Driver chipset XP will not be installed in the Satellite Pro L20

Similar Questions

• Some devices are not correctly installed on the Satellite Pro A200

  I have the Satellite Pro A200 psae7e. and I also have a problem with the PCI memory controller, Modem device on high definition audio bus, mass storage controller, because they are marked in yellow in the Device Manager.

  My knee works fine... sata works fine, graphic controller & etc. Everything in the natural order. but I don't want the yellow icons in Device Manager.

  How to solve this problem. I installed all the drivers, but there is still that the yellow icons that appear.

  And could someone tell me what is the PCI memory controller? Is that the shared memory?

  PCI memory controller is Intel Turbo Memory, also called chip logic Intel Flash cache
  It s a new technology designed to support the new features of Vista.
  There is no driver for Windows XP because XP doesn t supports the cache feature.

  The component of embedded controller compatible ACPI Microsoft supports the Advanced Configuration and Power Interface (ACPI) AC adapter device objects that the operating system uses to manage the resources of power.
  Seems that you BIOS does not support this!

  Update the BIOS to version XP!

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• Why uninstall Norton 360 will not be installed at the factory? I'm running a new antivirus

  Why uninstall Norton 360 will not be installed at the factory?  I'm running a new antivirus

  It starts to uninstall (the small circle thang) then stops

  I know that with AVG, you must visit the AVG site to install an uninstall program to remove the program... seems absurd, I know, but that's what's happening with AVG... I don't know if something similar should be done with Norton... but you should be able to disable it... right click that the Norton icon in the tray and you should see options, which will be disable IT are other ways, I don't know, but I haven't used Norton.

• Cloud creation will not completely install on the new computer.

  Creative cloud will not completely install on my new computer (Mac).  Can someone help me?  I've logged into my account and want to bring my creative cloud subscription programs.

  You must first install the Creative Cloud Desktop App and use it to install the applications. (see the link below to install)

  The links below can help. If you get a specific error, please let us know the details as well as the operating system you are using and what you are trying to install.

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: How to launch creative Cloud Apps

  FAQ: What should I do if I have trouble to download or install the creative cloud and Creative Cloud Apps?

• VISTA DRIVER DOWNLOADS, BUT WILL NOT ACTUALLY INSTALL...

  A few weeks ago, I was on my computer and it will randomly stop. When I tried to turn it back on, it just kept power off.  Finally, he gave the option to start Windows normally or start Windows repair. I tried to boot normally, it did not work. My computer felt hot so I let it alone for a while. It restarted a few hours later, but this time launched Windows Repair. It has not always worked, so he allowed me to restore to a date, he has already worked correctly.

  Now, it will not install THE drivers or update ALL drivers.  (I have four obsolete drivers).  He will say it's install software device driver, I chose the choice to locate and install the driver. It looks in Windows update. But then he leaves these messages every time: Windows encountered a problem installing the software driver for your device. GOLD Windows found driver software for your device, but has encountered an error trying to install it. Sometimes it is said: the process cannot access the file because another process is used.

  HP has been little or no assistance, given that my laptop is now out of warranty.  They told me to run the Windows File Checker utility, and the results, said: Windows Resource Protection found corrupt files but was unable to solve some of them.  I was also told to perform an audit of the memory and hard drive, but everytime I try, my computer just turns off!  I try to run the Diagnostics but I saw several devices that have been disabled, and I don't know how they got that way.  The final result with HP is always restore your computer to its factory settings, but I don't understand why I should do before I know if it's a hardware or software problem.  If I restore to factory settings, I lose all my programs installed? How do I get those back?  How can I find the facilities? And if I restore, Windows Vista still work properly?  I don't know what to do and I am at my wits end, can anyone help?

  I have a HP Compaq Presario CQ60 - 215DX Notebook PC

  AMD Athlon Dual-Core QL-62 2.00 GHz 32-bit.

  Windows Vista Edition Home Premium. Service Pack 2

  Hello

  Who "felt really hot" worries me. If you have a store of the local computer (the one that is internal
  repairs and not a leek and display a Best Buy or other stores) or HP Support I
  have so look to it. Frankly you should first return it to factory specs and see if
  It works correctly and if not ask such technical assistance indicated previously

  We might be able to help solve the problems, but that would be unnecessary if the heat has
  damage to the computer, which makes it look like is the case. Added that this process of repair is not likely
  work and would take longer to restore the system back and reinstall your programs.

  You need to get your programs from the same source, that you did initially. Make sure that you have
  the product keys needed to install everything. Have your sources and your keys aligned in front of you
  begin the review.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/=.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Java applet will not be installed in the browser

  My VI will not install a JAva Applet. I keep saying "Install Java Applet" and it never prompts for an installation or whatever it is. Any ideas? Is there something I should do that I'm not aware? I've attached a screenshot of the window where is says install.

  I understood the question. Java is messed up on all sorts of ways on my computer. But to answer your question, the site requires java to function and it cannot load java so that it never works.

• Gamepad Xbox 360 as seen in "Device Manager", but not recognized as "Game controller" and will not be installed all the drivers

  My problem is very similar to the one raised here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Xbox-360-controller-seen-in-Device-Manager-but-not/fcf52151-604e-4BF3-BF55-2fa4930bc415
  However, the OP in this question unfortunately never had answer to his question.
  When I plug my Xbox 360 controller on my laptop, my computer recognizes it as a device, but does not recognize it as a game controller. Instead, my device is listed under a category called "Other devices", and the drivers are not installed (he gets the little warning sign yellow after the icon).
  I tried to install the correct 'Microsoft Xbox 360 accessories' (http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows (Windows 7 64-bit)) and direct the machine to install its drivers from there, but nothing helps.
  I've tried right-clicking on the device, by clicking 'Uninstall', out in him plugging, uninstalling and reinstalling Microsoft Xbox 360 accessories, restarted my computer and each unique combination of these things.
  I tried to talk to an Ambassador of Microsoft, who told me to update the driver and manually make a 'human interaction device', but unfortunately it did not work.
  I called Support of Windows games, who gave me information from these links:
  support.Microsoft.com/kb/908888
  support.Microsoft.com/kb/906347
  Outside of download the drivers manually in the form of 'Microsoft Xbox 360 accessories' (which I already have), I wasn't able to try all of the hotfixes listed in the guides, because my camera is not listed as a joypad or human interface device. It is simply listed as "Xbox 360 Joypad" and it is listed under the heading "other devices."
  It seems that there is just something wrong with my USB and it's just is not installing drivers properly, but this isn't the case. I plugged many other devices, including an iPod, a mouse and an external HARD drive, which all had their drivers properly installed and works great.
  I also know that it is not a problem with the xbox controller, that I plugged into another laptop (also Windows 7 64-bit), as well as pilots very well on the other laptop.
  I'm really puzzled by this situation. Any help would be greatly appreciated, but please do not repeat the information or links I listed here, or who was in the last question which I quoted above. Thank you for your help.

  UPDATE: I finally got to work. Everything is beautifully detailed in this video from Youtube:

  http://www.YouTube.com/watch?v=kxa5CJsDzwQ
  Here's what you do:
  1. plug your device and go to Device Manager
  2 right click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject) and click on "Uninstall".
  3. disconnect your device
  4. If you have not already done so, download and install the appropriate for your device 'Microsoft Xbox 360 accessories' program
  5. plug your device back on and go back to Device Manager
  6 right-click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject), but this time click on "update driver software".
  7. click on "browse computer driver software.
  8. click on "Let Me pick from a list of drivers for devices on my computer.
  9. Select "Microsoft Common Controller" and then select your device. Have it install this driver. From there on, it should work on.
  If you have any questions, my email is * address email is removed from the privacy *.

• C4580 Set - up - will not be installed on the PC XP Home Edition

  Hello

  Happy Thanksgiving all!

  I almost gave up trying to get my C4580 all-in-one installed on my PC XP Home Edition.

  Has anyone else encountered this problem.

  XP won't allow hp imaging to register.

  Message edited by Trentmd001 on 11/30/2008 07:21

  Trentmd001 wrote:

  The MSI.dot4wpt error. hpmiapi.dll will not fit.

  I think that I had your same problem, or at least very similar. The error that I had 'MSI.dot4wrp", not"MSI.dot4wpt ". I sent a detailed cause and solution to HP, but apparently, they don't have it entered into their system.

  Your errors look something like that... http://sites.Google.com/site/hpc4580installproblem/

  The solution was to run "regsvr32 c:\windows\system32\atl.dll" in the window start: run. After that, Setup completed without error.

  After I got the software finally installed and everything works, my C4580 would freeze sometimes every day or so and forcing me to unplug the power cord. It is a separate issue if... http://forums.MacRumors.com/showthread.php?t=571026

  Hope this helps,

  Mark

  Message edited by msmn4393 on 02/12/2008 10:01

• PSE 13 Win 8.1 will not be installed, "detects the computer restarts" even after the computer restarts

  PSE 13 Win 8.1 will not, install "detects the computer required restarting" even after restarting the computer.

  The Mac version has installed fine on my desktop.  I now want to put the PC version on my laptop.

  Problem solved.  Seems to have been a combination of HP Support Assistant, eager to check updates and Avast2015 are not satisfied with some aspects of the installation.  Ended up uninstalling Avast, installation of PSE 13 and then re - install Avast.

• Not possible to recover the Satellite Pro with recovery CD

  I have a laptop Pro satellite that I set for my sister in law... .long history... (don't remember model No, as I m at work at the moment!) but its only 4 weeks old and she had done something redicuous in it, so I decided I would use the recovery cd to reinstall the operating system.

  Decompresses the image on the disc, it tells me to remove the source, and then restart your computer. On reboot, the system is fair in the xp loading screen then a windows message will appear saying "Windows is not fully installed - please run the Installer", then it restarts!

  This is a common problem, or anyone can shed some light on this, since it is a new laptop, nothing done to the material and I'm using the correct cd that came with the system.

  The system went twice in xp and started the installation wizard (where you put in your usernames and passwords), once this finishes and he attmpts to go directly into xp, I get a blue screen and the inevitable gel!

  I don't want to sound pious, but please don't ask me if I checked the hardware is attached or anything, I'm actually a technician for a farm, I have just no experience of this problem of recovery cd or the Toshiba machines.

  Any help guys out there could give me would be greatly appreciated as Id hate to have to return a bloody new laptop to the manufacturer, unless its absolutely necessary.

  Thank you very much
  Andy

  Hi Andy,.

  The restore CD contains a "ghost image" of the operating system that will contain the system of basic Windows and most of the drivers and specific software from Toshiba.

  Boot from the restore CD normally takes a Win98 operating system and then restore the image of "ghost" on the hard drive.

  Normally, the recovery process will ask you if you want to restore the entire C: drive or use the 'expert' mode in which you can partition the hard drive. Obviously if you reach the point where the system then restarts the restoration of the "ghost" image is complete and the Windows installation process began

  I can only assume that there must be a problem with the disk hard if the 'Set up' process problems later. As an IT professional, you can access a boot CD appropriate (such as Norton Disk Doctor) in which case I would suggest scan you the hard drive for potential and problems if necessary to return the laptop under warranty for repair.

  Kind regards

• Driver Chipset Intel will not update

  I have a Pavilion d5-1150us h/p with Vista x 64 home premium OS.  I have successfully downloaded SP39549.exe to update the chipset and the files are in C:\SwSetup\Sp39549.  Obviously, SP39549.exe worked successfully and put the files in this directory.  I've lived the process of uninstalling/installing several times without success.  I keep ending up with the driver v6.0.6001.18000 (21/06/2006) and Vista keeps advising them that this is the last update.  Intel update utility driver recommends going h/p for the update, h/p changed their update.  So here I am.

  How to update this driver?

  Thank you very much for sticking with me on this.

  The first link did not work, but the second was returned it was not validated for this computer - go to mfgr.  Well!

  This version was 7.15.10.1828 and I 7.15.10.1502.  I'm done with this version using the h/p softwatre download 7.15.10.1554A, available on the site to upgrade.

  This has been an interesting learning experience, and I can see all kinds of improvements that could save us a lot of energy.  If you have any 'pull', you might want to pass on my suggestions.  They will definitely increase the satisfaction of the customer and save money h/p - both are very good goals.

  If h/p is to follow with the documentation that make most of the companies, I would say that you help us in organizing the updates by the model of the computer, then the serial number.  I went to a lot of trouble and time to go to the bottom of the list of available updates to find those who have requested to me.  I found 7 of 42 ads that have been adapted to my situation.  Better yet improve h/p update and health check to be more precise and do the job they are presented like this.

  I know that the upgrade of drivers is a delicate proposition because I've lived before.  As before, you had a place to go to check that particular drivers were available.  They weren't Intel h/p.  So in order to improve things more far why don't h/p send you to the appropriate download you did?

  A couple of confusing things are always present in my mind.   Why can we not adapt an anothers version numbers when we talk about the same drivers?  Windows has a version, Intel has a version and h/p has a version - now that's a lot of duplication and confusion!  Another is what chipset do I?  I have three different references - h/p, Intel, and device manager.  I still don't know that the one I have.  Can we not standardize in this industry - after all, it is a "COMPUTING" industry and equipment is at the height of the automation.

  It is Plug-and-Play, and now it's wearing on your HARD drive with constant revisions.

  Well, I do thank you for having me this far and I will continue looking for why I can't update my driver!

• I have windows me and I am trying to install windows xp on my drive and it will not be installed. How can I fix it?

  I have the disc for xp that I bought. It has been installed on this computer before. I had to restore the computer and now I can't reinstall xp from the disk.

  Hello

  ·         What is the exact error that you are experiencing when you try to install Windows XP on the system?

  ·         You have the full version of the Windows XP operating system or upgrade disk?

  ·         Are doing a clean installation of Windows XP or install an upgrade?

  Make sure that the XP CD is not damaged. If you have the upgrade disc you can not make a format installation. You can only switch to the older operating system to windows XP. I suggest you follow the steps mentioned in the article given below to install Windows XP on the system.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

• Games will not be installed by the internet download

  stops the installation when downloading on Internet

  Download the installer to your desktop and right-click on it, and then click Run as administrator.  It sometimes works when standard installation procedures only.

  If this does not work, please transfer your question in the Forum http://social.answers.microsoft.com/Forums/en-US/vistagaming/threads games where people who specialize in the installation of games among other will be more than happy to help you with your problem.  Please post the name and the version of the game you want to install (and a link to the download site) as well as which version of Vista you are using when you post here in order to get the best possible service.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• External mouse and keyboard do not function correctly on the Satellite Pro C650

  I have problem with my external mouse and an external keyboard. All started about 3 weeks ago. They freeze, jump or a stop, the most annoying is the mouse, I need to plug it back usually. This will work well about 1-5 minutes and once again. Touch Pad works well.

  I have installed the latest Windows updates, also downloaded and installed the drivers from Toshiba web. I configured the default BIOS settings. Nothing helps.

  I don't have a recovery disk to try it. Is there any solution other system recovery/reinstallation then?

  Someone had this problem?

  Hello

  It is not easy to say on this issue.
  Do you use wireless devices? Are the batteries OK?
  Have you noticed the same problem with other USB devices?
  I assume that the two uses of devices USB port of your laptop.