Driver Brother MFC 9880

Similar Questions

• Problem install driver Brother MFC 8300 (using Windows Update)

  I need help for my printer to work with a new installation of Windows 7 Home Premium 64-bit.  I had to reinstall due to a CMOS error, I think it was because of a dead battery.  It could even be something else because I had other problems with this facility (explained below).  In any case, the printer is a former Brother MFC 8300 (he was a workaholic!).  Past times, I have re-installed Windows, there have not been any problems with this printer.  I just install Windows Update driver (the driver is named 'Brother MFC8600/9650 Series' in Device Manager).  But this time the installed "Windows Update" the driver and says that everything is working properly but when I go to "Devices and printers" it does not appear in "Printers and faxes" (as he usually does).  FYI, there is a list for "USB Composite Device" in "Devices" that shows "Brother MFC8600/9650 series" as a scanner.  Don't know what that means.

  I also tried to manually download the driver of 'catalog.update.microsoft.com '.  I downloaded 2 different versions of the driver.  It has a size of 2.0 MB file and the other has a 2.3 MB file size.  I found myself by installing do not either because I didn't know where the appropriate destination location has been using the 'Expand' of the 'Command Prompt' command with "expand -F: * " ."  I think that the file for the "Windows Update" file size is 2.1 MB (my memory is not the biggest however).

  I am running as a "Standard user", but I installed all the drivers of devices as an administrator.  I also noticed a problem with an application that I used before this re - install, "Ultracopier.  On installs previous he has installed fine and he demanded 'Administrator' rights after the start.  But during this installation, it did not work at all and did not 'Administrator' rights after the start.  I also had problems with a 2 to external hard drive related to the permissions and access to certain files and folders.  I don't know if any of this matters but I thought that the more information the better.

  I hope someone can help me with this because I really need this printer to work.

  Hello

  Sorry for the late reply.

  I suggest that you restart the Printer Spooler service and see if that fixes the problem.

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  Please follow the steps below:

  You must be logged on as administrator to perform the following steps:

  1. By clicking the Start button, click Control Panel, open administrative tools. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Right click on the print spooler service, and then click Properties.
  4. Under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  If you are still facing problems while using the printer, I suggest to uninstall the driver again and install all the optional updates offered by Windows Update and then install the printer drivers if not included in the optional updates and see if the problem persists.

  To install optional updates, follow the steps below:

  1. Press the Windows key + R
  2. Type wuapp
  3. In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer
  4. If updates are found, click on view available updates.
  5. Select the optional updates, and then click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Hope this helps, get back to us if you need further assistance for Windows.

• Update driver Brother MFC 210 c - window 7 Home Premium

  Hello

  I just updated my computer from Windows Xp to Windows 7 Home Premium. I can't find the dirvers for my Brother MFC 210 c. I even drive, but the computer does not hired the legacy. I think the printer works on 32 bp as opposites tp 64bp. I used Windows update to see if my printer would come to the top, but it didn't. Can someone help me?

  Thank you!

  Hi AleDeb,

  I had the same problem and spent the last 2 + hours to understand.  After much research I could not find a driver specifically for Windows 7 so in my frustration, I downloaded the driver for Vista and it worked.  You can find it here: http://welcome.solutions.brother.com/BSC/public/agreement2.aspx?c=us&lang=English&prod=mfc210c_all&osname=win_vista_x64&viewmode=0&guid=11a8160e-fb29-4c94-bce4-d88bc89e3cbd&dlid=dlf003430&flang=8&dlfileseq=2.  Click on I accept and save it somewhere where you will be able to find it.  After it downloads the file, open it and extract it.  It will save you all that is in the same place.  Then, go to the--> hardware control panel and sounds--> devices and printers.  Click on "add a printer".  After that the printer is highlighted and click Next.  He will try to find the driver automatically but will not be able to.  After a failure, click ok, and navigate to the location where you have unpacked just the files.  It should work.  It worked for me.  Let me know if it works for you.  Good luck!

• Brother MFC-J430W all-in-One printer driver

  need a driver to be able to print photos from my windows picture program. What should I do?

  Drivers for Brother MFC J430W are available on the brother Support site.  The printer driver from a 'windows picture program"would normally be the same driver, the printer needs for all printing.  The reader can be downloaded from: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=mfcj430w_all

• Where to find the Brother MFC-210 c printer driver

  I need the printer driver for Windows 7 for operating printer Brother MFC - 210 c

  Brother has no Windows 7 for the MFC 210 c printer drivers. The most recent are for Vista.

  You can try the Vista drivers in compatibility mode:
  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_top.html?reg=us&c=us&lang=en&prod=mfc210c_all

  Troubleshoot Compatibility

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs may not be able to run in Windows 7.

  More information on how to make older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Or:

  If the manufacturers website has no drivers for Windows 7, try to use Windows Update to install the printer drivers:

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Try the printer Troubleshooter

  1. click the Start button, then click on Control Panel

  2. in the search box, type troubleshooting

  3. then click on troubleshooting

  4. under hardware and sound, click "use a printer.

• How can I get Windows 7 driver for Brother MFC-9800?

  Windows 7 has stopped recognizing my Brother MFC-9800 as a scanner. How to get Windows 7 driver for Brother MFC-9800?

  Have you tried brother?

  http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/DLF/download_top.html?reg=us&c=us_ot&lang=en&prod=mfc9800_us

• Brother MFC-L27000DW do not wake on print

  Just bought a Brother MFC-L27000DW and have problems make him wake up when printing to it.

  I have a Windows7 machine and it seems to have no problem to wake the printer to sleep deep whenever I have something down the print queue send to her. El Capitan however doesn't.

  I downloaded the latest drivers from brother and can get the printer to work if I put it off and then on again. But I can't seem to print from El Capitan by sending something to the queue printing after that he went to sleep.

  I wireless print and there is no wifi connection problem because it works very well after completing the printer.

  Update for this. After having frustrated and entertaining the idea of returning to the printer, I called brother support.

  They walked me through the process of updating the firmware on the printer and now everything works normally.

  Impression of something of El Capitan it will send to the queue printing and the printer will wake up from deep sleep and print normally.

  Everything is good.

  In case anyone want to know the details, you can press on the ' *' and ' # ' at the same time the keys on the keypad of the printer and see your firmware version. My long string of digits began with an 'H' and the latest driver from 11.1.2016 is 'J '.

• Brother MFC 7820N does not work after upgrade to El Capitan

  I installed my OS to El Capitan. My multifunction Brother MFC 7820N printer was working perfectly before the upgrade. Now, I get an error message indicating that the printer is not connected, even though it is. He is unresponsive to the print command, and I can't find new compatible drivers on the Brother site. Any suggestions?

  If you haven't already done so, try to reset the printing system.

  Reset the printing system - OS X El Capitan

  You may be able to find a driver here.

  Gimp - Print

  HPIJS for Mac OS X

• I can't on my Brother MFC-9325CW printer - everything comes back as a mistake and remains in the queue

  I installed my printer Brother MFC-9325CW, and it will not be printed.  Whenever I send a document to the printer, it reads like a mistake and remains in the queue as an error.

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Printer Brother MFC 210 unable to clean.

  Message on the screen-impossible to clean.

  Hello

  Check with the support of brother, their documentation online and drivers. OEM brother is responsible
  for the proper functioning of the printer and their drivers provided.

  Brother - MFC-210
  http://www.brother-USA.com/SiteSearch.aspx?SK=MFC%20210

  Brother - MFC-210 Support
  http://welcome.solutions.brother.com/BSC/public/us/us/en/model_top/colormfc/mfc210c_all.html?reg=us&c=us&lang=en&prod=mfc210c_all

  Brother - Download graphics driver
  http://www.brother-USA.com/LP/windows7compatibility.aspx

  If this does not help, then you should contact the Support of brother.

  Brother - Support
  http://www.brother-USA.com/support/

  =============================================

  These can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Brother MFC - 290C stopped printing

  My Brother MFC - 290C ceased to print. It was fine until last night. I have not used for 2-3 weeks. It's by offline, and even if I tried all the things on the brother site it won't work online. My inks were empty, and it did not show on the computer may be because it is offline. I changed and he has not made a difference. I have a 64-bit computer. Troubleshooting does not either.restarting the computer and the brother doesn't have to be. When I troubleshoot it indicates an error [not numbers] and it was fixed - it says that it is in the queue for the printer, but there is nothing there. One of my ink began to flow a key on paper. How to run again?

  Hello

  Check with the support of brother, their documentation online and drivers.

  Good luck, you need to update or reinstall the latest driver.

  Brother - MFC - 290C
  http://www.brother-USA.com/downloads/default.aspx?ProductID=MFC290c&ProductGroupID=5

  Brother - Download graphics driver
  http://www.brother-USA.com/LP/windows7compatibility.aspx

  If this does not help, then you should contact the Support of brother.

  Brother - Support
  http://www.brother-USA.com/support/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• All-in-one printer, Brother MFC-9700

  I have a new laptop that has a Windows 7 operating system.  It does not recognize my printer Brother MFC-9700.  I found a site that appears to let me do a free download - but for compatibility status, he asks if I have a 64-bit or 32-bit system.  How can I determine that?

  In addition, I don't want to crush by current drivers that work with my old computers.  This download may be a driver separately on my printer?

  I want to make the download of my new laptop - or just use my old computer to download the Windows 7 driver for the printer.  Access to the laptop is via a wireless router only.

  Any suggestions/step by step directions about the conduct of a download would be useful.  I'm a Novice Senior.  Will be

  I have a new laptop that has a Windows 7 operating system.  It does not recognize my printer Brother MFC-9700.  I found a site that appears to let me do a free download - but for compatibility status, he asks if I have a 64-bit or 32-bit system.  How can I determine that?

  In addition, I don't want to crush by current drivers that work with my old computers.  This download may be a driver separately on my printer?

  I want to make the download of my new laptop - or just use my old computer to download the Windows 7 driver for the printer.  Access to the laptop is via a wireless router only.

  Any suggestions/step by step directions about the conduct of a download would be useful.  I'm a Novice Senior.  Will be

  How do you know if you have Windows 32 or 64-bit

  Start > right click on computer

  Select Properties

  Under system, you will see listed Windows 32-bit or 64-bit

  32-bit applications can run on 64-bit systems, but not vice versa

  When you run older applications, you should consider the installation of XP Mode with Virtual PC for Windows 7 (free)

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  It's as easy as 1-2-3

  Update of Brother MFC-9700 downloads - I suggest that you always go here looking for drivers.  You want to maybe create a folder and make the backup copies of the software.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_top.html?reg=us&c=us&lang=en&prod=mfc9700_us

• New Driver for MFC-4800 for Window Vista 64-bit?

  Hello
  How can I get my printer Brother mfc 4800 to print using Windows Vista 64-bit.  The printer is connected by usb cable and the machine is recognized by the computer.  It appears in Control Panel > printer folder.  When I choose printer and each attempt a test page or print a document the printer "ramps" upward as it wants to print but nothing prints ever.  This printer is connected to a computer, that I just replaced that had XP as an operating system.   Printer drivers claim to be "integrated" in Vista. I call brother and they say he works at their end, there is something missing on the microsoft side.  If you the new driver or support can you pls send.

  I hope someone can help. Thank you.

  Got

  http://welcome.solutions.brother.com/BSC/Public/Templates/DownloadTop.aspx?NRMODE=Published&NRNODEGUID=%7b44CBEF26-F458-4FEF-B683-5F7B6D26AF08%7d&NRORIGINALURL=%2fbsc%2fpublic%2fas%2fau%2fen%2fdlf%2fdownload_top%2ehtml%3freg%3das%26c%3dau%26lang%3den%26prod%3dmfc4800_as&NRCACHEHINT=NoModifyGuest&prod=mfc4800_as®=as&c=au&lang=en

  Above is the link for your model printer MFC 4800 drivers.

  If you click on drivers in STEP 1, then STEP 2, check for the operating system, you will see that Vista is not an option, and so the Vista drivers were never written for this model of printer by brother.

  They rely on drivers XP to do the work for them.

  Brother is the one who wrote the drivers for its hardware, not Microsoft.

  I suggest that revisit you brother and ask them when they wrote the so-called Vista compatible drivers for Microsoft.

  It's all brother wrote for your model:

  MFC-4800 > downloads

  Downloads

  Manuals

  Frequently asked questions & troubleshooting

  Utilities/Windows Vista®

  Resolution improvement tool scan (WIA)

  Language	Version	Size	Release Date	File
  English	B	0.06 MB	03/05/2007

  Version B

  Version A

  This tool will expand the capacity of maximum scanning resolution and allow you to scan legal-size documents. Depending on your environment PC, the utility is available only in English, but will work with a PC configured or installed with a different language.

  1. Create a temporary directory on your drive HARD to save the downloaded file, for example C:\bront
  2. Start the download.
  3. Once the download is complete, double-click the downloaded file to extract it.
  4. Double-click the file "BrScUtil.exe".
  5. Select a WIA device, resolution and scan size and click on 'OK '.

  See you soon. Mick Murphy - Microsoft partner

• Brother MFC-7420 does not appear on the Device Manager

  I run a Brother MFC-7420 on Windows Vista - do it for a few years. Last week, it stopped printing in the middle of a report. When I print, it shows Status: Error. I did that the USB is correctly plugged at the end of the printer and hard drive. I uninstalled, rebooted and reinstalled the driver software. The installation will not accomplish when I reconnect the USB hard drive according to the instructions. The printer does not appear in Device Manager - is usually present in the other devices folder, but who is absent too. Other thoughts?

  Found a solution to the problem - had to install with a USB port - see below:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/4cae5aad-0ca0-431f-8774-70b9842baaf2

• My Brother MFC-7840W is taken offline.

  My Brother MFC-7840W is taken offline. I have a wireless network using windows 7 and a cisco wireless router.

  A few times just go offline.  How can I get online? or why it is happening?

  Hello

  1. when exactly you get this error message?

  2. don't you make changes to the computer until the problem occurred?

  3. What is the number of brand and model of your printer?

  I suggest you try the steps from the link below and check if it helps.

  Method 1: Try to follow the steps below and check if it helps:

  a. open the start menu, click Control Panel, and click on the "printers and faxes". This will open a window with a list of the printers currently installed on your computer.
  b. double-click the icon of the printer that you want to change online. It will open a pop-up window describing all current print jobs.
  c. go to "Printer" in the menu bar of the pop-up window and uncheck "Use printer offline." This action will change the printer from offline to online mode.

  Method 2: Try to run the fix it from the link below.

   http://support.Microsoft.com/kb/2027593

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 3: If the problem persists then uninstall and reinstall the driver of printer on your computer from devices and printers and programs and features.

  Step 1: To uninstall the driver scanner devices and printers:

  a. click the Start button, select Control Panel and click on devices and printers. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. right-click on the printer driver, and then click Properties.

  c. on the device properties dialog box, click the driver tab, and then click on uninstall.

  Step 2: To uninstall programs and features, follow the steps in the link below:

   Uninstall or change a program

  Download the last set of drivers from the link provided below.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_top.html?reg=us&c=us&lang=en&prod=mfc7840w_all

  Note: Restart your computer. This should install it automatically a suitable driver for it.

  You can also check out the link below.

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer