Driver does not properly
I am running Vista Ultimate. Whenever I shut down the computer during the night and start the next day, he is not load the driver for my ethernet card and get a red check the trayicon for my internet. But if I can re - install the driver Nvidia and let the computer restarts, the driver correctly loads!
I tried different drivers, older versions, etc., but nothing works better! And what I think, although I may be wrong and am usually is more early then he must have the pilot hung something else during a normal boot, but I don't have the slightest idea how to check this, or even if the evolution when its loading is possible.
Any ideas would be greatly appreciated!
Hi long hair,.
I suggest temporarily disable your security software, installation of the driver and restart the PC to see if it solves the problem:
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Graphic drive does not properly.
Graphics driver does not properly. Screen will Dim and must restart to resume use. Occurring more frequently now. Y at - it a fix for this problem?
Problem does not occur in safe mode. Failure seems to occur on any key or the video style.
Any material support is the manufacturer of the hardware regardless of the operating system that you choose to use. As it is unlikely that you have a Microsoft video/graphics card - one you have and have you downloaded and installed the latest drivers/software they provide for your particular device?
-
CD/dvd drive does not properly
drive will read DVDs but not cd. Once in a while, it will read a cd, but it shows the cd as empty (no space) I know that the cd is full. any help would be appreciated
Hello
You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.-----------------------------------------------------
Several good info here:
http://Club.myce.com/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
DVD/CD driver does not properly, the discs are not read.
I tried different discs and none are read which is very annoying, because I can not install my new printer! When I checked the driver, the following message is displayed:
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
I click for solutions and he's looking for a few seconds and then nothing happens. I tried it 3 days ago and still today, but it still does not work, can I do?
Thanks in advance for any help
Hello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.Normally the above will solve this problem otherwise working your way down through them, even if you did
them before.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsSome DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
Satellite 3000 514 graphics driver does not properly
Hallo,
When you use the above mentioned Notepad I allways get a warning message after only 20 minutes of win xp.
It is said the graphic driver nv4_disp does not work correctly and the display is only one
quarter of the size that it used to be.
It can also be a problem with the inverter or if all of the graphics device is broken?thx for any help!
Sven
Hi guys
Hardware or software problem? In my opinion impossible is nothing.
But first, I recommend an update to the latest graphics card driver.
See the page of the Toshiba driver. -
Audio driver does not properly
I have problems with the audio driver after reinstallation of Windows 7 on my Dell XPS L520X.
Restarting windows sound does not work, after that application troubleshooting it arranges temporarily and gives the message this problem with Realtek High Definition Audio Driver.
But I reinstalled my drivers realtek I also tried without them, but the problem persists.
Any way to fix this error or a way to find out what is the cause?
Given that you have reinstalled Windows 7 on the XPS L502X (I guess L502X because there is no L520X that I've heard of).
See my Guide for reinstalling Windows for more details:
http://philipyip.WordPress.com/Dell-community-forums/
Have you installed all the drivers in the correct order?
Also uninstall the Realtek High Definition Audio Driver of add/remove programs and Device Manager (there is a section about uninstalling the drivers via Device Manager). Restart the computer and then re-attempt the driver installation.
You can also post on the Forum of Audio for Dell laptop. Jimco is an expert regarding Audio problems with Dell systems and publishes regularly on this forum: http://en.community.dell.com/support-forums/laptop/f/3517.aspx
-
For Win 7 64 bit - adobe drive does not properly.
Several downloads Adobe player and it does not work for me. How can I solve this problem? Being not messaged by computer that the program is install, however, no plug in is installed. How do I fix this?
Hi, Ethel,.
Let me know on the following two points.
1. open the control panel of windows. Top-right, next to discovers by: select "Large icons" in the drop-down list. In the displayed list now, click 'Flash Player (32-bit). In the Flash drive Manager window, click the Advanced tab. Let me know the ActiveX Version: and the plugin Version: shown here.
2. click on the Menu start, open all programs and click Internet Explorer (64-bit) - this version of Internet Explorer also pointed out that the Flash is obsolete?
Kind regards
DP - K
-
Satellite 5200: lines on the screen - driver does not properly
Laptop: Satellite 5200 702
A few days ago, my laptop screen went all funny lines, came to the screen in a form of flickering green, the laptop froze and then the driver failed. The funcitons still mobile but I have these lines always start the toshiba XP loading screen system, so I know it will be a hardware problem. I have attached an external monitor to confirm that this is not a screen problem.
Sometimes I turn on the laptop and the screen will be fine and loaded drivers, but that only lasts for about 2 minutes then XP lock ip, blue screens and reboots. Then once it to load with the dirver does everything wrong.
I took the flat laptop cleaned and looked for something sensitive which could be causing it? I have not changed or verified the memory of the laptop, if it's an idea to do?
Any suggestions?
Hello
This really looks like to me a graphics card failure. What do you think?
Have you tried recovery of the operating system with the recovery CD Toshiba delivered? If this is not the case, try to install the OS from CD. Then you can be sure that the issue is not relegated to a malfunction of the software (driver) to 100%.But generally, I don t think you can fix it yourself. I m not sure if the graphics card may be withdrawn or entire motherboard but if it s a bad hardware work if the part needs to be replaced.
If you have no significant experience in the laptop repair, then you should ask a technician for help. -
printer driver does not properly download
My printer is model Deskjet 3050 J610. After I download the driver package "DJ3050_J610_1315.exe - do open it, the extracted file is not the printer file. Keep wanting to install ' Samsung mobile phine software.
I ran the doctor print and scan. He finds nothing wrong. I'll just leave as is.
Thanks for your help though.
-
Pavilion g6 2303sh 7650 Radeon graphics driver does not properly with Windows 7 (Code 43)
Hi all
I can't get my radeon card to work on a new installation of Windows 7. In the device manager it is a sign of warning on the name of the card. The camera has error code 43, but not other information on what might be wrong.
I tried to reinstall the latest drivers AMD (not beta) at least a dozen times, but nothing works.
Hello:
Here is the link to the W7 x 64 driver which you are interested.
There is no W7 32 bit driver for the 7670M graphics card, then you must either install W7 x 64 or live with what you have now.
-
Satellite Pro A60: ati2dvag display driver does not properly
Help... I know very little about the computer and need to know what, how and where I can get a solution to this problem. It happens more often now, will damage the screen and I have to restart only to make it happen. I tried to down load bios 1.90 and hope that it works as some similar ports have said, but what can I do else? any help from anyone would be great
[Edited by: admin August 19 05 23:28]
Hello
Well, you can try to restore your system. If the problem remains the best way is to contact the Toshiba ASP. You can find the right partner on this site:
http://EU.computers.Toshiba-Europe.com
Good bye
-
Driver does not load correctly
Some time previously, I've updated my HP Officejet 6480 all in one software and since then, the drivers do not load correctly. Whenever I start my computer I get an error while loading programs are. It is said that a driver has not loaded correctly. I am running Windows 7 home. It may have started when I upgraded to Windows 7, 64-bit XP and loaded the new software from the HP website. I don't remember exactly. Today I tried to send a fax from the solution Center and found that the "Send a fax" button is irrelevant. Since I am able to send faxes from the buttons on the front panel on the printrer, I guess that the driver does not properly is the fax driver. All other functions work. I uninstalled the software from the control panel in Windows 7 and downloaded and reinstalled the software several times without success to resolve this problem. Any ideas how I can fix this problem? Thank you.
Hi Dave46a,
Welcome to the HP Forums!
I see that you have trouble to install your HP Officejet 6480 to your Windows 7 PC.
I would try the following:
1.) use Microsoft Fix It to uninstall the software. Select Windows, click on install or upgrade software or hardware, click on install or remove programs, and then click Run now next to correct problems that programs cannot be installed or uninstalled. (Use this to remove the printing software).
2.) try using the printer HP install wizard for Windows for the re - install.
(3.) to run the HP print and Scan Doctor to see if other errors occur.
Hope this helps and have a nice day.
-
Satellite P200 accidents + message: graphic card driver does not work properly
Hello
hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.
When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.
It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.
I ran a system restore but the problem remains.
I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.
Matt
Hello
Sounds like the GPU problem.
But try the graphics card driver update.
Use the most recent driver for your graphics card.In addition, clean the fans of portable computers.
Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.If this is not enough, then a problem of graphics chip would be possible.
-
ATI Graphics Driver does not work properly
All of a sudden when I play my games on Facebook my computer completely freezes. Reports error saying that the ATI Graphics Driver does not work properly.
I have checked all the updates of Windows, said that I installed all available updates. Help, please!Hello
First manually check the updated drivers with ATI and ask their support and Forums on all known
questions. Use the methods to update the following drivers.Download the Catalyst Drivers here
http://game.AMD.com/us-en/drivers_catalyst.aspxATI - Forums
http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11ATI - Support and drivers
http://support.AMD.com/us/pages/AMDSupportHub.aspx============================================================================
Other troubleshooting methods would include the boot minimum and others who might help determine
the cause and eliminate problems.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
ATI graphic driver says error message does not properly
I constantly get a message indicating that the ATI graphics driver does not work correctly. I downloaded an update, but then got another message indicating that the file is not found. Can you help me please?
Hello
You mean you downloaded an updated driver? Download it again and note where you
put it as indicated in the driver updated of the methods below.Download - SAVE - go to where you put them - right click – RUN AS ADMIN - REBOOT
After each installation.Check with ATI (manually), supported drivers and their forums as they could be called
questions.Download the Catalyst Drivers here
http://game.AMD.com/us-en/drivers_catalyst.aspxATI - Forums
http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11ATI - Support and drivers
http://support.AMD.com/us/pages/AMDSupportHub.aspx================================================================
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - graphics card - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on set to update driver
(this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with
their own software and drivers and all other main drivers that you have.Now in system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), then the manufacturer of the device
site (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and)
software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AS ADMIN - reset after each
installation.Always check in the Device Manager - tab drivers version you install actually shows up.
This is because some restore drivers before the most recent is installed (particularly that audio drivers) so
install a driver - reboot - check that it is installed and try again if necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Maybe you are looking for
-
his order after you have installed the hp dc7900 low profile video card
I installed a hpcompaq dc7100 low-profile video card. Since then the sound has stopped working. anyway to uninstall the audio portion of the video card and use the original computer sound card? or any other suggestions to have the computer see the ne
-
Min datter pa 5 trykket pa any taster pa pcen, og sa snubbe skjermen grader seg i 180
-
I recently migrated an admin to a new account admin account, because the taskbar was faulty. I deleted the old admin account and the old user folder, but now the new user folder has a lock on it and it doesn't allow me to rename. I tried all the proc
-
How can I remove connection to work/school?
How can I remove connection to work/school? recently I went to work in an elementary school. and they would throw a computer. I asked if I could have instead of him be trashed. they gave to me and it works. but the problem is that I get this screen!
-
BlackBerry Smartphones HELLO, I am a new Member, good LUCK EVERYONE
Hi, I was in VIETNAM. I love the blackberry 8700 rogersI want to buy this phone, please help me...