Driver audio virtual Satellite A100 (PSAAC) install error

Similar Questions

• Do not know how to install the driver LAN for Satellite A100-787

  The driver LAN for Satellite A100-787 is delivered with no configuration file and windows hardware installation does not recognize.

  I don't know how to install it... Any help?

  Hello

  I guess you are trying to install the driver LAN WXP because Vista LAN driver is not available. Am I wrong?

  In any case:
  -Create a new folder on your desktop
  -extract all downloaded files here
  -Open Device Manager and right-click on device unknown you want to install
  -choose Properties
  -find the Install driver button
  -Click on it and go to the new folder created
  -Follow the on-screen menu

  I hope that you can install to ti the pilot FTAs.

  Good bye

• How to replace the hard drive on the Satellite A100-301?

  How to remove the old hard drive (deceased) and replace it with a new hard drive on the Satellite A100?

  I don't see that there is a harddiskbay that is easily accessible.
  Do I have to take off the whole backcover?

  Hello!

  On the bottom side of the laptop's HARD drive cover is fixed with a screw.
  Remove the screw and cover, then you can exchange the HARD drive.

  Good bye

• Re: Cannot install Win7 driver display for Satellite A100-159

  Hello world

  I have a problem with my old laptop satellite a100-159. I still use it as a second computer. Given that the display drivers for windows 7 are available at toshiba, I decided to update the laptop from XP to 7. After the update, I downloaded the display driver for win 7 (http://support1.toshiba-tro.de/tedd-files2/0/display-20091109135931.zip)

  But here's the problem: when I unzip the file, the file "tinstall.exe" does not work. It comes to the .exe file that needs to install the driver. I also had the message "this program could not have installed correctly". As of the present results, I'm looking to 1024 x 768 while the resolution is 1280 x 800.

  Any suggestions for me? I know that the laptop is old, but that the correct display driver, it is rather useless.

  Jeroen

  Please try to run the install using setup.exe.

• Cannot install latest ATI mobility Radeon x 1600 display driver for my Satellite A100

  Hello

  My Satellite A100-704 PSAA9E is equipped with the ATI Mobility Radeon X 1600 graphics display card, that ATI provides a new driver, named Catalyst 8.3. My problem is that when I run the verification software, I get a message telling me that this driver is not suitable to be installed on my system.

  Is any information available on this subject? I always install the new Catalyst driver or it's better if I do not have? Oh, the current driver, I have running on my laptop is the one downloaded from the Toshiba site, 8.292 I believe.

  Any information is appreciated. Thank you very much.

  It is well known that laptop to the manufacturer is responsible for the support of driver on laptop computers. You're not the first person is facing this problem. To be honest, it is not the problem. The fact is that the laptop manufacturers use updated drivers to protect the equipment.

  Because of this I recommend you to use the Toshiba drivers only.

• Cannot install graphic driver on my Satellite A100

  I have the Satellite A100 with a mobility radeon X 1400 and it is impossible to change the graphics drivers: I'm stuck with the old version 6.14 and failed to install the new drivers ATI 6.7 or 6.8 :(

  Anyone have a solution?

  Thanks in advance

  Hello

  In general, the drivers available on the graphics card manufacturer s site are mainly designed for desktop computers and it is always recommended to use the drivers designed by producer for laptop. On this way the graphics card will be protected against overheating and suddenly get compromised.

  In any case, you can try to install it as shown in the previous announcement.

• ConfigFree on Satellite A100-413 Setup error

  Helle everyone,

  I just removed the notebook Windows XP MCE of mij forum, Francois, it's that I don't want any stuff-tools than thosiba on my laptop.

  So I installed windows XP Pro LEGAL. All the drivers are working perfect but miss me one tool of Toshiba.
  It is his network manager, whireless, bleutooth etc. which apears right at the bottom of the screen (this isn't a system tray icon)

  Now if I whas fix included in configfree (or confree)
  So thinking, I downloaded the zip and run the insite facility there.

  The result is an error "the installation image is not correct.

  All knows how to get this Setup working of our get this program I whas talk on my computer?
  Excuse me for my bad English

  You talk about the Toshiba Configfree application.
  I don't know why the Setup error appears, but I wouldn't reinstall this tool m.
  You can find it on the page of the Toshiba driver A100 section.
  But there are 3 different satellite A100, so be sure that you have chosen the right way.
  After removing the BONE in addition Configfree & remove programs, you must restart the unit, and then you try to install it again.

• Satellite A100 - unrecoverable system error and restart

  Without warning my Satellite A100 don't close but reboot, I removed the auto reboot, and the error that is displayed in the BSOD is:

  STOP: c000021a {fatal system error}
  The Windows Logon Process system process ended unexpectedly with status 0xc0000000 (0x00000000 0 x 0000000)

  in the event where Viewer does not appear anything on the error, I tried a system restore but it cannot exercise, in the event viewer this time it is written that he cannot run because the PC is not turned off regularly,
  How can I do?
  The BSOD appear in the last stop after the color screen when turned on the black screen just before the
  Turn off the power.

  your
  Fabio

  Hi flottero,

  It of always a little difficult to discuss these blue screens because many things could be the reason, but in most cases it s a hardware or driver problem.

  If system restore doesn't work, can you try to restore Windows recovery disk settings, please? After that, you get back factory settings and so you can identify a hardware problem or software.

  Check this box!

• Satellite A100 - re - install Win XP

  I have another Satellite A100 (PSAA2E) in which I upgrade the hard drive as the current is too small and slow.

  I have the cd - key stuck at the bottom of the laptop, but I wanted to know I will be able to use a disc windows xp home SP3 install or do I need a disc of xp without service pack home?

  Hello

  It s advised and recommended to use a Windows XP disk that includes at least SP2.
  If your Win XP disk is not contains SP2 or SP3, then you could create a clean Win XP disk and could include service packs using nLite.

  Google for nLite in order to get more details about this nice tool.

• Need driver network for Satellite A100-233

  I just did a reinstall of Windows XP Home on a Satellite A100-233 bought in the Middle East. I have downloaded Intel chipset, then looked up some network driver, the only one that I found that I downloaded (zip file) when I opened there was no facility or the executable file.

  Can you please post the URL for the network driver and all the other necessary drivers for a new installation?

  Thank you

  PS: by the way search gave 0 results whenever I used it.

  You n t need any exe file to install the LAN driver.

  The LAN driver can be installed via the Device Manager. Here, you just mark the unknown device located in the network controllers and point the installer to the place where the LAN driver files have been decompressed.

  All that s.

• Can not find the driver LAN for Satellite A100-165

  Hello

  I have a Satellite A100-165 but he doesn t have installed the Ethernet drivers. I tried to find this driver in the download section, but without success.
  Any help would be appreciated.
  Thank you!

  Hello Juan

  Follow these steps:

  Open http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp and choose

  Type of product > NOTEBOOK
  Family > SATELLITE
  Product series > SATELLITE A SERIES
  Model > SATELLITE A100 (PSAA9)
  Operating system > Windows XP
  Driver type > LAN Driver

  Three drivers will be there. I recommend you to install the latest amended version.

  Good bye

• Satellite A100 - cannot install VAP - ID_ERR_NOTINSTALLTVALZ_MESSAGE

  I got a Satellite A100 (PSAA9E)
  I downloaded Toshiba VAP for vista from the Toshiba homepage.
  When I try to install it, I get this error:

  ID_ERR_NOTINSTALLTVALZ_MESSAGE

  Can someone help me get PPV on my Satellite to use the FN buttons?

  Hello

  The VAP can be installed only running Vista OS and also the BIOS should be updated too.
  I read a few threads on a similar problem and after BIOS update the VAP was able to install.

  Check it!

• Satellite A100-590: PXE error at the start of the CD

  Hello

  After searching for hours on google and other places without finding any helpful response, I decided to ask here. I hope someone here can help me out.
  I have a Toshiba Satellite A100-590, and I am trying to install Windows XP Pro SP2 MSDNAA from a cd. But whenever I try to boot from it, I get the following error message:

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.

  and it starts the already installed Windows XP Home Edition. On several boards of people say that this is caused by the boot loader tries to start from a network and not being able to find a server to boot from. I tried all the stuff like setting up LAN to the last item in the startup list, but nothing helps... any suggestions?

  Thanks in advance.

  Hello

  The PXE error occurs if the device tries to start first on the LAN.
  I put t know how you boot from the CD, but I recommend to change the boot order in the BIOS. LAN Boot option must be set at the end of the order and the CD at the beginning.

  Check it out.

• Can I replace the hard drive of my Satellite A100?

  I have a Satellite A100 - 033 PSAANE, running Windows Vista Home Basic Edition. The hard drive is 60 g. I save almost all of my data to an external hard drive, but nevertheless hard drive eventually won't have enough space for the growing number of programs that I have installed various temporary files, etc.. For example, I would like to install VirtualBox and run XP (Ido have a copy), and Linux and perhaps a few other systems operating within it, but that is likely to consume more of hard drive space I have available.

  Anyone know if it is possible to get out of my existing hard drive and replace it with another of higher capacity? Is this possible?

  I need to reinstall Vista on the new disc, from the emergency disk that came with the PC. I don't mind this, but will be Windows Vista "recognized" when I try to install the new hard disk?

  Sorry if these questions seem naïve, but I don't know how to put a new hard drive in a laptop computer, or even if it is possible. I bought the Toshiba in February 2007, which was just after Vista had been released. I had not given the choice of XP: Vista was the only Toshiba operating system provide at this time. I was assured that a 60G hard drive would be perfect for Vista, but I have to tell you that, in my opinion, that I was wrongly advised, and that Toshiba should never have released a 60G machine for use with Vista. Where my wish to have a hard drive with a larger capacity.

  Yes, you can install a larger capacity HARD drive. In my view, the A100 can take any size SATA 2.5 "HDD, so you should be able to successfully install a 250 GB or 320 GB.

  In terms of Windows, you can reinstall using the Toshiba Recovery disk came with the laptop.

  Directions for use:

  Remove the screws from the cover of the HARD drive based on the laptop to access the HARD disk.
  Pull the HARD drive out
  Transfer media cradle of HARD drive to the new HARD disk
  Slide in the new HARD drive and screw the cover of the HARD drive.
  Turn on the laptop and press F12 to access the start menu.
  Insert your recovery disk and choose CD icon to boot from it.
  Follow the prompts to install Windows.
  Connect your original HDD to the A100 using a USB adapter to restore your files/documents.

  PS. Don't forget to back up your important files regularly. HARD drives can fail at any time, since they have delicate moving parts, even when new.

• Satellite A100-998: continue Error Message «Power surge on USB hub»

  Hello world.

  I am the new owner of a Satellite A100 laptop that has a little problem.

  When the laptop goes into mode and the monitor shutsdown, energy saving when I turn on the computer again, I always get an error message will appear in the system tray. The message says: peripheral USB A "Power surge on Hub Port" exceeded the limits of its hub port power. To solve the problem, click this message.

  First of all, I have 4 USB ports, but NONE of them are used. There's nothing attached to the laptop at all.
  Secondly, when I click on the box, I get 5 unknown USB devices shown with the yellow question mark next to them in the list and 3 unused ports, which seem to be ok, with no yellow question mark.

  Why is happening, with no device attached, or even installed on the laptop.

  Your help to solve this problem will be more appreciated.

  Rgds
  Neil.

  Hello, Neil

  What model of laptop you have exactly (A100-xxx)?