Driver Canon Pixma iP4200 Windows 8

Similar Questions

• I need a driver for windows7 for canon PIXMA IP4200 printer

  Please send me a link to printer driver download canon PIXMA ip4200 for windows7. Thank you

  Go to this link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip4200#DriversAndSoftware

  Select your operating system from the drop-down menus and then download the driver you need.

• How to download printer driver Canon Pixma MP240 on a disk with Vista Home Premium installed on the old PC with XP Home not connected to the internet, THE WAY EASY, PLEASE

  I have an old PC running Windows XP Home on the internet, has lost the MP240 printer driver. You want to download the drivers for it on my Vista Home Premium to install in the old PC. I can't get the internet to work with the old PC, or I want to download the drivers directly here. I found a few options for pilots with the Vista computer, but they all want allows you to download the diagnostic and I won't be using this printer on my Vista computer, so I don't want to do it this way. Any place that I can just download the DRIVER ONLY and put it on a disk to load in the old PC. Help, please

  I think you'll find a driver here: http://software.canon-europe.com/products/0010645.asp

  English version: http://software.canon-europe.com/software/0035873.asp?model=

• Cannot install the printer driver (canon pixma ip1980)

  IM using windows 7 (x 64)

  also cannot use add printer in Control Panel > hardware and sound > devices and printers

  -something pop - up and say ' the local print spooler does not.

  -Cannot find the driver on the internet too...

  Please help me... Ive got tons of work to do...

  Hi momo lulamka,.

  1. at the printer works very well under Windows 7 64-bit sooner?

  The compatibility of Windows 7 Center believes that any information on this model of printer there is a possibility that this printer is perhaps not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=Canon%20pixma%20ip1980

  Method 1

  As a work around you can check if the print spooler service is running on the computer.

  A print spooler is the service that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, then Control Panel. In the search box, type Administrative Tools, and then click Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) right click on the print spooler service, and then click Properties.

  (d) under the tab general , next to Startup type, make sure that Automatic is selected.

  (e) if the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

   

  Method 2

  If the above step failure then run the troubleshooter available in the link below.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I was unable to find the drivers for the printer on the Canon website according to the link below, you will need to contact Canon for more information on the pilots.

  http://USA.Canon.com/Cusa/categorySiteMap.action?pageKeyCode=categorySiteMap&nodeCid=0901e02480069f84&expanded=true

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• is driver for canon pixma mp800 included with windows 8?

  is driver for canon pixma mp800 included with windows 8?

  Bring out of the canon site

• Windows 7 can not find .inf driver for Canon Pixma iP4000 printer connected to Windows XP.

  I have a laptop running Windows 7 (64-bit machine) I want to print from.  The laptop is on a home network wireless.  The office is wireless as well and is running Windows XP.  The Office has a Canon Pixma iP4000 printer connected with a parallel cable.  I installed the latest XP drivers for the printer on the desktop.  The laptop can connect directly to the printer with a USB cable and drivers will download automatically and it will print correctly.  However, I can't connect the printer using the wireless system.  I can go on the laptop to the home network and navigate to the printer and try to install.  It makes an automatic search and says that it cannot find the correct drivers.  I can browse to the file to install on my desktop, but it of an .exe file and not. INF.  I run the .exe file and it installs too, but Setup of printer on the laptop won't let me not by the .inf screen add to complete the installation of a wireless printer.

  Any suggestions?

  Very probably the XP driver name is different from the name of 64-bit driver.  Create a Local Port which copies the data to the print size in Windows 7.

  Here is an article knowledge base how to the names of the incompatible drivers.  Replace the Windows 7 machine for NT4 machine referenced in the article.

  http://support.Microsoft.com/kb/282842

  If you load the printer driver 32-bit on your 64-bit computer, you need the 32-bit driver for Windows 7.  You can do if you have a 32-bit computer of Windows 7 on the network to push pilots up to the machine that is sharing the printer.  None are flat files on the Windows 7 DVD, you need to install the OS or mount the ISO.

  The key to successful sharing between computers that run different printing architecture processors is pilot name.  PCL6 equal NOT PCL 6.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Driver for windows 8 for canon pixma mp600 printer

  A driver is available for a canon pixma mp600 printer/scanner for windows 8?

  Canon Support and downloads would be if it is available for windows 8.

• Problem Canon PIXMA MP760 and Windows 7

  Hello.

  I just installed Windows 7 and tried to connect my printer (Canon PIXMA MP760). He finds some drivers it cost but it showd a mistake and this seems to be the main engine.

  I have also tried to download driver from here https://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Canon%20PIXMA%20MP760%20Photo%20All-In-One%20Printer&v=Canon&uid=9792A005&pf=0&pi=4&c=Printers%20%26%20Scanners&sc=Multifunction&os=32-bit

  But when he took out and so now he appears just "check the connection of the cable between the printer and the computer... blabla".

  I tried to reconnect the printer, enable/disable, restart the pc, checked the cable connection +++ but I can't make it work.

  When I go to devices and printers, I see that the scanner of the printer part appears as a device, but not the printer itself.

  Someone has any advice on what to do to get it working?

  EDIT: I also tried to install the printer on another computer with windows 7. Same problem there. :(

  Hi printerhelp,

  Please do not forget to go to the Canon website to download the software and drivers for Windows 7, as the two look update:

  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&ModelId=11010

  If this isn't your correct printer, you should be able to look it up directly on the Canon site.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Driver for Canon Pixma IP4600 printer

  I had to reinstall Windows on my PC due to obtaining a bad virus.  My Canon Pixma IP4600 printer worked before the re - install, but now windows can't find a driver.  I spoke to Canon and they said that they offer is no longer supported, but Windows should continue to support and drivers must come from there.  I tried a driver through Control Panel, but it is said that a driver is not available.  This printer is not that old, so I can't believe that there is no driver available to all.  Can you help me please?

  I'm sorry, but as I explained Microsoft does not write drivers for Canon products.

  Microsoft writes and provides drivers for their own products.

  All drivers that Microsoft may provide in their OS for Canon products provided by Canon.

  I suggest that contact you Canon and get them to set this output or first try the Vista drivers.

  Kind regards.

• I can't access my CanonMX3 printer (Canon Pixma MX320 Series) of my computer running Windows 7, since I've changed in Windows XP.

  I REALLY NEED HELP TO CONNECT MY PRINTER TO MY COMPUTER OVER ETHERNET NETWORK!
  
  I am too having the same problem. But when my Windows 7 detects the printer (Canon Pixma MX30 Series), it says: "cannot connect to the printer access denied." in another window that says: "connection to CanonMX3 on...» Driver search. I installed the drivers in normal installation and also while in Windows Explorer.

  I'm running an T3304 eMachine with concert 1.3 gig RAM 2.0 GHz 100 HARD drive. When I was running Windos XP, I had no trouble to run my printer on my computer. The printer is connected to another computer and I access it through the other computer via ethernet gateway. My ethernet gateway is a Desktop Switch ProSafe NertGear 120/100 5 - port.

  I did everything as I would have done it all by running Windows XP and also used the Windows 7 help files. Everything I read that I made and I am still unable to connect to the printer and print. I went as far as hanging the printer on my computer, and that day, I was actually able to print even if it's with erors. I contacted Canon and downloaded the new drivers for Windows 7 and still no luck.

  When I ran Windows XP I would install the printer on my computer and I have it print to a file and it would be later configuration of the port it to connect through. I have also tried this and no luck.

  What operating system is the computer that has the printer connected to the current?

  Also check the permissions on the printer... is the username of the Win7 PC added to this?

• Problem with Windows 7 Canon Pixma MX870.

  Original title: my PC woes

  I had to re - install my Canon Pixma MX870 after a complete reinstallation of a computer. I've never had any problems. I use Windows 7 Ultimate. Everything went according to plan. Successful installation, drivers - updated, then went to print and nothing - message in the printing of the error box.

  I can't restore anything to an earlier time, as I said it's a full system reinstall. Can anyone help

  Hello

  If this isn't a driver problem there is a problem of setting or material and you
  need to contact Canon.

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, online documentation, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Canon - PIXMA MX870 - software and drivers<- select="" your="" version="" of="">
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx870#DriversAndSoftware

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Impossible to install the CD for printer Canon Pixma MG5320 on Windows 8

  Windows 8 is a strange beast!

  Just bought a Canon Pixma MG5320 to go with my new Inspiron 2330 Touch all-in-one printer...
  After SEVERAL TRIES, it will not download CD Canon!  Somehow, with the USB printer, it will print BUT I can't analyze;  not the end of the world, but I pay $100 + $ for the 3-in-1 printer and would like to get some use out of it other than the printer option.
  There, can someone help me? It's the guest who stops at all of the company:
  "DRIVER IN USE. IF YOU DO NOT USE THE PRINTER DRIVER, IT CAN BE USED BY OTHERS ON THIS COMPUTER.  QUIT ALL APPLICATIONS AND THE PROPERTIES OF THE PRINTER, AND THEN TRY AGAIN.
  IF YOU STILL HAVE A PROBLEM, RESTART THE COMPUTER, AND THEN TRY AGAIN. »
  Well... that has not worked.
  Always prints.  No sweeping.
  Little help!

  I had the same error: printer in use driver. If you're not... bla... bla...

  My printer is Pixma MG3170

  Here's what I tried and it worked for me:

  1. go to usa.cannon.com and download the respective printer for your printer driver

  2. run

  Note: it takes time for the whole installation to complete, but be patient.

  Rgds,

  Andy

• Canon PIXMA MG2120 & printer driver installation to installation problems

  Hello. I just bought a pc laptop ASUS R503U which Windows 8 operating system.  I can't install the driver or complete installation of my printer, a Canon PIXMA MG2120 on my new laptop.  When I try, I get a message that says: cannot install driver mp because it is being used by someone else to the computer.  When this occurs, the installation process is abandoned. I tried to reinstall, disable the firewall, reboot, but I keep getting the same message always. What gives?

  Hello

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, online documentation, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Canon - PIXMA MG2120 - drivers<- set="" to="" your="" version="" of="">
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2120#DriversAndSoftware

  Canon - PIXMA MG2120 - Service and support
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2120#ServiceAndSupport

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Windows 8 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8 - How to troubleshoot printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Canon pixma ip4000 printer works only with Windows 8.1

  Separated from this thread.

  Hai, I have a Canon pixma ip4000 printer, it works fine with my desktop running windows 7, but it didn't with my laptop running windows 8.1

  I can't find any driver support to the Canon Web site.

  Is there any solution for this?

  Looking forward to hearing from you soon.

  Thank you

  Hello Chit,

  Thanks for posting your query on the Microsoft Community.

  I suggest trying to download the latest Windows 7 drivers from Canon Web site and then try to install in compatibility mode.

  Step 1: Download the drivers from the Canon Web site.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip4000#DriversAndSoftware

  Step 2: Installing the driver in compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  You can also provide the following link to check the compatibility of the printer.

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  Follow the Microsoft articles as reference and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  h ttp://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers.

  It will be useful.

• My Canon pixma MG6320 must be connected to my computer does a 'download' a new driver?

  My Canon pixma MG6320 must be connected to my computer does a 'download' a new driver?

  Hi set231,

  When you install a new driver, it is recommended that the PIXMA MG6320 is not connected to the computer.  Please sign in when prompted during installation.