_CUT_DETAIL WHERE LAYOUT_NO = pl_no AND CUT_NO = pl_ct AND NVL(NOTE,'XXXXXXXXX') = pl_nt; dtn_cur DET%ROWTYPE; CURSOR ITM (pl_no VARCHAR2) IS SELECT layout_no, cut_no, seq_no FROM CR_FIELD_CUT_ITEM WHERE LAYOUT_NO = pl_no; itm_cur ITM%ROWTYPE; CURSOR STAT (pl_no CHAR) IS SELECT MAX(create_date) cdate FROM CR_FIELD_LAYOUT_STATUS WHERE LAYOUT_NO = pl_no AND STATUS = 'AWAITING_COMPLETION'; stat_cur STAT%ROWTYPE; CURSOR UNA (pl_no VARCHAR2, pa_no VARCHAR2) IS SELECT layout_no, account_no FROM CR_ACCOUNTS WHERE LAYOUT_NO = pl_no AND ACCOUNT_NO = pa_no;--added for cha 2011-3172 6/14/2011 una_cur UNA%ROWTYPE;--added for cha 2011-3172 6/14/2011 BEGIN systime := SYSDATE; /* If the record being inserted in the staging table does not exist in the core table, the record is inserted in the core table. However, if it exists, then the record in the core table is deleted and then inserted. */ /* Delete items, then cut details, and finally cut sheet respectively so as not to raise the foreign key constraint */ --------------- -- Cut Items -- --------------- OPEN ITM(:NEW.LAYOUT_NO); FETCH ITM INTO itm_cur; IF ITM%FOUND THEN DELETE FROM CR_FIELD_CUT_ITEM WHERE LAYOUT_NO = :NEW.LAYOUT_NO AND NVL(NOTE,'XXXXXXXXX') <> :NEW.NOTE; stmt_var := 'Delete Cut Items'; END IF; ----------------- -- Cut Details -- ----------------- OPEN DET(:NEW.LAYOUT_NO); FETCH DET INTO det_cur; IF DET%FOUND THEN DELETE FROM CR_FIELD_CUT_DETAIL WHERE LAYOUT_NO = :NEW.LAYOUT_NO AND NVL(NOTE,'XXXXXXXXX') <> :NEW.NOTE; stmt_var := 'Delete Cut Detail'; END IF; --------------- -- Cut Sheet -- --------------- OPEN CUT(:NEW.LAYOUT_NO); FETCH CUT INTO cut_cur; IF CUT%FOUND THEN DELETE FROM CR_FIELD_CUT_SHEET WHERE LAYOUT_NO = :NEW.LAYOUT_NO ; stmt_var := 'Delete Cut Sheet'; END IF; --------------- -- Layout Tracking -- Moved it from below for Change Track 2010-4071 (OpenedByContractor). --------------- OPEN LOT(:NEW.LAYOUT_NO); FETCH LOT INTO lot_cur; /* This updates the table CR_LAYOUT_TRACKING's columns House Number into the new value set by the staging table. */ IF LOT%FOUND THEN UPDATE CR_LAYOUT_TRACKING SET HOUSE_NUMBER = :NEW.HOUSE_NUMBER WHERE LAYOUT_NO = lot_cur.LAYOUT_NO; stmt_var := 'Update Layout Tracking'; END IF; /* Insert record from staging table to Cut Sheet Table the complete_status is set to No. ('N')*/ BEGIN INSERT INTO CR_FIELD_CUT_SHEET (LAYOUT_NO , PERMIT_TYPE , SAWCUT , PLATED , COUNTY , STATE , WEST_MAP_ID , OPENED_BY_CONTR , PROTECTED_ST , COMPASS_POINT , STREET_NAME , ARTERY_TYPE , LEFT_CROSS_STREET , RIGHT_CROSS_STREET , SPECIFIC_LOC , EMER_PERMIT_NO , EMER_ISSUE_DATE , SERVICE_TYPE , PARKING_RESTR , RESTORE_REQD , CREATE_DATE , CREATE_BY , NOTE , COMPLETE_STATUS , EDIT_FINAL) VALUES (:NEW.LAYOUT_NO , :NEW.PERMIT_TYPE , :NEW.SAWCUT , :NEW.PLATED , :NEW.COUNTY , :NEW.STATE , :NEW.WEST_MAP_ID , lot_cur.contractor_name , -- Get contractor Name from cr_layout_tracking :NEW.PROTECTED_ST , :NEW.COMPASS_POINT , :NEW.STREET_NAME , :NEW.ARTERY_TYPE , :NEW.LEFT_CROSS_STREET , :NEW.RIGHT_CROSS_STREET , :NEW.SPECIFIC_LOC , :NEW.EMER_PERMIT_NO , :NEW.EMER_ISSUE_DATE , :NEW.SERVICE_TYPE , :NEW.PARKING_RESTR , :NEW.RESTORE_REQD , systime , :NEW.CREATE_BY , :NEW.NOTE , 'N' , :NEW.STATUS ); stmt_var := 'Insert Cut Sheet'; EXCEPTION WHEN DUP_VAL_ON_INDEX THEN NULL; END; --------------------- -- Cut Details New -- --------------------- OPEN DTN(:NEW.LAYOUT_NO, :NEW.CUT_NO, :NEW.NOTE); FETCH DTN INTO dtn_cur; IF DTN%NOTFOUND THEN /** start --added for cha 2011-3172 6/14/2011 **/ OPEN UNA(:NEW.LAYOUT_NO, :NEW.ACCOUNT_NO); FETCH UNA INTO una_cur; --------------------------------- -- CAPTURE UNPROCESSED ACCOUNT -- --------------------------------- IF UNA%NOTFOUND THEN INSERT INTO UNPROCESSED_ACCOUNTS (LAYOUT_NO , EMPL_NO , ACCOUNT_NO , LOG_DATE , COMPLETE_TODAY , NEW_ACCOUNT_NO , STATUS , CREATED_BY , MODIFIED_BY , CUT_NO , CREATE_DATE , MODIFIED_DATE ) VALUES (:NEW.LAYOUT_NO , NULL , :NEW.ACCOUNT_NO , NULL , NULL , NULL , :NEW.STATUS , :NEW.CREATE_BY , :NEW.CREATE_BY , :NEW.CUT_NO , :NEW.CREATE_DATE , :NEW.CREATE_DATE ); stmt_var := 'Insert Unprocessed Accounts'; SELECT EMAIL INTO V_CCI FROM C_LOV_CCI WHERE UPPER(NAME) = (SELECT UPPER(CCI) FROM CR_LAYOUT_TRACKING WHERE layout_no = :NEW.LAYOUT_NO); IF SQL%NOTFOUND THEN V_CCI := '[email protected]'; END IF; V_CCI := '[email protected]';--6/24 conn:= utl_smtp.open_connection( 'EXCHSMTP.coned.com'); utl_smtp.helo(conn, 'coned.com'); utl_smtp.mail(conn, '[email protected]' ); utl_smtp.rcpt(conn, '[email protected]' ); utl_smtp.rcpt(conn, V_CCI); mesg:= 'From: Cut Staging After Insert <[email protected]>' || crlf || 'Subject: Unprocessed Account (Testing)' || crlf || 'To: XYZ <[email protected]>' || crlf || 'Cc: ' || V_CCI || crlf ; mesg:= mesg || '' || crlf || 'Unprocessed account found: '||' Layout No: '|| :NEW.LAYOUT_NO || ' , Account No: '|| :NEW.ACCOUNT_NO ||' , Status: '|| :NEW.STATUS || ' , Created By: '|| :NEW.CREATE_BY ||' , Cut No.: '|| :NEW.CUT_NO || ' , Create Date: '|| :NEW.CREATE_DATE; utl_smtp.data( conn, mesg ); utl_smtp.quit( conn ); END IF; /** end --added for cha 2011-3172 6/14/2011 **/ INSERT INTO CR_FIELD_CUT_DETAIL (LAYOUT_NO , CUT_NO , SHALLOW_FACILITIES , CUT_LENGTH , CUT_WIDTH , CUT_DEPTH , BASE_DEPTH , BASE_MATERIAL , SURFACE_DEPTH , SURFACE_MATERIAL , LANE , START_POINT , LINEAR_START_CUT , LINEAR_CURB_CUT , SHAPE , PAVING_REQUIRED , OPENED_DATE , EXCAVATION_DATE , BACKFILL_DATE , BASE_DATE , TRENCHING_DATE , BASE_MAT_REPLACED , COMBINED_CUT , CASTING_DEDUCTION , ACCOUNT_NO , CREATE_DATE , CREATE_BY , NOTE , STATUS , REMARK , PERMIT_NO) VALUES (:NEW.LAYOUT_NO , :NEW.CUT_NO , :NEW.SHALLOW_FACILITIES , :NEW.CUT_LENGTH , :NEW.CUT_WIDTH , :NEW.CUT_DEPTH , :NEW.BASE_DEPTH , :NEW.BASE_MATERIAL , :NEW.SURFACE_DEPTH , :NEW.SURFACE_MATERIAL , :NEW.LANE , :NEW.START_POINT , :NEW.LINEAR_START_CUT , :NEW.LINEAR_CURB_CUT , :NEW.SHAPE , :NEW.PAVING_REQUIRED , TRUNC(:NEW.OPENED_DATE) , TRUNC(:NEW.EXCAVATION_DATE) , TRUNC(:NEW.BACKFILL_DATE) , TRUNC(:NEW.BASE_DATE) , TRUNC(:NEW.TRENCHING_DATE) , :NEW.BASE_MAT_REPLACED , :NEW.COMBINED_CUT , :NEW.CASTING_DEDUCTION , :NEW.ACCOUNT_NO , systime , :NEW.CREATE_BY , :NEW.NOTE , :NEW.STATUS , :NEW.REMARK , :NEW.PERMIT_NO); stmt_var := 'Insert Cut Detail'; END IF; /* Insert record from staging table to Cut Item Table */ INSERT INTO CR_FIELD_CUT_ITEM (LAYOUT_NO , CUT_NO , SEQ_NO , CODE , LENGTH , WIDTH , DEPTH , DATE_WORKED , CREATE_DATE , CREATE_BY , NOTE , STIP_FACTOR ) VALUES (:NEW.LAYOUT_NO , :NEW.CUT_NO , :NEW.SEQ_NO , :NEW.CODE , :NEW.LENGTH , :NEW.WIDTH , :NEW.DEPTH , TRUNC(:NEW.DATE_WORKED) , systime , :NEW.CREATE_BY , :NEW.NOTE , :NEW.STIP_FACTOR ); stmt_var := 'Insert Cut Items'; /* This inserts record from staging to history table. */ BEGIN INSERT INTO CR_FIELD_CUT_HISTORY (LAYOUT_NO , PERMIT_TYPE , PO_NUMBER , HOUSE_NUMBER , SAWCUT , PLATED , COUNTY , STATE , WEST_MAP_ID , OPENED_BY_CONTR , PROTECTED_ST , COMPASS_POINT , STREET_NAME , ARTERY_TYPE , LEFT_CROSS_STREET , RIGHT_CROSS_STREET , SPECIFIC_LOC , EMER_PERMIT_NO , EMER_ISSUE_DATE , SERVICE_TYPE , PARKING_RESTR , RESTORE_REQD , CUT_NO , SHALLOW_FACILITIES , CUT_LENGTH , CUT_WIDTH , CUT_DEPTH , BASE_DEPTH , BASE_MATERIAL , SURFACE_DEPTH , SURFACE_MATERIAL , LANE , START_POINT , LINEAR_START_CUT , LINEAR_CURB_CUT , SHAPE , PAVING_REQUIRED , OPENED_DATE , EXCAVATION_DATE , BACKFILL_DATE , BASE_DATE , TRENCHING_DATE , BASE_MAT_REPLACED , COMBINED_CUT , CASTING_DEDUCTION , ACCOUNT_NO , SEQ_NO , CODE , LENGTH , WIDTH , DEPTH , DATE_WORKED , CREATE_DATE , CREATE_BY , NOTE , STATUS , PERMIT_NO , STIP_FACTOR ) VALUES (:NEW.LAYOUT_NO , :NEW.PERMIT_TYPE , :NEW.PO_NUMBER , :NEW.HOUSE_NUMBER , :NEW.SAWCUT , :NEW.PLATED , :NEW.COUNTY , :NEW.STATE , :NEW.WEST_MAP_ID , lot_cur.contractor_name , -- Get it from LOT Change Track 2010-4071 :NEW.PROTECTED_ST , :NEW.COMPASS_POINT , :NEW.STREET_NAME , :NEW.ARTERY_TYPE , :NEW.LEFT_CROSS_STREET , :NEW.RIGHT_CROSS_STREET , :NEW.SPECIFIC_LOC , :NEW.EMER_PERMIT_NO , TRUNC(:NEW.EMER_ISSUE_DATE) , :NEW.SERVICE_TYPE , :NEW.PARKING_RESTR , :NEW.RESTORE_REQD , :NEW.CUT_NO , :NEW.SHALLOW_FACILITIES , :NEW.CUT_LENGTH , :NEW.CUT_WIDTH , :NEW.CUT_DEPTH , :NEW.BASE_DEPTH , :NEW.BASE_MATERIAL , :NEW.SURFACE_DEPTH , :NEW.SURFACE_MATERIAL , :NEW.LANE , :NEW.START_POINT , :NEW.LINEAR_START_CUT , :NEW.LINEAR_CURB_CUT , :NEW.SHAPE , :NEW.PAVING_REQUIRED , TRUNC(:NEW.OPENED_DATE) , TRUNC(:NEW.EXCAVATION_DATE) , TRUNC(:NEW.BACKFILL_DATE) , TRUNC(:NEW.BASE_DATE) , TRUNC(:NEW.TRENCHING_DATE) , :NEW.BASE_MAT_REPLACED , :NEW.COMBINED_CUT , :NEW.CASTING_DEDUCTION , :NEW.ACCOUNT_NO , :NEW.SEQ_NO , :NEW.CODE , :NEW.LENGTH , :NEW.WIDTH , :NEW.DEPTH , TRUNC(:NEW.DATE_WORKED) , systime , :NEW.CREATE_BY , 'PROCESSED '||TO_CHAR(systime , 'MM/DD/YYYY HH:MI:SS'), :NEW.STATUS , :NEW.PERMIT_NO , :NEW.STIP_FACTOR ); stmt_var := 'Insert Cut History'; EXCEPTION WHEN DUP_VAL_ON_INDEX THEN NULL; END; /* This will insert/update the records in CR_FIELD_LAYOUT_STATUS */ OPEN STAT(:NEW.LAYOUT_NO); FETCH STAT INTO STAT_CUR; IF stat_cur.cdate IS NULL THEN /* Offset system date inserted by 1 second (SYSDATE+.00001) to prevent PK_LOT_STAT constraint from firing when the cuts are entered simultaneously with logs. */ INSERT INTO CR_FIELD_LAYOUT_STATUS (LAYOUT_NO, STATUS, CREATE_BY, CREATE_DATE, NOTE) VALUES (:NEW.LAYOUT_NO, 'AWAITING_COMPLETION', :NEW.CREATE_BY, SYSDATE+.00001, 'Cut Inserted by Field Personnel '|| to_char(SYSDATE+.00001,'MM/DD/YYYY HH:MI:SS AM')); stmt_var := 'Insert Layout Status'; ELSE UPDATE CR_FIELD_LAYOUT_STATUS SET CREATE_DATE = SYSDATE , NOTE = 'Cuts Updated: '|| to_char(SYSDATE+.00001,'MM/DD/YYYY HH:MI:SS AM') -- CT 2009-5511 09/10/09 Removed concatenation WHERE LAYOUT_NO = :NEW.LAYOUT_NO AND STATUS = 'AWAITING_COMPLETION' AND CREATE_DATE = stat_cur.cdate; stmt_var := 'Update Layout Status'; END IF; CLOSE CUT; CLOSE DET; CLOSE DTN; CLOSE ITM; CLOSE LOT; CLOSE STAT; CLOSE UNA;--added for cha 2011-3172 6/14/2011 /* When exceptions are raised, the users will be notified for the failure. */ EXCEPTION WHEN OTHERS THEN err_msg := SQLERRM; INSERT INTO CR_FIELD_ERROR VALUES(:NEW.LAYOUT_NO, ' Cut No.: '||:NEW.CUT_NO ||' Item No.: '||:NEW.SEQ_NO, SYSDATE, err_msg); /* conn:= utl_smtp.open_connection( 'EXCHSMTP.coned.com'); utl_smtp.helo(conn, 'coned.com'); utl_smtp.mail(conn, '[email protected]' ); utl_smtp.rcpt(conn, '[email protected]' ); utl_smtp.rcpt(conn, cc_recipient); mesg:= 'From: Cut Staging After Insert <[email protected]>' || crlf || 'Subject: CR_FIELD_CUT_AFTER_INSERT Trigger Failed (Testing)' || crlf || 'To: Harsha <[email protected]>' || crlf || 'Cc: ' || cc_recipient || crlf ; mesg:= mesg || '' || crlf || msg_body || ' Layout No.: '|| :NEW.LAYOUT_NO || ' Cut No.: ' || :NEW.CUT_NO || ' Item No.: ' || :NEW.SEQ_NO || ' **ErrorMessage** '||err_msg||' Error found after this statement: '||stmt_var; utl_smtp.data( conn, mesg ); utl_smtp.quit( conn );*/ --6/24 conn:= utl_smtp.open_connection( 'EXCHSMTP.coned.com'); utl_smtp.helo(conn, 'coned.com'); utl_smtp.mail(conn, '[email protected]' ); utl_smtp.rcpt(conn, '[email protected]' ); utl_smtp.rcpt(conn, cc_recipient); mesg:= 'From: Cut Staging After Insert <[email protected]>' || crlf || 'Subject: CR_FIELD_CUT_AFTER_INSERT Trigger Failed (Testing)' || crlf || 'To: XYZ <[email protected]>' || crlf || 'Cc: ' || cc_recipient || crlf ; mesg:= mesg || '' || crlf || msg_body || ' Layout No.: '|| :NEW.LAYOUT_NO || ' Cut No.: ' || :NEW.CUT_NO || ' Item No.: ' || :NEW.SEQ_NO || ' **ErrorMessage** '||err_msg||' Error found after this statement: '||stmt_var; utl_smtp.data( conn, mesg ); utl_smtp.quit( conn ); END;
It's just a guess,
what you the sliders are open regardless of any condition, for example;
OPEN CUT(:NEW.LAYOUT_NO); OPEN DET(:NEW.LAYOUT_NO); OPEN ITM(:NEW.LAYOUT_NO); OPEN LOT(:NEW.LAYOUT_NO); OPEN DTN(:NEW.LAYOUT_NO, :NEW.CUT_NO, :NEW.NOTE);
UNA is however open after a condition;
IF DTN%NOTFOUND THEN /** start --added for cha 2011-3172 6/14/2011 **/ OPEN UNA(:NEW.LAYOUT_NO, :NEW.ACCOUNT_NO);
All in sliders however closed without worrying, that is, they are all suppose to be open;
CLOSE CUT; CLOSE DET; CLOSE DTN; CLOSE ITM; CLOSE LOT; CLOSE STAT; CLOSE UNA;
So I think you close the wen of cursors UNA this is indeed not to open.
So, pass the "NARROW UNA"; line of code before the END IF; on line 278, since that's when it will definitely be open. -
ORA-01843 a month not valid error
Hi all
We did an upgrade of database 9.2.0.1 to 11 GR 2 and after that everything works fine.
But now, we noticed that the users get to the ORA-01843 a month not valid error.
I changed the NLS_DATE_FORMAT in the init.ora file, but still the error persists.
As a work around, I changed the NLS_DATE_FORMAT = DD-MM-YYYY on the registry of client PCs and now its works in this pc...
Is there another way change receives in the world?
Advice
Thanks in adv,
MaheshMahesh says:
Hi allWe did an upgrade of database 9.2.0.1 to 11 GR 2 and after that everything works fine.
But now, we noticed that the users get to the ORA-01843 a month not valid error.
I changed the NLS_DATE_FORMAT in the init.ora file, but still the error persists.
As a work around, I changed the NLS_DATE_FORMAT = DD-MM-YYYY on the registry of client PCs and now its works in this pc...Is there another way change receives in the world?
Advice
Thanks in adv,
MaheshNLS_DATE_FORMAT can be set in several places, but this isn't either / or situation. Put in an init level db parm is the parameter most WEAK. This parameter is substituted by the client OS, which in turn, can be overridden by a SESSION of ALTER, which in turn, can be overridden by the use of the TO_CHAR TO_DATE to the individual sql statement. and if the date is entered by a human being to a keyboard (in fact to key in, not picked a calendar tool or a kind of drop-down selection list) you have really no direct control over the format of the string they capture. So ultimately it's on-demand to ensure that strings as dates are in the correct format.
That's why I advise developers to ALWAYS use to_char and to_date at the sql statement level. It's the only way they can ensure control over the setting.
-
Instance not valid error then take out the screen
Hi friends
I am doing a simple demo of screen Sharing.but it will give me the instance not valid error when I sign on to any editor screen, I mean when you go to subscribe to any screen through an error named
Invalid instance.
at com.adobe.rtc.session.managers::SessionManagerBase/receiveError() [C:\work\main\connect\co como\src\com\adobe\rtc\session\managers\SessionManagerBase.as:352]
at com.adobe.rtc.session.managers::SessionManagerFMS/receiveError() [C:\work\main\connect\coc omo\src\com\adobe\rtc\session\managers\SessionManagerFMS.as:308]
at com.adobe.rtc.session.managers::SessionManagerAdobeHostedServices/receiveError() [C:\work\ main\connect\cocomo\src\com\adobe\rtc\session\managers\SessionManagerAdobeHostedServices.a s:271]
at com.adobe.rtc.session.managers::SessionManagerAdobeHostedServices/onMeetingError() [C:\wor k\main\connect\cocomo\src\com\adobe\rtc\session\managers\SessionManagerAdobeHostedServices .as:111]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.session.sessionClasses::MeetingInfoService/onStatus() [C:\work\main\connect\ cocomo\src\com\adobe\rtc\session\sessionClasses\MeetingInfoService.as:457]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/redirectEvent()body guides me why does this happen and how to solve the it.shoould I put through different in key can sign the application?
Thanks and greetings
Vineet Osho
Hi Aditya,
You should not need to use a shared secret for 2 apps running - it's
specifically for external authentication. All you need is 2 applications,
both have the same roomURL. An application can have the publishing server, the
others may have of the Subscriber. I suggest that you spend some time to read the
LCCS Developer Guide, or listen to the video tutorials we provide.
hope that helps
Nigel
-
NB305: Windows is not valid error code 0xc004f063
I have a Toshiba NB305 mini computer laptop pll3ac-00f014
When I got there, it was quite dead. rather than post the screen.
There a charge light when pluged. Tested as meny parts as I could. Motherboard left not good. Got a reman mobo successor cell Alto works now.Formatted the hard drive reinstalled windows media active fine microsoft starter edition.
I wanted to use the original to much bloat ware image.So there have been running for a few weeks comes your copy of windows is not valid with an error code 0xc004f063 "the software license service reports that the BIOS is missing a license required.
How to work around this problem?
Thanks in advance for the help.
Hello
As far as I know, this message appears because you have installed a version of the Windows operating system and the system was not properly activated.
You said that you have installed a new Windows system using the disk from Microsoft.
So use the key belonging to this system of Windows:Try to uninstall and reinstall the product key and check if this may help.
1) click Start and type CMD in the start search box.
(2) select run as administrator.
(3) in the shell, type the following command and press ENTER after each command.slmgr-upk
slmgr-ipk (your product key)(4) to activate the copy again and check if it works.
-
Hey everybody,
My HP Pavilion G6 - 1164sa is coming up with an error "Hard drive not found" at the start up. It also makes a clicking sound. have you tried another hard drive to an old laptop in its place and the works, but because it is not the correct drivers installed for this model most things do not work. Need a solution to this? can I order a new hard drive for hp with all the drivers installed?
Your drivers are posted on your support page > HERE
You can order a hard drive at HP, but it will be a hard drive Virgin, as well as a new hdd retail except at much higher prices. I would like to replace the hard drive with a > hdd retail.
If you plan to use recovery disks to reinstall Windows & software/drivers have one that is at least as large a capacity than the original, may be larger, but not smaller. If you have not written a set of recovery discs, you can usually order from HP for a small fee.
If you can read the Windows 25-character license key attached to the bottom of the laptop there is possibility to download an ISO file, burn it to DVD and install Windows. Then you need to download your drivers on the support site. (Any size hard disk could be used with this option)
-
Backup configuration is not valid error code 0 x 81000029
HI tried to set automatic back up Windows vista home Premium allows me to get so far and then I get the backup configuration is not valid, review your backup settings. Tried to change the dates and times to run upward but the same answer. Please can someone help?
HelloThis problem occurs when you click on save files in the backup Center dialog box and restore, then you select the hard drive as the location to save the backup.
This problem can also occur if you have an EISA partition that is marked as active on the hard drive.
To resolve this problem, try the steps in the "RÉSOLUTION" section and check the result: http://support.microsoft.com/kb/950167
I hope this helps.
Kind regards
Syed
Answers from Microsoft supports the engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
HP envy 5532: message key not valid error when you try to download the software
I can't download my desire 5532 keep getting error message (key not valid for use in specified state).
This problem is related to Microsoft Update KB2918614
The solution is to remove this update.
How to remove an update for Windows Vista
If the fix works, I recommend that you 'hide' it so that it not be reinstalled automatically.
Instructions below:
If you don't want Windows to install an update, you need to hide.
Open Windows Update by clicking on the button start . In the search box, type Update, and then in the list of results, click Windows Update.
In the left pane, click Find updates.
When Windows finds updates for your computer, do one of the following:
Click the link that tells you important updates are available if you have some updates to hide.
Click the link that tells you optional updates are available if you have optional updates to hide.
Do right click the update you want to install, and then click Hide update. The next time you check the updates, the update will not be automatically selected or installed. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
-
Serial number is not valid"" error
I have an activated version of first Pro CS5.5 installed on a new laptop. I installed CS6 bought DVD that had no serial number. No, I get the error "serial number is not valid" and the CS6 runs as a trial version. How will I know what is the serial number? I tried the support phone support but just get put on hold - for as long as I care to wait!
Thank you shooternz for the idea. I finally got this sorting. Of course, I had to get an email giving me a link to the Adobe licensing website (never heard before!) This gives me the serial number I was supposed to take CS6 exit the mode of trial. Only about 25 hours wasted on this!
Maybe you are looking for
-
Hello I have a NI PCI-6014 card with a card BNC 2120 DAQ and Labview 8.6. I'm trying to transmit digital signals, but only the digital IO port $line0 responds to my orders, while lines 1 to 7 don't work at all in Labview. With the measurement and Aut
-
Hello I am an intern and I have a problem with my system. I send information between a PCB to my computer. I send in my frame, a float to a string format and I would like to do the conversion in LabView to show the correct value. For example, there i
-
I have a few files that were infected so I deleted them. Now, I don't have any what volume in my system please help or direct me to a program that I have to reinstall thanks in advance!
-
need to know how to remove the administrator and old password admininstator
I bought an old lap top for sale yard is unable to make any changes until there are changes in administator to remove the old adminastraor and password even load my copy of xp
-
How do I would return a video that has the sound without completely removing the sound?
Ive tried to do this in movie maker, but it takes away the sound, and I don't want that. Help?